Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

TRAINING AID, CHEST SEA

Active
SPE2DH-26-T-5612Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This training aid is designed specifically for practicing the application of vented and occlusive chest seals, mimicking the form and function of the Hyfin vent chest seal but with a less aggressive adhesive suitable for repeated use on both human skin and training manikins. It includes a gauze pad in each package to properly prep the wound surface prior to seal application, ensuring realistic training conditions. The device enables trainees to accurately practice placement of the chest seal and the vent component over a simulated wound, reinforcing critical field techniques. The product is latex-free and packaged in units of two seals per package, with the procurement requiring ten packages. The item is identified by NSN 6910-01-690-8679 and is subject to technical and quality requirements referenced in the DLA Master List, with packaging and labeling governed by DLA standards. Bidders must provide the source and part number being supplied. The solicitation, issued under SPE2DH-26-T-5612, has a response deadline of August 5, 2026, with delivery expected within twenty days after order award. The contract is managed by the Department of Defense through the Medical Supply Chain FSH office, with performance occurring in Annville, Pennsylvania, and primary point of contact being Tina Vu.

General Info

Latex-free chest seal training aids with gauze prep, two per package, ten packages required, delivery in twenty days.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSHView Agency

NAICS

339113 - Surgical Appliance and Supplies ManufacturingView NAICS

Place of Performance

FORT INDIANTOWN GAP FTIG, ANNVILLE, PA, 17003-5003, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIIN FSH
View Agency Profile
Office AddressUS
Contacts
Tina Vu
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
TRAINING AID,CHEST SEAL WOUND
TRAINING AID, CHEST SEAL WOUND
..
TRAINER FOR HYFIN CHEST SEAL; PROVIDES TRAINING
FOR VENTED AND OCCLUSIVE CHEST SEALS; UTILIZES
THE SAME TEMPLATE AS THE HYFIN VENT CHEST SEAL,
BUT USES LESS AGGRESSIVE ADHESIVE DESIGNED FOR
EFFECTIVE CHEST SEAL APPLICATION ON BOTH HUMAN
SKIN AND TRAINING MANIKIN; ALLOWS FOR TRAINING
OF PROPER PLACEMENT OF NOT ONLY THE CHEST SEAL
ITSELF, BUT ALSO OF THE VENT OVER A SIMULATED
WOUND; LATEX FREE; EACH SEAL PACKAGED WITH
GAUZE PAD TO WIPE WOUND SURFACE PRIOR TO CHEST
SEAL APPLICATION.
..
UNIT OF ISSUE: PACKAGE (PG) OF 2 EACH
..
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
..
BIDDER SHALL SPECIFY SOURCE AND PART NUMBER
BEING SUPPLIED.
..
ADEQUATE DATA FOR THE NSN/Part Number: 6910-01-690-8679 Quantity: 10 PG Purchase Request: 7017659296QTY: 10 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339113
New
DIBBS
WRENCH, OXYGEN, MEDICAL
Solicitation # SPE2DS-26-T-284L
A specialized wrench and chain assembly booster is specified for exclusive use on medical-grade oxygen bottles, serving as a critical line item component of the POGS-10 oxygen generator and microboost system. The item is directly linked to two end equipment NSNs—6530-01-505-0207 and 6530-01-500-8337—and is included on the U.S. Army assemblage list to support operational capabilities. It is procured in units of one each, with a required quantity of 357 units under purchase request 7017364088, and must be delivered within 131 days after award. The solicitation, identified as SPE2DS-26-T-284L, was posted on July 29, 2026, with responses due by August 4, 2026, and falls under NAICS code 339113 for medical equipment manufacturing. Bidders must clearly state the source and part number being supplied, and compliance with DLA packaging and technical quality requirements is mandatory, as outlined in the DLA Master List of Technical and Quality Requirements. Government identification must be removed from non-accepted supplies, and the point of contact for inquiries is Chandler Alvarez, reachable via email or phone. The place of performance is Jacksonville, Florida, with a zip code of 32212-0103.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339113
New
DIBBS
SPECTACLES, INDUSTRI
Solicitation # SPE8E6-26-T-3915
The contract pertains to the procurement of industrial spectacles under NSN 4240-01-729-1324, with a quantity of 10 units, each priced at $10.00, for a total of $100.00. Delivery is required within five days from the date of contract award, FOB origin, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and all packaging must comply with DLA Master List of Technical and Quality Requirements, specifically RP001 for packaging, MIL-STD-129 for marking and labeling, and either TQ IP025 for hazardous material or ASTM D3951 for non-hazardous items, with DLA requirements taking precedence. The items must be shipped by traceable freight methods, not parcel post, to the designated military address at Camp Lejeune, NC. The contract references multiple DLA directives governing technical standards, source approval documentation, and removal of government identification from non-accepted supplies, with all provisions governed by the active revision of the DLA Master List as of the solicitation or award date. The solicitation number is SPE8E6-26-T-3915, with a response deadline of August 10, 2026, and the required delivery date is July 30, 2026. The point of contact is John Lieb, and the North American Industry Classification System code is 339113 for optical instrument manufacturing.
Defense Logistics Agency

