Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Transmission Control Assembly Manufacturing

Active

Federal

Response Deadline08/20/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the manufacture of transmission control assemblies in strict adherence to military specifications and source-controlled drawings, ensuring full compliance with defense standards for performance, durability, and reliability. The scope encompasses end-to-end production activities, including rigorous quality assurance protocols, thorough testing procedures, and the preparation of defense-ready documentation required for military acceptance and traceability. All work must be executed under a Total Small Business Set-Aside designation, reserved exclusively for small businesses as defined by the Small Business Administration, with the NAICS code 336350 indicating classification under the motor vehicle parts manufacturing sector. The contract is structured as a subcontract and is issued by the Strategic Acquisition Program Directorate under the Department of Defense, with a response deadline of August 20, 2026, and a posting date of August 5, 2026. There is no specified place of performance or point of contact listed, and the solicitation is accessible via the DIBBS portal for interested parties to review full requirements.

General Info

Small business subcontract to manufacture military-spec transmission assemblies by August 20, 2026, under NAICS 336350.

Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATEView Agency

NAICS

336350 - Motor Vehicle Transmission and Power Train Parts ManufacturingView NAICS

Place of Performance

US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 5

subcontract

Response DeadlineAug 20

Submission deadline

Response Deadline

08/20/2026, 05:00:00 PM UTCin 13 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture of transmission control assemblies per military specifications and source-controlled drawings, including quality assurance, testing, and defense-ready documentation.

Similar Contracts

Same NAICS industry code

25--CONTROL ASSEMBLY,TRANS

Solicitation # SPE7L426T6061

The contract solicitation seeks the procurement of 36 CONTROL ASSEMBLY, TRANS units under NSN 2520014591944, with delivery required to W1A8 DLA DISTRIBUTION within 63 days after order award. This is a source-controlled item with an approved source designated as 73342 29538371, and all delivered items must strictly conform to the specified drawing requirements. The solicitation, identified as SPE7L406T6061, is issued as a Request for Quote and is available exclusively online through the provided digital portal; no hard copies are offered. Digitized technical documentation including drawings and military specifications may be accessed electronically. The opportunity is set aside entirely for small businesses under the SBA program, with the NAICS code 336350 indicating the industry classification. Quotes must be submitted electronically before the deadline of August 17, 2026, and only timely responses from responsible sources will be considered. The contracting office is the DLA Land and Maritime, located in Columbus, Ohio, with primary inquiries directed to the buyer via email as specified in the solicitation document.

DLA Land And Maritime

POSTED

DEADLINE

25--DRIVE SHAFT ASSEMBLY,C

Solicitation # SPE7L326T155E

The contract is for the procurement of a DRIVE SHAFT ASSEMBLY,C under NSN 2520014745707 with a total requirement of 17 units, to be delivered to DLA DISTRIBUTION ALBANY within 18 days after award. The approved source for this item is identified as 6KED7 10237284. This solicitation is issued as a combined RFQ under solicitation number SPE7L326T155E with a Small Business Set Aside designation, meaning only small businesses are eligible to respond. The North American Industry Classification System code is 336350, indicating the procurement relates to transportation equipment manufacturing. Quotes must be submitted electronically through the designated online portal and hard copies are not accepted. No specifications, plans, or drawings are available to offerors. The solicitation was posted on August 6, 2026, with a response deadline of August 17, 2026. All responsible small business sources may submit a quote if received on time. The contracting office is located in Columbus, Ohio, under the Department of Defense's DLA Land and Maritime, with inquiries to be directed via email to the point of contact listed in the solicitation document.

DLA Land And Maritime

POSTED

DEADLINE

25--PARTS KIT,FRICTION

Solicitation # SPE7L126T930H

The solicitation seeks 18 units of NSN 2520015831319, PARTS KIT, FRICTION, to be delivered to DLA Dist San Joaquin with a delivery timeline of 168 days after delivery order issuance. The only approved source for this item is 75182, PTO0475-317-000, and no specifications, plans, or drawings are available. All responsible suppliers may submit quotes electronically via the referenced solicitation link; hard copies are not provided. The solicitation number is SPE7L126T930H, posted on August 6, 2026, with responses due by August 17, 2026. It falls under NAICS code 336350 and is managed by the DLA Land and Maritime office in Columbus, Ohio. Questions must be directed via email to DibbsBSM@dla.mil, with further details accessible through the SAM.gov workspace or the DIBBS website using the solicitation number.

