Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Transducer Kit Hardware Supply

Active

Federal

Response Deadline11/09/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the procurement of ancillary hardware components to support prime contractors on DLA Troop Support supply contracts. The scope of work requires the sourcing and provision of 115 sets of fasteners, O-rings, gaskets, and connectors specifically for the Kit Air Transducer, identified by NSN 4930-01-535-7810. All supplied materials must strictly adhere to technical data package specifications and comply with the Buy American Act. Managed under NAICS code 332722 for the Department of Defense, the contract is issued by Construction & Equipment Manu & Con. Performance of the contract will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 9, 2026.

General Info

Procure 115 hardware sets for Kit Air Transducer by November 9, 2026.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE8EE-27-T-0363.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

KIT AIR TRANSDUCER

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 28

subcontract

Response DeadlineNov 9

Submission deadline

Response Deadline

11/09/2026, 05:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies ancillary hardware components for prime contractors on DLA Troop Support supply contracts. Sources and provides fasteners, O-rings, gaskets, and connectors required for the Kit Air Transducer (NSN 4930-01-535-7810). Ensures all materials meet Buy American Act requirements and technical data package specifications. Delivers 115 sets of kit hardware.

Similar Contracts

Same NAICS industry code

Supply of Round Plain Nuts (NSN 5310-00-839-1524)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, requires the supply of 84 round plain nuts identified by NSN 5310008391524. The hardware must strictly adhere to the DLA Master List of Technical and Quality Requirements and be delivered via FOB Origin to Cherry Point by April 3, 2028. To be eligible, contractors must provide a valid CAGE code and UEI, and they must certify that no covered defense telecommunications equipment is used in accordance with FAR 52.204-24. The opportunity falls under NAICS code 332722, with a response deadline of November 5, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 6 hours ago

DEADLINE

Supplier of Flat Washers (NSN 5310-01-097-9936)This subcontract involves the procurement of 109 specialized flat washers to support Defense Logistics Agency aircraft component projects. The supplier is responsible for manufacturing or sourcing the components in strict accordance with Sikorsky Aircraft Corporation part number SS5104-01 and NSN 5310-01-097-9936. All items must be delivered to DLA Distribution DDSP New Cumberland. The contract mandates rigorous adherence to quality and regulatory standards, including compliance with the Buy American Act and the Berry Amendment. Packaging must meet ASTM D3951 specifications, while marking and palletization must follow MIL-STD-129 and RP001 guidelines. The opportunity falls under NAICS code 332722 and is managed by the Department of Defense.

Defense Logistics Agency

POSTED

about 6 hours ago

DEADLINE

Close Tolerance Screw Manufacturing (NAS7802U3)This subcontract involves the manufacture of 116 close tolerance screws, part number NAS7802U3, for the DLA Weapons Support ASC Commodities Division. The fabrication process requires precision CNC machining in strict accordance with National Aerospace Standard 80205 and TDP Rev A Gen 1. Quality control must be maintained through sampling per MIL-STD-1916 or ASQ H1331, and the final products must adhere to Buy American requirements and MIL-STD-2073-1E packaging standards. The project is categorized under NAICS code 332722 and will be performed in New Cumberland. Interested parties should note the response deadline of November 5, 2026, for this Department of Defense requirement.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

Supply of Multiple Angle Sensor BracketsThis subcontract with the Department of Defense, specifically the DLA Weapons Support Land Supply Chain, involves the manufacture or procurement of Multiple Angle Sensor Brackets under NSN 5340016076959. The contractor is responsible for supplying 12 units of these specialized hardware brackets to prime contractors, with a strict delivery requirement of 5 days from the date of order. Performance for this contract is based in Anniston. Compliance with specific military and industry standards is mandatory, requiring all non-hazardous materials to be packaged according to ASTM D3951 and all shipments to be labeled per MIL-STD-129. The opportunity falls under NAICS code 332722 and was posted on October 28, 2026, with a response deadline of November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

Supply of Machine Screws (NSN 5305-01-406-9165)This subcontract, managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, involves the procurement and delivery of machine screws identified by NSN 5305-01-406-9165. The contractor is responsible for supplying these fasteners to prime contractors for various defense projects, with physical delivery to designated government locations, including Cherry Point. Logistics for the delivery of these parts are handled through the First Destination Transportation program. Strict manufacturing and sourcing compliance is required for this contract. All parts must be produced without the use of additive manufacturing processes and must adhere to the domestic material restrictions set forth by the Berry Amendment and the Buy American Act. The opportunity is categorized under NAICS code 332722, with a response deadline of November 5, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

