Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

TRANSDUCER, MOTIONAL PI

Active
SPE4A6-26-T-18LHFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of 46 units of a motional pickup transducer, identified as a Commercial Off the Shelf item from Kulite Semiconductor Products Inc with part number ITQ-R36-1000-100SG and NSN 6695015368287. The solicitation is set aside for Service-Disabled Veteran-Owned Small Businesses and is managed by the ASC Commodities Division of the Department of Defense. Delivery is required within 171 days, with a need ship date of February 12, 2027, and an original required delivery date of July 31, 2027. The agreement specifies that items must be delivered FOB Origin and inspected and accepted at the destination, specifically DLA Distribution San Joaquin in Tracy, California. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization follows DLA packaging requirements. Quality assurance and sampling will be conducted according to MIL-STD-1916 or ASQ H1331, ensuring zero non-conformances in the sample lot unless otherwise specified.

General Info

DoD procurement of 46 Kulite transducers for SDVOSB delivery by July 31, 2027.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

334519 - Other Measuring and Controlling Device ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, USA

Set-Aside

SDVOSBC

Documents

(1)

Request for Quotations SPE4A6-26-T-18LH

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUSA
Contacts
Briana Covington
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
TRANSDUCER,MOTIONAL PICKUP
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
TRANSDUCER MOTION, PICKUP
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THIS ITEM IS IDENTIFIED AS A COMMERCIAL OFF THE SHELF (COTS) ITEM
KULITE SEMICONDUCTOR PRODUCTS INC 34345 P/N ITQ-R36-1000-100SG
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017914853 0001 EA 46.000
NSN/MATERIAL:6695015368287
DELIVERY (IN DAYS):0171
DELIVER FOB: ORIGIN
SPE4A6-26-T-18LH
SECTION B
PR: 7017914853 PRLI: 0001 CONT’D
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN RD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
25600 S CHRISMAN RD REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:02/12/2027 Original Required Delivery Date:07/31/2027
SPE4A6-26-T-18LH NSN/Part Number: 6695-01-536-8287 Quantity: 46 EA Purchase Request: 7017914853QTY: 46 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334519
New
DIBBS
TRANSMITTER, LIQUID
Solicitation # SPE4A6-26-T-18QF
This contract is for the procurement of one liquid quantity transmitter, identified by NSN 6680010875584 and Setra Systems part number 47539. The order is issued by the Department of Defense ASC Commodities Division for delivery to the Trident Refit Facility in Kings Bay, Georgia. Delivery is required within 20 days after receipt of the order, with a required delivery date of August 11, 2026. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging and marking standards per MIL-STD-129 and MIL-STD-2073-1E. Sampling must follow MIL-STD-1916 or ASQ H1331, and the contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds, except where functionally required. Shipping must be handled via the fastest traceable means, and parcel post is prohibited.
ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
THREADLOCKER ADHESI
Solicitation # SPE2DH-26-T-6060
This solicitation, issued by the Department of Defense Medical Supply Chain FSH, is for the procurement of two units of Loctite 222 threadlocker adhesive. The adhesive is required for the repair and maintenance of instruments within the Biological Agent Detection System (JBAIDS), identified by NSN 6665-01-523-5629. The specific item being requested is identified by NSN 6630-01-524-2547. The contract requires adherence to DLA packaging requirements and technical quality standards as specified in the DLA Master List. Bidders must provide the source and part number being supplied. The delivery timeline is set for 20 days after receipt of order. The solicitation number is SPE2DH-26-T-6060, with a response deadline of August 24, 2026.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 1 hour ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
GAGE, PRESSURE, DIAL IND
Solicitation # SPE4A5-26-T-368F
This contract is for the procurement of four dial indicating pressure gages, identified by NSN 6685-01-142-8149 and part number A812-100-7-NI. The order is issued by the Department of Defense through the ASC Supplier Oper OEM Division, with a required delivery date of January 25, 2027, and a delivery window of 170 days. The items are to be delivered FOB Origin to the DLA Distribution San Joaquin facility in Tracy, California. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards under RP001 and MIL-STD-129. Quality assurance is governed by tailored higher-level contract requirements for both manufacturers and non-manufacturers, with sampling methods following MIL-STD-1916 or ASQ H1331. The contract specifies a zero percent quantity variance and designates the inspection and acceptance points at the destination.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
Federal
6695--In-vivo and Ex-vivo System with Laptop
Solicitation # 36C25226Q0549_2
The Department of Veterans Affairs, through Network Contract Office 12, is soliciting bids for an in-vivo and ex-vivo research system that includes a laptop. This combined synopsis and solicitation is managed by Contract Specialist Brandon Harris and falls under NAICS code 334519. The procurement is based in Milwaukee, Wisconsin, with the actual place of performance located in Madison, Wisconsin. There are no specific set-aside restrictions for this opportunity. Interested parties must submit their responses by the deadline of August 24, 2026.
252-NETWORK Contract Office 12 (36C252)

