Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

TRANSFORMER, RADIO FREQ

Active
SPE7M1-26-T-295PFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of four radio frequency transformers, identified by NSN 5950-01-371-1295 and part number K781-11 from Payne Magnetics, Inc. The agreement is managed by the Department of Defense Maritime Supply Chain under solicitation number SPE7M1-26-T-295P. Delivery is required within 168 days, with a required delivery date of December 15, 2026, and a need ship date of February 16, 2027. The items are to be delivered FOB Origin with inspection and acceptance occurring at the destination, specifically DLA Distribution Warner Robins in Georgia. The contract mandates strict adherence to DLA packaging requirements, including RP001 and MIL-STD-129, with specific guidelines for hazardous and non-hazardous materials. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan for acceptance. Technical and quality requirements are further defined by the DLA Master List, which takes precedence over commercial packaging standards. The contract specifies a zero percent quantity variance and requires the removal of government identification from any non-accepted supplies.

General Info

DoD procurement of four radio frequency transformers from Payne Magnetics by December 2026.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

334416 - Capacitor, Resistor, Coil, Transformer, and Other Inductor ManufacturingView NAICS

Place of Performance

BLDG 376, ROBINS A F B, GA, 31098-1887, USA

Set-Aside

NONE

Documents

(1)

SPE7M1-26-T-295P RFQ

PDF•18 pages•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN
View Agency Profile
Office AddressUSA
Contacts
Ryan Snyder
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
TRANSFORMER,RADIO FREQUENCY
TRANSFORMER,RADIO F
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
PAYNE MAGNETICS, INC. 09798 P/N K781-11
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017984238 0001 EA 4.000
NSN/MATERIAL:5950013711295
DELIVERY (IN DAYS):0168
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
SPE7M1-26-T-295P
SECTION B
PR: 7017984238 PRLI: 0001 CONT’D
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3119
DLA DISTRIBUTION WARNER ROBINS
455 BYRON STREET
BLDG 376
ROBINS A F B GA 31098-1887
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3119
DLA DISTRIBUTION WARNER ROBINS
455 BYRON STREET BLDG 376
ROBINS A F B GA 31098-1887
US
Need Ship Date:02/16/2027 Original Required Delivery Date:12/15/2026
SPE7M1-26-T-295P NSN/Part Number: 5950-01-371-1295 Quantity: 4 EA Purchase Request: 7017984238QTY: 4 Delivery: 168 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334416
New
DIBBS
TRANSFORMER, POWER AUTO
Solicitation # SPE7M1-26-U-5704
This solicitation, issued by the Department of Defense Maritime Supply Chain, is for the procurement of 26 power autotransformers under NSN 5950-01-046-8147. The contract is designated as a total small business set-aside under NAICS code 334416, with a required delivery timeframe of 118 days after the order is placed. The agreement mandates adherence to DLA packaging requirements and technical quality standards as specified in the DLA Master List. Additionally, the contract requires the removal of government identification from any non-accepted supplies and stipulates that alternate offerors must provide a complete data package for both approved and alternate parts.
MARITIME SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334416
New
DIBBS
TRANSFORMER, POWER
Solicitation # SPE4A0-26-T-4691
This contract, identified as SPE4A0-26-T-4691, is a solicitation from the Department of Defense Aviation Supply Chain for the procurement of power transformers, specifically part number S6157-61056-001 under NSN 5950016965602. The agreement consists of three line items, each for a quantity of one unit, with a required delivery timeframe of five days after receipt of order. Delivery is set as FOB Origin, with inspection and acceptance occurring at the destination, specifically Davis-Monthan Air Force Base in Arizona. The contract mandates strict adherence to DLA technical and quality requirements, including supply chain traceability documentation and specific packaging standards based on whether the material is classified as hazardous. While Item Unique Identification is not required, the contractor must follow MIL-STD-129 for marking and labeling. Quality assurance is managed through authorized certificate of conformance procedures, and an alternate sampling plan from Sikorsky Corporation is acceptable provided it meets ASQ H1331 or MIL-STD-1916 standards.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334416
New
DIBBS
REACTOR
Solicitation # SPE7M1-26-U-5483
Solicitation SPE7M1-26-U-5483, issued by the Department of Defense Maritime Supply Chain, is a request for quotations for 40 units of a reactor, identified by NSN 5950-00-751-9547. This is a restricted source item requiring engineering source approval by the government design control activity. The contract is intended as a unilateral indefinite delivery contract below the Simplified Acquisition Threshold for a one-year period, with a required delivery timeframe of 68 days after receipt of order. The procurement is subject to strict technical and quality requirements, including DLA packaging standards and specific configuration change management protocols. Quality assurance and sampling must adhere to MIL-STD-1916 or ASQ H1331, with specific verification levels assigned to critical, major, and minor attributes. Alternate offerors must provide comprehensive documentation per MIL-T-31000, including detailed drawings, process sheets, and shock extension reports. If original equipment manufacturer drawings are unavailable, offerors must submit a detailed engineering analysis report covering the reverse engineering process and the rationale for dimension tolerances.
MARITIME SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334416
New
DIBBS
CAPACITOR, FIXED, PLASTI
Solicitation # SPE7M5-26-Q-0987
