TRACK ADJUSTER
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
AI Contract Overview
The Track Adjuster is a defense component manufactured through a forging process, with detailed technical requirements governed by multiple drawings and quality assurance provisions, including Drawing 12292056 and Revision C of the Technical Data Package. The item is subject to stringent material specifications, notably requiring Epon Resin 828 with Versami 140 curing agent in lieu of the canceled MIL-R-21931 standard. The acquisition is a Women-Owned Small Business Set-Aside under NAICS code 336992, with a total requirement of 155 units delivered across three line items, the primary quantity of 43 units having a delivery window of 498 days from award, with an original required delivery date of April 11, 2028. FOB origin delivery applies, and inspection and acceptance occur at the manufacturer’s facility under FAR 52.246-2, requiring compliance with ISO 9001:2015 or equivalent quality systems. The contractor must maintain approved first article units as manufacturing standards and adhere to DLA-specific packaging protocols, including SPI AK 11024540 Revision D and MIL-STD-2073-1E, with marking in accordance with MIL-STD-129 and special requirements for hazardous materials under 29 CFR 1910.1200 and IP025. Contract compliance extends to cybersecurity, export control, and environmental mandates. NIST SP 800-171 requirements are enforced through DFARS clause 252.240-7997, and the item contains technically controlled data subject to ITAR or EAR, requiring prior government authorization for any export or disclosure to foreign persons, including U.S. subsidiaries and foreign nationals on U.S. soil. Only DLA contractors with approved JCP certification, completed export control training, and DLA authorization may access this data. The use of additive manufacturing is prohibited, and offers incorporating such methods are ineligible. The Buy American Act and Berry Amendment govern material sourcing, and contractors must affirm compliance with all Federal, state, and local environmental regulations. Submission via WAWF is mandatory for payments, using either invoice-receiving report combinations or combo documents, and all parties must maintain active SAM registration. Further, contractors must avoid coercive arbitration agreements, prohibit hexavalent chromium, and adhere to trafficking in persons and employment eligibility verification standards.
General Info
Agency
NAICS
Place of Performance
REC OFFICER 442-295-4148, BARSTOW, CA, 92311-5014, USSet-Aside
Timeline
Response Deadline
Organization & Contact Information
Full Description
TRACK ADJUSTER
A forging process was identified as a means to manufacture this item. Tooling is required to produce a forging. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C<(>&<)>E Supply Chains) https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/; (Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil. RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) EXCEPTION TO DATA: CAGE 19207 DRAWING 12292056 NOTE 2. IN LIEU OF MIL-R-21931 (CANCELLED W/O REPLACEMENT) USE EPON RESIN 828 WITH VERSAMI 140 CURING AGENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS
LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A
SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR
QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN
PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED
MANUFACTURERS LIST (QML)" APPLY.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS
SPE7L3-26-T-115T
SECTION B
252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 2530-01-102-4540 Quantity: 43 EA Purchase Request: 7017440944QTY: 155 Delivery: 498 days ADO