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
Federal
Upgrade an Instru-Met electromechanical frame
Solicitation # 80NSSC26941776Q
The NASA Shared Services Center is seeking a sole source provider to upgrade an Instru-Met electromechanical frame under solicitation number 80NSSC26941776Q. This requirement is categorized under NAICS code 334519 and is managed by the National Aeronautics And Space Administration. The contract was posted on August 17, 2026, with a response deadline of August 19, 2026. While the contracting office is located in Stennis Space Center, Mississippi, the place of performance is specified as Cleveland, Ohio. Shanna Patterson serves as the primary point of contact for this special notice.
NASA Shared Services Center

POSTED

about 6 hours ago

DEADLINE

in 1 day
View Details
NAICS: 334519
New
Federal
High-Performance Quantum Scalar Magnetometers
Solicitation # FA700026Q0063
The U.S. Air Force is soliciting proposals for the development of high-performance quantum scalar magnetometers under a Total Small Business Set-Aside, designated for small businesses as defined by the Small Business Administration. This opportunity, identified by solicitation number FA700026Q0063 and NAICS code 334519, is aimed at advancing next-generation magnetic sensing technology with applications critical to defense and aerospace systems. Proposals must be submitted by July 13, 2026, and the contract will be performed at the U.S. Air Force Academy in Colorado, with technical oversight led by the Department of Defense’s Office of 10 Cons Lgc. The project requires innovation in quantum sensor design, precision calibration, and integration into operational environments, with a strong emphasis on performance, reliability, and scalability. Primary point of contact for technical inquiries is Ronald Wilson, reachable at ronald.wilson.26@us.af.mil, with secondary support provided by Wanda Farr at wanda.farr@us.af.mil. The solicitation is published as a special notice on SAM.gov and is exclusively open to small business concerns, reflecting a deliberate effort to foster innovation within the small business community. Respondents are expected to demonstrate technical capability, proven experience in quantum sensing or related fields, and a clear pathway to transitioning the developed magnetometers from laboratory prototypes to deployable systems. All submissions must fully comply with federal acquisition regulations and include detailed technical solutions, project schedules, and cost breakdowns aligned with the mission-critical needs of the Air Force.
FA7000 10 Cons Lgc

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
Federal
Mircrotek NDT-2000 Film Digitizing System
Solicitation # 80NSSC26941282Q
NASA/NSSC is seeking to acquire a Mircrotek NDT-2000 Film Digitizing System to be utilized at the Kennedy Space Center. The agency intends to award a sole source contract to NDT Supply.com under FAR 12.102(a), as they have been identified as the sole provider of this specific system. This procurement is classified under NAICS code 334519 and follows the procedures prescribed in FAR Part 12 for commercial items. Interested organizations must submit their capabilities and qualifications to the primary point of contact, Kacey Hickman, by 3:00 p.m. CST on August 19, 2026. These submissions will be used exclusively to determine if the procurement will be conducted on a competitive basis. Please note that only capability statements are being requested at this time, and formal quotes will not be evaluated by the technical team.
NASA Shared Services Center

