Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

TRAP, GREASE

Active
SPE8E8-26-T-5048Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of TRAP, GREASE with the NSN 4510-01-541-2489, quantity of seven units, under purchase request 7017757800. Delivery is required within 97 days of award, and the solicitation number is SPE8E8-26-T-5048, issued on August 5, 2026, with responses due by August 17, 2026. All technical and quality requirements referenced in this solicitation are governed by the DLA Master List of Technical and Quality Requirements, accessible via the official DLA website, and the applicable revision is determined by the solicitation issuance or award date depending on the acquisition size. Packaging must conform to DLA packaging requirements, and any non-accepted supplies must have government identification removed prior to return. The procurement is managed by the DDSP New Cumberland Facility under the Department of Defense, with performance location in New Cumberland, Pennsylvania, ZIP 17070-5002. Primary point of contact is Alexis Selby, reachable by phone at 312-444-8487 or email at alexis.selby@dla.mil. The NAICS code is 332919, indicating the industrial classification for this procurement, and the contract type is classified as a federal solicitation with no set-aside designation.

General Info

Procurement of seven TRAP GREASE units under solicitation SPE8E8-26-T-5048, delivery in 97 days, DLA requirements, New Cumberland, PA.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

332919 - Other Metal Valve and Pipe Fitting ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE8E8-26-T-5048.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DDSP NEW CUMBERLAND FACILITY
View Agency Profile
Office AddressUS
Contacts
Alexis Selby
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
TRAP,GREASE
TRAP,GREASE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
(0U5N7) 48041024-2
ADEQUATE DATA FOR NSN/Part Number: 4510-01-541-2489 Quantity: 7 EA Purchase Request: 7017757800QTY: 7 Delivery: 97 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332919
New
DIBBS
ELBOW, HOSE
Solicitation # SPE7M0-26-T-031Q
This contract pertains to the procurement of one elbow hose, identified by NSN 4730016175913 and part number FS2702-12-12-FG from Brennan Industries, with a total quantity of one unit. The item is designated as a critical application component, and all materials must strictly comply with DLA’s Master List of Technical and Quality Requirements, which take precedence over any other standards including ASTM D3951 and MIL-STD-129 for packaging and labeling. The use of Class I ozone-depleting chemicals is explicitly prohibited, and any alternative substitutes must be pre-approved unless already authorized under the specifications. Delivery is required within five days of contract award, with FOB origin terms, no variance in quantity allowed, and inspection and acceptance occurring at the destination. Packaging must adhere to DLA’s packaging requirements, including palletization and labeling per MIL-STD-129, with unit of issue and quantity per unit pack exactly as specified. Shipment must be sent via traceable freight methods, excluding parcel post, to the designated delivery point at 547 Philadelphia Avenue, Reading, PA, under RDD/ NMCS shipment directives. The contract number is SPE7M0-26-T-031Q, with a required delivery date of July 15, 2026, and the solicitation was posted on August 5, 2026, with responses due by August 17, 2026. The item falls under NAICS code 332919 and is procured by the Department of Defense through the Maritime Supply Chain ESOc Buys office.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332919
New
DIBBS
STEM, FLUID VALVE
Solicitation # SPE7MC-26-T-168J
The contract is for one STEM, FLUID VALVE with NSN 4820-01-618-3879 and part number 26344-N1-420, issued by the Defense Logistics Agency under solicitation SPE7MC-26-T-168J. The requirement is for a single unit to be delivered FOB origin within 20 days of contract award, with no variance permitted in quantity. Inspection and acceptance occur at the destination, and the item must be packaged in strict compliance with MIL-STD-2073-1E and MIL-STD-129, including specific packaging codes, materials, and marking requirements. The packaging must also adhere to DLA’s standardized procurement packaging guidelines, with no special marking required. The delivery destination is Distribution Management Office, Bldg 401, Camp Kinser, JP, and the shipment is designated as RDD 777 with transportation and freight instructions governed by DLAD procedural notes C19 and C20. The item is designated for government use with an IPD of 05 and DIC A31, with the original required delivery date set for August 3, 2026. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, and the contract is classified under NAICS code 332919. The point of contact for procurement inquiries is Paula McClary, reachable via email and phone provided.