This solicitation, issued by the Department of Defense Active Devices Division, is for the procurement of 14 fixed plastic dielectric capacitors under NSN 5910-01-496-8221. The contract is a total small business set-aside with a delivery window of 418 days after the order is placed. Performance is designated for San Diego, California, and the items must adhere to source-controlled drawings, meaning only approved sources cited on the drawing are eligible unless otherwise authorized by the cognizant design activity. Compliance requirements are stringent, including CMMC Level 2 certification for third-party assessment and adherence to strict DLA packaging, marking, and quality conformance inspection standards. Because the item involves technical data subject to ITAR or EAR export controls, contractors must have an approved US/Canada Joint Certification Program certification and complete specific DOD export-controlled data training. All supplies must undergo inspection and acceptance at the origin and comply with the DLA master list of technical and quality requirements.
ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, FIXED, COMPOSI
Solicitation # SPE7M0-26-Q-1277
This firm fixed price contract, identified as SPE7M0-26-Q-1277, is for the procurement of one fixed composition resistor with NSN 5905-00-232-3110. The item must adhere to specific technical data packages and basic specifications MIL-R-39008/5B and MIL-R-39008C, and it must be sourced from a Qualified Products List or Qualified Manufacturers List. Delivery is required within 30 days after receipt of order, with shipping handled via the fastest traceable means to the AF Supply Control center at Robins AFB, Georgia. The contract mandates strict adherence to DLA packaging and marking requirements, including MIL-STD-129 and IPC/JEDEC J-STD-609 for lead finish identification on unit packages. There is a strict prohibition against the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions. Inspection and acceptance will occur at the destination, and the contractor must comply with the DLA Master List of Technical and Quality Requirements.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 18 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, VARIABLE, WIRE
Solicitation # SPE7M1-26-U-5708
This contract is for the procurement of 24 non-precision, wire-wound variable resistors, identified by NSN 5905-00-626-2709 and part numbers ST5M1259L1 or 55-65-157. The items are designated as critical application items and must be delivered FOB Origin within 109 days. The procurement is managed by the Department of Defense Maritime Supply Chain, with specific requirements for lead finish marking in accordance with IPC/JEDEC J-STD-609 and packaging standards following MIL-STD-2073-1E and RP001. Compliance is required for several technical and environmental mandates, including the prohibition of Class I ozone-depleting substances and the restriction of intentionally added mercury, except where specified by NAVSEA. Quality assurance and sampling must adhere to MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. The contract also incorporates DLA master lists for technical and quality requirements, as well as specific protocols for configuration change management and physical item marking.
MARITIME SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR NETWORK, FI
Solicitation # SPE7M5-26-T-461J
This contract is for the procurement of four units of a resistor network, identified by NSN 5905013267819 and part number M8340101KA007GJ. The item is a qualified product subject to the Qualified Products List (QPL) and must adhere to technical specifications MIL-PRF-83401/1H(4) and MIL-PRF-83401H(5) SUP 1. Delivery is required within 20 days, with the shipping destination being Fort Drum, New York. The contractor must comply with strict packaging and marking standards, including MIL-STD-2073-1E, MIL-STD-129, and MIL-DTL-39032. Specific requirements include the application of IPC/JEDEC J-STD-609 markings for lead finish identification. Additionally, the use of Class I ozone-depleting substances is prohibited unless written approval is granted by the contracting officer. Inspection and acceptance will take place at the destination.
ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, VARIABLE, NONW
Solicitation # SPE7M1-26-Q-1466
This contract, identified as SPE7M1-26-Q-1466, is a firm fixed price procurement for eight non-wire wound, non-precision variable resistors under NSN 5905-01-291-0674. The delivery is required within 204 days after the order is placed, with a material need date of April 10, 2027. Inspection and acceptance will occur at the destination, and the items are to be shipped to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to DLA packaging and marking requirements, including MIL-STD-129 and IPC/JEDEC J-STD-609 for lead finish identification on individual unit packs. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, with a zero-based sampling plan. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions. Technical specifications are based on drawing 16236 RE-012910674 Revision A.
MARITIME SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334416
New
DIBBS
CAPACITOR, FIXED, MICA D
Solicitation # SPE7M2-26-T-6701
This contract is for the procurement of 31 fixed mica dielectric capacitors, identified by NSN 5910-01-093-6317 and part number CMR03F201GOAR. The items are classified as commercial critical application items and must adhere to MIL-PRF-39001/5F and MIL-PRF-39001F specifications. The contract requires compliance with DLA packaging and quality requirements, including specific sampling methods per MIL-STD-1916 or ASQ H1331, and mandates the use of a Qualified Products List or Qualified Manufacturers List. Key restrictions include a prohibition on the intentional addition of mercury and the use of Class I ozone-depleting substances. Marking must comply with MIL-STD-129 and IPC/JEDEC J-STD-609 for lead finish identification. Delivery is set for 168 days after order, with the final destination and acceptance point located at DLA Distribution Warner Robins in Georgia. The required delivery date is May 1, 2027, with a need ship date of March 2, 2027.
NUCLEAR REACTOR PROGRAM

