Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

TRANSFORMER, POWER

Active
SPE7M0-26-Q-1061Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract solicits one unit of a power transformer with NSN 5950-00-647-2307 under purchase request 7017493697, with delivery required within 30 days after order award. The item is marked as discontinued production with no available data, necessitating the alternate offeror to submit a complete data package including information for both the approved and alternate parts. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and the applicable revision is determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless an amendment supersedes it. The removal of government identification from non-accepted supplies must comply with DESC Form 148 dated October 16, 1987. The solicitation number is SPE7M0-26-Q-1061, issued on July 15, 2026, with responses due by July 30, 2026. The contracting activity falls under the Department of Defense, specifically the Maritime Supply Chain ESOC Buys, with performance located at Fort Riley, Kansas, 66442-5936. Primary point of contact is Audrey Acuna, reachable via email and phone provided.

General Info

One discontinued power transformer requested, delivery in 30 days, alternate data package required, solicitation closes July 30, 2026.

Agency

Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYSView Agency

NAICS

335311 - Power, Distribution, and Specialty Transformer ManufacturingView NAICS

Place of Performance

BUILDING 8100 1ST DIVISION RD, FORT RILEY, KS, 66442-5936, US

Set-Aside

NONE

Documents

(1)

SPE7M0-26-Q-1061.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS
View Agency Profile
Office AddressUS
Contacts
Audrey Acuna
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
ITEM NAME TRANSFORMER,POWER,S
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
DESC FORM 148 DATED 10/16/87 APPLIES.
DISCONTINUED PRODUCTION.
NO DATA IS AVAILABLE. THE ALTERNATE OFFEROR IS
REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE
INCLUDING DATA FOR THE APPROVED AND ALTERNATE
PART FOR NSN/Part Number: 5950-00-647-2307 Quantity: 1 EA Purchase Request: 7017493697QTY: 1 Delivery: 30 days ADO

Similar Contracts

NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, SPECThe contract specifies the procurement of a single cable assembly with NSN 6150-20-013-5944 and part number 10798461-071, under solicitation SPE7L4-26-T-5644, with a required delivery within 20 days from the contract award date, originally set for July 13, 2026. The item is to be delivered FOB origin under a fixed quantity of one unit with zero variance allowed, inspected and accepted at the destination, and shipped via traceable freight methods excluding parcel post. Packaging must comply with MIL-STD-2073-1E, including prescribed preservation methods, packaging materials, and container types, with marking adherence to MIL-STD-129 and no special marking required. Palletization follows DLA’s packaging requirements, and the delivery address is the U.S. Army TACOM facility at Detroit Arsenal, Michigan. Technical and quality compliance is governed by referenced standards in the DLA Master List, with sampling governed by MIL-STD-1916 or comparable zero-based plans, where critical, major, and minor attributes are verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Acceptance requires zero non-conformances in the sample lot unless contractually modified. The contract is issued by the Department of Defense through the LSO Combat Vehicles and Armament office, with primary contact information and electronic access details provided for submission and inquiry.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, SPECThis contract specifies the procurement of a single cable assembly with part number 6150200135942 and NSN 6150-20-013-5942, requiring delivery of one unit within twenty days under solicitation SPE7L4-26-T-5643. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling procedures mandated to follow MIL-STD-1916 or ASQ H1331,Table 1, or an equivalent zero-based plan, enforcing zero non-conformances unless otherwise stated. Attributes are to be classified with verification levels VII, IV, and II for critical, major, and minor parameters respectively, and unspecified attributes are treated as major. Packaging must comply with MIL-STD-2073-1E, with marking strictly adhering to MIL-STD-129 and no special marking codes applied. Palletization follows DLA’s packaging requirements, and shipment must be conducted via traceable freight methods—parcel post is prohibited. Delivery is FOB origin, with inspection and acceptance occurring at destination. The item is to be delivered to the U.S. Army TACOM facility at Detroit Arsenal, Michigan, with a required delivery date of July 13, 2026, and no tolerance for quantity variance. The contract references unit of issue standards aligned with ANSI X12 and includes specific logistical identifiers including the shipping point W56DRX, project code TP 3, and government-only fields for internal tracking and distribution.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335311
New
SLED
ITB-2026-006 Penn Turpin Transformer ReplacementThe Town of Bedford Electric Department is soliciting bids for the replacement of a transformer at the Penn Turpin Station Electrical Substation in Bedford, Virginia. The solicitation, identified as IFB-124434, invites qualified vendors to submit proposals for a new or like-new transformer that meets the operational and technical requirements of the substation. Bids must be submitted by the deadline of August 13, 2026, at 7:00 PM EST, and the request was posted on July 15, 2026. The procurement is open to all eligible vendors without a specific setaside classification, and the contract will be awarded based on compliance, technical suitability, and cost-effectiveness. The transformer must be compatible with existing infrastructure and capable of ensuring reliable power delivery to the local grid. All proposals must be directed to Crystal McGraw, the point of contact for this solicitation, via email at chosey@bedfordva.gov or by phone at 540-587-6041. The place of performance is specifically the Penn Turpin Station in Bedford, Virginia, and vendors are expected to coordinate delivery, installation, and any necessary coordination with the Town’s Electric Department. While no NAICS code is specified, the nature of the work falls under electrical infrastructure maintenance and upgrade. Bidders are encouraged to review the full solicitation details through the provided online portal to ensure full compliance with all technical specifications, safety standards, and contractual obligations before submitting their response.
Town of Bedford

