TROUSERS, FLIGHT DEC

TROUSERS, FLIGHT DECK, Navy Blue, FLAME RESISTANT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ONTHE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATECONTROLS.
****
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
* RD005: Cybersecurity Maturity ModelCertification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) * RP001: DLA PACKAGING REQUIREMENTS FORPROCUREMENT
* RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS ANDNON-MANUFACTURERS)
* RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL REQUEST FOR VARIANCE (DEVIATION ORWAIVER)
* RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
* RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTEDSUPPLIES
* RQ018: CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION (AUG 2016) This item requires supply chain traceability documentation in accordance with DLA Directive (DLAD) Procurement Notes #C03 Contractor Retention of Supply ChainTraceability Documentation (AUG 2016)#. The full text of C03 can be found in the DLAD Procurement Notes on the Web at:http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. (End of TQ Requirement)
*
IP056: MERCURY OR MERCURY COMPOUNDSARE PROHIBITED IN PRESERVATION, PACKAGING, PACKING AND MARKING. * Article size NSN UPC XS-XSH 8415016676525 718020988535 XS-SH 8415016676537 718020817163 XS-RG 8415016676538718020673554 XS-LG 8415016676543 718020914374 S-XSH 8415016676549 718020774619 S-SH8415016676556 718020924885 S-RG 8415016676568 718020987880 S-LG 8415016676575 718020639659 M-XSH 8415016676885 718020889481 M-SH 8415016676887 718020976594 M-RG 8415016676888718020780726 M-LG 8415016676892 718020990392 M-XL 8415016676895 718020766782 M-XXL8415016676898 718020646800 L-SH 8415016676522 718020678504 L-RG 8415016677240 718020992426 L-LG 8415016677244 718020739298 L-XLG 8415016677249 718020812878 L-XXLG 8415016677255718020732992 XL-SH 8415016677288 718020683010 XL-RG 8415016677307 718020817408 XL-LG8415016677318 718020878300 XL-XLG 8415016677333 718020896151 XL-XXLG 8415016677337 718020958934 XXL-SH 8415016677350 718020609379 XXL-RG 8415016677368 718020989778 XXL-LG 8415016677376718020633923 XXL-XLG 8415016677382 718020742984 XXL-XXLG 8415016677386 718020939360
SPE1C1-27-Q-0165
SECTION B
SUPPLY/SERVICE: PGC: 00033 CONT'D
Trousers, Flight DECK, Flame Resistant Trousers should be made in accordance with NCTRF PD 11-07E, October 6, 2017.
Pattern Date: 11 August2021.
Standard sample of cloth Blue 3391, Piece No. 13225
Additional information NCTRF PD 11-07:
Page 1, 1.2.2, Under "Sizes":Add "Small-X Long (S-XL)".
PAGE 4 3.3.1.1: Delete and substitute: “3.3.1.1. Elasticized one-piece waistband. The elasticizedwaistband shall be a one-piece fold over band with double needle top stitch on the top and bottom length of the band. An alternatetwo-piece waistband that is stitched together along the length of band at the top/upper edge constructing an inner and outer band to form the waistband is permitted. The two-piece waistband shall follow the rest of the existing requirements to complete and attachthe waistband to the trousers. Each end shall fold back 2 (± 1/8) inches and be incorporated into the fly construction. The sidewaist elastic on each side of the trousers shall start 3 (± 1/8) inches forward of the side seam, continue past the side seam andend halfway between the outseam and the seat seam on the back panel. The finished relaxed measurement for the waistbandcircumference shall be 4 inches less than the extended finished waist circumference. The finished waistband shall measure 1-5/8 (±1/8) inches wide.”.
Page 5, 3.3.2, TABLE I: Delete and substitute: TABLE I. Fly slide fastener lengths (inches) Waist SizeTrouser Length: X-Short Short Regular Long X-Long XX-Long X-Small 6 6 1/2 7 7 1/2 Small 6-1/4 6 3/4 7-1/4 7 3/4 8-1/4 Medium 6 1/2 7 7 1/2 8 8 1/2 9 Large 7-1/4 7 3/4 8-1/4 8 3/49-1/4 X-Large 7 1/2 8 8 1/2 9 9 1/2 XX-Large 7 3/4 8-1/4 8 3/4 9-1/4 9 3/4
Tolerance: +/1/4 +/-1/4 +/1/4 +/1/4 +/1/4 +/1/4
PAGE 6, 3.4.4, Lines 1 and 2: Delete and substitute: "The trousers slide fastener shall conform to Type I, style 1 or 2 (continuous) or style 4 or 5 (preassembled), cam or semi-automatic locking, size 4, short tab pull ofA-A-55634."