POSTED

about 19 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339113
New
DIBBS
SHEET, BURN-TRAUMA D
Solicitation # SPE2DS-26-T-283S
The burn-trauma dressing is a sterile, non-woven fiber sheet measuring 60 inches by 90 inches, designed to protect burn patients from infection by creating a barrier environment. It is latex-free and can be used either folded for targeted application or unfolded as a full-size emergency dressing. The item is packaged in cases of twelve units each, with the NSN 6510-01-733-6285 and a shelf life of 36 months that cannot be extended, governed by RS001 requirements for type I (code Q) items. Technical and quality standards referenced in this procurement are defined in the DLA Master List of Technical and Quality Requirements, with applicable revisions tied to the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and government identification must be removed from non-accepted supplies. The contract solicitation number is SPE2DS-26-T-283S, issued on July 29, 2026, with responses due by August 4, 2026. One case is required to be delivered within 20 days of award to the specified APO location, with Seth Tootell of the Department of Defense's Medical Supply Chain as the primary point of contact.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339113
New
DIBBS
SYRINGE, LABORATORY
Solicitation # SPE2DH-26-T-5613
The contract solicits 300 packages of 10 cc laboratory syringes, with each package containing 100 units, for a total of 30,000 syringes, under the NSN 6640-01-678-1647. Delivery is required within 85 days after award, and the purchase request number is 7017674629. The solicitation is issued under SPE2DH-26-T-5613, with a response deadline of August 5, 2026, and was posted on July 29, 2026. The National Industrial Classification System code is 339113, and the procurement is managed by the Department of Defense through the Medical Supply Chain FSH office, with performance located in New Cumberland, Pennsylvania, zip code 17070-5002. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and the applicable revision depends on whether the acquisition is simplified or large, with the controlling revision determined by the solicitation or amendment date. Packaging must comply with DLA packaging standards, and suppliers must remove all government identification from non-accepted supplies. Primary point of contact for inquiries is Tina Vu, reachable via email and phone provided.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
SUTURE KIT, SURGICAL
Solicitation # SPE2DS-26-T-284G
The Defense Logistics Agency, under the Department of Defense, has issued a solicitation for a SUTURE KIT, SURGICAL with NSN 6515-01-309-3551, requesting a quantity of four units. The solicitation, identified by number SPE2DS-26-T-284G, was posted on July 29, 2026, with responses due by August 4, 2026. This procurement is designated as a federal action and does not specify any set-aside preferences or NAICS codes. The kits are intended for delivery to a U.S.-based performance location, though no specific city or state is provided. All inquiries and submissions must be directed through the DIBBS platform via the provided UI link, and no point of contact information is listed in the solicitation details.
Defense Logistics Agency

