Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

TRANSFORMER, POWER AUTO

Active
SPE7M1-26-T-292LFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract solicitation, identified as SPE7M1-26-T-292L, is issued by the Department of Defense Maritime Supply Chain for the procurement of one power autotransformer. The item is identified by NSN 5950-00-053-1368 and corresponds to Superior Electric Holding Group LLC part numbers 5-1199 and EP35139-2. This is designated as a critical application item and is subject to full and open competition. The required delivery date is July 2, 2027, with a need ship date of February 16, 2027, and a delivery window of 168 days after the order. The procurement is subject to specific technical and quality requirements, including DLA packaging requirements RP001 and the removal of government identification from non-accepted supplies per RQ011. Sampling must adhere to MIL-STD-1916 or ASQ H1331, with zero non-conformance requirements for certain lot sizes. Delivery is FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Packaging must comply with ASTM D3951 for non-hazardous materials or TQ requirement IP025 for hazardous materials, and all labeling must follow MIL-STD-129.

General Info

DoD procurement for one power autotransformer, NSN 5950-00-053-1368, due July 2, 2027.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

335311 - Power, Distribution, and Specialty Transformer ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

(1)

SPE7M1-26-T-292L Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN
View Agency Profile
Office AddressUSA
Contacts
Ryan Snyder
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
TRANSFORMER,POWER AUTOTRANSFORMER
TRANSFORMER,POWER AUTOTRANSFORMER
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
58474 EP35139 REV E PC
THE TECHNICAL DATA CITED IN THIS SOLICITATION IS
NOT COMPLETE, HOWEVER, THE ITEM PROVIDED MUST
MEET THE REQUIREMENTS OF THE CITED TECHNICAL
DATA IN ADDITION TO THE REQUIREMENTS OF THE
PART NUMBERED ITEM LISTED ON THIS SOLICITATION.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
FULL AND OPEN COMPETITION APPLIES.
CRITICAL APPLICATION ITEM
SUPERIOR ELECTRIC HOLDING GROUP LLC 58474 P/N 5-1199
SUPERIOR ELECTRIC HOLDING GROUP LLC 58474 P/N EP35139-2
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017985892 0001 EA 1.000
SPE7M1-26-T-292L
SECTION B
PR: 7017985892 PRLI: 0001 CONT’D
NSN/MATERIAL:5950000531368
DELIVERY (IN DAYS):0168
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:02/16/2027 Original Required Delivery Date:07/02/2027
SPE7M1-26-T-292L NSN/Part Number: 5950-00-053-1368 Quantity: 1 EA Purchase Request: 7017985892QTY: 1 Delivery: 168 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335311
New
DIBBS
Power Cable Assembly ManufacturingThe Department of Defense, through the Land Supply Chain agency, is seeking a subcontractor for the manufacture of a branched electrical power cable assembly. This equipment is designated as a critical application item and must strictly adhere to military specifications regarding quality, packaging, and labeling. The work is categorized under NAICS code 335311 and will be performed at Fort Campbell. Interested parties must submit their responses by the deadline of September 11, 2026. The solicitation was officially posted on August 31, 2026, and is managed through the DIBBS procurement system.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335311
New
DIBBS
High-Reliability Cable Assembly ManufacturingThis subcontract involves the manufacture and delivery of a high-reliability military-spec cable assembly identified by NSN 6150016684365. The project requires strict adherence to part-specific compliance standards for CAGE 24575 and CAGE 81361. The contract is issued by the Department of Defense under the ASC Commodities Division, with the place of performance located at Fort Bliss, Texas. The procurement falls under NAICS code 335311. The solicitation was posted on August 31, 2026, with a response deadline of September 8, 2026. Interested parties must ensure all technical specifications for the cable assembly are met to satisfy the requirements of the Department of Defense.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335311
New
DIBBS
POWER SUPPLY
Solicitation # SPE7M1-26-T-322C
This solicitation, issued by the Department of Defense Maritime Supply Chain, is for the procurement of four power supply units under National Stock Number 6120-01-696-4869. The contract requires adherence to specific DLA packaging and quality standards, including the removal of government identification from any non-accepted supplies. Delivery is required within 157 days after the order is received. The solicitation, identified as SPE7M1-26-T-322C, falls under NAICS code 335311 and specifies a place of performance in Tracy, California. Alternate offerors must provide a complete data package for both approved and alternate parts. The primary point of contact for this requirement is Michael Reese.
MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335311
New
DIBBS
WIRING HARNESS, BRAN
Solicitation # SPE4A6-26-T-25GV
This contract is a solicitation for the procurement of five wiring harnesses, identified by NSN 6150-01-717-6264, for the Department of Defense ASC Commodities Division. The requirement is designated as a total small business set-aside under NAICS code 335311. Delivery is required within 343 days, with a need ship date of August 18, 2027, to DLA Distribution San Joaquin in Tracy, California. The procurement is subject to strict technical and quality requirements, including compliance with CMMC Level 2 self-assessment and covered defense information standards. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, and packaging must adhere to MIL-STD-2073-1E and RP001. The items are classified as critical application items and must be produced in accordance with specific Technical Data Package drawings, primarily Revision C and D dated July 23, 2024.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335311
New
DIBBS
POWER SUPPLY
Solicitation # SPE7L1-26-T-05S3
This solicitation, issued by the Department of Defense Land Supply Chain under solicitation number SPE7L1-26-T-05S3, is for the procurement of four power supply units identified by NSN 6120-01-707-2521. The contract requires delivery within 20 days after receipt of the order and falls under NAICS code 335311. The agreement is subject to strict technical and quality requirements, including specific DLA packaging standards and the removal of government identification from any non-accepted supplies. Notably, the contract involves technical data governed by ITAR and EAR export controls, meaning access is restricted to approved contractors with US/Canada Joint Certification Program certification and completed DOD export-control training.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-21NK
This solicitation, issued by the Department of Defense ASC Commodities Division under solicitation number SPE4A6-26-T-21NK, is for the procurement of one branched electrical special purpose cable assembly, identified by NSN 6150-01-660-0430. The requirement is for a single unit with a delivery timeline of 10 days after order. Performance is located at Fort Stewart, Georgia, and the procurement falls under NAICS code 335311. The contract is subject to several critical technical and quality requirements, including DLA packaging standards, quality conformance inspections, and the removal of government identification from non-accepted supplies. Notably, the item contains technical data subject to ITAR or EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specific DOD export-control training. Item Unique Identification is not required for this specific request.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-24ZC