Page 7, 3.4.7.1, Delete and substitute: “3.4.7.1 Combination label. Each pair of trousers shall have a combinationidentification and personal label conforming to Type VI, Classes 1 and 10 of MIL-DTL-32075. The label shall face the wearer of thefinished trousers. The label shall be sewn on the lower edge of the inside of the waistband, approximately 1/4 inch from the seatseam on the left side of the trousers as worn. When stitching the label to the bottom of the waistband, care shall be taken so there is adequate space to accommodate personnel to write their name on the label. All printing shall be legible throughout the life ofthe trousers, which shall be a minimum of 50 washings. See Figure 2..
NAME:_______________________________________________________ TROUSERS, FLIGHT DECK, FLAME RESISTANT Fiber content: Contract #:SPE100-00-0-0000 (example) Contractor Name: Name of manufacturer (if different than contractor): Lot number:
3.4.7.1.1 Instructionlabel. Each pair of trousers shall have an instruction/laundering label conforming to Type VI, Class 3 of MIL-DTL-32075. The top ofthe label shall be sewn to the left outseam of the trousers as worn and positioned approximately 4 inches below the bottom of thewaistband. See Figure 2. Stitching shall not go through the inscription. The label shall face the wearer on the finished trousers. The label shall contain the following information:
LAUNDERING: DETERGENT ONLY WASH UP TO 165°F (74° C) NO CHLORINE OR HYDROGENPEROXIDE BLEACH EITHER SEPARATELY OR IN DETERGENTS NO SOFTENERS OR STARCH FAILURE TO LAUNDER PROPERLY COULD ADVERSELY AFFECTTHE FLAME RESISTANCE OF THE FABRIC OR FOLLOW SHIPBOARD WASH FORMULA ii
DO NOT REMOVE THIS LABEL.
Page 8, “3.4.7.2 Size label. Each pair of trousers shall have a size label sewn into the lower edge of the inside of the waistband positioned next to the combination identification/personal label towards the outseam
SPE1C1-27-Q-0165
SECTION B
SUPPLY/SERVICE: PGC: 00033 CONT'D
on the left side of trousers as worn leaving approximately 1/8-inch separationbetween the two labels conforming to Type VI, Class 2 of MIL-DTL-32075. The label shall indicate size and stock number as shownbelow. All of the printing shall be legible throughout the life of the garment. See Figure 2.
PAGE 9 3.5.1, Table III: Delete and substitute:
“TABLE III. Pattern list Material Pattern Computer Cut Parts NomenclatureNomenclature 1/ Basic material (3.4.1) Inseam Gusset FDT-B-INSM-GUSSET Cut 1 Back FDT-B-BACK Cut 2 Seat Patch FDT-B-SEAT-PATCH Cut 2 Waistband FDT-B-WAISTBAND Cut 1 Waistband Alternate FDT-B-WB-ALT Cut 2 Belt Loop FDT-B-BELT-LOOP Cut 1 Front 1 FDT-B-FRONT Cut 2 Fly Right FDT-B-FLY-RT Cut 1 Fly Left FDT-B-FLY-LFT Cut 1 Knee Patch FDT-B-KNEE-PATCH Cut 2
Fusible Interlining (3.4.2) Fuse Waistband Left FDT-F-WB-INTRLNG-LFT Cut 1 FuaseWaistbland Alternate Left FDT-F-WB-ALT-INTRLNG-LFT Cut 2 Fuse Waistband Center BackFDT-F-WB-INTRLING-CB Cut 1 Fuse Waistband Alternate Center Back FDT-F-WB-ALT-INTRLING-CB Cut 2 Fuse WaistbandRight FDT-F-WB-INTRLING-RT Cut 1 Fuse Waistband Alternate Right FDT-F-WB-ALT-INTRLING-RT Cut 2 Fuse FlyLeft FDT-F-FLY-LFT Cut 1 Templates Back FDT-T-BACK Template Waistband FDT-T-WAISTBAND Template Waistband Alternate Inner FDT-T-WB-ALT-INNR Template Waistband Alternate Outer FDT-T-WB-ALT-OUTER Template Front FDT-T-FRONT Template
