Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

TRIGGER GUARD MACHING

Active
SPEFA3-26-T-0340Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of three Trigger Guard Machining units with NSN 1095-LN-002-0479 and part number 69566-3, supplied by ADAMS RITE AEROSPACE, INC, under solicitation SPEFA3-26-T-0340. The requirement is for delivery FOB destination within 216 days, with no variance allowed in quantity and inspection and acceptance occurring at the delivery point. Packaging must comply with ASTM D3951, but is superseded by DLA’s Master List of Technical and Quality Requirements, and all packaging and labeling must adhere to MIL-STD-129. Unit of issue is each, with a total price of $3.00 per unit. Sampling for quality assurance must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Item Unique Identification is not required per customer request. The material has no shelf life restriction. Delivery is to be made to the Fleet Readiness Center Southeast in Jacksonville, Florida, with freight shipped to DLA Distribution Jacksonville at the same address. The original required delivery date is August 5, 2026, and the solicitation was posted on August 5, 2026, with a response deadline of August 13, 2026. The contract is issued under DLA’s authorized unit of issue framework and is governed by the Department of Defense’s acquisition regulations.

General Info

Three Trigger Guard Machining units at $3.00 each, FOB destination, delivery to Jacksonville by August 5, 2026, per MIL-STD-129 and ASTM D3951.

Agency

Department Of Defense → DLA FLEET READINESS CENTER SOUTHEASTView Agency

NAICS

488190 - Other Support Activities for Air TransportationView NAICS

Place of Performance

AVIATION RETAIL STOCK NAS, JACKSONVILLE, FL, 32212-0103, US

Set-Aside

NONE

Documents

(1)

Request for Quotations SPEFA3-26-T-0340

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA FLEET READINESS CENTER SOUTHEAST
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DLA FLEET READINESS CENTER SOUTHEAST
View Agency Profile
Office AddressUS
Contacts
JAMES GREEN
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
TRIGGER GUARD MACHING
TRIGGER GUARD MACHING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
ADAMS RITE AEROSPACE, INC 80477 P/N 69566-3
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017762808 0001 EA 3.000
NSN/MATERIAL:1095LN0020479
DELIVERY (IN DAYS):0216
SPEFA3-26-T-0340
SECTION B
PR: 7017762808 PRLI: 0001 CONT’D
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
N02DLA
FLEET READINESS CENTER SOUTHEAST
109 YORKTOWN AVE
AVIATION RETAIL STOCK NAS
JACKSONVILLE FL 32212-0103
US
FREIGHT SHIPPING ADDRESS:
N02DLA
DLA DISTRIBUTION JACKSONVILLE
M/F:DLA WEAPONS SS JACKSONVILLE
109 YORKTOWN AVE
JACKSONVILLE FL 32212-0103
US
Need Ship Date:00/00/0000 Original Required Delivery Date:08/05/2026
SPEFA3-26-T-0340 NSN/Part Number: 1095-LN-002-0479 Quantity: 3 EA Purchase Request: 7017762808QTY: 3 Delivery: 216 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 488190
New
DIBBS
ANGLE
Solicitation # SPEFA3-26-T-0338
This contract, issued under solicitation SPEFA3-26-T-0338 by the Defense Logistics Agency Fleet Readiness Center Southeast, calls for the delivery of three units of part number 70201-22109-120 with NSN 1560-LN-003-4876, to be delivered FOB destination within 84 days of the contract award, with a required delivery date of August 5, 2026. The quantity is fixed with no variance allowed, and inspection and acceptance occur at the delivery destination. Packaging must comply with ASTM D3951 and MIL-STD-129, with all labeling and palletization following DLA’s Packaging Requirements for Procurement, and any conflicting requirements from the DLA Master List of Technical and Quality Requirements supersede those of ASTM standards. Unit of Issue is each, and the contract specifies that Item Unique Identification is not required per the Service customer’s request. Sampling shall follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs as defined unless specified otherwise. Deliveries must be sent to the specified freight and parcel post addresses in Jacksonville, Florida, and the contract is subject to the DLA Master List revisions effective on the solicitation issue date. The contract value is based on a unit price of $3.00 per unit for a total of $9.00.
DLA FLEET READINESS CENTER SOUTHEAST

