Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

TRANSDUCER, MOTIONAL

Awarded
SPE4A5-26-T-1272Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Defense Logistics Agency awarded Contract SPE4A526P1475 to ATEC INC (CAGE 09552) on July 17, 2026, for the procurement of a single line item: a motional transducer identified by NSN 6695015594406 and PR 7014215170, with a total contract value of $111,578.56. The award stems from Solicitation SPE4A5-26-T-1272, and performance is to occur at the contractor’s facility in Stafford, TX. The contract was issued as a modification (P00001) effective November 25, 2025, using Standard Form 30 (Rev. 11/2016), with administrative oversight handled by DLA Aviation in Richmond, VA. Payment remittance is directed to DLA Aviation at 6090 Strathmore Road, Richmond, VA 23237, and the Contracting Officer is Dean Allen, reachable via CARL.ALLEN@DLA.MIL, though no COTR or COR is identified. The contract does not include details on quantity, delivery schedule, FOB terms, packaging specifications, inspection criteria, or acceptance protocols beyond the general requirement for compliance with applicable federal regulations. A defining characteristic of this contract is the mandatory inclusion of FAR 52.222-90, Addressing DEI Discrimination by Federal Contractors, incorporated via DoD Class Deviation 2026-00040, Revision 1, effective April 2026. This clause prohibits the contractor and its subcontractors from engaging in racially discriminatory diversity, equity, and inclusion practices in employment, contracting, or program participation, and requires the contractor to flow down these terms to all subcontracts performed within the United States. The contractor must report any known or reasonably knowable violations by subcontractors, notify the Contracting Officer if any legal challenge is initiated against the clause, and provide all records and reports requested for compliance verification. Noncompliance may result in contract termination, suspension, or debarment, and compliance is deemed material to payment under 31 U.S.C. 3729(b)(4). The clause is supported by Executive Orders 14275, 14265

General Info

ATEC INC awarded $111,578.56 for motion transducer NSN 6695015594406 under DLA contract SPE4A5-26-T-1272.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

Contract Value

$111,578.56

NAICS

334419 - Other Electronic Component ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Awardee

ATEC INCView Profile

Award Issued Date

Documents

(1)

SPE4A526P1475_P00001.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseAwarded
Posted

Combined Synopsis

Awarded

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Defense Logistics Agency
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → Defense Logistics Agency
View Agency Profile
Office AddressUS

Full Description

Show more
DLA award SPE4A526P1475 posted on DIBBS. Awardee: ATEC INC (CAGE 09552) Total Contract Price: $111,578.56 Award Date: 07-17-2026 Solicitation: SPE4A5-26-T-1272 Line items: - TRANSDUCER, MOTIONAL (NSN/Part 6695015594406, PR 7014215170)

