Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

TRAY, DRAINAGE, CATHE

Active
SPE2DS-26-T-298SFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of a single unit of a Safety-T-Centesis Catheter Drainage Tray, sized 6FR x 16CM, intended for thoracentesis and paracentesis drainage procedures. The item is regulated by the FDA and requires confirmation via EBS referral by the contracting official, including bidder and manufacturer details. Packaging must comply with commercial standards as defined in the procurement document, with each unit sealed in a protective container that prevents damage or breakage, and shipped in suitable exterior containers capable of secure, cost-effective delivery to the designated point under common carrier terms. All items must be marked in accordance with Medical Marking Standard No. 1, which replaces MIL-STD-129, and must adhere to DLA Packaging Requirements for Procurement and other technical and quality specifications listed in the DLA Master List of Technical and Quality Requirements. The item is identified by NSN 6515-01-516-4718 and is subject to Covered Defense Information requirements. The solicitation was posted on August 2, 2026, with a response deadline of August 10, 2026, and delivery must occur within 20 days after award. The procurement falls under NAICS code 339112 and is managed by the Department of Defense’s Medical Supply Chain MD Surg FSF.

General Info

Procurement of one 6FR x 16CM Safety-T-Centesis Catheter Drainage Tray per FDA and DLA specs, delivered within 20 days.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

339112 - Surgical and Medical Instrument ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

SPE2DS-26-T-298S.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
ContactsNo contacts available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office AddressUS
ContactsNo contact information available