Defense Logistics Agency

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332919
New
DIBBS
PROPORTIONER, FOAM LIQU
Solicitation # SPE8E6-26-T-4059
This contract specifies the procurement of 183 units of a foam liquid proportioner, identified by NSN 4210-01-112-3081, under solicitation SPE8E6-26-T-4059, issued by the Defense Logistics Agency Dist San Joaquin. The item must be manufactured using a metal casting process requiring specialized tooling, and suppliers are directed to contact designated supply chain teams for sourcing or tooling assistance. Strict adherence to DLA packaging requirements and MIL-STD-2073-1E is mandated, with packaging and marking conforming to MIL-STD-129 and no special marking codes applied. The delivery is FOB origin with a 91-day lead time, and inspection and acceptance occur at the destination. The item must be free of intentional mercury or mercury-containing compounds except for specific exempted applications like batteries or sensors, and any portable fluorescent lamps must have shockproof housing with secondary containment as per NAVSEA 5100-003D. The contract is set aside for Women-Owned Small Businesses under NAICS code 332919, and delivery is required to be completed by June 2, 2026, to warehouse code W62G2T in Tracy, California, with transportation governed by DLAD procedural notes C19 and C20.
DLA DIST SAN JOAQUIN

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332919
New
DIBBS
NUT, HOSE COUPLING
Solicitation # SPE7M0-26-T-031P
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332919
New
Federal
FLANGE,4",WN,SCH40
Solicitation # N0010426QED05
This contract pertains to the procurement of a 4-inch weld-neck flange with schedule 40 specifications under solicitation N0010426QED05, issued by the Naval Supply Systems Command Weapon Systems Support Mechanism. The contract mandates strict compliance with technical, quality, and packaging requirements governed by the Individual Repair Part Ordering Data (IRPOD), which takes precedence over other documents in case of conflict, followed by the schedule, terms and conditions, and referenced military specifications. Contractors must adhere to all cited revision levels of drawings and standards, and any deviation or waiver must be formally requested with detailed justification, including evidence that proposed changes will not affect the form, fit, or function of the part. Mercury or mercury-containing compounds are strictly prohibited from contact with supplied hardware. All inspection and test reports must be submitted electronically via Wide Area Workflow (WAWF), and pre-manufacturing procedures, drawings, and qualifying documentation must be submitted within 45 days of contract award to the designated contracting office. Packaging must comply with MIL-PRF-23199, particularly concerning cleanliness control requirements, and the use of MIL-DTL-24466 green poly bags is permitted only under specific conditions outlined in the IRPOD. The contract enforces mandatory cybersecurity maturity model certification, small business representation, and equal opportunity requirements for veterans and workers with disabilities. All contractual documents are considered issued upon electronic transmission, and pricing validity is set at 60 days unless otherwise specified. Technical data, including drawings and specifications, are marked NOFORN and subject to export control with prior approval from the Naval Sea Systems Command for any transmission to foreign nationals. Distribution of deliverables follows strict DoD distribution statement codes, particularly F, restricting release without explicit authorization. Contractors must submit separate packages for each contract line item, including certified reports of test and inspection and pre-manufacturing documentation per DI-QCIC-8871 and DI-QCIC-8872 standards. The place of performance is not specified, and the point of contact for inquiries is listed as a Navy procurement representative. The contract requires compliance with priority rating provisions for national defense and energy programs, and all submissions are governed by detailed formatting and submission guidelines outlined in DD Form 1423 instructions, including data item descriptions, approval codes, and delivery frequencies.
Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332919
New
Federal
PORT ADAPTER TEE
Solicitation # N0010426QEC57
The contract pertains to the procurement of a Port Adapter Tee, identified by part number 6 AOG5JG5-M, manufactured by Parker Hannifin Corp (CAGE 30780), under solicitation N0010426QEC57 with a response deadline of September 4, 2026. The requirement stipulates strict adherence to specified design, material, and dimensional criteria, with no accompanying technical drawings or data beyond the part number, and mandates full compliance with referenced standards including MIL-PRF-23199 packaging specifications and the exclusion of mercury or mercury-containing compounds. The order of precedence for technical conflicts is clearly defined, prioritizing contract amendments and schedule provisions over internal standards and drawings. Contractors must comply with exact document revisions unless approved otherwise and are prohibited from mixing partial revisions; deviations or delays require detailed justification and prior written approval from the Contracting Officer, including evidence that any proposed changes do not compromise form, fit, function, or quality. The contract enforces rigorous quality assurance, requiring the contractor to maintain a government-acceptable inspection system with complete records available throughout performance and beyond. Packaging must conform to MIL-PRF-23199, with specific clarification that MIL-DTL-24466 green poly bags are only permissible when cleanliness controls from specified standards such as MIL-STD-767 or MIL-STD-2041 apply, and fire-retardant materials are no longer required. Compliance reporting mandates submission of a Certificate of Compliance per DI-MISC-81356 with each delivery, tied to the contract number, NSN, and item nomenclature. The procurement is subject to mandatory compliance with cybersecurity maturity model certification, small business representation, veteran and disability equal opportunity provisions, and national defense priority ratings. All contractual documents are deemed issued upon electronic transmission, pricing is valid for 60 days post-closing unless otherwise specified, and use of Wide Area Workflow Payment Instructions and Workflow Pro Assist Module is required. The place of performance is unspecified, but the awarding office is NAVSUP WSS-MECH, located in Mechanicsburg, PA, with Alexander E. Jones listed as the point of contact.
Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332919
New
Federal
ADAPTER,HOSE TO UNI
Solicitation # N0010426QFF67
This contract requires the supply of hose adapters for critical shipboard systems, designated as Special Emphasis Level I material due to the high risk of catastrophic failure if defective components are installed. The items must comply with MIL-F-24787 and associated specifications, including material requirements for QQ-N-281, QQ-N-286, and ASTM-A494, with stringent testing and certification protocols for chemical composition, mechanical properties, ultrasonic inspection, and non-destructive testing. All materials must maintain traceability from raw stock to finished parts through uniquely marked heat-lot numbers, and certification documents must be signed, unqualified, and directly linked to each component. Welding and brazing are subject to strict procedures per S9074 standards, with no repairs permitted on certain high-performance alloys, and all welding procedures require prior government approval. The material must be free of mercury and shipped only after certification data is reviewed and accepted by the Portsmouth Naval Shipyard via WAWF, with delivery scheduled within 365 days and early or incremental shipments allowed without additional cost. Quality assurance is rigorously enforced throughout the supply chain, requiring ISO-9001 and ISO-10012 compliance with calibration standards aligned to ANSI-Z540.3 or MIL-STD-45662. Government inspection is mandatory at the supplier’s facility, and subcontractors must adhere to identical quality controls. All certifications, test reports, and weld data must be submitted electronically through ECDS and WAWF, with specific submission instructions for each shipment. Sampling for acceptance follows zero-defect criteria, and 100% verification of traceability, certifications, and test documentation is required prior to delivery. Waivers and deviations, regardless of scope, require formal approval from the Contracting Officer, and engineering changes affecting form, fit, or function must be submitted as Class I or II ECPs. The contract operates under Emergency Acquisition Flexibilities and enforces Buy American requirements, with materials limited to qualified sources on the approved QPL. Failure to meet any certification, traceability, or documentation requirement will result in rejection of materials, and all deliveries must be preceded by formal government acceptance via WAWF.
Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332919
New
Federal
VALVE,LINEAR,DIRECT
Solicitation # N0010426QYAER
This contract pertains to the procurement of a VALVE, LINEAR, DIRECT under solicitation N0010426QYAER, issued by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania. It is managed through Emergency Acquisition Flexibilities and requires bilateral execution, meaning the award is contingent upon the contractor’s written acceptance prior to binding commitment. The item must conform to specific cage code 78062 and reference number 3191277-3, with mandatory adherence to MIL-STD-130 Rev N for item marking. All components must be sourced from authorized distributors of the original manufacturer, and proof of authorization must be submitted with the offer. The contract includes strict requirements for design changes, allowing substitutions only with prior written approval from the NAVICP-MECH Contracting Officer, categorized under six defined change codes based on interchangeability and impact. Quality assurance is the contractor’s responsibility, requiring full compliance with all specifications regardless of inspection provisions, with records of all inspections to be maintained for 365 days after final delivery. Government source inspection is mandated, and the contractor may use internal or third-party facilities for inspection unless disallowed. Packaging must comply with MIL-STD-2073, and all freight is FOB Origin. The contract incorporates multiple Federal Acquisition Regulation clauses, including Buy American and Free Trade Agreements certifications, Small Business Subcontracting Plan requirements, Security Prohibitions, and provisions for the use of Workflow Pro Assist Module and Wide Area Workflow for invoicing. Distribution of documents and technical data is controlled under seven distribution statement codes, with restrictions limiting access to U.S. government agencies, contractors, or DoD components depending on classification. Responses must be submitted by August 20, 2026, and the NAICS code 332919 applies. The primary point of contact is Alison N. Bruker, reachable via email at alison.n.bruker.civ@us.navy.mil.
Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332919
New
Federal
C.O.R.D.
Solicitation # N0010426RZB58
This contract is for the procurement of a Level I Special Emphasis item, the 12.00 x 6.00 NPS Cascade Orificial Resistive Device (C.O.R.D.), a critical shipboard component whose failure could result in catastrophic consequences including loss of life or the ship itself. The requirement mandates the use of additive manufacturing for specific components, particularly the Body, Piece 43A, produced from MIL-PRF-32804 Grade A feedstock with strict controls including the use of a single heat lot per part, non-integrated build platforms, and mandatory post-processing to achieve surface finishes smoother than 125 Ra. All additive manufactured parts must be subjected to nondestructive testing per S9074-A4-GIB-010/AM-WIRE DED, including dye penetrant inspection, visual inspection, and radiography, with complete traceability from raw material to finished part through unique heat-lot numbers and permanent marking compliant with MIL-STD-792. The contractor must submit a comprehensive Certification Data Package for additive manufacturing procedures and qualification, including DED Procedure and Part Verification Test Reports, Quality Assurance Plans, and Production Conformance Evaluations, all of which require prior Navy approval before any production begins. The contract requires full compliance with ISO-9001 or MIL-I-45208 quality systems, supported by calibration systems meeting ISO-10012 or ANSI-Z540.3 with ISO/IEC 17025, and mandates 100% inspection of all material certifications, nondestructive test reports, and traceability markings. All deliveries must be FOB destination at Portsmouth Naval Shipyard, with final acceptance occurring at that location after Government inspection, and complete certification documentation including Certificates of Compliance, chemical/mechanical test reports, and weld records must be submitted electronically prior to shipment. The contractor is required to maintain configuration control, submit Engineering Change Proposals for any design changes, and ensure all subcontractors adhere to the same stringent quality, traceability, and certification requirements. Payment is mandated through Wide Area Workflow with electronic invoicing, and the contract is classified as a Firm Fixed Price for a total delivery window of 200 days, with partial deliveries encouraged. The solicitation emphasizes past performance as the primary evaluation factor over price, employs a trade-off selection process, and includes mandatory compliance with Buy American Act provisions, prohibitions on mercury usage, and the use of
Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332919
New
Federal
ELBOW
Solicitation # N0010426QED09
Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332919
New
International
F3065-265252 – Sea water valves for CCGS Leim
Solicitation # WS5788821709
Public Works and Government Services Canada, acting on behalf of the Canadian Coast Guard, is soliciting proposals for the supply of 34 seawater valves destined for the Canadian Coast Guard Ship Leim, with delivery required in Quebec, Quebec. The solicitation, identified as WS5788821709 and titled F3065-265252, was posted on July 28, 2026, and responses must be submitted by August 17, 2026, at 7:00 p.m. Eastern Time. The valves are to be delivered in accordance with the detailed specifications outlined in the Annex Statement of Requirement, ensuring compatibility and operational integrity with the vessel’s systems. This procurement is a federal government initiative with no set-aside provisions, managed through the Government of Canada’s procurement framework. Melanie Parent, Contracting Authority with Public Services and Procurement Canada, serves as the primary point of contact for inquiries related to the solicitation, and can be reached at melanie.parent@tpsgc-pwgsc.gc.ca. The contract is being issued under the broader authority of PWGSC to support critical maritime infrastructure needs, reinforcing the operational readiness of the Canadian Coast Guard fleet. Proposals must fully address the technical, delivery, and compliance requirements detailed in the official documentation available on the Canada Buys portal, with selection based on demonstrated capability, adherence to specifications, and cost-effectiveness. Failure to meet the deadline or submission standards will result in automatic disqualification.