Similar Contracts

Same NAICS industry code

NAICS: 334419
New
DIBBS
WIRING HARNESS, BRAN
Solicitation # SPE4A6-26-T-12UF
The contract pertains to the procurement of a single unit of a branched wiring harness identified by NSN 6150-00-394-4934 under solicitation SPE4A6-26-T-12UF, with a delivery requirement of 58 days after order. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, with applicable revisions determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA packaging standards, and any non-accepted supplies must have government identification removed. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, with attributes classified as critical, major, or minor corresponding to specific verification levels or AQLs. All technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons regardless of location, and requires prior authorization from the Department of State or Commerce. Only DLA contractors with approved US/Canada Joint Certification Program status, completed export control training, and DLA authorization may access such data. The contract is issued by the Department of Defense’s ASC Commodities Division with performance at New Cumberland, Pennsylvania, and all inquiries should be directed to the primary point of contact, Alliyah Richmond.
ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
WIRING HARNESS
Solicitation # SPE4A6-26-T-12SP
The contract is for the procurement of four wiring harnesses identified by NSN 6150-01-494-3534, with a delivery requirement of 170 days after order issuance. The solicitation number is SPE4A6-26-T-12SP, posted on August 5, 2026, with responses due by August 13, 2026. The item falls under NAICS code 334419 and is managed by the ASC Commodities Division of the Department of Defense. The place of performance is specified as Barstow, California, with Alliyah Richmond listed as the primary point of contact. The contract mandates compliance with CMMC Level 2 requirements as certified by a Third-Party Assessment Organization and permits the use of Certificate of Conformance procedures unless explicitly withheld by a Quality Assurance Letter of Instruction. The technical data associated with this wiring harness is subject to U.S. export control regulations under ITAR or EAR, prohibiting any disclosure or transfer to foreign persons regardless of location, including foreign national employees and subsidiaries. DFARS 252.225-7048 governs the handling of this data, and distribution is restricted to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have been formally approved by DLA to access controlled data. All handling, storage, and transmission of technical documentation must adhere strictly to these restrictions to prevent unauthorized export or disclosure.
ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
WIRING HARNESS, BRANCHE
Solicitation # SPE7L1-26-T-917E
The contract is for a single unit of a branched wiring harness identified by NSN 6150-01-586-5212 and part number 3754508, issued under solicitation SPE7L1-26-T-917E to OSHKOSH DEFENSE LLC. Delivery is required within 10 days FOB origin to Fort Sill, Oklahoma, with no variance permitted in quantity. The item must be packaged in compliance with ASTM D3951 and labeled per MIL-STD-129, with palletization meeting DLA’s packaging requirements, and all packaging must adhere to the DLA Master List of Technical and Quality Requirements, which take precedence over any other standard. Sampling for quality assurance must follow MIL-STD-1916 or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and acceptance requires zero non-conformances unless otherwise specified. The contractor must comply with Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment requirements and is subject to Covered Defense Information protocols under RD002. Item Unique Identification is not required per customer request. Shipment must be sent by the fastest traceable means, excluding parcel post, to the specified delivery address with the RDD 555 designation, and all markings must include the referenced mail forward and vendor details. The original required delivery date is August 3, 2026.
LAND SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE4A6-26-T-12SF
The contract is for a special-purpose electrical cable assembly, identified by NSN 5995015922049 and part number NF24Q100, with a total quantity of 8,881 feet to be delivered within 170 days FOB origin. The unit of issue has been changed to feet effective May 1, 2015, with a 1:12 conversion ratio, and delivery must comply with MIL-STD-2073-1E packaging standards, including specific preservation methods, materials, and marking per MIL-STD-129 without special markings. The contract allows for a 10% variance in quantity and requires inspection and acceptance at the destination. Packaging must also adhere to DLA’s procurement requirements, including palletization guidelines, and all supplies must be physically identified per RQ017. Sampling for quality verification must follow MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels of VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; acceptance requires zero non-conformances unless otherwise specified. The cable assembly is designated a critical application item, and cybersecurity compliance is mandated through CMMC Level 2 self-assessment. The solicitation is a total small business set-aside under NAICS code 334419, issued by the Department of Defense’s ASC Commodities Division, with performance at Tinker AFB and point of contact Berkeley Vaughan. Technical and quality requirements are governed by the DLA Master List, and the contract is subject to covered defense information provisions as well as restrictions on removal of government identification from non-accepted supplies.
ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
SHIELDING GASKET, EL
Solicitation # SPE7M5-26-T-368H
The contract is for the procurement of 16 units of SHIELDING GASKET, EL under solicitation SPE7M5-26-T-368H, with a total value of $256.00 at $16.00 per unit. Delivery is required within 20 days after award to the Puget Sound Naval Shipyard in Bremerton, WA, with FOB origin terms and no variance allowed in quantity. All items must be packaged in strict compliance with MIL-STD-2073-1E, employing preservation method 31 for dry storage, and marked according to MIL-STD-129 with no special marking identifiers. The National Stock Number is 5999-01-686-1234, and shipments must be sent via the fastest traceable means, explicitly excluding parcel post. The contract mandates electronic invoicing through WAWF and requires the supplier to provide a Unique Entity ID and CAGE code. Special requirements include adherence to hazard communication standards under DFARS 252.223-7001, where any hazardous materials must be identified and labeled prior to award. The contract includes numerous FAR and DFARS clauses covering equal opportunity, human trafficking prevention, employment eligibility verification, sustainable products, cybersecurity safeguards such as NIST SP 800-171 and safeguarding covered defense information, whistleblower protections, and restrictions on covered telecommunications equipment. All offers must be submitted electronically via the DLA Internet Bid Board System by August 17, 2026, and the sole point of contact for solicitation inquiries is Margaret Smith of the Defense Logistics Agency’s Active Devices Division. The acquisition is governed by DLA’s Packaging Requirements for Procurement (RP001) and technical/quality requirements from the DLA Master List, with inspection and acceptance conducted at destination. No options or extensions are available, and the basis of award is not explicitly stated but inferred to be price-based.
ACTIVE DEVICES DIVISION