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
WASHER, AIRCRAFT, MAT
Solicitation # SPE4A6-26-T-09ZZ
The contract requires the delivery of 84 aircraft mat washers identified by NSN 5310015622686 under solicitation SPE4A6-26-T-09ZZ, with a 98-day delivery window and FOB origin terms, meaning title and risk transfer to the government upon shipment from the contractor’s facility. The product must conform to technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, and sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances allowed unless otherwise specified; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Packaging must adhere to MIL-STD-2073-1E using packaging code U, with unit containers as boxes and intermediate containers as envelopes, while marking must comply with MIL-STD-129, including barcoding and no special marking codes. The contractor is prohibited from using mercury or mercury-containing compounds in preservation, packaging, packing, or marking unless functional use in batteries, instruments, sensors, controls, weapon systems, or fluorescent lamps is involved, in which case items must be shock-proof and contain a secondary containment boundary per NAVSEA 5100-003D. All hazardous materials must be labeled and documented according to 29 CFR 1910.1200 and DFARS 252.223-7001, with Safety Data Sheets required to be submitted prior to award. The contract mandates use of U.S.-flag vessels for sea transportation unless a formal waiver is granted 45 days in advance, and this requirement flows down to subcontracts above the simplified acquisition threshold. Inspections and acceptance occur at the destination, managed by the government under FAR 52.246-2, and all payment requests must be submitted through Wide Area WorkFlow (WAWF). The solicitation incorporates multiple Federal Acquisition Regulation clauses including cybersecurity safeguards, whistleblower protections, mercury restrictions, hexavalent chromium prohibitions, export controls, and subcontracting obligations, with deviations applied to certain clauses for updated compliance standards. The contract does not specify unit pricing nor total value, and award is not explicitly based on a Lowest Price Technically Acceptable or best value trade-off evaluation. Offers must be submitted via
ASC COMMODITIES DIVISION

POSTED

about 22 hours ago

DEADLINE

in 4 days
View Details
NAICS: 488190
New
DIBBS
FLEX DUCT ASSEMBLY
Solicitation # SPEFA5-26-T-0976
The contract pertains to the procurement of a Flex Duct Assembly, identified by part number 126657-914 and NSN 2835-LL-NC0-4571, with a quantity of 25 units to be delivered FOB destination within 132 days from the order placement. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede any other standards unless explicitly overridden by contract specifications. Verification and sampling follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The item is to be packaged in accordance with ASTM D3951 but must fully comply with the more stringent DLA packaging requirements, including MIL-STD-129 labeling and RP001 palletization standards. Identification marking must adhere to MIL-STD-130N dated November 16, 2012, and the product has no shelf life restriction. The contract is issued under solicitation SPEFA5-26-T-0976 as a Total Small Business Set-Aside under NAICS code 488190, with a fixed unit price of $25 per unit and a total contract value of $625. Delivery is to be made to the Fleet Readiness Center DLA in Cherry Point, North Carolina, with inspection and acceptance occurring at the destination. The original required delivery date is August 4, 2026, and all packaging and marking must reflect the specified unit of issue and quantity per unit pack as outlined in the purchase order.
DLA FLEET READINESS CENTER DLA PSC