DLA Land And Maritime

POSTED

DEADLINE

25--HUB,CANTILEVER MOUN

Solicitation # SPE7L326U0673

The solicitation seeks quotes for 56 units of NSN 2530004704139 HUB, CANTILEVER MOUN under contract SPE7L326U0673, with a delivery requirement of 0075 days after order placement. This procurement may lead to an Automated Indefinite Delivery Contract with a one-year term or until aggregate orders reach $350,000, whichever comes first, with an estimated two orders per year and a guaranteed minimum of eight units. Items will be shipped to multiple DLA depots across CONUS and OCONUS via consolidated containerization points. The only approved source is 52793 6404M, and quotations must be submitted electronically; hard copies are not available. No specifications, plans, or drawings are provided. The solicitation is open to all responsible sources and closed on August 21, 2026, with response submissions handled through the SAM.gov portal. The contract is administered by the DLA Land and Maritime office in Columbus, Ohio, and inquiries should be directed via email to the designated point of contact listed in the solicitation document.

DLA Land And Maritime

POSTED

DEADLINE

Power, Takeoff, Trans

Solicitation # SPRDL1-26-R-0050

This solicitation, numbered SPRDL1-26-R-0050, is for a five-year long-term contract to procure Power Takeoff, Trans items under NSN 2520-01-661-8744 and manufacturer part number 12577813, with a minimum order of four units and a maximum of 138 units per delivery order. The contract is issued by the DLA Land Warren under the Department of Defense and is classified under NAICS code 336350. FOB terms are destination, with all deliveries required to be shipped to the XR Wolf Anniston Munitions Center unless otherwise directed, and contractors must coordinate with the Contract Specialist if the delivery location is unknown at the time of order. The Technical Data Package (TDP), which governs specifications and includes source-controlled components, is restricted to Data Custodians certified under the United States/Canada Joint Certification Program, and access is granted only through the Contract Opportunities section of SAM.gov after approval. The contract requires compliance with MIL-STD-2073-1 for preservation and packing at Level A, and MIL-STD-129 Revision R for marking, including barcoding and Military Shipment Labels, with all identification following MIL-STD-130 for unique item identification and machine readability. Passive RFID tagging is mandatory if applicable DFARS clauses are present, and pallets must be 40x48 inch, 4-way entry, with loads designed for safe handling. First Article Approval is required unless waived, with submission of a comprehensive First Article Test Report including technical data, illustrations, and photographic evidence to validate compliance with all drawing, specification, and quality assurance plan characteristics. Pricing follows a firm fixed-price structure with CLINs structured by ordering year—0011 through 0015 for the five years of the contract, and 0016 for the First Article Test services—and evaluation will be based on the lowest price, with adjustments applied if a First Article Test waiver is requested and granted. Offers must be submitted electronically via email to the Contracting Specialist by June 15, 2026, in the specified format, with cost data in Excel and other materials in PDF. Contractors must have current representations and certifications in SAM.gov, including those related to Buy American, trade agreements, foreign ownership, and covered defense telecommunications equipment. Quality assurance requires ISO 9001:201