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334419
New
DIBBS
CONTACT, ELECTRICAL
Solicitation # SPE7M0-26-T-031N
This contract is for the procurement of one electrical contact component, identified by part number 3RT2036-1AN20 and NSN 5999017312005, manufactured by SIEMENS INDUSTRY, INC. The requirement is issued under solicitation SPE7M0-26-T-031N with a firm delivery deadline of five days after award and delivery must be FOB origin. The quantity is fixed at one unit with no tolerance for variance. Packaging and marking must strictly follow MIL-STD-2073-1E and MIL-STD-129 standards, with packaging codes and methods specified including preservative method 41, dry packaging, and D3 unit container with E5 intermediate container. The item must be palletized according to DLA packaging requirements and shipped via traceable freight methods—parcel post is prohibited. The delivery and freight address is Fort Stewart, Georgia, with the same recipient for mark for instructions. A technical and quality compliance requirement is incorporated by reference from the DLA Master List, and all supplies must comply with government identification removal protocols and physical marking standards. The contract includes government-only administrative codes and indicates an original required delivery date of June 10, 2026, though no ship date is specified. The solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026, under a federal procurement framework managed by the Department of Defense and the Maritime Supply Chain ESOC.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, POWER, E
Solicitation # SPE4A6-26-T-12SQ
The contract is for the procurement of a branched power electrical cable assembly, identified by NSN 6150200018627 and part number CA315025-01, with a mandatory quantity of eight units. Delivery is required within 170 days from contract award, with FOB origin terms, and no variance in quantity is permitted. Inspection and acceptance both occur at the manufacturer’s origin, governed by strict quality standards including MIL-STD-1916 or ASQ Z1.4 sampling methods with zero non-conformances required unless otherwise directed. Attributes are classified with verification levels VII, IV, and II for critical, major, and minor items respectively, or corresponding AQLs of 0.1, 1.0, and 4.0. All items must be marked per MIL-STD-129 with no special marking required, and packaged in strict compliance with MIL-STD-2073-1E and DLA packaging requirements. The product is designated as a critical application item. Documentation and technical requirements referenced are drawn from the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition size. Packaging and labeling must include appropriate government identification until acceptance, and any rejected items must have government markings removed prior to return. The delivery point is the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation details governed by DLAD procedural notes C19 and C20, and the original required delivery date is May 21, 2027.
ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE4A6-26-T-12SS
This contract is for the procurement of five special-purpose electrical cable assemblies identified by NSN 6150015065250 and manufacturer part number 00805 from TRU-HITCH, INC. The items must be delivered in full compliance with strict military packaging standards, specifically MIL-STD-2073-1E and DLA packaging requirements, and marked in accordance with MIL-STD-129 without special markings. Delivery is FOB origin with zero tolerance for quantity variance and inspection and acceptance occurring at the destination warehouse in Tracy, California. The required delivery date is 170 days after award, with a need ship date of January 31, 2027 and original delivery deadline of February 24, 2027. Quality assurance follows zero-defect sampling protocols under MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The contract incorporates technical and quality requirements referenced from the DLA Master List and mandates CMMC Level 2 self-assessment for cybersecurity compliance. All supplies must be physically identified per RQ017, and government identification must be removed from non-accepted items. The unit price is $5.00 per item for a total contract value of $25.00, and transportation details align with DLA procedural notes C19 and C20.
ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

NAICS: 541620
New
DIBBS
Environmental Compliance and MonitoringThe contract pertains to environmental compliance and monitoring activities focused on stormwater management, erosion control, and regulatory adherence during construction operations at Cherry Point, North Carolina, with a ZIP code of 28533-0021. It is a subcontract under the Defense Logistics Agency, part of the Department of Defense, and falls under the NAICS code 541620, which designates environmental consulting services. The work involves continuous oversight to ensure that all construction activities meet federal, state, and local environmental regulations, particularly those related to water quality protection and soil stabilization. Monitoring will include routine inspections, documentation of best management practices, reporting of non-compliance issues, and coordination with regulatory authorities as needed. The solicitation was posted on August 5, 2026, and responses are due by August 13, 2026, indicating a tight timeline for qualified vendors to submit proposals. The contract does not specify any set-aside status or target demographics for participation, meaning it is open to all eligible subcontractors. Performance is localized to the Cherry Point area, requiring on-site presence and familiarity with regional environmental conditions and regulatory frameworks. The contractor must be prepared to implement and maintain an effective environmental management plan throughout the construction lifecycle, with an emphasis on preventing pollution incidents and ensuring timely compliance reporting to avoid penalties or work stoppages.
Environmental Consulting Services

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details