Full Description

Show more
TRAY,DRAINAGE,CATHE
Tray, Drainage, Catheter
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED IN A SUITABLE SEALED UNIT CONTAINER CAPABLE OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT THE LOWEST RATE, TO POINT OF DELIVERY CALLED FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1 (MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
SAFETY-T-CENTESIS CATHETER DRAINAGE TRAY, 6FR X 16CM; FOR
THORACENTESIS/PARACENTESIS DRAINAGE
UNIT OF ISSUE EACH (EA)
This device or drug is regulated by the FDA. Note to Buyers: The contracting official shall send a referral in EBS to the product specialist for confirmation. Please include bidder name and bidder contact information, manufacturer name, manufacturer part number, and item description. RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SPE2DS-26-T-298S
SECTION B
ADEQUATE DATA FOR THE NSN/Part Number: 6515-01-516-4718 Quantity: 1 EA Purchase Request: 7017693292QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339112
New
DIBBS
TAPE, ATHLETIC
Solicitation # SPE2DS-26-T-299M
Athletic tape, 2.75 inches wide and 30 yards long, in beige color, made with breathable foam and nonsterile, is being procured under NSN 6515-01-714-2078 with a quantity of two boxes, each containing twelve units. The product must comply with technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date based on acquisition size. Packaging must meet DLA standards, and any non-accepted supplies must have government identification removed prior to return. The solicitation, identified as SPE2DS-26-T-299M, was posted on August 2, 2026, with a response deadline of August 10, 2026, and requires delivery within twenty days after order. The purchase request is 7017609499, and the place of performance is Fort Bragg, North Carolina, under the Department of Defense’s Medical Supply Chain. The NAICS code is 339112, and the procurement is managed by the Federal agency for medical surgical supply.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
CUFF SET, SPHYGMOMANOME
Solicitation # SPE2DS-26-T-294Y
The contract is for the procurement of four small adult aneroid sphygmomanometer cuff sets, each fully equipped with an inflation bulb, valve, one-piece inflation tube, and a shock-resistant, gear-free, latex-free reusable cuff-mounted aneroid gauge certified to an accuracy of ±3 mm Hg with a five-year warranty. The device must withstand drops from a height of 30 inches in compliance with AAMI standards and is designed for durability and reliability in clinical use. All components are specified to meet exact technical and quality criteria outlined in the DLA Master List of Technical and Quality Requirements, with packaging governed by DLA standards and requirements for removal of government identification from non-accepted supplies. The unit of issue is each, and bidders must clearly state the source and part number being offered. The item is identified by NSN 6515-01-648-3774 under solicitation SPE2DS-26-T-294Y, issued by the Department of Defense’s Medical Supply Chain MD Surg FSF for delivery to Fort Hood, Texas, with a required delivery timeline of 20 days after order. The solicitation was posted on August 2, 2026, and responses are due by August 10, 2026. The NAICS code 339112 applies to medical equipment manufacturing, reflecting the specification and procurement intent under federal acquisition regulations. Bidders are expected to comply with all DLA packaging, identification, and technical compliance requirements as referenced in the solicitation, and no set-asides are indicated for this procurement.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
TOURNIQUET, NONPNEUMATI
Solicitation # SPE2DS-26-T-298Z
The nonpneumatic tourniquet is a medically validated device designed to completely occlude blood flow in upper and lower extremities, verified through scientific methods at the U.S. Army Institute for Surgical Research. It features a one-handed, single-route buckle system with a reinforced windless and windless clip mechanism to ensure secure and rapid application. A reinforced stabilization plate with a beveled contact bar minimizes skin pinching, while a grey time tape and Velcro secure strap provide additional functionality and ease of use. The device is black in color with a red elliptical tip to assist users in locating and threading the strap during emergency application, and once applied, it locks in place via multiple clips for fail-safe retention. It is issued as a single unit and meets strict technical and quality standards as defined by the DLA Master List of Technical and Quality Requirements. This procurement under contract solicitation SPE2DS-26-T-298Z requires two units with delivery expected within five days of award, performed at Fort Bliss, Texas. The National Stock Number is 6515-01-521-7976 and the purchase request number is 7017693171. Bidders must clearly state the source and part number being offered. The solicitation is governed by DLA packaging requirements, applies to covered defense information, and mandates removal of government identification from non-accepted supplies. The contract falls under NAICS code 339112, is managed by the Department of Defense’s Medical Supply Chain, and the primary point of contact is Olusola Emmanuel. The solicitation was posted on August 2, 2026, with a response deadline of August 10, 2026.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
SHEARS, TRAUMA
Solicitation # SPE2DS-26-T-296C
The contract calls for two units of trauma shears, specifically 7.5 inch models with coyote brown handles and black titanium coated stainless steel blades featuring a blunt tip, designed for heavy-duty use. These shears are designated under NSN 6515-01-702-8905 and must be supplied with clear identification of the source and part number as required by the bidder. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision tied to the solicitation issue or award date depending on procurement scale. The item falls under packaging requirements specified by DLA and is subject to protocols for removal of government identification from non-accepted supplies. The solicitation, issued under SPE2DS-26-T-296C, was posted on August 2, 2026, with a response deadline of August 10, 2026. Delivery must be completed within 20 days after delivery order, to Fort Campbell, 42223-5000, under the Department of Defense’s Medical Supply Chain. The primary point of contact for inquiries is Dorothy Marquis, reachable via email or phone as listed.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
BLADE, SURGICAL PREPARA
Solicitation # SPE2DS-26-T-300K
The contract pertains to the procurement of surgical preparation blades made of carbon steel, specifically single-edge, straight, 50S type, sourced from Pilling Surgical, Inc. (part number 450205) and American Safety Razor Co. (part number 74-0001), with the unit of issue being a package (PG) of 50 blades. The item is regulated by the FDA, requiring the contracting official to submit a referral in EBS to the product specialist, including manufacturer details, part number, and bidder information. Packaging must comply with commercial standards and the Medical Marking Standard No. 1, which supersedes MIL-STD-129, with containers required to protect against damage and ensure safe delivery via common carrier at the lowest cost. All packaging and marking must meet DLA requirements, and the material is subject to Covered Defense Information provisions. The NSN is 6515-01-147-0210, with a single package quantity of 1 PG under purchase request 7017701239. Delivery is mandated within 20 days FOB destination, with no variance allowed in quantity, and inspection and acceptance occur at the delivery point. The contract is issued under solicitation SPE2DS-26-T-300K, with a response deadline of August 10, 2026, and the place of performance is WaterVliet, NY, 12189-5000. The NAICS code is 339112, and the procurement is for the Department of Defense through its Medical Supply Chain division.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
TUBE, DRAINAGE, SURGI
Solicitation # SPE2DS-26-T-294A
The contract specifies the procurement of 4 packaging groups, each containing 10 sterile, disposable thoracic drainage tubes, totaling 40 units. Each tube is 28 FR, radiopaque, straight, and designed for surgical use, with a required shelf life of 60 months that cannot be extended. The item is identified by NSN 6515-00-763-7367 and must comply with technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, as referenced by R and I numbers. Packaging must adhere to DLA specifications, and all non-accepted supplies must have government identification removed prior to return. The contract includes provisions for covered defense information and requires bidders to clearly specify the manufacturer’s core and part numbers. The solicitation, issued under SPE2DS-26-T-294A, was posted on August 2, 2026, with responses due by August 10, 2026. Delivery is due within 20 days of award, with performance located at Fort Hood, Texas. The procurement falls under NAICS code 339112 and is managed by the Department of Defense’s Medical Supply Chain, with Chandler Alvarez as the point of contact.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