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339113
New
DIBBS
HELMET, WELDER'S
Solicitation # SPE8E6-26-T-3923
The contract is for the procurement of 70 welder’s helmets identified by NSN 4240016459397 and part number 805438-08, awarded under solicitation SPE8E6-26-T-3923 with a response deadline of August 10, 2026. The total quantity is split into two line items: 40 units and 30 units, each priced at $1.00 per unit, totaling $70.00. All items must be delivered within 196 days of contract award with delivery terms set at FOB origin, inspected and accepted at destination, and subject to zero variance in quantity. Packaging and marking requirements conform to MIL-STD-2073-1E and MIL-STD-129, with palletization adhering to DLA’s RP001 packaging standards. Items must be shipped to two designated DLA distribution centers—one in New Cumberland, Pennsylvania, and the other in Tracy, California—each with specific shipping addresses and handling instructions. Technical and quality requirements referenced by R and I numbers are governed by the DLA Master List, with applicable revisions determined by the solicitation or award date based on acquisition type. The helmet is classified under NAICS code 339113 and falls under Department of Defense procurement, with John Lieb listed as the point of contact. All packaging and shipping must comply with hazardous materials provisions and DLA transport procedural notes C19 and C20.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 19 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339113
New
DIBBS
DRESSING, OCCLUSIVE, ADH
Solicitation # SPE2DS-26-T-284U
The contract solicitation is for an occlusive adhesive dressing identified by NSN 6510-01-234-8943, with a single-unit purchase request numbered 7017660495. The solicitation, issued under number SPE2DS-26-T-284U by the Defense Logistics Agency under the Department of Defense, was posted on July 29, 2026, and requires responses no later than August 4, 2026. The procurement is classified as a federal solicitation with no specified set-aside type or NAICS code, indicating it is open to general federal contractors. The place of performance and point of contact details are not provided, but the solicitation can be reviewed through the official DIBBS portal using the provided UI link.
Defense Logistics Agency

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339113
New
DIBBS
GLOVE, PATIENT EXAMI
Solicitation # SPE2DS-26-T-284R
The contract is for the procurement of 2 boxes of patient examining gloves, each box containing 100 gloves, designated by NSN 6515-01-673-0527. The gloves are stretch vinyl, latex-free, disposable, ambidextrous, aloe-coated, powder-free, non-sterile, and feature a beaded and snug-fit cuff. They are sized X-Large, colored green, with a length of 9 inches and a thickness of 6.7 mil. The unit of issue is a package of 100 gloves, and the product must have a shelf life of 36 months, with no more than five months elapsed between the date of manufacture and the date of delivery to the government. All supplies must comply with DLA packaging requirements and technical quality standards referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The government reserves the right to remove its identification from non-accepted supplies. Delivery is required within five days of award, and the solicitation was issued under contract number SPE2DS-26-T-284R with a response deadline of August 4, 2026. The contracting office is part of the Department of Defense’s Medical Supply Chain under the MD Surg FSF, with performance directed to Williamsburg, Virginia, and primary point of contact being Patrick Esposito.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339113
New
DIBBS
SUCTION UNIT, AIRWAY KI
Solicitation # SPE2DS-26-T-284B
The contract solicitation is for a Suction Unit, Airway KI with NSN 6515-01-364-1047, under purchase request 7017673928 for a quantity of two units. It is issued by the Defense Logistics Agency under the Department of Defense through solicitation number SPE2DS-26-T-284B, with the posting date of July 29, 2026, and a response deadline of August 4, 2026. The solicitation is classified as a federal procurement with no specific set-aside designation, and the place of performance and office address details are not specified, though the country code is listed as the United States. Interested parties can access the full solicitation through the DIBBS portal using the provided UI link.
Defense Logistics Agency