DLA Land Warren

POSTED

DEADLINE

NSNs 2520-01-423-5120 & 2520-01-413-0080, PROPELLER SHAFT WITH UNIVERSAL JOINT, VEHICULAR

Solicitation # SPE7LX-26-R-0074

The U.S. Defense Logistics Agency Weapons Support in Columbus, Ohio, is preparing to issue Solicitation SPE7LX-26-R-0074 under Federal Acquisition Regulation Part 15 to establish a five-year Firm-Fixed-Price Indefinite Quantity Contract for long-term production planning of two specific vehicular propeller shafts with universal joints, identified by NSNs 2520-01-423-5120 and 2520-01-413-0080. The acquisition will be conducted as Other than Full and Open Competition under FAR 6.3, and award will be made on a Best Value basis, where price is important but not decisive; evaluation will also consider past performance, proposed delivery schedules, and other criteria outlined in the solicitation. The contract will support DLA Direct (Stock) requirements with an estimated annual demand of 648 units for the first NSN and 282 units for the second, both falling under NAICS code 336350 and Federal Supply Class 2520. Delivery is required FOB origin with first destination transportation applying, and lead times are set at 170 days after receipt of order for the first item and 185 days for the second. Inspections and acceptance are managed at the source, and no shipments may be made prior to the issuance of a delivery order via DD Form 1155. The acquisition is subject to Trade Agreements requirements under DFARS 252.225-7021, and all offerors must comply. Solicitation documents will be available through DIBBS on or about August 21st, 2026, with proposals due by 4:00 p.m. that same day. While DIBBS is the preferred submission method, electronic submissions via email to Mia Proskurenko and completed SF-1449 forms in PDF format are also accepted. This notice does not obligate the Government, which retains the right to cancel the acquisition at any time.

DLA Land And Maritime

POSTED

DEADLINE

Manufacture and Supply of Vehicular Universal Joints

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Hydraulic Transmission Supply (Commercial Off-The-Shelf Item)Two units of a hydraulic transmission with NSN 2520015028809 are being procured for vehicular applications under a subcontract tied to military specifications and commercial off-the-shelf delivery standards. The item is classified under NAICS code 336350 and must meet all relevant defense requirements for performance, quality, and compatibility with military systems. The solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026, and places of performance are designated for New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The contracting authority is the Department of Defense through its Land Supplier Operations Engines office, and the procurement is conducted under a commercial item framework to ensure timely delivery and cost efficiency while maintaining military-grade reliability.

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Solicitation # SPE7L1-26-T-918C

The contract solicitation SPE7L1-26-T-918C seeks 24 units of PIN, SLIDER with NSN 2520-01-361-8580, valued at $576.00, with delivery required within five days of order placement at the 2nd Supply Depot in Busan, South Korea, though inspection and acceptance occur at the supplier’s origin. The procurement is governed by DLA packaging and marking standards, including MIL-STD-2073-1E for packaging and preservation, and MIL-STD-129 for labeling and barcoding, with preservation method 41 requiring cleaning and drying without preservation materials. Hazard warning labels must comply with 29 CFR 1910.1200 and DFARS 252.223-7001, and technical data associated with the item is subject to export controls under ITAR or EAR, limiting access to contractors certified under the US/Canada Joint Certification Program, trained in DLA export-controlled data handling, and approved by DLA authorities. The contractor must implement CMMC Level 2 cybersecurity controls and safeguard covered defense information per DFARS 252.204-7012, while prohibited from acquiring covered telecommunications equipment or services from designated foreign entities. The contract mandates compliance with FAR and DFARS clauses, including employment eligibility verification, combating trafficking in persons, sustainable products, and automated payment systems via WAWF, with payments processed through the Local Processing Office using DoDAAC codes specified in the award document. Offerors must provide their UEI and CAGE code if involved in defense telecommunications, certify small business status and socioeconomic categories such as HUBZone, 8(a), or WOSB to qualify for price evaluation preferences, and validate all representations in SAM. The solicitation is closed to electronic submissions via DIBBS by August 17, 2026, and does not specify a contract type or formal evaluation weighting, though award is expected to favor price-competitive bids from eligible small businesses. All technical and quality requirements are referenced through the DLA Master List, and no formal attachments or detailed inspection criteria beyond referenced standards are included.