CUFF, SPHYGMOMANOMETER
Solicitation # SPE2DS-26-T-299V
The contract is for the procurement of two adult thigh sphygmomanometer cuffs, each including a compression bag, tubing, and connector, with nonconductive materials designated by NSN 6515-01-121-6480 and part number 0661-1884. The item is subject to FDA regulation and requires confirmation via EBS referral by the contracting official, including bidder and manufacturer details. The units must be supplied in compliance with DLA’s Master List of Technical and Quality Requirements, which take precedence over other standards, and packaged according to ASTM D3951 and Medical Marking Standard No. 1, superseding MIL-STD-129. Packaging must ensure protection from damage and be suitable for commercial shipping, with palletization following DLA packaging requirements. Delivery is FOB destination within 20 days of contract award, with strict 0% quantity variance and inspection and acceptance occurring at the delivery point. Shipment is directed to USS Tulsa (LCS-16), FPO AP 96691, under vessel shipment guidelines, and must be marked and labeled per specified protocols. The required delivery date is August 4, 2026, and bids must be submitted by August 10, 2026, under solicitation SPE2DS-26-T-299V, with pricing set at $2.00 per unit for a total of $4.00. Only approved vendors may submit, and the supplier must identify the source and part number being offered.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
TUBE, VASCULAR GRAFT
Solicitation # SPE2DS-26-T-295R
The contract is for a thin-walled vascular graft with an internal diameter of 6 millimeters and a standard length of 60 centimeters, to be delivered in quantities of four units, each as a standalone item. The product must have a shelf life of 60 months, non-extendable, with no more than nine months elapsed between the date of manufacture and the date of delivery to the government. Packaging must comply with DLA standards, and all government identification must be removed from non-accepted supplies. Technical and quality requirements referenced by R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on the acquisition type. The item is identified by NSN 6515-01-717-0551 under procurement request 7017584180, and delivery is required within five days of award. The solicitation, issued under SPE2DS-26-T-295R on August 2, 2026, with a response deadline of August 10, 2026, is managed by the Department of Defense’s Medical Supply Chain through the Fort Bragg, North Carolina, location, with Michael Small as the primary point of contact.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
CUFF SET, SPHYGMOMANOME
Solicitation # SPE2DS-26-T-294W
The contract specifies the procurement of six reusable sphygmomanometer cuff sets designed for pediatric use, featuring a one-piece, shock-resistant, latex-free cuff with a mounted aneroid gauge certified to ±3 mm Hg accuracy and backed by a five-year warranty. Each set includes an inflation bulb, valve, and inflation tube, and the device is engineered to withstand drops from up to 30 inches in height in compliance with AAMI standards. The item is identified by NSN 6515-01-648-3762 and must be supplied with clear source and part number documentation. The solicitation falls under DLA Master List technical and quality requirements, with packaging governed by DLA standards and provisions for removal of government identification from non-accepted supplies. It is subject to potential covered defense information requirements and is tied to a federal procurement under NAICS code 339112, managed by the Department of Defense’s Medical Supply Chain. Delivery is required within 20 days of award to Fort Hood, Texas, with bids due by August 10, 2026, and inquiries directed to Michael Kohlbrenner of the DLA.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
SYRINGE, AIR, DENTAL
Solicitation # SPE2DS-26-T-297H
The contract specifies the procurement of a bulb-type dental air syringe with a 2-ounce capacity, manufactured by Buffalo Dental under part number 80910 and also available through Henry Schein Inc. under part number 365-1663, both identified by the NSN 6520-00-501-8000. The item is regulated by the FDA, requiring the contracting official to refer the bid details to a product specialist for confirmation prior to award. Packaging must comply with DLA Packaging Requirements for Procurement and Medical Marking Standard No. 1, superseding MIL-STD-129, with each unit sealed in a protective container and shipped in commercial outer packaging suitable for safe carrier delivery at the lowest rate. The syringe must not contain mercury or mercury compounds except as specifically exempted for functional components like batteries or instruments, and any portable fluorescent lamps or instruments containing mercury must have shockproof construction and a secondary containment boundary per NAVSEA 5100-003D. The unit of issue is each, with a contracted quantity of one unit, to be delivered FOB destination within five days to the Carrier Outfitting Material Support Center in Suffolk, Virginia. Shipment must use the fastest traceable means—not parcel post—and is subject to zero variance in quantity. All packaging and labeling must adhere to DLA technical and quality requirements, with compliance precedence over ASTM D3951. The solicitation number is SPE2DS-26-T-297H, issued by the Department of Defense’s Medical Supply Chain, with a response deadline of August 10, 2026, and a required delivery date of August 4, 2026.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
TUBE, TRACHEAL
Solicitation # SPE2DS-26-T-295B
The product is a sterile, disposable tracheal tube with a Murphy design, featuring a cuff and a beveled tip, constructed from polyvinyl plastic with an inside diameter of 7 mm and a size of 28 Fr. It is designed for nasal and oral use, individually packaged, and supplied in packages of ten units per package. The item has a strict shelf-life requirement of 72 months from the date of manufacture, with no more than 10 months allowed to have elapsed between manufacture and delivery to the government. Packaging and quality standards are governed by DLA specifications, including requirements for the removal of government identification from non-accepted supplies and compliance with DLA packaging protocols. The National Stock Number is 6515-01-047-5368, with a quantity of two packages ordered under purchase request 7017702791, subject to delivery within five days of award. The solicitation is issued under SPE2DS-26-T-295B by the Department of Defense’s Medical Supply Chain, with responses due by August 10, 2026, and performance to be fulfilled at Offutt AFB, Nebraska. Point of contact is Chandler Alvarez, reachable via phone or email provided.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
SUCTION KIT, EASY, FIELD
Solicitation # SPE2DS-26-T-300G
The contract is for a compact, field-deployable suction kit designed for military medical use, comprising a disposable suction device and a non-vented endotracheal/nasopharyngeal suction catheter, both identified by specific NSNs. All components are housed in a custom-built, olive drab Cordura nylon pouch, ensuring portability and durability in tactical environments. The unit is issued as a single complete kit and must be packaged in sealed commercial containers that protect against damage and comply with Medical Marking Standard No. 1, which replaces MIL-STD-129. Shipment must be arranged in exterior containers suitable for common carrier transport at the lowest cost, with export packaging where required. Technical and quality requirements referenced through R and I numbers are governed by the DLA Master List, with revisions controlled based on procurement type and timeline. Packaging must adhere to DLA’s specified standards, and government identification must be removed from non-accepted supplies. Bidders must clearly state the source and part number being offered. The solicitation number is SPE2DS-26-T-300G, issued on August 2, 2026, with a response deadline of August 10, 2026. The contract calls for two units of the complete kit with a purchase request quantity of ten, requiring delivery within ten days of award. The acquiring agency is the Department of Defense through the Medical Supply Chain MD Surg FSF, with Vernon Stevenson as the primary point of contact.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