This solicitation from the Department of Defense ASC Commodities Division is for the procurement of two cable assemblies under NSN 6150-01-668-4365. The contract identifies specific part numbers 803148 and 5-1-4252 associated with CAGE codes 24575 and 81361. Delivery is required within 20 days after receipt of the order, with performance located at Fort Bliss. The contract mandates strict adherence to quality and security standards, including CMMC Level 2 certification and compliance with ITAR and EAR export controls. Technical data is restricted to approved contractors with US/Canada Joint Certification Program certification. Quality assurance will be managed through zero-based sampling plans according to MIL-STD-1916 or ASQ H1331, and the supplier must follow DLA packaging and marking requirements.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, POWE
Solicitation # SPE7L1-26-T-05K8
This contract is for the procurement of five branched electrical power cable assemblies, identified by NSN 6150-01-677-4842 and Oshkosh Defense part number 12601090. This is a critical application item with a required delivery date of August 4, 2026, and a delivery window of 20 days. The shipment is to be delivered FOB Origin to the Special Operations Aviation Command at Fort Campbell, Kentucky, using traceable shipping methods. The supplier must adhere to DLA Master List technical and quality requirements, specifically regarding packaging standards ASTM D3951 and MIL-STD-129, as well as RP001 packaging requirements. A strict prohibition is placed on the use of Class I ozone-depleting chemicals in the manufacturing of these items. Inspection and acceptance will take place at the destination, and the contract allows for zero quantity variance.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335311
New
DIBBS
DETECTOR, HEAT
Solicitation # SPE4A6-26-T-04RZ
The contract pertains to the procurement of a single Heat Detector with NSN 6350-01-728-9888, scheduled for delivery within five days of award under solicitation SPE4A6-26-T-04RZ. The item may be manufactured using Additive Manufacturing techniques as authorized by the design activity’s technical documentation, with flexibility allowed in production methods. Compliance with stringent quality and technical standards is mandatory, governed by MIL-STD-1916 or ASQ H1331 sampling plans, where critical, major, and minor attributes are verified at levels VII, IV, and II with AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes are treated as major unless otherwise defined. The contractor must adhere to DLA packaging requirements, remove government identifiers from non-accepted items, and apply physical marking as specified. Cybersecurity requirements mandate CMMC Level 2 certification for third-party assessors, and all technical data is subject to export controls under ITAR or EAR, restricting access to foreign nationals without explicit authorization and requiring compliance with DFARS 252.225-7048. Access to classified technical data is limited to DLA contractors with approved US/Canada JCP certification, completed training on handling defense export-controlled data, and formal DLA approval. Covered defense information applies, and the contract is tied to a federal acquisition under NAICS 335311, with performance location in Pascagoula, Mississippi, and point of contact at the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335311
New
DIBBS
CONTACTOR, MAGNETIC
Solicitation # SPE7M1-26-T-293M
This contract, identified as solicitation SPE7M1-26-T-293M, is for the procurement of one magnetic contactor, part number IC5181D104A6XAAX, manufactured by Ward Leonard CT LLC. The item is classified as a critical application item under NSN 6110-01-117-0888. This is a total small business set-aside under NAICS code 335311, issued by the Department of Defense Maritime Supply Chain. The required delivery date is March 20, 2027, with a need ship date of February 16, 2027, and a delivery timeframe of 168 days after order. The contract mandates strict environmental compliance, prohibiting the use of Class I ozone depleting chemicals and the intentional addition of mercury or mercury containing compounds, except for specific functional exceptions. Technical and quality requirements are governed by the DLA Master List, including specific packaging standards under RP001 and marking requirements per MIL-STD-129. Delivery is FOB Origin, with inspection and acceptance occurring at the destination, specifically DLA Distribution San Joaquin in Tracy, California.
MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335311
New
DIBBS
DETECTOR, HEAT
Solicitation # SPE4A6-26-T-06BM
The contract pertains to the procurement of ten heat detectors identified by NSN 6350-01-728-9888 under solicitation SPE4A6-26-T-06BM, with a delivery deadline of 171 days after award. The contract permits the use of additive manufacturing for components or sub-processes as authorized by the designated technical data package or design activity reference number. Compliance with Cybersecurity Maturity Model Certification Level 2 is mandatory, requiring performance by a certified third-party assessment organization. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must adhere to DLA standards, and non-accepted supplies must have all government identification removed. Items must be physically marked as specified, and sampling must follow MIL-STD-1916 or ASQ H1331, Table 1, with verification levels and AQLs assigned per attribute criticality, or default to major if unspecified. Zero non-conformances are required for acceptance unless otherwise stated. The item involves controlled technical data subject to ITAR or EAR, prohibiting unauthorized export or disclosure to foreign persons, including foreign nationals in the U.S., with DFARS 252.225-7048 governing compliance. Only DLA contractors with approved U.S./Canada Joint Certification Program status, completed training, and DLA authorization may access this data. The contracting activity is the Department of Defense’s ASC Commodities Division, with performance located in New Cumberland, Pennsylvania, and primary contact information provided for inquiries.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335311
New
DIBBS
TRANSFORMER, POWER
Solicitation # SPE7M1-26-Q-1448
This contract is a firm fixed price solicitation for the procurement of five power transformers, identified by NSN 5950-01-328-8982. The items are designated as critical application items and must adhere to source controlled drawings, with approved sources including Payne Magnetics, Inc. and Rockwell Collins, Inc. Delivery is required within 102 days after order, with the final destination and acceptance point located at DLA Distribution San Diego. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific packaging standards under RP001 and MIL-STD-129. Quality assurance will be managed through sampling methods consistent with MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance. All supplies must be delivered in accordance with the specified technical data package and configuration management protocols.
MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