Department of Public Works and Government Services

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332919
New
DIBBS
Supply of 3-inch CUNI 70/30 Bell-End Elbows
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

NAICS: 332216
New
DIBBS
HEATING UNIT, INFRAR
Solicitation # SPE8E5-26-T-3844
The contract is for the procurement of four heating units, infrared type, under NSN 3439-01-436-9799, with a delivery requirement of 167 days after date of award. The solicitation number is SPE8E5-26-T-3844, issued on August 5, 2026, with responses due by August 17, 2026, and is set aside exclusively for small businesses under the SBA Total Small Business Set-Aside provision. The procurement is managed by the Department of Defense through the DDSP New Cumberland Facility, with performance specified at New Cumberland, Pennsylvania, zip code 17070-5002. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA packaging standards, and government identification must be removed from any non-accepted items. Only products explicitly named and identified by part number in the purchase order are considered acceptable, with no alternative substitutes permitted. The item has no shelf life limitation. Primary point of contact is Ira Hedgepeth, reachable via email and phone provided in the contract data.
Saw Blade and Handtool Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
FILTER, AIR, ELECTROS
Solicitation # SPE8E8-26-T-5042
The contract is for the procurement of 29 units of AIR FILTER, ELECTROS with NSN 4460-01-692-2652 under solicitation SPE8E8-26-T-5042, issued as a total small business set-aside under NAICS code 333413. Delivery is required within 167 days of award, with shipments to be furnished FOB origin and inspected and accepted at destination, with no variance allowed in quantity. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation, wrapping, and marking requirements, with no special marking codes applied, and palletization must follow DLA packaging standards. The supplies are to be delivered to the DLA Distribution facility at New Cumberland, Pennsylvania, with a required ship date of February 1, 2027, and the original delivery deadline was October 28, 2026. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, and the revision in effect on the solicitation issue date or award date controls depending on acquisition size. The contract incorporates provisions for potential coverage of covered defense information and requires adherence to DLA transportation and freight procedures. The point of contact for this procurement is Alexis Selby of the Department of Defense.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333515
New
DIBBS
GAGE, PROFILE
Solicitation # SPE8E5-26-T-3780
The contract pertains to the procurement of 12 GAGE, PROFILE units under solicitation SPE8E5-26-T-3780, with a response deadline of August 17, 2026, and a delivery requirement within 167 days after order. The item is identified by NSN 5220-00-446-8307 and is subject to strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Item Unique Identification (IUID) compliance is mandatory in accordance with MIL-STD-130 and the DFARS 252.211-7003 clause. The contractor must be Cybersecurity Maturity Model Certification (CMMC) Level 2 certified through a qualified third-party assessment organization. Technical data associated with this item is subject to export controls under either ITAR or EAR, restricting disclosure to foreign persons regardless of location, and requires prior government authorization. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program status, completion of DOD export control training, and approval from the DLA controlling authority. The contracting office is the DLA New Cumberland Facility, with primary point of contact Khue Nguyen, and the place of performance is listed as New Cumberland, PA, 17070-5002. There is no shelf life requirement for this item.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 323117
New
DIBBS
MARKER, IDENTIFICATION
Solicitation # SPE8E6-26-T-4066
This contract pertains to the procurement of a Marker, Identification with NSN 7690-01-290-0175 and part number TKG0896-1, supplied by FRUEHAUF CORP, and is governed by stringent DLA packaging and quality requirements. The item is classified as a critical application item with a non-extendable Type I shelf life of 24 months, and all packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, including the special marking code 32 for shelf-life identification. Packaging and palletization must adhere to DLA’s official procurement standards, and the item must be delivered FOB origin with no quantity variance allowed. Delivery is required within 36 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. The unit of issue is PG, with a total quantity of 21 units, and the contract references technical and quality requirements from the DLA Master List, applicable as of the solicitation issue date. Transportation instructions are governed by DLAD Proc Notes C19 and C20, and the contract is issued under solicitation SPE8E6-26-T-4066 with a response deadline of August 17, 2026, and an original required delivery date of August 5, 2026.