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
ANGLE FAIRING
Solicitation # SPEFA3-26-T-0341
The contract pertains to the procurement of one Angle Fairing, identified by NSN 1650-LN-003-5729 and SIKORSKY AIRCRAFT CORPORATION part number 71309-23008-123, under solicitation SPEFA3-26-T-0341. The item is required in a quantity of one unit to be delivered within five days to the Fleet Readiness Center Southeast in Jacksonville, Florida, with delivery terms set at FOB destination and inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization adhering to DLA Packaging Requirements, and the use of parcel post is explicitly prohibited. All technical and quality requirements referenced through the DLA Master List take precedence over general standards, and sampling procedures must follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stipulated. Attributes on drawings are to be verified at specified levels, and unspecified characteristics are treated as major. The item has no shelf life requirement, and Item Unique Identification is not mandated per DFARS 252.211-7003(c)(1)(i). The contract specifies a fixed quantity with no variance allowed, and the required delivery date is August 7, 2026, with the original solicitation posted on August 5, 2026, and responses due by August 13, 2026. The unit of issue is each, and pricing is listed at one unit with a total price of one. Shipping instructions direct use of the fastest traceable means, with both parcel post and freight addresses provided for delivery coordination. For government use, additional identifiers including IPD, DIC, DIST, ADV, and FC codes are included for logistics tracking. All provisions are governed by DLA’s authorized acquisition framework and technical standards, with the purchasing point of contact being James Green at the Defense Logistics Agency.
Defense Logistics Agency

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
FILLER CIM,
Solicitation # SPEFA3-26-T-0339
This contract, issued by the DLA Fleet Readiness Center Southeast under solicitation SPEFA3-26-T-0339, specifies the procurement of 16 units of filler component NSN 1680-LN-003-5337 with part number DA538L0897-247, for delivery to Jacksonville, Florida. Delivery is required within 84 days of contract award, with FOB destination terms, zero variance in quantity, and inspection and acceptance occurring upon arrival at the delivery point. The item has no shelf life requirement and does not require Unique Item Identification under DFARS 252.211-7003(c)(1)(i). Packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling, and palletization must adhere to DLA Packaging Requirements RP001, with all technical and quality requirements governed by the DLA Master List of Technical and Quality Requirements, which supersede any conflicting standards. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances accepted unless otherwise stipulated, and attribute levels are defined per specified verification levels or AQLs. The unit of issue is each, priced at $16.00 per unit for a total of $256.00. Shipping instructions distinguish between parcel post and freight addresses, both directing delivery to the Naval Air Station in Jacksonville, with an original required delivery date of August 5, 2026.
DLA FLEET READINESS CENTER SOUTHEAST

POSTED

about 22 hours ago

DEADLINE

in 8 days
View Details
NAICS: 488190
New
DIBBS
STUD, CONTINUOUS THREAD
Solicitation # SPE4A6-26-T-13QN
This contract is for the procurement of 511 units of a STUD, CONTINUOUS THREAD, identified by NSN 5307-01-626-3664 and part number NAS1454C6-0913, manufactured in compliance with the current revision of the non-government standard NAS1454 Revision 5 dated 06/30/2014. All hardware must meet the specified technical and quality requirements referenced through DLA’s Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition size. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are classified with corresponding verification levels or AQLs. The item must be packaged according to MIL-STD-2073-1E and marked per MIL-STD-129 with no special marking required, and palletization must adhere to DLA packaging requirements. Delivery is FOB origin with a required delivery date of July 28, 2026, and a lead time of 83 days, with no variance permitted in quantity. Inspection and acceptance occur at destination, and shipment must be directed to the DLA Distribution facility in New Cumberland, Pennsylvania, in accordance with DLA transportation procedures. The solicitation number is SPE4A6-26-T-13QN, with a response deadline of August 13, 2026, and the point of contact is Duane Watkins of the Department of Defense, ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
ELBOW, TUBE TO HOSE
Solicitation # SPEFA5-26-T-0978
The contract is for two units of an elbow fitting designated part number 8891-8D, which connects tube to hose and is identified by NSN 4730-LN-003-5506. The supplier, Eaton Aeroquip LLC, must deliver the items FOB destination within five days of order placement, with no tolerance for quantity variance. All items must comply with DLA’s Master List of Technical and Quality Requirements, which supersede other specifications. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated; critical, major, and minor attributes are verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Packaging must adhere to ASTM D3951 and MIL-STD-129 for marking and labeling, with palletization following DLA’s packaging standards. No shelf life applies to this item. Delivery is required to the Fleet Readiness Center East at Cherry Point, North Carolina, and shipment must occur via the fastest traceable means—parcel post is prohibited. The contract references solicitation SPEFA5-26-T-0978, with a required delivery date of August 7, 2026, and a unit price of $2.00 per piece for a total value of $4.00. Government-use identifiers and contact information, including point of contact Larry Kemp, are provided for administrative purposes.
Defense Logistics Agency