NAICS: 541611
New
DIBBS
Domestic Sourcing and Compliance AdvisoryThe Domestic Sourcing and Compliance Advisory subcontract is issued by the Department of Defense under the Maritime Supply Chain agency. The selected provider will deliver specialized advisory services to ensure strict adherence to the Buy American Act, the Berry Amendment, and DFARS 252.225-7001 regulations within defense procurement processes. This opportunity falls under NAICS code 541611 and is to be performed in New Cumberland. Interested parties must submit their responses by the deadline of September 11, 2026.
Administrative Management and General Management Consulting Services

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 493190
New
DIBBS
Military-Compliant Packaging and Palletization ServicesThis subcontract opportunity with the Department of Defense Maritime Supply Chain requires the provision of packaging, preservation, and palletization services for defense cable shipments. The contractor must ensure all work is fully compliant with MIL-STD-2073-1E and RP001 standards to meet military specifications. The project is categorized under NAICS code 493190 and will be performed in New Cumberland, Pennsylvania. Interested parties must submit their responses by September 11, 2026, following the posting date of August 31, 2026.
Other Warehousing and Storage

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335921
New
DIBBS
Electrical Power Cable Supply and ManufacturingThe Department of Defense, through the Maritime Supply Chain, is seeking a subcontractor for the manufacture and supply of 1,000 feet of electrical power cable. The required materials must be fully compliant with MIL-DTL-12000 standards and include military-specification packaging, preservation, and marking. This procurement falls under NAICS code 335921 and will be performed in New Cumberland, Pennsylvania. Interested parties must submit their responses by the deadline of September 11, 2026. The solicitation was officially posted on August 31, 2026, and further details regarding the submission process can be accessed via the provided DIBBS link.
Fiber Optic Cable Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335999
New
DIBBS
Supply of Electric Brake (NSN: 6110012921754)The Department of Defense, through the Maritime Supply Chain, is seeking a subcontract for the manufacture or supply of one electric brake component, identified by NSN 6110012921754. The contractor must ensure the component complies with all federal and defense specifications, including strict adherence to domestic sourcing, packaging, and marking standards. The contract is categorized under NAICS code 335999 and requires delivery FOB destination within 20 days. Interested parties must submit their responses by September 11, 2026, for performance at the FPO 96607 location.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541611
New
DIBBS
Domestic Source Compliance and ReportingThis subcontract opportunity, titled Domestic Source Compliance and Reporting, is issued by the Department of Defense under the Maritime Supply Chain agency. The primary objective is to ensure strict adherence to the Buy American Act and DFARS 252.225-7001 by verifying the domestic origin of materials and providing all necessary disclosures regarding any non-domestic content. The work is associated with NAICS code 541611 and is slated for performance at Fort Drum. The solicitation was posted on August 31, 2026, with a response deadline of September 11, 2026. Interested parties must comply with the specified reporting and verification requirements to maintain regulatory alignment with federal procurement standards for domestic sourcing.
Administrative Management and General Management Consulting Services