Books Printing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333414
New
DIBBS
IMPELLER, FAN, AXIAL
Solicitation # SPE8E7-26-T-3511
The item sought is an axial fan impeller, identified by NSN 4140-01-561-8011, with a quantity of 21 units, required as a component of an Uninterruptible Power Supply within the Vestdavit RIB Davit System on LCS-1 vessels. Though the UPS is manufactured by GE INV, procurement must use Vestdavit’s part number 12271 through their government distributor, Scan Pacific Northwest LLC, with CAGE code 3ESE0. The solicitation, issued under contract number SPE8E7-26-T-3511, is governed by DLA packaging and technical quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issuance date. All supplies must comply with the requirement to remove government identification from non-accepted items. Delivery is due in 167 days after award, and the place of performance is New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026. The NAICS code 333414 applies, and the contracting office is the DLA New Cumberland Facility under the Department of Defense, with Kelly Mitchell listed as the primary point of contact.
Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 321114
New
DIBBS
CORROSION PREVENTIVE C
Solicitation # SPE8ES-26-T-2509
This contract solicits a corrosion preventive compound identified by NSN 8030-01-722-1433 and part number ETCPRTU-2B3C from Chemeon Surface Technology, LLC, with a quantity of 5 containers delivered FOB destination under solicitation SPE8ES-26-T-2509. The item is classified as a Type 2 (Code 6) shelf life item with a 24-month extendable shelf life, subject to specific packaging and marking requirements outlined in MIL-STD-2073-1E and MIL-STD-129, including the Special Marking Code 33 for Type II shelf life. Packaging must comply with DLA procurement standards and the Hazardous Materials Packaging, Marking, and Shipping requirements, with all hazardous material documentation—including Safety Data Sheets and labeled containers—aligned with OSHA’s revised Hazard Communication Standard (29 C.F.R. 1910.1200) effective June 1, 2015. Suppliers must submit SDS and compliant labels for approval prior to award and ensure employee training on the new standards. The item must be delivered within 173 days of contract award, with a required delivery date of October 15, 2026, and a need ship date of February 1, 2027. Delivery is to the DLA Distribution facility at New Cumberland, Pennsylvania, with a strict zero variance in quantity and inspection and acceptance occurring at the destination. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, and the applicable revision depends on the solicitation or award date. All units of issue follow DoD authorized standards as aligned with ANSI X12.
Wood Preservation

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
CASE, STORAGE AND TR
Solicitation # SPE8E6-26-T-4056
The contract pertains to the procurement of 35 units of a specific item identified by NSN 4240-01-654-9843 and part number 940210, with a unit price of $35.00, totaling $1,225.00. Delivery is required within 15 days of the contract award, FOB origin, with no variance allowed in quantity. Packaging must strictly comply with MIL-STD-2073-1E, including specific preservation methods, materials, and unit containerization per DLA’s requirements. Marking must adhere to MIL-STD-129 with no special marking codes applied, and palletization must follow DLA’s packaging standards. The product must be shipped to the designated DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by DLA procedural notes C19 and C20. The item is subject to Defense Logistics Agency packaging requirements and technical standards referenced in the DLA Master List of Technical and Quality Requirements. The contract incorporates cybersecurity requirements mandating a CMMC Level 2 self-assessment and applies to covered defense information. The solicitation number SPE8E6-26-T-4056 was issued with a response deadline of August 17, 2026, and an original delivery target of September 19, 2026. The need ship date is set for August 5, 2026, indicating the timing for readiness. Performance occurs at the DLA New Cumberland facility, and all technical and quality standards referenced are controlled by the DLA Master List revision in effect on the RFP issue date. Inspection and acceptance occur at the destination point, and the contractor must be prepared to remove any government identification from non-accepted supplies. The ordering activity is the Department of Defense, with primary point of contact John Lieb at DLA, and the North American Industry Classification System code is 339113.