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
CAP R/H
Solicitation # SPEFA5-26-T-0979
This contract pertains to the procurement of three units of item NSN 1560-LL-NC0-8715 with part number 212-030-241-16 manufactured by Bell Textron Inc, designated as a critical application item with no shelf life requirement. All technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, which takes precedence over other standards, and include compliance with MIL-STD-130N for identification marking of U.S. military property. Sampling and inspection protocols must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes not explicitly defined are treated as major with corresponding verification levels or AQLs. Packaging must adhere to ASTM D3951 unless superseded by higher-priority DLA requirements, and all units must be marked and labeled in accordance with MIL-STD-129, palletized per RP001, and shipped as a single unit of issue. Delivery is FOB destination with a strict 43-day lead time from the contract award, and final inspection and acceptance occur at the destination site with no tolerance for quantity variance. The shipping address is Building 148, Bay C, Beachey Road, Cherry Point NC 28533-5040, while the parcel post address is PSC 8021, Cherry Point NC 28533-0021. The original required delivery date is October 20, 2026, and the contract unit price is $3.00 per unit for a total value of $9.00. The solicitation number is SPEFA5-26-T-0979, issued by the DLA Fleet Readiness Center with primary point of contact Larry Kemp, and the North American Industry Classification System code is 488190. Compliance with DoD unit of issue standards and accurate labeling per the provided DLA guidelines are mandatory for contract fulfillment.
DLA FLEET READINESS CENTER DLA PSC

POSTED

about 22 hours ago

DEADLINE

in 8 days
View Details
NAICS: 488190
New
DIBBS
FILAMENT, ADDITIVE MANU
Solicitation # SPE8E5-26-T-3834
This contract is for the procurement of 46 units of filament for additive manufacturing printers, identified by NSN 9330-01-696-2752 and part number 355-23101 from Stratasys Inc, under solicitation SPE8E5-26-T-3834. The requirement is a total small business set-aside with a delivery deadline of 167 days from the award date, with a mandatory ship date of February 1, 2027, and an original required delivery date of November 24, 2026. The material must be delivered FOB origin with zero variance in quantity, inspected and accepted at the destination. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, specifically TQ requirement IP025, and if not hazardous, must meet ASTM D3951 standards—however, DLA requirements supersede ASTM. All packaging and labeling must conform to MIL-STD-129, and palletization must follow DLA Packaging Requirements RP001. The shipment is to be sent to the DLA Distribution Depot in Tinker AFB, Oklahoma, with transportation instructions governed by DLAD Proc Notes C19 and C20. The unit price is $46.00 per unit, with a total contract value of $2,116.00, and the unit of issue is each (EA).
DEPOT OKLAHOMA