Supplier of Self-Locking Plate Nuts (NSN 5310-01-669-4613)This subcontract involves the supply of 155 self-locking plate nuts, identified by NSN 5310-01-669-4613, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The supplier is responsible for manufacturing or sourcing components that strictly adhere to Boeing part number BACN10TL3A6 and DLA Master List requirements. Performance will take place at Tinker AFB, with all units required to be packaged according to MIL-STD-2073-1E and MIL-STD-129 standards. To ensure quality and security, the contractor must maintain ISO 9001:2015 certification and demonstrate compliance with NIST SP 800-171. All delivered hardware must undergo sampling and inspection in accordance with MIL-STD-1916 or ASQ H1331. The solicitation was posted on October 28, 2026, with a response deadline of November 5, 2026, under NAICS code 332722.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

Supply of Spring Pins (NSN 5315-01-599-0440)This subcontract involves the sourcing or fabrication of two spring pins under NSN 5315-01-599-0440 for prime contractors delivering to the Defense Logistics Agency Weapons Support LSO Combat Vehicles and Armament. The selected provider must ensure all components adhere to the DLA Master List of Technical and Quality Requirements and maintain domestic origin. Additive manufacturing processes are strictly prohibited unless specific authorization is granted. The project falls under NAICS code 332722 and will be performed at Camp Pendleton, California. Interested parties must respond by November 9, 2026, to fulfill the requirements of the Department of Defense.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 6 hours ago

DEADLINE

Wiring Harness Manufacturing and IntegrationThis subcontract opportunity with the Department of Defense, specifically the DLA Weapons Support ASC, involves the manufacturing and integration of wiring harness bracket assemblies for prime contractors. The scope of work includes cutting, stripping, crimping, and routing military-grade wiring in accordance with TDP Rev C Gen 3, as well as performing continuity testing for First Article Testing. Eligible bidders must be small businesses and maintain strict certifications, including ISO 9001:2015, ITAR/EAR compliance, US/Canada Joint Certification, and CMMC Level 2. The solicitation was posted on October 28, 2026, with a response deadline of November 6, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

Flat Washer Supplier (NSN 5310009501403)This subcontract involves the procurement of 9,090 flat washers to support the DLA Weapons Support Nuclear Reactor Program for the Department of Defense. The hardware must be manufactured or sourced in strict accordance with NSN 5310009501403, NASM15795 Revision 3, and FF-W-92C(3) Revision C. All materials provided must be mercury-free, and the supplier is required to maintain compliance with DFARS 252.204-7012. Quality control must be performed according to MIL-STD-1916 or MIL-STD-105/ASQ Z1.4, with packaging and labeling adhering to MIL-STD-2073-1E and MIL-STD-129. The place of performance is designated as Tinker AFB. Interested parties must respond by November 9, 2026, under NAICS code 332722.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 6 hours ago

DEADLINE

Supply of Blind Rivets (NSN 5320-01-032-8075)This subcontract involves the supply of blind rivets specifically meeting NSN 5320-01-032-8075 specifications to support prime contractors for the Defense Logistics Agency Weapons Support ASC Commodities Division. The selected provider is responsible for the manufacture or procurement of the rivets, as well as performing all necessary quality assurance and packaging to ensure the items are ready for shipment to designated destination acceptance points. The contract falls under NAICS code 332722 and requires the physical delivery of the rivets by the specified delivery date. Interested parties should note that the response deadline for this opportunity is November 5, 2026.

Defense Logistics Agency

POSTED

about 6 hours ago

DEADLINE

Precision Manufacturing of Plain Studs (NAS184)This subcontract involves the precision manufacturing of 103 plain studs for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The production must adhere to NAS184 (S 2022) and drawing 13873 EI-010071708, utilizing precision CNC machining to ensure thread gaging for Class 3A and 3B threads in accordance with SAE AS8879 or MIL-S-7742. The final deliverables consist of 103 units under NSN 5307-01-007-1708. Strict quality and regulatory standards are required for this project, including the provision of a Certificate of Quality Compliance and full adherence to DFARS 252.204-7012. The work is categorized under NAICS code 332722 and is to be performed in New Cumberland. The response deadline for this opportunity is November 5, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

Blind Rivet Supply (NSN 5320-01-588-2172)This subcontract involves the supply of 50 blind rivets to prime contractors supporting the DLA Weapons Support ASC Commodities Division. The rivets must be manufactured or sourced according to NSN 5320-01-588-2172 specifications, with a strict prohibition on additive manufacturing. All items must be delivered FOB Origin and comply with Berry Amendment domestic sourcing requirements. The contractor is responsible for quality inspections using SAE AS9003 or ISO 9001 compliant systems. Packaging and marking must adhere to MIL-STD-2073-1E, RP001, and MIL-STD-129 standards. The performance of the contract is centered in New Cumberland, Pennsylvania, under NAICS code 332722.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

Same awarding agency

Supply of Vehicle Cargo Tie-Downs (NSN 3990016198011)This subcontract involves the supply of 109 vehicle cargo tie-downs for prime contractors working on Department of Defense projects through DLA Troop Support. The contractor is responsible for manufacturing or sourcing units that strictly adhere to NSN 3990016198011 and the DLA Master List of Technical and Quality Requirements. All materials must be compliant with the Berry Amendment and the Buy American Act. Operational requirements include specific packaging and marking standards per MIL-STD-129 and ASTM D3951, with palletization following RP001 guidelines. The performance of this contract is centered in New Cumberland, Pennsylvania, under NAICS code 339999. Responses for this requirement are due by November 9, 2026.