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, VARIABLE, W
Solicitation # SPE7M0-26-T-073A
This solicitation, issued by the Department of Defense under the Maritime Supply Chain ESOC Buys, is for the procurement of one nonprecision wire wound variable resistor, identified by NSN 5905-00-806-3043. The contract requires delivery within five days after receipt of order and adheres to NAICS code 334416. The procurement is subject to specific DLA packaging requirements and technical quality standards as outlined in the DLA Master List. Key compliance mandates include the removal of government identification from non-accepted supplies and strict physical identification and bare item marking. There is a strict prohibition on the use of Class I ozone-depleting substances during design, manufacturing, or testing unless written approval is granted by the contracting officer. Additionally, alternate offerors must provide a complete data package for both approved and alternate parts.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334416
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE7M5-26-T-461X
This contract is a solicitation from the Department of Defense Active Devices Division for the procurement of 17 thermal resistors. The requirement is designated as a total small business set-aside under NAICS code 334416, with a delivery timeline of 529 days after receipt of order. The items must be marked and identified according to MIL-STD-130 and comply with IPC/JEDEC J-STD-609 for lead finish labeling on individual unit packs. Compliance requirements are extensive, including CMMC Level 2 certification for third-party assessment and adherence to DLA master lists for technical and quality requirements. Quality assurance must follow MIL-STD-1916 or ASQ H1331 sampling plans. Additionally, the contract mandates strict export control of technical data under ITAR and EAR regulations, requiring contractors to have approved US/Canada Joint Certification Program certification and specific training to access controlled data.
ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334416
New
TRANSMITTER,INDUCTI — 6605993302351 — N0038326QSC19
Solicitation # N0038326QSC19
The Department of the Navy, through the Navsup Weapon Systems Support agency, has issued solicitation N0038326QSC19 for the procurement of an inductive transmitter. This requirement is managed by the office located in Philadelphia, Pennsylvania, which also serves as the designated place of performance. The solicitation was posted on September 3, 2026, with a response deadline set for October 5, 2026, at 8:30 PM. Vendors must adhere to a specific part number format where the CAGE code occupies positions 1 through 6 and the part number occupies positions 7 through 40.
Navsup Weapon Systems Support