LAND SUPPLY CHAIN

POSTED

DEADLINE

UNIVERSAL JOINT, VEHICU

Solicitation # SPE7L3-26-T-148T

The contract is for the procurement of 18 vehicular universal joints conforming to MIL-DTL-20625C specification and associated technical data packages referenced by revision levels and part numbers, with a total contract value of $324.000 at $18.000 per unit. Delivery is required within 71 days after the issuance of an actual delivery order, with FOB origin terms, meaning risk and responsibility transfer upon delivery to the carrier at the contractor’s location. Final inspection and acceptance occur at the destination, specifically the DLA Distribution Facility in New Cumberland, Pennsylvania. Packaging must comply strictly with MIL-STD-2073-1E and DLA Packaging Requirements for Procurement, with military-grade preservation methods, prohibited use of mercury or mercury compounds, and mandatory marking per MIL-STD-129 including Data Matrix and UCC/UPC barcodes. A prototype package must be submitted and validated against the SPI number 10953657 Revision C. Sampling for quality verification follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless specified otherwise, and attributes are assigned verification levels of VII, IV, and II for critical, major, and minor characteristics respectively. The product must not contain Class I ozone-depleting chemicals, and any substitute chemicals require prior approval. The contractor is required to comply with CMMC Level 2 self-assessment for safeguarding covered defense information and adhere to NIST SP 800-171 requirements under a deviation. Cybersecurity protections are enforced via FAR Clause 252.204-7012, and the contractor must also comply with prohibitions on hexavalent chromium, hazardous materials labeling per OSHA and MIL-STD-129, and exclusion of Communist Chinese Military Companies from supply chains. Quality assurance provisions include tailored higher-level requirements, formal configuration change management through engineering change proposals or variance requests, and reliance on SAE AS9003 or ISO 9001 tailored to AS9003 for the manufacturer’s inspection system. Invoicing must be submitted through Wide Area WorkFlow with no alternative invoicing methods authorized. The contract is awarded under full and open competition with no set-aside designation, and all offerors must provide a UEI and CAGE code while representing their small business status if applicable. Contract administration is governed by clauses covering employment eligibility

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

BOOT, POWER TRANSMISSIO

Solicitation # SPE7LX-26-U-9293

The contract is for the procurement of 500 kits of BOOT, POWER TRANSMISSION COMPONENTS, identified by NSN 2520-01-474-5708, under an Indefinite Delivery Contract (IDC) issued by the Strategic Acquisition Program Directorate of the Department of Defense. The solicitation number is SPE7LX-26-U-9293, with a response deadline of August 20, 2026, and a delivery requirement of 139 days after order placement. All items must be delivered FOB Origin with no quantity variance allowed, and inspection and acceptance occur at the destination. Each kit must include a detailed parts list with part names, numbers, and quantities, and must be packaged and preserved in strict accordance with MIL-STD-2073-1E Appendix D for kits, ensuring the highest applicable preservation method is applied to prevent corrosion or damage, especially to the most critical component. All loose hardware must be sealed within individual containers and cannot be shipped in bulk to avoid additional sorting by the Government. Packaging must adhere to RP001 DLA Packaging Requirements and marking must follow MIL-STD-129, including mandatory barcoding and the special marking code "OPEN THIS SIDE." The unit of issue is "KT" (kit), and the contract maximum value is capped at $350,000.00. Mercury and mercury-containing compounds are strictly prohibited except in specified functional applications such as batteries, fluorescent lights, sensors, controls, weapon systems, and chemical reagents approved by NAVSEA, with portable devices required to have a secondary containment barrier per NAVSEA 5100-003D. Class I ozone-depleting chemicals are banned from inclusion in any supplied items. Hazardous materials must be labeled per OSHA Hazard Communication Standard and FDA regulations, with advance notification of radioactive materials required, and transportation by sea is restricted to U.S.-flagged vessels unless a waiver is granted. All items are classified as commercial items. The contractor must comply with FAR and DFARS clauses addressing equal opportunity, trafficking in persons, employment eligibility verification, sustainable products, cybersecurity safeguards, safeguarding covered defense information, NIST SP 800-171, cyber incident reporting, and subcontracting for commercial products. The contract requires a Unique Entity Identifier (UEI) and CAGE code, and all offerors must provide size status and socioeconomic certifications where applicable. In