POSTED

about 7 hours ago

DEADLINE

in 29 days
View Details
NAICS: 335311
New
Federal
CABLE ASSEMBLY,SPECThis contract solicitation issued by the Department of Defense through DLA Mechanicsburg seeks quotations for multiple specialized components including a CABLE ASSEMBLY, CHASSIS,ELECTRICAL, PROGRAMMED CFC, and CIRCUIT CARD ASSEMB, all requiring strict compliance with military standards. The items must be manufactured to precise technical specifications, including adherence to MIL-STD-130 Rev N for marking, MIL-STD-2073 for packaging, and ANSI/ESD S20.20 for electrostatic discharge control where applicable. A critical requirement is the mercury-free status of all items due to their intended use in submarines and surface ships, with strict prohibitions against mercury contamination and mandatory procedures for any necessary exceptions involving metallic mercury. Contractors must be authorized distributors of the original equipment manufacturer, and all changes to design, material, or part number require explicit written approval from the contracting officer under a defined code system. All proposals must be submitted electronically via the Procurement Integrated Enterprise Environment (PIEE) using the Wide Area Workflow Payment system, and the award will follow the Lowest Price Technically Acceptable criteria. Compliance with security and cybersecurity protocols is required, including CMMC Level 1 self-certification, and contractors must maintain comprehensive inspection records for 365 days after delivery. Government inspections may occur at source, and delivery must meet specified performance conditions. The solicitation enforces strict controls on document distribution, mandates the use of specific cage codes and reference numbers, and prohibits unauthorized production facility changes without a $250 administrative cost reduction. Contractors are further directed to register for electronic data access, provide valid contact information, and submit proof of authorization as a distributor with their offer to be considered. The response deadline is September 10, 2026, and all deliveries are subject to inspection and acceptance by the government at designated locations.
SPRMM1 DLA Mechanicsburg

POSTED

about 11 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 335311
New
DIBBS
Motor Controller Supply (COTS Component)The contract entails the direct procurement of a commercial off-the-shelf motor controller identified by NSN 6110014111367 for delivery to DLA Land and Maritime, part of the Department of Defense. This is a subcontract for an existing electronic component intended for integration into defense systems or addition to inventory, with no special set-aside provisions or small business requirements specified. The North American Industry Classification System code 335311 indicates the category pertains to electric lighting and wiring equipment manufacturing. The solicitation was posted on July 14, 2026, and the award is linked through the DIBBS system under contract number SPE7M126P3539. No specific place of performance or point of contact is provided, and the address details remain undefined, reflecting a standardized procurement process for standardized military components.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details