POSTED

about 22 hours ago

DEADLINE

in 12 days
View Details
NAICS: 488190
New
DIBBS
STAIN STEEL 17-4PH CRS
Solicitation # SPEFA5-26-T-0977
The contract specifies the procurement of 1 foot of 17-4PH stainless steel in cold rolled, condition A condition, with dimensions of 0.100 inch thick by 36 inches wide by 120 inches long, manufactured in strict compliance with AMS5604 Revision J. The material must be accompanied by a Certificate of Quality Conformance and packed in a manner that prevents damage during transit, adhering to DLA packaging standards, including MIL-STD-129 for labeling and ASTM D3951 for general packaging, with DLA Master List requirements taking precedence. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero defects required unless otherwise defined, and attributes must be verified per specified levels. Physical identification and metallurgical certification are mandatory, with CDRL-METALSCERT required and referenced in the Technical Data Package under QAP 13873. The material has no shelf life, and delivery is FOB destination within five days of contract award, with no tolerance for underdelivery but up to ten percent overdelivery permitted. Inspection and acceptance occur at the destination, and shipment must be sent via traceable freight only, not parcel post, to the Fleet Readiness Center East in Cherry Point, NC. The procurement is identified by NSN 9515-LN-003-1701 and purchase request 7017745743, with an original required delivery date of August 7, 2026, and a designated contract officer contact at DLA.
Defense Logistics Agency

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
PIN-RIVET
Solicitation # SPEFA3-26-T-0337
This contract solicits a single critical application item, a PIN-RIVET with NSN 5320-LN-003-4897 and part number HLT109AP6-7 from HI-SHEAR CORPORATION 73197, under solicitation SPEFA3-26-T-0337, issued by the Defense Logistics Agency for delivery to the Fleet Readiness Center Southeast in Jacksonville, Florida. The item is required in a quantity of one unit with a delivery deadline of five days after award, FOB destination, and inspection and acceptance will occur at the delivery point. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization governed by DLA Packaging Requirements RP001, while all DLA Master List of Technical and Quality Requirements take precedence over any general standards. The contract mandates stringent quality controls, including compliance with SAE AS9003 or ISO 9001 tailored to AS9003, and sampling methods aligned with MIL-STD-1916 or ASQ H1331, Table 1, requiring zero non-conformances unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively. The PIN-RIVET is subject to all relevant FAR and DFARS clauses, including safeguarding covered defense information, NIST SP 800-171 compliance under a specific deviation, prohibition of hexavalent chromium, Buy American Act and Berry Amendment thresholds reduced to $150,000, and cybersecurity reporting obligations. The contract is a small business set-aside, incorporates electronic submission via DIBBS with quotes due by August 13, 2026, and requires mandatory Safety Data Sheet submission prior to award; failure to provide it renders the offeror nonresponsible. Payment must be processed through WAWF with an invoice and receiving report required for fixed-price line items, and the vendor cannot use parcel post for shipment, instead shipping by the fastest traceable means. All representations and certifications must be maintained in the System for Award Management, and the contractor must affirm compliance with prohibitions on covered telecommunications equipment and controlled exports.
Defense Logistics Agency

POSTED

about 22 hours ago

DEADLINE

in 8 days
View Details
NAICS: 488190
New
DIBBS
HOSE ASSEMBLY
Solicitation # SPEFA5-26-T-0980
This contract pertains to the procurement of a hose assembly identified by NSN 1560-LL-NCB-5943 and part number M83796/1-J-150A, with a quantity of three units to be delivered within fifteen days of contract award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards unless otherwise specified. The product must be marked in accordance with MIL-STD-130N and packaged per ASTM D3951, with labeling and unit packaging strictly aligned with MIL-STD-129 and DLA Packaging Requirements. Sampling for quality assurance must follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required in the sample lot unless otherwise directed, and critical attributes are subject to the strictest verification levels. The hose assembly is designated as a critical application item with no shelf life requirement and must be delivered FOB destination, with inspection and acceptance occurring at the delivery point. Packaging must be palletized per DLA guidelines, and each unit must be labeled with the correct Unit of Issue and Quantity per Unit Pack as specified. Delivery is due by October 3, 2026, with the final destination being the Fleet Readiness Center at Cherry Point, North Carolina, and shipments must comply with all federal shipping and marking specifications.
DLA FLEET READINESS CENTER DLA PSC

POSTED

about 22 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → DLA FLEET READINESS CENTER SOUTHEAST