POSTED

1 day ago

DEADLINE

in about 1 month
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

NAICS: 326122
New
DIBBS
PIPE, BENT, METALLIC
Solicitation # SPE7M1-26-T-327B
This contract is for the procurement of five metallic bent pipes, identified by NSN 4710016702781 and JCB Inc. part number 400/S5989. The items are designated as critical application items and must be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The delivery timeline is set for 118 days after order, with a required delivery date of April 24, 2026. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements and prohibits the use of Class I ozone depleting chemicals. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following RP001 requirements. Shipping is established as FOB Origin, while both inspection and acceptance will occur at the destination.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335999
New
DIBBS
SOLENOID, ELECTRICAL
Solicitation # SPE7M1-26-U-5706
This contract, identified as SPE7M1-26-U-5706, is for the procurement of 70 electrical solenoids with NSN 5945-01-558-8900 and part number S2X-6116H from Edro Corporation. The delivery is required within 106 days, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The agreement mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards, including specific lead finish labeling per IPC/JEDEC J-STD-609. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds, except where functionally required by NAVSEA specifications. Technical and quality requirements are governed by the DLA Master List, and the quantity variance is set at plus or minus 0 percent.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACLE, E
Solicitation # SPE7M1-26-U-5391
This procurement request from DLA Land and Maritime is for 146 units of connector receptacles under NSN 5935014079905. The solicitation is structured as a potential Automated Indefinite Delivery Contract with a one year term or a maximum aggregate value of 350,000.00 dollars. A guaranteed minimum quantity of 21 units is established, with an estimated two orders per year. Delivery is required within 88 days after the order is received, with shipments going to various CONUS and OCONUS DLA Depots. This is a Qualified Products List item and the solicitation is conducted as a Request for Quote under NAICS code 334417. All responsible sources are invited to submit electronic quotes by the deadline of September 2, 2026. The procurement is managed by the Department of Defense office located in Columbus, Ohio, and all submissions and inquiries must be handled electronically through the specified DLA portals.
Electronic Connector Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332911
New
DIBBS
CAP, VALVE
Solicitation # SPE7M1-26-T-326R
This contract is for the procurement of one valve cap, identified by NSN 4820012203920 and part number 2192-0092-1 from Mission Systems Orchard Park Inc. The item is designated as a critical application item and must be delivered within five days after the order. The delivery is FOB Origin with inspection and acceptance occurring at the destination, specifically the DD Depot at Tinker AFB, Oklahoma. The supplier must adhere to DLA packaging requirements, including ASTM D3951 and MIL-STD-129 for marking and labeling. The contract strictly prohibits the use of Class I ozone depleting chemicals in the production of the item. All technical and quality requirements are governed by the DLA Master List, and shipments must be sent via the fastest traceable means, explicitly excluding parcel post.
Industrial Valve Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
VALVE, LINEAR, DIRECTION
Solicitation # SPE7M1-26-Q-1418
This contract is for the procurement of seven linear directional control valves, identified by part number K401145 and NSN 4810-01-391-1501. The delivery is scheduled for 529 days after order, with shipping and acceptance designated for DLA Distribution Anniston in Alabama. The supplier must adhere to strict compliance standards, including CMMC Level 2 self-assessment and the protection of covered defense information. Packaging and marking must follow MIL-STD-129, MIL-STD-130, and ASTM D3951, ensuring each unit is marked with the lot and serial number, as well as the contractor and manufacturer cage codes. Additionally, the use of class I ozone depleting chemicals is strictly prohibited.
Industrial Valve Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNET
Solicitation # SPE7M1-26-U-5490
Solicitation SPE7M1-26-U-5490, issued by the Department of Defense Maritime Supply Chain, seeks the procurement of 26 electromagnetic relays under NSN 5945-00-552-6518. This requirement is structured as a one-year unilateral indefinite delivery contract/indefinite quantity arrangement with a delivery timeline of 54 days after order. The procurement falls under NAICS code 335314 and is managed by the DLA Land and Maritime office. The contract is subject to several technical and quality mandates, including DLA packaging requirements and the removal of government identification from non-accepted supplies. It strictly prohibits the use of Class I ozone-depleting chemicals, requiring any substitutes to be submitted for approval. Additionally, the contract incorporates configuration change management protocols and requires the provision of complete data packages for any alternate parts. Responses to this solicitation were due by September 3, 2026.