Surgical Appliance and Supplies Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 325520
New
DIBBS
ADHESIVE
Solicitation # SPE8ES-26-T-2502
The contract specifies the procurement of 3 cases of 50-milliliter adhesive units, part number DP-460 from 3M Company, identified by NSN 8040-01-642-2514, with each case containing twelve units. The product is amber and off-white in color and must comply with a non-extendable 24-month shelf life requirement for a Type I (Code M) item. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with special labeling indicating Type I shelf life, and palletization must follow DLA packaging standards. Delivery is FOB destination, with a required delivery date of January 25, 2027, and a lead time of 173 days, subject to zero variance in quantity. The adhesive is classified as a hazardous material, requiring full compliance with OSHA’s revised Hazard Communication Standard, including submission of Safety Data Sheets (SDS) and approved HCS or CPSA/FHSA-compliant labels prior to award, along with employee training on the new requirements. Storage must be maintained between 60-80°F (15-27°C) to preserve shelf life. Technical and quality requirements are governed by the DLA Master List, and the contract incorporates provisions for handling covered defense information. All deliveries must be sent to the DLA Distribution facility in New Cumberland, Pennsylvania, and shipping logistics must follow DLAD procedural notes C19 and C20.
Adhesive Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336611
New
DIBBS
RAMP ASSY CORNER RH
Solicitation # SPE8E5-26-T-3818
This contract covers the procurement of 16 units of RAMP ASSY CORNER RH, identified by NSN 5440-01-553-0684 and part number 7017757152, under solicitation SPE8E5-26-T-3818. The item must be manufactured and delivered in strict compliance with technical specifications referenced from the DLA Master List of Technical and Quality Requirements, including welding and liquid penetrant nondestructive inspection standards per AWS D1.2. A certificate of conformance is required unless waived by a quality assurance letter of instruction, and all components must adhere to dimensional and assembly directives, particularly the prohibition against welding the strut base P12 to the gusset plate P18 as shown on the drawing; instead, P12 must be packaged separately with an instruction sheet included in each ramp assembly. The product must be packaged per ASTM D3951 and labeled in accordance with MIL-STD-129, with palletization following DLA packaging requirements, and all packaging marked with the specified unit of issue and quantity per unit pack. Mercury and mercury-containing compounds are strictly prohibited unless exceptions apply for batteries, instruments, or weapon systems, and must meet secondary containment and shock-proof standards per NAVSEA 5100-003D. The contract mandates full compliance with federal safety regulations, including the submission of Safety Data Sheets and Hazard Communication Standard labels updated to the Globally Harmonized System, effective June 1, 2015, with supplier employee training required on these changes. Delivery is FOB origin with inspection and acceptance occurring at destination, and must be completed within 167 days of contract award, with a required ship date of February 1, 2027, and original delivery deadline of October 24, 2027. No quantity variance is permitted, and all items must be shipped to the DDSP New Cumberland Facility in Pennsylvania. The solicitation is a total small business set-aside under NAICS code 336611, with drawings available via DIBBS during the open solicitation period. The contract incorporates FAR clauses for inspection, conformance, and standard requirements, and all documentation, including technical data packages and revisions referenced, must align with the specified drawing revisions and dated configurations.