Same awarding agency

NAICS: 811411
New
DIBBS
Bar-Coding and Asset Marking ServicesThe contract requires the provision of MIL-STD-129 compliant bar-coding and durable asset marking services for defense-related items to ensure full traceability and adherence to Defense Logistics Agency standards. All marking must meet stringent durability and readability requirements to support logistics operations across the military supply chain, with a focus on accurate identification and inventory management through standardized bar-code formats. The work is expected to be performed at the DLA Fleet Readiness Center Southeast location in Jacksonville, Florida, with strict compliance to federal specifications for defense asset labeling. This subcontract opportunity is open for response until August 13, 2026, and is classified under NAICS code 811411, indicating it pertains to institutional and commercial laundry and dry-cleaning services, though the actual scope centers on asset marking precision rather than cleaning. The solicitation is issued by the Department of Defense through its DLA Fleet Readiness Center Southeast, and bidders must ensure all capabilities align with DLA’s operational needs for durable, high-visibility, and government-regulated asset identification systems. There is no set-aside designation specified and no point of contact provided, requiring prospective offerors to review the full solicitation via the provided DIBBS link for complete submission guidelines.
Home and Garden Equipment Repair and Maintenance

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 483110
New
DIBBS
Ocean Transportation and Defense Logistics ShippingThe contract seeks qualified entities to provide ocean transport services for defense-related cargo under the oversight of the DLA Fleet Readiness Center Southeast, ensuring full compliance with Department of Defense logistics standards and maritime regulations. Services must support the secure and timely movement of sensitive defense items, adhering to stringent protocol requirements for handling, documentation, and chain-of-custody throughout transit. Performance is required to be centered in Jacksonville, Florida, with all operations aligned to meet federal defense shipping mandates and DLA’s operational expectations. Subcontractors bidding on this opportunity must demonstrate proven experience in defense transportation, capacity to handle classified or controlled materials, and adherence to U.S. maritime and international shipping laws. The solicitation closes on August 13, 2026, and is categorized under NAICS code 483110 for ocean freight transport. While no set-aside provisions are specified, bidders are expected to meet all applicable security, certification, and regulatory conditions imposed by the Department of Defense. All proposals must be submitted through the designated DIBBS portal prior to the deadline to be considered.

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance for Controlled Technical Information (CTI)The contract requires the implementation and maintenance of cybersecurity safeguards in accordance with NIST Special Publication 800-171 to protect Controlled Technical Information handled on covered systems, ensuring full compliance with Defense Federal Acquisition Regulation Supplement clauses. The work is scoped to meet the specific cybersecurity requirements for systems processing CTI, with a focus on establishing, monitoring, and upholding the controls defined under NIST SP 800-171 to mitigate risks and ensure data integrity, confidentiality, and availability. This subcontract is part of a broader effort to secure sensitive technical data within the Department of Defense supply chain. Performance is expected to occur at the DLA Fleet Readiness Center Southeast location in Jacksonville, Florida, with a response deadline of August 13, 2026. The solicitation falls under NAICS code 541512 for Computer Systems Design Services and is classified as a subcontract under the Department of Defense. All activities must align with federal cybersecurity standards and be conducted to support the defense mission without delay or deviation from the prescribed compliance framework.
Computer Systems Design Services

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488210
New
DIBBS
Radioactive Materials Handling and TransportThe contract requires the handling, packaging, and transportation of low-level radioactive defense items in strict accordance with all applicable regulatory standards and safety protocols. All materials must be properly marked and documented to ensure compliance with federal guidelines for the movement of radioactive substances, with full accountability maintained throughout the supply chain. The work is focused on supporting defense operations and must be executed with precision to safeguard personnel, the public, and the environment. The contract is a subcontract under the Department of Defense, specifically managed by the DLA Fleet Readiness Center Southeast, with performance required at a facility in Jacksonville, Florida, ZIP code 32212-0103. It is classified under NAICS code 488210, indicating the scope involves support activities for transportation. The solicitation was posted on August 5, 2026, and responses are due by August 13, 2026, with no set-aside provisions specified. Interested parties must access the solicitation through the official DIBBS portal to obtain full technical requirements and submission instructions.
Support Activities for Rail Transportation