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

TRANSMISSION, DRESSE

Solicitation # SPE7L5-26-T-4766

This contract solicits two units of a transmission assembly, identified by NSN 2520-01-502-8809 and part number 3465399, under solicitation SPE7L5-26-T-4766, issued by the Defense Logistics Agency. Delivery is required within 56 days to the DLA Distribution facility in New Cumberland, Pennsylvania, on or before October 13, 2026, with FOB origin terms and no variance permitted in quantity. The item must comply with DLA packaging requirements as outlined in RP001 and MIL-STD-2073-1E, including specific preservation methods using code ZZ to prevent corrosion on all bare metal surfaces and proper lubrication of moving parts. Items must be individually packaged, with cushioning and blocking materials selected by the contractor to meet performance standards, ensuring no movement during transit. Marking must adhere to MIL-STD-129 with the special code ZZ indicating “Arrow Up – Open This Side – Mechanical Handling Required.” The transmission is subject to a restricted technical data license from Oshkosh Defense, LLC requiring non-disclosure and data destruction protocols, and the use of Class I ozone-depleting chemicals is strictly prohibited. The contract incorporates technical and quality requirements referenced from the DLA Master List, with revisions controlled by the solicitation issue date. The unit of issue is each (EA), priced at $2.00 per unit, totaling $4.00. Inspection and acceptance occur at destination, and all packaging must include protective preservation unless prohibited due to potential damage, difficulty of removal, or incompatibility with operational fluids. The delivery address and shipping instructions are identical, and transportation details are governed by DLA Procurement Notes C19 and C20. The solicitation is classified under NAICS code 336350, managed by the Department of Defense’s Land Supplier Ops Engines office, with Bradley Evans listed as the primary point of contact. Contractors must complete and submit the required forms via the DLA TDMT portal to comply with Oshkosh Defense’s licensing terms.

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

More opportunities from Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

Same awarding agency

Quality Inspection and Compliance VerificationThe contract requires the execution of pre-shipment quality inspections to confirm full compliance with specified contractual requirements, focusing on parts accuracy, packaging integrity, preservation methods, labeling correctness, and accompanying documentation. These inspections must be conducted in accordance with FAR 52.246-2 to ensure all delivered items meet the defined standards before shipment. The work is classified as a subcontract under NAICS code 541330, which pertains to engineering services, and is managed by the Strategic Acquisition Program Directorate within the Department of Defense. The solicitation was posted on August 5, 2026, with a response deadline of August 20, 2026, and is accessible via the DIBBS portal under reference number SPE7LX26U9293. Performance of the work is not restricted to a specific location, and no set-aside provisions are indicated.

Engineering Services

POSTED

DEADLINE

Transportation and Shipping Logistics (Sea & Land)The contract requires the arrangement and management of shipping logistics for kits via both land and sea transportation, with strict adherence to regulations mandating the use of U.S.-flagged vessels under DFARS 252.247-7023 unless an explicit waiver is granted. All shipments must comply with MIL-STD-129 marking standards to ensure proper identification, labeling, and handling throughout the transport chain. The work involves end-to-end coordination of domestic and international freight, including scheduling, documentation, carrier selection, and compliance monitoring to meet military shipping protocols. This is a subcontract under the Strategic Acquisition Program Directorate of the Department of Defense, classified under NAICS code 488510 for support activities for animal transportation. The solicitation was posted on August 5, 2026, with a response deadline of August 20, 2026, and performance is expected to occur across unspecified locations, as no precise place of performance is provided. Bidders must respond through the DIBBS platform using the provided reference number, and all offerings must demonstrate proven capability in handling secure, regulated military shipments while maintaining full compliance with federal acquisition and defense logistics standards.

Freight Transportation Arrangement

POSTED

DEADLINE

Hazardous Materials Compliance and LabelingThe contract requires strict adherence to hazardous materials regulations by ensuring that all non-exempt hazardous components within the kit are properly identified and documented. This includes the preparation and timely submission of accurate hazard warning labels and Material Safety Data Sheets (MSDS) to communicate risks and handling procedures to end users and regulatory bodies. Failure to comply with these requirements could result in regulatory violations and operational delays, making precise and thorough documentation a critical component of performance. The contract is classified as a subcontract under NAICS code 541690 and is issued by the Department of Defense’s Strategic Acquisition Program Directorate. It was posted on August 5, 2026, with a response deadline of August 20, 2026, indicating a tight turnaround for proposals. While no specific place of performance or point of contact is provided, the obligations center on regulatory compliance for hazardous materials regardless of location, and all deliverables must meet federal standards for safety documentation and labeling.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Industrial Packaging and Preservation ServicesThe contract requires the provision of military-grade packaging, preservation, and labeling services for power transmission parts kits to ensure complete protection against corrosion and physical damage throughout storage and transit. All work must strictly adhere to MIL-STD-2073-1E standards, with particular emphasis on safeguarding the most sensitive component within each kit, ensuring operational readiness and integrity. The packaging solutions must be robust, environmentally controlled, and fully compliant with Department of Defense specifications to meet rigorous military supply chain demands. This is a subcontract opportunity issued by the Strategic Acq Program Directorate under the Department of Defense, with a NAICS code of 323113 indicating specialized packaging services. The solicitation was posted on August 5, 2026, and responses are due by August 20, 2026. While the place of performance and point of contact details are not specified, the work is intended to support defense logistics and must be executed to exacting standards to ensure the reliability of critical power transmission components in high-stakes operational environments.