Relay and Industrial Control Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332919
New
DIBBS
BUSHING, BOSS
Solicitation # SPE7M1-26-T-326V
This contract is for the procurement of three boss bushings under solicitation number SPE7M1-26-T-326V for the Department of Defense Maritime Supply Chain. The required items are identified by NSN 4730-01-617-2730 and part numbers 0679B0162C036A and PL-999F0933, manufactured by Circor Naval Solutions LLC. These are designated as critical application items and must be delivered to DLA Distribution San Joaquin in Tracy, California, within 84 days. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific packaging standards per ASTM D3951 and MIL-STD-129. It explicitly prohibits the use of Class I ozone-depleting chemicals and requires a certificate of conformance per FAR 52.246-15. Delivery is set as FOB Origin with inspection and acceptance occurring at the destination, with a required delivery date of July 10, 2025.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333998
New
DIBBS
FILTER ELEMENT, FLUID
Solicitation # SPE7M1-26-T-326L
This contract is for the procurement of two fluid filter elements, identified by NSN 4330012669726 and part number P611-1150 from Devlieg Bullard II Inc. The order is managed under solicitation SPE7M1-26-T-326L by the Department of Defense Maritime Supply Chain, with a required delivery date of September 1, 2026, and a delivery window of 20 days. The items are to be delivered FOB Origin to the AWCF SSA at Fort Bragg, North Carolina. Packaging must comply with ASTM D3951 and MIL-STD-129, while adhering to DLA packaging requirements RP001. Technical and quality standards are governed by the DLA Master List, and the contract specifies that shipment must be made via the fastest traceable means, explicitly prohibiting the use of parcel post.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332321
New
DIBBS
WINDOW, MARINE
Solicitation # SPE7M1-26-T-326Y
This contract is for the procurement of three marine windows, identified by NSN 2090-01-434-3666 and part number 6981359-008 from Cornell-Carr Co., Inc. The acquisition is a Women-Owned Small Business Set-Aside under the Department of Defense Maritime Supply Chain. Delivery is required within 216 days, with a specified need date of October 29, 2024, and an original required delivery date of February 17, 2025. The items are to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. The contract specifies that this is a restricted source item requiring engineering source approval from the government design control activity. It is designated as a critical application item and mandates strict compliance with environmental regulations, prohibiting the intentional addition of mercury or Class I ozone-depleting chemicals. Additionally, the contractor must adhere to CMMC Level 2 self-assessment requirements and follow specific military packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129, to ensure the safe transport of fragile goods.
Metal Window and Door Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333618
New
DIBBS
VALVE, REGULATING, SYSTE
Solicitation # SPE7M1-26-U-5469
Contract SPE7M1-26-U-5469 is a solicitation issued by the Department of Defense Maritime Supply Chain for the procurement of ten system pressure regulating valves, identified by NSN 4820015985081 and Daimler Truck North America part number RDH RD5 9513 0. This is a total small business set-aside under NAICS code 333618 and may result in a one-year unilateral indefinite delivery contract below the Simplified Acquisition Threshold. The delivery timeframe is specified as 101 days after receipt of order, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The contract mandates strict adherence to technical and quality requirements as defined in the DLA Master List, specifically referencing RP001 for packaging and palletization. Packaging must comply with ASTM D3951 and marking and labeling must follow MIL-STD-129. Additionally, the contract requires the removal of government identification from any non-accepted supplies per requirement RQ011. The estimated quantity of ten units is subject to purchase by the IDC, and the procurement is managed under purchase request 1000240296.
Other Engine Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 5 days
View Details
NAICS: 333996
New
DIBBS
PARTS KIT, ROTARY PU
Solicitation # SPE7M1-26-T-296S
This contract is for the procurement of 13 rotary pump parts kits, identified by NSN 4320013675484 and associated with Rix Industries part numbers 204-739 and B5474. The order is designated as a critical application item and must adhere to strict environmental standards, specifically prohibiting the intentional addition of mercury or mercury-containing compounds except where functionally required and specified by NAVSEA. The delivery is set for FOB Origin with a required delivery date of March 28, 2027, and a shipping window of 168 days. All items must be packaged and marked according to MIL-STD-2073-1E and MIL-STD-129, with palletization following DLA packaging requirements. Final inspection and acceptance will occur at the destination, which is the DLA Distribution DDSP New Cumberland facility in Pennsylvania.
Fluid Power Pump and Motor Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 5 days
View Details