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 561990
New
DIBBS
Hazardous Materials Packaging and LabelingThe contract requires the proper packaging, labeling, and documentation of hazardous materials in strict alignment with MIL-STD-129, ASTM D3951, and OSHA HAZCOM standards, ensuring regulatory compliance across all phases of handling and transport. The work is to be performed at the designated place of performance in Jacksonville, Florida, with a response deadline of August 13, 2026, and the solicitation was posted on August 5, 2026. This is a subcontract opportunity under the NAICS code 561990, administered by the Department of Defense through the DLA Fleet Readiness Center Southeast, with no set-aside designation specified. All activities must adhere to federal hazardous materials regulations and defense logistics requirements, with full attention to safety, accuracy, and traceability in labeling and documentation processes.
All Other Support Services

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
Precision Machining of Defense ComponentsThe contract requires precision machining of defense hardware components, specifically trigger guards, in full compliance with military specifications and under the National Stock Number 1095LN0020479. The work must be performed to exacting defense standards, ensuring functionality, durability, and interoperability within military systems. The subcontract is issued by the DLA Fleet Readiness Center Southeast, a Department of Defense activity, and the performance location is designated as Jacksonville, Florida, with a ZIP code of 32212-0103. The North American Industry Classification System code 332722 indicates the work falls under machine shops and precision machining services. The solicitation was posted on August 5, 2026, and responses are due by August 13, 2026, with no set-aside provisions designated, meaning the opportunity is open to all qualifying vendors regardless of business size or certification. All work must align with the technical and quality requirements inherent to defense supply chains.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 999999
New
DIBBS
Unable to Decompose Subcontract OpportunitiesThe contract opportunity titled "Unable to Decompose Subcontract Opportunities" was posted on August 5, 2026, with a response deadline of August 13, 2026, and is categorized as a subcontract under the NAICS code 999999, which indicates an undefined or default classification. The solicitation originates from the DLA Fleet Readiness Center Southeast, a Department of Defense organization, with the place of performance located in Jacksonville, Florida, at ZIP code 32212-0103. No set-aside type, organization type, or point of contact information is specified, and critical system configurations required to identify subcontract details are missing, preventing further breakdown or analysis of potential opportunities. The official reference for this solicitation can be accessed through the DIBBS portal using the provided link, but no actionable subcontract data is currently available due to a configuration error.

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
LEVER (FPC)
Solicitation # SPEFA3-26-Q-0054
The contract pertains to the procurement of 8 units of a lever designated as FPC with part number 70209-21221-113 and NSN 1560-LLQJ59653, under solicitation SPEFA3-26-Q-0054, issued by the DLA Fleet Readiness Center Southeast. The contract specifies a firm fixed price with no variance allowed in quantity, requiring delivery within 30 days after award at destination with inspection and acceptance also occurring at the destination. The item is to be packaged in compliance with ASTM D3951, though all DLA Master List of Technical and Quality Requirements take precedence, and packaging must be marked and labeled per MIL-STD-129. Palletization must adhere to DLA Packaging Requirements, and unit of issue and packaging quantity must match contract specifications. Item Unique Identification is not required per the service customer’s request, with DFARS 252.211-7003(c)(1)(i) applicable. Sampling for quality verification follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stipulated; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The delivery address for freight shipping and parcel post is specified as the Fleet Readiness Center Southeast in Jacksonville, Florida, with the required delivery date set for August 4, 2026.
Hardware Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541330
New
DIBBS
Quality Assurance and Inspection Support
Engineering Services

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 541611
New
DIBBS
Barcoding and Military Logistics Marking
Administrative Management and General Management Consulting Services

POSTED

2 days ago

DEADLINE

in 6 days
View Details