NAICS: 622110
New
DIBBS
PAPER, ELECTROCARDIO
Solicitation # SPE2DS-26-T-296Q
The contract is for the procurement of electrocardiogram recording paper, specifically a 19.6-foot roll with a red grid pattern, designated by NSN 6515-01-586-1986 and manufacturer part number 989803138171 from Philips Medical Systems. The unit of issue is the package (PG), with each package containing ten individual rolls, and the total quantity required is three packages, equivalent to thirty rolls. Delivery is required within five days to the U.S. Naval Hospital in Guam, FOB destination, with no variance allowed in quantity. The product is regulated by the FDA, and bidders must clearly indicate the country of origin and part number being supplied. All packaging must comply with commercial standards as specified in the procurement document, including sealed unit containers to prevent damage and commercial shipping containers suitable for safe transport at the lowest cost. Medical Marking Standard No. 1 supersedes MIL-STD-129 and must be followed for labeling, with copies available through DLA Troop Support. The item is intended for use with the 6515-01-582-4072 defibrillator/monitor-recorder system. Technical and quality requirements referenced in the contract are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date. The contract also includes specific transportation instructions, government-use identifiers, and procurement details tied to the solicitation number SPE2DS-26-T-296Q, with a response deadline of August 10, 2026, and an original required delivery date of August 4, 2026.
General Medical and Surgical Hospitals