All Other Miscellaneous Manufacturing

POSTED

about 6 hours ago

DEADLINE

Supplier of Fibrous Nylon RopeThis subcontract involves the manufacture and supply of 7,000 reels of natural-colored fibrous nylon rope, identified by NSN 4020001069406, for prime contractors supporting Department of Defense supply contracts. The rope must feature a 3-3/4 inch circumference and be provided in 200-yard reels with a net weight of 239 pounds and a nominal continuous length of 600 feet. All products must strictly adhere to MIL-STD-129 and MIL-STD-2073-1E standards for marking and packaging. The project is managed under NAICS code 314994 and will be performed in San Diego, California. Interested parties must respond by November 9, 2026, following the solicitation posted on October 28, 2026.

Rope, Cordage, Twine, Tire Cord, and Tire Fabric Mills

POSTED

about 6 hours ago

DEADLINE

Supply of Hydraulic Tripod Jacks (NSN 1730-00-201-4849)This subcontract involves the sourcing or fabrication and delivery of Hydraulic Tripod Jacks meeting NSN 1730-00-201-4849 specifications for prime contractors supporting Department of Defense supply contracts. The selected provider must ensure all hardware adheres to the DLA Master List of Technical and Quality Requirements, with packaging and marking strictly following ASTM D3951 and MIL-STD-129 standards. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 333998. Interested parties must submit their responses by November 6, 2026, for performance located in zip code 17070-5002.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 6 hours ago

DEADLINE

Supplier of Paving Breaker Spades (NSN 3820-01-242-1210)This subcontract involves the supply of 15 Paving Breaker Spades to support prime contractors fulfilling DLA Troop Support supply contracts. The required hardware must meet NSN 3820-01-242-1210 specifications, specifically identifying Stanley Black & Decker part number 09262 or Daimler Truck North America LLC part number 09262M. All units must adhere to Critical Application Item quality standards and comply with DLA supply chain requirements. Managed under the Department of Defense by Construction & Equipment Manu & Con, the contract falls under NAICS code 423830. The place of performance is located in Tracy, California. Interested parties must respond by the deadline of November 9, 2026, following the posting date of October 28, 2026.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 6 hours ago

DEADLINE

Military-Grade Packaging and Logistics ServicesThis subcontract for Military-Grade Packaging and Logistics Services involves providing specialized packaging and palletization for prime contractors supporting DLA Troop Support aerospace hardware projects. The scope of work requires packaging items according to ASTM D3951 standards, marking and labeling in compliance with MIL-STD-129, and palletizing shipments per RP001 guidelines. The final deliverable consists of 14 units prepared for transport to DLA Distribution. Managed under the Department of Defense and categorized under NAICS code 488510, the work will be performed in New Cumberland. The solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026.

Freight Transportation Arrangement

POSTED

about 6 hours ago

DEADLINE

Precision Machining and Fabrication of Ground Adapter FittingsThis subcontract involves the precision machining and fabrication of 14 Ground Adapter Fittings, identified by NSN 1730-01-290-3964, for prime contractors supporting DLA Troop Support procurement projects. All work must be performed according to the provided technical data package, with a strict prohibition against the use of additive manufacturing. The project is managed under the Department of Defense and falls under NAICS code 332710, with performance located in New Cumberland. To ensure the security of export-controlled technical data, the contractor must maintain CMMC Level 2 certification and full ITAR and EAR compliance. All finished fittings must meet rigorous DLA technical specifications. Interested parties must respond by November 9, 2026.

POSTED

about 6 hours ago

DEADLINE

Manufacture and Supply of Shaft Sleeves (NSN 3950-01-137-0937)This subcontract involves the manufacture and supply of 32 precision-machined shaft sleeves, identified by NSN 3950-01-137-0937, for Garner-Denver hoist models. The components are produced for prime contractors supporting DLA Troop Support contracts under NAICS code 332710. Performance will take place in New Cumberland, Pennsylvania, with the final delivery of all units handled as FOB Origin. The contractor must adhere to strict military standards for packaging and marking, specifically MIL-STD-2073-1E and MIL-STD-129. Additionally, the agreement requires full compliance with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 regulations to ensure all legal and security requirements for Department of Defense procurement are met.