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 493190
New
DIBBS
Packaging and Preparation for ShipmentThis subcontract opportunity with the Department of Defense Maritime Supply Chain involves the military-specification packaging, preservation, and labeling of electrical cable. The work must adhere to MIL-STD-2073-1E standards, specifically requiring preservation method ZZ and cleaning and drying level 1, along with appropriate hazardous material labeling where applicable. The project will be performed at Fort Drum, New York, under NAICS code 493190. Interested parties must submit their responses by the deadline of September 11, 2026.
Other Warehousing and Storage

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335999
New
DIBBS
Electrical Power Cable SupplyThis subcontract with the Department of Defense Maritime Supply Chain involves the supply of power and electrical cable, identified by NSN 6145005773438. The requirement consists of two CLINs, 0001 and 0002, each for 1,000 feet of cable. These quantities are subject to a variance of plus 10 percent and minus 0 percent. The contract specifies a delivery timeline of 10 days with shipping terms set as FOB Origin. Performance will take place in Fort Drum, New York, under NAICS code 335999. The response deadline for this solicitation is September 11, 2026.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance and LabelingThe Hazardous Materials Compliance and Labeling subcontract is issued by the Department of Defense under the Maritime Supply Chain agency. The primary objective of this contract is to ensure full compliance with OSHA Hazard Communication Standards, specifically focusing on the proper labeling of hazardous materials and the effective management of Safety Data Sheets. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 541620. The contract was posted on August 31, 2026, with a response deadline of September 11, 2026. Performance for these services will take place at the FPO location in zip code 96672.
Environmental Consulting Services

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 561910
New
DIBBS
Military-Grade Packaging and Palletization ServicesThis subcontract opportunity with the Department of Defense Maritime Supply Chain involves providing specialized packaging, labeling, and palletization services for precision valves. The contractor must ensure all deliverables strictly adhere to military standards, specifically MIL-STD-2073-1E, MIL-STD-129, and DLA RP001. The project is designated as a Total Small Business Set-Aside under NAICS code 561910. Performance will take place at FPO 96672, and interested parties must submit their responses by September 11, 2026.
Packaging and Labeling Services

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
Precision Valve Manufacturing and SupplyThis subcontract opportunity with the Department of Defense Maritime Supply Chain involves the manufacture and supply of a precision linear directional control valve, identified by NSN 4810014554998 and part number PC50430-500. The scope of work encompasses the entire production cycle, including manufacturing to military specifications, rigorous quality control, packaging, and final delivery. The contract is designated as a total small business set-aside under NAICS code 332911. Interested parties must submit their responses by September 11, 2026, for performance in FPO, zip code 96672.
Industrial Valve Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334412
New
DIBBS
Supply of CONTROL-MONITORING UNIT, ELECTRICAL-ELECT (NSN 5998-01-722-1555)This subcontract, issued by the Department of Defense Maritime Supply Chain, requires the manufacture, testing, packaging, and delivery of one fully assembled electrical-electronic control-monitoring unit. The equipment must adhere to National Stock Number 5998-01-722-1555 and meet all specified part numbers and traceability requirements. The project falls under NAICS code 334412 and will be performed in Mechanicsburg, Pennsylvania. Interested parties must submit their responses by the deadline of September 15, 2026.
Bare Printed Circuit Board Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334418
New
DIBBS
Supply of Crystal Controlled Oscillators (NSN: 5955017387764)The Department of Defense, through the Maritime Supply Chain agency, is seeking a subcontract for the manufacture or supply of one Crystal Controlled Oscillator, identified by NSN 5955017387764. The required component must comply with military specifications and include all necessary packaging and labeling. Delivery is based on FOB origin terms, with a final destination inspection required to ensure quality and compliance. This opportunity falls under NAICS code 334418 and is designated for performance in New Cumberland, Pennsylvania. Interested parties must submit their responses by September 11, 2026, following the posting date of August 31, 2026.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details