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
SPONGE, SURGICAL
Solicitation # SPE2DS-26-T-297M
The contract specifies the procurement of surgical sponges that are radiopaque, white, gauged, and sized at 4 inches by 8 inches, with ten sponges per container and a unit of issue of 800 sponges per package. These sponges are intended for use in operating rooms and must have a shelf life of 36 months from the date of manufacture, with no more than five months elapsed between manufacturing and delivery to the government. Strict labeling requirements mandate that all packaging include the manufacturer date, expiration or retest date, contract number, and lot number, in compliance with the latest revision of Medical Marking Standard No. 1, which supersedes MIL-STD-129. Packaging must be commercial grade, sealed to protect contents from damage, and shipped in suitable exterior containers that ensure safe delivery at the lowest possible freight rate to the designated delivery point in APO, 09094-3219. If the product is not stored in a climate-controlled environment for a month or longer, the shelf life counter must be halved. All products must adhere to the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, and bidders must provide the source and part number. The solicitation was issued under contract number SPE2DS-26-T-297M with a deadline for response on August 10, 2026, and requires delivery within 20 days after award.
Surgical Appliance and Supplies Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334511
New
DIBBS
CLAMP, TUBING, REGULATIN
Solicitation # SPE2DS-26-T-294F
The contract calls for 8 packages of ratcheting plastic tubing clamps, each package containing 25 units, for a total of 200 clamps. Each clamp is 4.3 inches long, non-sterile, disposable, and designed to occlude tubing with an outer diameter between 1 and 8 mm, featuring smooth jaws and finger rings for easy handling. The item is identified by NSN 6515-01-614-0551 and must be supplied with the source and part number clearly specified by the bidder. Packaging requirements mandate that each unit be sealed in a protective container to prevent damage and that all shipments be packed in commercial exterior containers suitable for safe transport via common carrier at the lowest possible rate to the delivery point at Fort Hood, Texas. All packaging and marking must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and copies of the standard are available through DLA Troop Support. The solicitation, issued under SPE2DS-26-T-294F, incorporates technical and quality requirements from the DLA Master List, and the revision in effect at the solicitation issue date controls compliance. The contract was posted on August 2, 2026, with a response deadline of August 10, 2026, and delivery must be completed within 20 days of award. The purchasing agency is the Department of Defense, Medical Supply Chain MD Surg FSF, with Michael Small as the primary point of contact.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 621410
New
DIBBS
CULTURE MEDIUM, MOTI
Solicitation # SPE2DS-26-T-297C
The contract specifies the procurement of Culture Medium for Motility Determination, identified by NSN 6550-01-732-8840, in a format of 15mm x 103mm tubes containing TTC indicator, with each package comprising twenty 5 mL units. The unit of issue is PG, and the order quantity is two PG. The item must have a shelf life of twelve months, non-extendable, with no more than one month elapsed between the date of manufacture and the date of delivery to the government. All packaging and labeling must comply with Medical Marking Standard No. 1, including clear markings for the date of manufacture, expiration or retest date, and the contract or lot number, in accordance with the latest MMS1C revision. The product requires refrigerated storage between 2 to 8 degrees Celsius and must not be frozen. Packaging must be commercial-grade, sealed, and designed to prevent damage during transit, with shipping containers chosen to ensure safe and cost-effective delivery to the specified point of performance in Williamsburg, Virginia. The item is subject to Defense Logistics Agency packaging requirements and the removal of government identification from non-accepted supplies. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with revisions effective as of the solicitation issue date. Bidders must provide the source and part number of the item being offered, and the response deadline is August 10, 2026, with delivery required within five days after order award.
Family Planning Centers