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339113
New
DIBBS
CONTAINER, THERMAL, BLOO
Solicitation # SPE2DH-26-T-5619
The thermal blood transport container, identified by NSN 6530-01-654-0062, is designed to safely carry two units of whole blood under controlled temperatures, featuring an insulated inner box enclosed in a Multicam-colored nylon outer pouch with a carrier for secure attachment to personnel harnesses. This unit is sold individually and must meet all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on the acquisition type. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed prior to return. The contract falls under NAICS code 339113 and is managed by the Department of Defense’s Medical Supply Chain FSH, with performance required in Williamsburg, Virginia. Bidders must clearly indicate the source and part number being offered. The solicitation was posted on July 29, 2026, with responses due by August 5, 2026, and delivery must be completed within five days of award.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
CONTROL, GLUCOSE
Solicitation # SPE2DS-26-T-283Y
The contract specifies the procurement of Prodigy Glucose Control Solution, Low Level 1, in 4 mL units, compatible with all Prodigy brand glucose meters and intended solely for in vitro diagnostic use. The product must have a guaranteed shelf life of 24 months, with no more than three months elapsed from the date of manufacture to the date of delivery to the government. Storage must be at room temperature and freezing is strictly prohibited. The solution is regulated by the FDA and must be sourced from approved manufacturers, specifically Prodigy Diabetes Care LLC or Cardinal Health 200, LLC, with their designated part numbers. All packaging and labeling must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and adhere strictly to DLA’s Packaging Requirements for Procurement, with commercial packaging in accordance with ASTM D3951 unless otherwise overridden by DLA's technical requirements. The unit of issue is each, and packaging must protect against damage and ensure safe transport via common carriers at the lowest possible rate. The contract includes two line items totaling two units, each priced at $2.00 and $4.00 respectively, with firm fixed prices and zero tolerance for quantity variance. Delivery is required within five days of order placement, FOB destination, with inspection and acceptance occurring at the point of delivery. Shipments must use the fastest traceable means and are prohibited from using parcel post. Two distinct delivery addresses are specified: one at Fort Bragg, North Carolina, and another in Melrose, Massachusetts, each with assigned tracking codes and logistical identifiers. The material is not classified as hazardous per Fed-STD-313 and must be labeled with the appropriate government identification, with strict compliance required for all packaging, marking, and palletization standards. The solicitation number is SPE2DS-26-T-283Y, with a response deadline of August 4, 2026, and required delivery dates set for July 30 and July 31, 2026, depending on the delivery point.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339113
New
DIBBS
INTRODUCER KIT, CATH
Solicitation # SPE2DS-26-T-284W
The contract specifies the procurement of an Introducer Sheath Kit designed for use with an ER-REBOA catheter, containing a 7FR sheath with a .035 inch short guidewire, an 18G needle, a 30cc syringe, 50ml of 0.9 percent saline, a 5FR clamp, a number 11 stainless steel scalpel, and a 2-0 nylon suture with reverse cutting, 30 inches in length. The kit is identified by NSN 6515-01-663-2913 with a quantity of 2 KT, and a purchase request number of 7017663257, requiring delivery within five days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue or award date depending on acquisition size. Packaging must meet DLA standards, and all supplies must be free of government identification if not accepted. Bidders must clearly state the source and part number being offered. The solicitation number is SPE2DS-26-T-284W, posted on July 29, 2026, with responses due by August 4, 2026, under NAICS code 339113 for medical equipment manufacturing, administered by the Department of Defense through the Medical Supply Chain MD Surg FSF, with performance required in Williamsburg, Virginia, 23185-5830.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

Same awarding agency

NAICS: 488510
New
DIBBS
Defense Logistics and Transportation Coordination (U.S.-Flag Vessel Compliance)This contract requires the coordination of transportation for defense supplies with strict adherence to DFARS 252.247-7023, mandating the use of U.S.-flag vessels for ocean freight wherever applicable to ensure compliance with federal maritime regulations. All logistics activities must support the Department of Defense’s medical supply chain objectives, focusing on secure, timely, and regulated movement of critical defense materiel. The performance location is designated as FPO with ZIP code 96662, indicating operations may involve overseas or maritime transit routes governed by U.S. flag requirements. The solicitation, issued under NAICS code 488510 for support activities for transportation, is structured as a subcontract with a response deadline of August 4, 2026, and was posted on July 29, 2026, indicating a narrow window for proposers to submit compliant bids.
Freight Transportation Arrangement

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Handling and SDS Compliance ProviderThe contract requires the provision of Safety Data Sheets (SDS) for hazardous components within the NSN item, ensuring full compliance with OSHA’s Hazard Communication Standard. This includes the accurate application of hazard labels that meet federal requirements, enabling safe handling, storage, and disposal of dangerous materials throughout the supply chain. All deliverables must align with current HazCom regulations to support military medical supply operations, with performance centered at FPO, ZIP 96662. The work falls under NAICS code 541620 and is structured as a subcontract under the Department of Defense’s Medical Supply Chain FSH, with responses due by August 4, 2026. Contractors must demonstrate expertise in hazardous materials documentation and labeling to maintain regulatory compliance and operational readiness.
Environmental Consulting Services

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 385990
New
DIBBS
Military Packaging and Labeling Compliance ServiceThe contract requires compliance with MIL-STD-129 standards for the packaging, labeling, and palletization of serialized military containers, ensuring full adherence to Department of Defense logistical and identification protocols. The work involves securing, marking, and arranging military shipments in a manner that supports traceability, inventory accuracy, and handling efficiency throughout the supply chain, with all labeling and packaging elements meeting strict government specifications for barcodes, data matrix codes, and container identification. This subcontract is issued under NAICS code 385990 and is associated with the Medical Supply Chain FSH under the Department of Defense. Performance is to be executed at FPO with a ZIP code of 96662, and responses must be submitted by August 4, 2026. The solicitation is open for qualified vendors capable of delivering end-to-end packaging and labeling services compliant with military serialization requirements, with an emphasis on accuracy, timeliness, and regulatory alignment across all stages of container preparation for shipment.