POSTED

about 6 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334519
New
Federal
66--GENERATOR TIME CODE
Solicitation # SPRMM126RGF64
The Government is seeking information from potential suppliers regarding the procurement of a Generator Time Code (NSN 7GH-6645-015822663, P/N 001100X12) through a Sources Sought notice issued by DLA Maritime Mechanicsburg under solicitation number SPRMM126RGF64. This notice, published on June 20, 2026, with a response deadline of August 5, 2026, is not a request for proposals but a market survey to evaluate the availability of commercial off-the-shelf (COTS) items that meet technical specifications and traceability requirements. The item requires OEM traceability to Brandywine Communications (CAGE 03NF8), and suppliers must demonstrate commercial item status under FAR 2.101(b) by providing sales history, commercial warranties, catalogs, and pricing documentation. Non-OEM suppliers must establish full traceability to the original manufacturer. The proposed delivery term is FOB Origin, and the Government intends to procure 50 units, though no contract value or pricing data has been established. Special requirements include the potential for option years with economic price adjustment and the necessity for suppliers to confirm compliance with commercial item criteria, including evidence of public sales and standard commercial practices. No formal contract clauses, evaluation factors, packaging standards, or inspection criteria are detailed at this stage, as this notice serves solely to inform future procurement decisions. The Government is not using commercial item acquisition policies under FAR Part 12 but invites industry to identify if a commercial item can satisfy the requirement within 15 days of notice. Responses must be submitted via email to Brendan Heasley at DLA Mechanicsburg, and no competitive solicitation has been issued; the Government reserves the right to proceed with a sole-source acquisition under FAR 6.302-1 if market research supports it.
SPRMM1 DLA Mechanicsburg

POSTED

about 6 hours ago

DEADLINE

in 28 days
View Details
NAICS: 334519
New
Federal
Mass Spectrometer Coupled Thermogravimetric Analyzer (TGA-MS)
Solicitation # FA812626Q0057
The Air Force Sustainment Center at Tinker Air Force Base, Oklahoma, is seeking a firm-fixed-price contract for the acquisition, installation, and commissioning of one Mass Spectrometer Coupled Thermogravimetric Analyzer (TGA-MS) system for the 76th Maintenance Support Group. The required system must meet or exceed the performance specifications of the Netzsch TGA 309 Libra and include shipping, on-site calibration, performance verification, and operator training. This is a total small business set-aside under NAICS code 334519, with the award based on the Lowest Price Technically Acceptable (LPTA) basis. The contractor must complete delivery within eight weeks of the award date to Building 3001 at Tinker AFB, adhering to strict base access and security protocols. Key technical requirements include compliance with MIL-STD-130 for Item Unique Identification and MIL-STD-129 for shipment marking. All invoicing must be processed electronically through the Wide Area WorkFlow (WAWF) system. Quotations are due by August 26, 2026, and must be submitted to the designated contracting officials, with the requirement that all offerors be registered in the System for Award Management (SAM).
FA8126 Afsc Pzimb

POSTED

about 6 hours ago

DEADLINE

in 9 days
View Details
NAICS: 334519
New
DIBBS
Dial Assembly Manufacturing and Supply
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
Case Assembly ManufacturingThis subcontract involves the manufacturing and assembly of case items under NSN 6685009862123 for the Department of Defense, specifically through the ASC Supplier Oper OEM Division. The scope of work encompasses component integration, rigorous quality control, and strict adherence to DLA specifications. The project falls under NAICS code 3345119 and will be performed at Hill AFB in zip code 84056-5734. The opportunity was posted on August 16, 2026, with a response deadline of August 24, 2026. Interested parties must ensure all deliverables meet the technical requirements outlined in the solicitation to maintain compliance with federal defense standards.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
Supply of Pressure Gauges (Dial Indicating)This subcontract through the ASC Commodities Division of the Department of Defense involves the supply and delivery of 12 dial-indicating pressure gauges. The contractor must ensure all items are compliant with DLA technical specifications, including strict adherence to packaging and labeling standards, MIL-STD-129 barcoding, and hazard communication requirements. The project is categorized under NAICS code 334511 and will be performed at Hill AFB, zip code 84056-5734. Interested parties must submit their responses by the deadline of August 24, 2026, following the posting date of August 16, 2026.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 561990
New
DIBBS
Hazard Warning Labeling & Compliance ServicesThe Hazard Warning Labeling and Compliance Services subcontract is issued by the Department of Defense under the ASC Commodities Division. This contract focuses on the application of hazard warning labels to ensure materials and components are handled safely and in full compliance with DFARS 252.223-7001 standards. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 561990. It was posted on August 17, 2026, with a response deadline of September 17, 2026. Interested parties can find further details through the DIBBS portal using the provided solicitation link.
All Other Support Services