Commercial Screen Printing

POSTED

DEADLINE

Power Transmission Parts Kit Manufacturing and AssemblyThe contract requires the manufacture and assembly of mechanical components including gears, shafts, bearings, and couplings into a configured power transmission parts kit designated by NSN 2520014745708, complete with a detailed parts list. The work must adhere to precise specifications to ensure full functionality and compatibility within military power transmission systems. The solicitation is issued as a subcontract under NAICS code 336390, which pertains to other transportation equipment manufacturing, and is managed by the Strategic Acquisition Program Directorate under the Department of Defense. The opportunity was posted on August 5, 2026, with a mandatory response deadline of August 20, 2026. Although no specific location for performance or point of contact is provided, the work must be executed to meet the technical and logistical standards expected by the Department of Defense. Interested parties must submit proposals through the designated DIBBS portal prior to the deadline to be considered for award.

Other Motor Vehicle Parts Manufacturing

POSTED

DEADLINE

Small Business Subcontracting & Accelerated Payments AdministrationThe contract supports administrative functions related to compliance with Federal Acquisition Regulation clauses governing accelerated payments to small business subcontractors and the protection of contractor information systems. It is specifically designated as a Women-Owned Small Business Set-Aside, meaning only businesses certified as women-owned small businesses are eligible to compete. The North American Industry Classification System code 541611 identifies the work as management consulting services, indicating the tasks will involve advisory, coordination, and oversight activities rather than direct technical or operational execution. The contracting activity falls under the Strategic Acquisition Program Directorate within the Department of Defense, and the requirement is solicited as a subcontract, implying it supports a larger prime contract’s compliance obligations. Responses are due by August 20, 2026, following a posting date of August 5, 2026, providing a two-week window for submission. The place of performance and official office address are unspecified, suggesting work may be performed remotely or at various locations as needed. The contractor will be responsible for ensuring proper documentation, tracking, and reporting to meet accelerated payment mandates for small business subs and for implementing or verifying safeguards aligned with information system protection standards. No point of contact is listed, so inquiries must be directed through the official DIBBS portal linked in the solicitation.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Sustainable & Environmentally Compliant Packaging SupplyThe contract requires the supply of military-compliant packaging materials that adhere to MIL-STD-2073-1E, DLA RP001, and FAR 23.223 standards, ensuring environmental sustainability and regulatory alignment with Department of Defense protocols. All materials must be ozone-safe and include proper barcoding to meet traceability and logistics requirements, supporting efficient handling and inventory control across military supply chains. The packaging solutions must be designed for durability, functionality, and minimal environmental impact, reflecting a strong emphasis on eco-conscious procurement practices. This is a subcontract under a Women-Owned Small Business Set-Aside, with the NAICS code 561910 indicating it pertains to other support activities for waste management and remediation services, aligned with packaging and logistics support functions. The solicitation was posted on August 5, 2026, and responses are due by August 20, 2026. The procuring entity is the Strategic Acq Program Directorate within the Department of Defense, and the place of performance and point of contact details are not specified. Interested parties must submit proposals through the DIBBS portal using the reference number SPE7LX26U9306.

Packaging and Labeling Services

POSTED

DEADLINE

Hazardous Materials Compliance & Safety LabelingThe contract governs the identification, handling, and labeling of hazardous materials within defense manufacturing and packaging operations, ensuring full adherence to OSHA's Hazard Communication Standard and Defense Logistics Agency requirements. Work must be performed in strict compliance with federal safety regulations to protect personnel, maintain operational integrity, and support defense supply chain readiness. The scope includes accurate material classification, proper signage, safety data sheet management, and labeling protocols aligned with updated regulatory frameworks. This is a subcontract categorized under a Women-Owned Small Business Set-Aside, with the NAICS code 541620 indicating environmental consulting and related services. The solicitation was posted on August 5, 2026, and responses are due by August 20, 2026. The work is performed under the purview of the Strategic Acquisition Program Directorate within the Department of Defense. All activities must align with federal defense contracting standards, and the successful bidder must demonstrate proven expertise in hazardous materials compliance within government-contracted manufacturing environments.