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
Defense Medical Equipment Supplier – NSN 6630121893126The contract seeks the supply and delivery of NSN 6630121893126 under strict military standards for packaging and labeling, ensuring full compliance with all applicable Department of Defense protocols. Delivery must be made FOB destination, meaning the supplier assumes responsibility for the item until it reaches the specified delivery point in FPO with zip code 96662. The item falls under NAICS code 339112, indicating it pertains to surgical and medical instrument manufacturing, and is issued as a subcontract through the Medical Supply Chain FSH under the Department of Defense. All responses are due by August 4, 2026, with the solicitation posted on July 29, 2026, and further details available via the provided DIBBS link.
Surgical and Medical Instrument Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 333998
New
DIBBS
BEAKER, LABORATORY
Solicitation # SPE2DH-26-T-5611
The contract specifies the procurement of 107 laboratory beakers made of polypropylene with a capacity of 600 mL, identified by NSN 6640-00-889-1834, under solicitation SPE2DH-26-T-5611. All items must comply with Specification A-A-51326 dated 23 January 1986 and adhere to technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date or award date depending on the acquisition size. Packaging must meet commercial standards as defined in the procurement document, with each unit securely sealed in a container that prevents damage or breakage, and all shipments packed in commercial exterior containers suitable for safe transport via common carrier at the lowest possible cost to the delivery point in New Cumberland, PA, 17070-5002. Labeling must follow Medical Marking Standard No. 1, which supersedes MIL-STD-129, and copies of this standard can be obtained through DLA Troop Support. The contract also includes provisions for covered defense information, DLA packaging requirements, and the removal of government identification from non-accepted supplies. The response deadline is August 5, 2026, with a delivery requirement of 29 days after award, and the point of contact is Tina Vu of the Department of Defense Medical Supply Chain FSH.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334519
New
DIBBS
BLOOD COLLECTING UNIT
Solicitation # SPE2DH-26-T-5617
The Blood Collecting Unit is a medical device featuring a 7-inch tubing with a Luer adapter and a 21-gauge needle measuring 0.75 inches, equipped with a manually activated safety shield that fully covers the needle upon use to enhance user safety. Each unit is packaged in quantities of 200 per PG, with the unit of issue defined as one PG equaling 200 individual units. This item is subject to stringent technical and quality requirements as outlined in the DLA Master List of Technical and Quality Requirements, and it is classified as a TYPE I (CODE Q) item with a non-extendable shelf life of 36 months, requiring that no more than five months have elapsed from the date of manufacture to the date of delivery to the government. All packaging must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and must include clear markings for the date of manufacture, expiration or retest date, and the contract or lot number in accordance with the latest revision of MMS1C. Packaging must be commercial-grade, sealed to prevent damage, and arranged in exterior shipping containers suitable for safe transport via common carrier at the lowest possible rate to the designated delivery point at Fort Bliss, Texas. The item is governed by the procurement document SPE2DH-26-T-5617, and bidders must provide the source and part number being supplied, in addition to adhering to all applicable DLA packaging and labeling directives, including the removal of government identification from non-accepted supplies and the safeguarding of covered defense information. The solicitation was posted on July 29, 2026, with a response deadline of August 5, 2026, and a required delivery timeframe of 20 days after award.
Other Measuring and Controlling Device Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334516
New
DIBBS
MEASURING TUBE, GAS
Solicitation # SPE2DH-26-T-5587
The measuring tube for gas analyzer is designed to measure carbon dioxide content in compressed gases with a range of 100 to 3000 parts per million for one liter of air. It is a glass tube with rounded, melted tips and is sold in packages of ten, identified under unit of issue PG. This item is governed by the DLA Master List of Technical and Quality Requirements and is subject to specific packaging standards as outlined in DLA Packaging Requirements, with all packaging required to comply with Medical Marking Standard No. 1, replacing MIL-STD-129. Each unit must be securely sealed in a commercial container to prevent breakage and shipped in appropriate exterior containers to ensure safe delivery at the lowest carrier rate to the designated delivery point. The item has a non-extendable shelf life of 24 months, with no more than three months allowed to have elapsed from the date of manufacture to the date of government