POSTED

about 1 hour ago

DEADLINE

in about 1 month
View Details
NAICS: 541611
New
DIBBS
Supply Chain Management & DPAS Compliance CoordinationThis subcontract opportunity, titled Supply Chain Management & DPAS Compliance Coordination, is issued by the Department of Defense under the ASC Commodities Division. The primary objective of the contract is to manage material sourcing and supplier coordination while ensuring strict adherence to Defense Priorities System (DPAS) rating compliance to prioritize fulfillment for national defense requirements. The project is designated as a Total Small Business Set-Aside under FAR 19.5 and falls under NAICS code 541611. Interested parties must submit their responses by September 17, 2026, following the posting date of August 17, 2026.
Administrative Management and General Management Consulting Services

POSTED

about 1 hour ago

DEADLINE

in about 1 month
View Details
NAICS: 339113
New
DIBBS
Defense-Grade Packaging & Marking ServicesThe Defense-Grade Packaging and Marking Services subcontract, issued by the Department of Defense ASC Commodities Division, requires the professional packaging of bearing units in strict accordance with ASTM D3951 standards. The scope of work includes the application of moisture barrier bags and desiccants to ensure product integrity, as well as comprehensive labeling and Unique Identification marking as mandated by MIL-STD-130. This opportunity is designated as a Total Small Business Set-Aside under FAR 19.5, falling under NAICS code 339113. The solicitation was posted on August 17, 2026, with a response deadline of September 17, 2026.
Surgical Appliance and Supplies Manufacturing

POSTED

about 1 hour ago

DEADLINE

in about 1 month
View Details
NAICS: 541380
New
DIBBS
First Article Testing (FAT) & Quality Certification ServicesThis subcontract opportunity, titled First Article Testing (FAT) and Quality Certification Services, is issued by the Department of Defense under the ASC Commodities Division. The primary objective of the contract is to perform independent testing and documentation of the first production unit to ensure full conformance with technical specifications before proceeding to full-scale production. The solicitation was posted on August 17, 2026, with a response deadline of September 17, 2026. This is a Total Small Business Set-Aside under FAR 19.5, categorized under NAICS code 541380. Interested parties can find further details through the DIBBS portal using the provided solicitation link.
Testing Laboratories and Services

POSTED

about 1 hour ago

DEADLINE

in about 1 month
View Details
NAICS: 332991
New
DIBBS
Precision Bearing Unit ManufacturingThe Precision Bearing Unit Manufacturing subcontract, issued by the Department of Defense ASC Commodities Division, requires the full production of 450 plain bearing units. The scope of work encompasses all materials, machining, finishing, and packaging, with a strict requirement for compliance with Government First Article Test specifications. This opportunity is designated as a Total Small Business Set-Aside under FAR 19.5 and falls under NAICS code 332991. The solicitation was posted on August 17, 2026, and the deadline for responses is September 17, 2026.
Ball and Roller Bearing Manufacturing