Ship Building and Repairing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333515
New
DIBBS
LIGHT, COCKPIT, AIRCRAFT
Solicitation # SPE8E7-26-T-3487
This contract pertains to the procurement of aircraft cockpit lighting components under solicitation SPE8E7-26-T-3487, issued by the Department of Defense through the DDSP New Cumberland Facility. The item, identified by NSN 6220-01-563-8636 and part number 937-000-10M, is supplied by Luminator Holding L.P and Leonardo Spa Helicopters Division, with a total quantity of 13 units at a unit price of $13.00, resulting in a total contract value of $169.00. Delivery is required within 153 days from the contract date, with FOB origin terms, and inspection and acceptance occur at the destination. Packaging must comply with DLA Master List of Technical and Quality Requirements, particularly RP001 for packaging standards, MIL-STD-129 for marking and labeling, and either TQ requirement IP025 for hazardous materials per FED-STD-313 or ASTM D3951 for non-hazardous commercial packaging, with the DLA standards overriding ASTM where applicable. All packaging must reflect the specified Unit of Issue and Quantity per Unit Pack, and palletization must adhere strictly to DLA guidelines. The contract is a total small business set-aside under NAICS code 333515, with a response deadline of August 17, 2026, and was posted on August 5, 2026. The delivery destination is the DLA Distribution facility at 2083 Normandy Drive, New Cumberland, PA 17070-5002, with a required ship date of January 18, 2027, and an original delivery deadline of February 27, 2027. No quantity variance is permitted. Transportation instructions are governed by DLAD Proc Note C19 for general shipment and C20 for first destination handling. Documentation for source approval and handling of covered defense information is required as stipulated by RC001 and RD003. All technical and quality requirements referenced via R or I numbers in the DLA Master List take precedence over any other standards. The primary point of contact for the contract is Kelly Mitchell, reachable via email and phone provided.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
SHEETING, REFLECTIVE
Solicitation # SPE8E5-26-T-3781
Reflective sheeting meeting specification 3M ScotchLite 3271, 24 inches nominal width by 50 yards nominal length, is procured under contract SPE8E5-26-T-3781 with NSN 9390-00-501-5145 and part number 7000030797. The contract requires 14 rolls, each defined as one RO equal to 50 yards, with no variance allowed in quantity. Delivery is FOB origin and must be completed within 167 days of award, with the original required delivery date set for June 11, 2027, and a need ship date of February 1, 2027. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R- and I-numbers, which supersede industry standards such as ASTM D3951. Packaging must comply with DLA Packaging Requirements RP001 and MIL-STD-129 for marking and labeling, with hazardous material handled per Fed-Std-313 and TQ requirement IP025 if applicable, otherwise commercially packaged in accordance with ASTM D3951. Palletization must align with RP001, and all packaging must be labeled consistent with the specified Unit of Issue and Quantity per Unit Pack. Inspection and acceptance occur at destination. The delivery address is the DLA Distribution facility at New Cumberland, Pennsylvania, and transportation protocols are governed by DLAD Proc Notes C19 and C20. The solicitation was issued on August 5, 2026, with a response deadline of August 17, 2026, under the NAICS code 327999, and is managed by the Department of Defense through the DDSP New Cumberland Facility.
All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 325510
New
DIBBS
SPECTRAL SELECTIVE COA
Solicitation # SPE8ES-26-T-2504
The contract calls for the delivery of Spectral Selective Coating in polyurethane form, specifically identified by NSN 8010-01-681-7475, with a total quantity of 16 boxes, each containing eight one-pint units. The coating must be dark gray, matching color chip number 36170, and packaged in accordance with DLA packaging requirements. Each unit package must include a MIL-STD-129 label featuring the lot or batch number. The product is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date. Hazardous material provisions require submission of Safety Data Sheets compliant with 29 C.F.R. 1910.1200, as mandated by OSHA’s revised Hazard Communication Standard effective June 1, 2015, along with corresponding labels aligned with either the HCS or the Consumer Product Safety Act and Federal Hazardous Substance Act. Suppliers must also certify that employees have been trained on the new SDS formats, labeling standards, and regulatory requirements. Physical identification of the bare item must comply with RQ017, and all government identification must be removed from non-accepted supplies per RQ011. Delivery is due within 34 days after contract award, with the solicitation issued on August 5, 2026, and responses due by August 11, 2026. The contract is administered by the Department of Defense through the DDSP New Cumberland Facility, with point of contact Stephen Ockenhouse.
Paint and Coating Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details