delivery. Labeling must include the date of manufacture, expiration or retest date, contract number, and lot number in accordance with the latest revision of MMS1C. This item is classified as a TYPE I (CODE M) shelf-life item under SPE2DH-26-T-5587, and it is subject to requirements for the removal of government identification from non-accepted supplies and potential classification as covered defense information. The National Stock Number is 6630-12-189-3126, with one package required under purchase request 7017017029, and delivery must be completed within 20 days ADO. The solicitation was issued by the Department of Defense’s Medical Supply Chain FSH with a response deadline of August 4, 2026, and additional details are accessible via the provided DIBBS link.
Analytical Laboratory Instrument Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 423450
New
DIBBS
PROBE, SPARK PLUG, AUTOC
Solicitation # SPE2DH-26-T-5615
The contract specifies the procurement of a single spark plug probe, identified by NSN 6530-01-337-8671 and purchase part number 32510-49940, intended for use on autoclave model 3500 series equipment. The item is not regulated by the FDA and must be furnished in strict compliance with DLA packaging and marking standards, including Medical Marking Standard No. 1, which supersedes MIL-STD-129. All packaging must meet ASTM D3951 requirements, but DLA’s Master List of Technical and Quality Requirements takes precedence, including prohibitions against intentional addition or direct contact with mercury or mercury-containing compounds, except in specific exempted applications such as batteries, fluorescent lights, sensors, and reagents approved by NAVSEA, with portable devices requiring shockproof design and secondary containment. The unit of issue is each, with a contracted quantity of one, to be delivered FOB destination within five days, with zero tolerance for quantity variance. Delivery is required to the USS RICHARD M MCCOOL JR LPD-29 in Pascagoula, Mississippi, and shipment must utilize the fastest traceable means, explicitly prohibiting parcel post. The supplier, GETINGE USA INC, must adhere to all DLA procurement directives, and the item must be labeled and palletized according to RP001 and applicable technical standards. The solicitation was issued under SPE2DH-26-T-5615 with a response deadline of August 5, 2026, and the original delivery requirement is set for July 31, 2026.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
MASK, FACE, ASEPTIC
Solicitation # SPE2DH-26-T-5608
The contract specifies the procurement of 6 packages of sterile face masks made from polypropylene in blue color, with each package containing 50 units, for a total of 300 masks. The item is identified by part number 113-3008, manufactured by Patterson Dental Company with CAGE code 2V418, and carries the NSN 6532-01-346-0190. All packaging must comply with commercial standards as outlined in the procurement document, ensuring each unit is sealed in a protective container and packed in suitable exterior shipping containers capable of safe transport via common carrier at the lowest cost to the designated delivery point, Fort Bragg, NC. The masks must meet a bacterial filtration efficiency exceeding 95 percent and are regulated by the FDA, requiring referral through EBS for confirmation. Marking must adhere to Medical Marking Standard No. 1, superseding MIL-STD-129, and packaging must follow MIL-STD-2073-1E. Delivery is required within 20 days FOB destination, with no tolerance for quantity variance, and inspection and acceptance occur at the delivery point. The solicitation number is SPE2DH-26-T-5608, with a response deadline of August 5, 2026, and the contracting office is under the Department of Defense’s Medical Supply Chain FSH.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 331313
New
DIBBS
TRAY, INSTRUMENT
Solicitation # SPE2DH-26-T-5607
The contract pertains to the procurement of a lightweight compact Mayo tray, identified by NSN 6530-01-618-7704, with a required quantity of five units. The item is designed for use with the Allevac Mayo stand and must comply with all technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with applicable revisions governed by the solicitation or award date depending on the acquisition size. Bidders are required to specify the source and part number being supplied. The solicitation, issued under SPE2DH-26-T-5607, was posted on July 29, 2026, with responses due by August 5, 2026. Delivery must be completed within 20 days of award, and the place of performance is designated as APO with zip code 09094-3219. The NAICS code is 331313, and the purchasing agency is the Medical Supply Chain FSH under the Department of Defense. Primary point of contact for inquiries is Tina Vu, reachable via email and phone provided. The contract type is a federal solicitation with no set-aside designation, and all supplies must adhere to DLA packaging requirements and the removal of government identification from non-accepted items.
Alumina Refining and Primary Aluminum Production

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details