POSTED

about 1 hour ago

DEADLINE

in about 1 month
View Details
NAICS: 335999
New
DIBBS
TAPE, INSULATION, ELECTR
Solicitation # SPE4A6-26-T-18TL
This contract is for the procurement of red electrical insulation tape under solicitation SPE4A6-26-T-18TL for the Department of Defense. The requirement is for two rolls of tape, each measuring 1 inch in width, 0.0100 inches in thickness, and 27 yards in length, conforming to specification A-A-59163B. The items are designated as critical application items with a 12-month extendable shelf life. Delivery is required within 20 days after the order, with FOB origin terms and inspection and acceptance occurring at the destination. The contractor must adhere to strict quality and packaging standards, including MIL-STD-1916 for sampling, MIL-STD-129 for marking, and DLA packaging requirements. Additionally, the contract mandates compliance with CMMC Level 2 self-assessment and covered defense information regulations.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, POWER, E
Solicitation # SPE4A6-26-T-18QM
This contract is for the procurement of one electrical power cable assembly, identified by NSN 6150-01-729-6259, for the Department of Defense under the ASC Commodities Division. The delivery is required within 20 days after receipt of order, with the place of performance located at Camp Pendleton. The solicitation is managed by the Defense Logistics Agency and requires strict adherence to physical identification marking and the removal of government identification from non-accepted supplies. Quality assurance is governed by zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331, with specific AQLs assigned for critical, major, and minor attributes. Additionally, the contract is subject to strict export controls under ITAR and EAR regulations. Access to technical data is limited to approved contractors with US/Canada Joint Certification Program certification and completed DLA export-control training.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A6-26-T-17XU
This contract is for the procurement of 54 blind rivets, identified as NSN 5320-01-045-3010 and part number NAS1921B04-06. The items are classified as commercial critical application items and must be manufactured according to the current revision of the applicable part standard. Quality assurance is governed by specific DLA technical and quality requirements, including zero-based sampling plans per MIL-STD-1916 or ASQ H1331, and identification marking must comply with MIL-STD-130N. Delivery is required within 171 days, with a need ship date of February 12, 2027. The items are to be delivered FOB Origin to DLA Distribution Jacksonville, Florida. Packaging must adhere to ASTM D3951 and MIL-STD-129, while palletization must follow DLA packaging requirements for procurement. Inspection and acceptance will take place at the destination.
Hardware Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A6-26-T-18SE
This contract is for the procurement of 63 annular ball bearings, identified as a critical application item. The order specifies Honeywell International Inc. and New Hampshire Ball Bearings Inc. as approved sources for part number 74346. Delivery is required within 397 days, with shipping terms set as FOB Origin and inspection and acceptance occurring at the origin. The agreement is subject to strict technical and quality requirements, including DLA master list standards, International Traffic in Arms Regulations (ITAR) for export control, and specific distribution statements for technical drawings. Packaging and preservation must comply with MIL-STD-2073-1E and MIL-DTL-197M. Additionally, the contractor must adhere to restrictions on ozone-depleting substances and ensure all measuring and test equipment meets specified standards.
Ball and Roller Bearing Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, ROLLER, AIRFR
Solicitation # SPE4A6-26-T-18QZ
This solicitation is for the procurement of 16 airframe roller bearings under contract number SPE4A6-26-T-18QZ for the Department of Defense. The items must conform to the specified technical drawings and adhere to strict domestic sourcing restrictions. Specifically, the bearings must be manufactured in the United States or Canada, and more than 50 percent of the total cost of the bearing components must originate from these regions. Contractors are required to submit a formal declaration regarding the domestic or foreign nature of the materials offered to be considered for the award. The contract includes several critical compliance requirements, including CMMC Level 2 certification and adherence to export control regulations under ITAR and EAR. Technical data is restricted to approved contractors with US/Canada Joint Certification Program certification. Delivery is required within 170 days after the order is placed. Failure to provide the necessary sourcing declarations or meet the quality and packaging requirements set by the DLA may result in the disqualification of the quote.
Ball and Roller Bearing Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON H
Solicitation # SPE4A6-26-T-18TK
This contract is for the procurement of 23 hexagon head cap screws, identified by NSN 5305016946165 and part number M712040381. The order is issued by the Department of Defense ASC Commodities Division under solicitation SPE4A6-26-T-18TK, with a required delivery date of January 10, 2027, and a delivery window of 170 days. Shipping is FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards under RP001 and marking guidelines per MIL-STD-129. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331, with a zero-tolerance policy for non-conformances in certain sample lots. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except where functionally required and specified by NAVSEA.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-26-T-18RT
This solicitation, issued by the Department of Defense ASC Commodities Division under contract number SPE4A6-26-T-18RT, is for the procurement of 135 sleeve bushings, identified by NSN 3120-01-166-4435. The required delivery timeframe is 74 days after the order date. Due to the nature of the item, manufacturing may require specific casting or forging and associated tooling, which the government may not provide. The contract is subject to stringent regulatory and quality standards, including CMMC Level 2 certification and adherence to DLA master technical and quality requirements. Because the technical data is subject to ITAR or EAR export controls, contractors must have an approved US/Canada Joint Certification Program certification and complete specific DOD export-control training to access the data. Additional requirements include physical item marking, specific DLA packaging standards, and inspection and acceptance at the point of origin.
Ball and Roller Bearing Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details