Environmental Consulting Services

POSTED

DEADLINE

Precision Metal Fabrication of Loop ClampsThe contract calls for the manufacture of precision-engineered loop clamps designated as critical application items, requiring strict adherence to SAE AS21919D standards and applicable military specifications. These components demand rigorous configuration control, full traceability throughout production, and compliance with quality assurance protocols suitable for high-reliability defense systems. All manufacturing processes must ensure dimensional accuracy, material integrity, and documented compliance to meet the stringent performance and safety requirements of the end-use environment. This is a subcontract issued under a Women-Owned Small Business Set-Aside, classified under NAICS code 332439, and managed by the Strategic Acquisition Program Directorate within the Department of Defense. The solicitation was posted on August 5, 2026, with a response deadline of August 20, 2026. Performance will occur under the oversight of the contracting office, though specific location details are not provided. Bidders must be certified as a Women-Owned Small Business and capable of delivering fully traceable, conforming hardware that meets the technical, regulatory, and documentation standards for defense-critical components.

Other Metal Container Manufacturing

POSTED

DEADLINE

Cybersecurity Compliance (NIST SP 800-171)The contract requires the implementation and ongoing maintenance of cybersecurity controls to safeguard covered defense information in full alignment with NIST Special Publication 800-171 standards. This includes establishing and enforcing technical, physical, and administrative safeguards to protect sensitive data transmitted, processed, or stored within systems handling defense-related information. The contractor must conduct regular internal self-assessments to evaluate compliance with the required controls and maintain accurate documentation to support continuous monitoring and audit readiness. Support for Department of Defense reporting under DFARS 252.204-7012 is mandatory, ensuring that all compliance status, incident responses, and assessment results are accurately submitted through designated DoD systems. The contract is structured as a subcontract under NAICS code 541512, associated with the Department of Defense’s Strategic Acquisition Program Directorate, with a response deadline of August 20, 2026. All work must be performed to meet federal cybersecurity mandates without exception, and adherence to these requirements is non-negotiable for contract fulfillment.

Computer Systems Design Services

POSTED

DEADLINE

Military Packaging & Labeling ServicesThe contract requires comprehensive packaging, preservation, and labeling services strictly aligned with military and industry standards including MIL-STD-129, MIL-STD-130N, and ASTM D3951, ensuring all items are properly prepared for secure transportation and inventory management within the Department of Defense supply chain. Key deliverables include the accurate application of Data Matrix barcodes, full serialization of individual units and containers, and proper palletization in accordance with RP001 guidelines to maintain traceability, combat readiness, and logistical efficiency. All work must adhere to rigorous government specifications for durability, legibility, and compliance, with no deviations permitted. This subcontract opportunity is issued by the Strategic Acquisition Program Directorate under the Department of Defense, with a posted date of August 5, 2026 and a response deadline of August 20, 2026. The NAICS code 561910 reflects its classification under Other Support Activities for Transportation, indicating the service focuses on specialized logistics support rather than general warehousing or shipping. The place of performance and point of contact details are not specified in the available data, but all work must meet the full scope outlined in the referenced standards. Interested parties may access additional details through the provided DIBBS portal link.

Packaging and Labeling Services

POSTED

DEADLINE

Hazardous Materials Compliance & SDS ManagementThe contract requires identification of hazardous components within protective covers, preparation and submission of complete Safety Data Sheets in accordance with regulatory standards, and validation that all labeling complies with OSHA’s Hazard Communication Standard before any delivery occurs. The work is tied to ensuring that material safety information is accurate, accessible, and properly displayed to protect personnel and meet federal compliance requirements. All activities must be completed prior to shipment or handover of the protective covers to ensure full regulatory alignment. This subcontract falls under NAICS code 541620 and is managed by the Department of Defense’s Strategic Acquisition Program Directorate. The solicitation was posted on August 5, 2026, with responses due by August 20, 2026. While specific performance location details are not provided, the requirement centers on compliance with federal hazardous materials communication protocols, and the work is intended to support defense-related procurement activities through rigorous safety documentation and labeling processes.

Environmental Consulting Services

POSTED

DEADLINE