POSTED

about 6 hours ago

DEADLINE

Precision Component Manufacturer for Jack KitsThis subcontract involves the precision manufacture of individual components, including seals, valves, pins, and housings, specifically for NSN 1730-01-206-1707. The selected manufacturer will utilize CNC machining, casting, or molding to produce parts that adhere to Critical Application Item standards and Columbus Jack Corp P/N 1589 technical data. All finished components must be delivered to a prime integrator along with required certificates of conformance to support DLA Troop Support supply contracts. Managed under NAICS code 332710 for the Department of Defense, the work is to be performed in New Cumberland. The solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026.

POSTED

about 6 hours ago

DEADLINE

Supplier of Jack Parts Kits (NSN 1730-01-206-1707)This subcontract involves the procurement and manufacture of complete Jack Parts Kits for prime contractors supporting DLA Troop Support supply contracts. The supplier is responsible for providing components for NSN 1730-01-206-1707, ensuring full compatibility with Columbus Jack Corporation P/N 1589. The scope of work includes the kitting, assembly, and packaging of two completed kits in strict accordance with MIL-STD-2073-1E and MIL-STD-129 standards. The contract is issued by the Department of Defense under NAICS code 332999, with performance taking place in New Cumberland. Compliance with the Buy American Act and DFARS 252.204-7012 is mandatory. Interested parties must submit their responses by November 9, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 6 hours ago

DEADLINE

MIL-SPEC Packaging and Logistics ServicesThis subcontract for MIL-SPEC Packaging and Logistics Services involves providing specialized military packaging, marking, and palletization for prime contractors supporting Department of Defense supply contracts. The scope of work requires strict adherence to ASTM D3951 for packaging, MIL-STD-129 for marking and labeling, and RP001 for palletization. The primary objective is the preparation and delivery of 119 packaged and palletized units to the DLA Distribution DDSP New Cumberland Facility for final destination acceptance. The project is categorized under NAICS code 561910 and is managed through the Department of Defense. Performance will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 9, 2026, for this specific logistics requirement.

Packaging and Labeling Services

POSTED

about 6 hours ago

DEADLINE

Specialized Component Supply for Retractor AssemblyThis subcontract involves the supply of precision machined components, springs, or fasteners for prime contractors supporting Department of Defense DLA supply contracts. The scope of work specifically requires the manufacture of individual piece numbers for part number 556AS164-3, adhering to the specifications outlined in TDP Rev A Gen 1. Deliverables include either individual machined parts or complete hardware kits, with a strict requirement for material certifications and mill test reports for all metals used. The contract is managed under NAICS code 332710 and mandates full compliance with the Buy American Act. Performance will take place in New Cumberland, Pennsylvania. Interested parties must note the response deadline of November 9, 2026, for this specialized component supply effort related to retractor assemblies.

POSTED

about 6 hours ago

DEADLINE

Precision Manufacturing of Retractor AssembliesThis subcontract involves the precision manufacturing and assembly of 119 Retractor Assemblies and Weapon Cradle Adapters for prime contractors under Department of Defense DLA supply contracts. The work requires strict adherence to Basic Drawing NR 30003 556AS164 Revision H and TDP Rev A Gen 1, utilizing precision CNC machining and specialized assembly jigs. Performance will take place in New Cumberland, Pennsylvania. To be eligible, the contractor must be an OEM-approved source or successfully obtain OEM approval. Additionally, the provider must maintain rigorous cybersecurity standards, ensuring full compliance with CMMC Level 2 and NIST SP 800-171. Responses for this requirement are due by November 9, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Supply of Hi-Shear Pin-Rivets (NSN 5320-01-591-2999)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

Precision Manufacturing of Screw Thread Inserts (NSN 5325009301619)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

Supply of Aerospace Pin-Rivets (P/N BACB30NX8K3)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

Supply of Access Covers (NSN 5340-01-570-5246)

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

Supplier of Flat Washers (NSN 5310-01-617-4099)

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 6 hours ago

DEADLINE

Manufacture of Loop Clamps (SAE AS21919D)

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 6 hours ago

DEADLINE

Manufacture and Supply of Close Tolerance Screws (BACS12JC3AU3)

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 6 hours ago

DEADLINE

Specialized Fasteners and Hardware Supply

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 6 hours ago

DEADLINE

Manufacture and Supply of Machine Screws (NSN 5305014631012)

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 6 hours ago

DEADLINE

Supply of Fastener Receptacles (NSN 5325015443012)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

Supply of Self-Locking Hexagon Nuts with Extended Washers

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

Supply of Sleeve Bushings

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS