Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

TRANSMITTER, PRESSUR

Active
SPE4A7-26-T-569UFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 21 units of a pressure transmitter with NSN 6685-01-290-5189 under solicitation SPE4A7-26-T-569U, issued as a total small business set-aside under NAICS code 332510. Delivery is required within 171 days of award, with the solicitation closing on July 22, 2026, and posted on July 14, 2026. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the version in effect on the solicitation issue date controlling for this simplified acquisition. Packaging, configuration change management, removal of government identification from non-accepted supplies, and export control of technical data are all governed by specific DLA requirements. Technical data associated with this item is subject to export controls under either ITAR or EAR, restricting disclosure to foreign persons regardless of location and requiring prior authorization from the Department of State or Commerce. Access to this controlled data is limited to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled data, and have been formally approved by DLA. The place of performance is BREMERTON, WA 98314-6001, with Lacresha Ellis as the primary point of contact via email and phone.

General Info

Procure 21 pressure transmitters under small business set-aside, delivery in 171 days, export-controlled data, Bremerton, WA performance.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

BLDG 467, BREMERTON, WA, 98314-6001, US

Set-Aside

SBA

Documents

(1)

RFQ SPE4A7-26-T-569U DLA Aviation Jul 15 2026

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
Lacresha Ellis
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
TRANSMITTER,PRESSUR
TRANSMITTER,PRESSURE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 6685-01-290-5189 Quantity: 21 EA Purchase Request: 7017486675QTY: 21 Delivery: 171 days ADO

Similar Contracts

NAICS: 332510
New
DIBBS
PLUNGER, DETENTThe contract pertains to the procurement of 12 units of a PLUNGER, DETENT with NSN/Part Number 5340-01-487-6789, with a delivery requirement of 140 days after order. The solicitation, identified as SPE7L1-26-R-0107, was posted on July 15, 2026, and responses are due by August 14, 2026, under the Department of Defense’s Land Supply Chain. The item is subject to cybersecurity compliance under the Cybersecurity Maturity Model Certification (CMMC) Level 2, requiring the vendor to be a certified third-party assessment organization. Technical and quality requirements referenced by R or I numbers must adhere to the DLA Master List, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed. Technical data associated with this item is controlled under ITAR or EAR, restricting exportation—including disclosure to foreign nationals—without prior authorization from the Department of State or Commerce, and DFARS 252.225-7048 applies. Access to export-controlled data is limited to contractors with approved US/Canada Joint Certification Program status, completion of required DOD export control training, and validation through the DLA questionnaire.
LAND SUPPLY CHAIN

POSTED

in about 10 hours

DEADLINE

in about 1 month
View Details
NAICS: 332510
New
DIBBS
RIVET, BLINDThe contract pertains to the procurement of 988 individual blind rivets, identified by NSN 5320-01-150-2755 and part number NAS9308M-6-09, manufactured in compliance with revision 5 of the non-government standard NAS9308 dated 08/31/2015, and packaged according to MIL-STD-2073-1E with specific packaging codes and methods. The item is classified as a commercial item of a type, and hardware manufactured to any prior revision of the standard that was current at the time of production remains acceptable, though all units supplied after the solicitation date must conform to the current revision. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stipulated, and attributes are deemed critical, major, or minor with corresponding verification levels and AQLs. Physical identification and marking must adhere to MIL-STD-129, with no special marking required, and packaging must meet DLA’s overall procurement requirements including palletization and unit containment. Delivery is FOB origin with zero tolerance for quantity variance, and acceptance occurs at the point of origin. The required delivery date is 169 days from award, with an original due date of January 19, 2027 and a need ship date of November 29, 2026. The contract references multiple DLA quality and inspection requirements including RQ001, RQ009, RQ011, RQ017, and RP001, all tied to the DLA Master List of Technical and Quality Requirements. Transportation and shipping instructions follow DLAD procedural notes C19 and C20, and the goods must be delivered to the designated receiving warehouse at 25600 S Chrismann Road, Tracy, CA 95304-5000. The sole point of contact for the contract is Ahoefa Simons De Fanti, and the solicitation was issued on July 14, 2026 with a response deadline of July 17, 2026 under solicitation number SPE4A6-26-T-80W7, classified under NAICS code 332510.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332510
New
DIBBS
PIN, STRAIGHT, HEADEDThe contract specifies the procurement of straight-headed pins designated as MS20392-2C51, manufactured to the current revision of the non-government standard NASM20392 and referenced in NASM5673, with material requirements replacing MIL-S-6050 with SAE AMS6280 for 8630 steels. The item is classified as a critical application and must comply with MIL-STD-130 for part marking using SAE AS478 procedures, with no unique item identification required per the service customer’s direction. All hardware must meet the latest applicable version of the governing standard, with prior revisions accepted only if they were current at the time of manufacture. Inspection and acceptance occur at the point of origin using zero-defect sampling under MIL-STD-1916 or an equivalent zero-based plan, with unspecified attributes treated as major and verification levels assigned accordingly. Packaging must adhere to MIL-STD-2073-1E and DLA’s packaging requirements, with marking conforming to MIL-STD-129 and no special marking applied. Mercury or mercury compounds are prohibited in all preservation, packaging, and marking processes. Palletization follows DLA standards, and each unit is individually contained with specified cushioning and wrapping parameters. The contract includes two line items: 87 units destined for San Diego with a need ship date of March 25, 2028, and 506 units for Jacksonville with a need ship date of July 15, 2026, both with a 64-day delivery timeline and a total order quantity of 593 units. Pricing is fixed at $87.00 and $506.00 per unit respectively, with no variance allowed in quantity and delivery terms set FOB origin. The solicitation number is SPE4A6-26-T-05UM, issued by the Department of Defense’s ASC Commodities Division under NAICS code 332510, with the response deadline on July 22, 2026.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
RIVET, BLINDThis contract is for the procurement of 874 units of blind rivets identified by NSN 5320-01-340-6777 and part number NAS1750-3DL9, manufactured to the current revision of the non-government standard NAS1750 Revision 6 dated 11/29/2019 and referenced alongside NAS1675 Revision 7 dated 07/31/2025. The item is classified as a commercial item and a critical application item requiring strict adherence to physical marking and identification standards per RQ017. All manufacturing must comply with the latest revision of the applicable standard, and prior versions are no longer acceptable for production from the solicitation date forward. The contract enforces the DLA Master List of Technical and Quality Requirements, which override all other specifications including ASTM D3951, and mandates packaging in accordance with MIL-STD-129 and DLA Packaging Requirements RP001, with palletization governed by the same guidelines. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stipulated, and attributes are to be classified with specific verification levels or AQLs. Delivery is set for FOB origin with a 159-day delivery window, with the required ship date of December 29, 2026, and original delivery due by March 15, 2027. Inspection and acceptance occur at destination, with no variance allowed in quantity—strictly 874 units. Packaging must be labeled and marked per MIL-STD-129 and the specified QUP of 025, with unit of issue as EA. The contract includes tailored quality requirements applicable to both manufacturers and non-manufacturers, and transportation logistics must follow DLAD Proc Notes C19 and C20. The delivery destination is specified as DLA Distribution San Joaquin in Tracy, CA, with Debra Fowler identified as the primary point of contact. The purchase request number is 7017487165, and the contract number is SPE4A6-26-T-05XN, issued under NAICS code 332510 by the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
Precision Shaft Coupling ManufacturingThe contract calls for the manufacture and delivery of 35 rigid shaft couplings identified by NSN 3010-01-679-7883, requiring strict adherence to military specifications covering material traceability, dimensional accuracy, and mechanical performance. These components are critical for high-integrity mechanical systems and must be produced under controlled conditions to ensure reliability and conformance under operational stresses. The work falls under NAICS code 332510, indicating it involves the fabrication of industrial machinery and equipment components, and is structured as a subcontract within the Department of Defense procurement framework managed by the Defense Logistics Agency. The solicitation was posted on July 14, 2026, and is associated with contract number SPE7L326P4863. There is no designated set-aside classification, suggesting the opportunity is open to all qualified suppliers regardless of business size or status. The place of performance and point of contact details are not specified, implying that fulfillment may occur at the contractor’s facility, subject to DLA’s oversight and quality assurance protocols. Performance must align with the technical and documentation standards required for military-grade hardware, ensuring full traceability and certification throughout the production lifecycle.
Defense Logistics Agency

POSTED

about 14 hours ago

DEADLINE

N/A
View Details