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 456199
New
DIBBS
PAPER, MEDICAL RECORDIN
Solicitation # SPE2DS-26-T-298U
The contract specifies the procurement of medical recording paper intended for use with Propaq MD and X defibrillator monitor systems, with each unit consisting of a box containing six individual sheets. The packaging must comply with commercial standards outlined in the procurement documentation, requiring each complete unit to be sealed in a container that safeguards against damage or breakage, and all units must be shipped in exterior containers suitable for safe transport by common carriers at the lowest available rate to the designated delivery point. All items must be labeled in accordance with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and bidders must reference the NSN/Part Number 6515-01-628-6597 while clearly identifying the source and part number being supplied. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Delivery is required within 20 days after order, under solicitation SPE2DS-26-T-298U, issued by the Department of Defense’s Medical Supply Chain MD Surg FSF, with performance located at Tinker AFB, Oklahoma, and primary point of contact Marc Canalichio.
All Other Health and Personal Care Retailers

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
BANDAGE, ADHESIVE
Solicitation # SPE2DS-26-T-299S
The contract solicits adhesive bandages specified as BANDAID 1 inch by 3 inches flesh sterile and elastic adhesive bandages with a central gauze pad, with a unit of issue of a package containing 100 each. The National Stock Number is 6510-00-761-5062, and the quantity required is three packages, to be delivered within 20 days of award to Fort Bliss, Texas, with the delivery address ending in 79918-2527. All medical acquisitions under this solicitation must comply with commercial packaging standards, requiring each unit to be sealed in a container that protects against damage and breakage, and all exterior shipping containers must ensure safe, cost-effective delivery via common carrier. Marking must adhere to Medical Marking Standard No. 1, superseding MIL-STD-129, with copies available through DLA Troop Support or their website. Bidders must specify the source and part number being supplied to ensure compliance with the technical and quality requirements referenced through the DLA Master List of Technical and Quality Requirements, where revisions effective on the solicitation issue date or award date govern. The solicitation, identified as SPE2DS-26-T-299S, was posted on August 2, 2026, with a response deadline of August 10, 2026, under NAICS code 339113, managed by the Department of Defense’s Medical Supply Chain, with Tiffany Parker as the primary point of contact.
Surgical Appliance and Supplies Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details