Pages 10 and 11, 3.8,TABLE VI: Delete and substitute: TABLE VI. Finished dimensions (inches). SIZE X-SHORT SHORT REGULAR LONG X-LONG XX-LONG TOL. 1/2 Waist Relaxed: X-Small 12 12 12 12 ---1/4 Small 14 14 14 14 14 -+1/2 Medium 16 16 16 1616 16 Large -18 18 18 18 18 X-Large -20 20 20 20 20 XX-Large -22 22 22 22 22
1/2 Waist #Stretched X-Small,(min) 14 14 14 14 ---1/4 Small(min) 16 16 16 16 16 -+1/2 Medium(min) 18 18 18 18 18 18 Large(min) -20 20 20 20 20 X-Large(min) -22 22 22 22 22 XX-Large(min) -24 24 24 24 24
Inseam: X-Small 28-3/4 30-3/4 32-3/4 34-3/4 --+/Small 28-3/4 30-3/4 32-3/4 34-3/4 36-3/4 -3/4Medium 28-3/4 30-3/4 32-3/4 34-3/4 36-3/4 38-3/4 Large -30-3/4 32-3/4 34-3/4 36-3/4 38-3/4 X-Large -30-3/4 32-3/4 34-3/4 36-3/4 38-3/4 XX-Large -30 3/4 32-3/4 34-3/4 36-3/4 38-3/4
Outseam: X-Small 37-3/4 40-1/4 42-3/445-1/4 --+/Small 38-1/4 40-3/4 43-1/4 45-3/4 48-1/4 -3/4 Medium 38-3/4 41-1/4 43-3/4 46-1/448-3/4 51-1/4 Large -41-3/4 44-1/4 46-3/4 49-1/4 51-3/4 X-Large -42-1/4 44-3/4 47-1/4 49-3/4 52-1/4 XX-Large-42-3/4 45-1/4 47-3/4 50-1/4 52-3/4
Bottom leg opening: X-Small 8-1/2 8-1/2 8-1/2 8-1/2 --+/Small 8-1/2 8-1/2 8-1/2 8-1/2 8-1/2 -1/2 Medium 8-7/8 8-7/8 8-7/8 8-7/8 8-7/8 8-7/8 Large -8-7/88-7/8 8-7/8 8-7/8 8-7/8 X-Large -9-1/4 9-1/4 9-1/4 9-1/4 9-1/4 XX-Large -9-1/4 9-1/4 9-1/4 9-1/49-1/4
SPE1C1-27-Q-0165
SECTION B
SUPPLY/SERVICE: PGC: 00033 CONT'D
Page 19, Delete #FIGURE 2 # Back View Trouser# and substitute new #FIGURE 2 # Trousers, back view with label placement#.See NCTRF-013-19 or word doc tech data for figure.
ADDITIONAL INFORMATION FOR ANSI/ASQC Z1.4: NOTE: THE MOST RECENT VERSION OFTHIS DOCUMENT SHOULD BE USED. APPLICATION FOR COPIES SHOULD BE ADDRESSED TO: AMERICAN SOCIETY FOR QUALITY 600 NORTH PLANKINTONAVENUE MILWAUKEE, WISCONSIN 53203
(Ref. T0795 May 17, 2006)
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT.
0001 8415-01-667-6538 240.000 PR $ _______________ $ ______________
TROUSERS,FLIGHT
DEC
PRICING TERMS: Firm Fixed Price
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
FOB: DESTINATION DELIVERY DATE: 163 DAYS ADO
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:33 CLNG/DRY:0 PRESV MAT:00 WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNNTHKNESS:0 UNIT CONT:A1 OPI:O PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:00 -00 No specialmarking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
Packing of the trousers shall be in accordance with Barrier Material, Greaseproof, Waterproof, Flexible, Heat-Sealable; MIL-PRF-121G, Type II which is necessaryto provide protection from exposure to the extremes of the naval aviation environment.
PACKING: 20 TROUSERS OF ONE SIZE AND COLORONLY, SHALL BE PACKED INTO A SHIPPING CONTAINER.
AS A MINIMUM, FIBERBOARD SHIPPING CONTAINER SHALL CONFORM TO ASTMD-5118, TYPECF, STYLE RSC, GRADE 275, VARIETY SW, CLASS DOMESTIC, WITH A DOUBLE WALL LINER. ANY COMMERCIAL CLOSURE METHOD CITED INASTM-D-1974 IS ACCEPTABLE EXCEPT STAPLING.
PACKAGING SHALL BE AS PER MIL-STD-129, MIL-STD-147. Lot numbering shall be in accordance with MIL-STD-129 AND DLA Troop Support Clothing <(>&<)> Textiles Additional Quality Assurance Requirements.
PARCEL POST ADDRESS:
UY0157
PECKHAM INC
OCIE NORTH 3PL
5408 W GRAND RIVER AVE BLDG B
LANSING MI 48906
SPE1C1-27-Q-0165
SECTION B
SUPPLY/SERVICE: PGC: 00033 CONT'D
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND
CONTRACT
FREIGHT SHIPPING ADDRESS:
UY0157
PECKHAM INC
OCIE 3PL
5408 W GRAND RIVER AVE BLDG B
LANSING MI 48906
US
GOVT USE
External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date. 0001 7019054772 0001 N/A N/A N/A 06/24/2027

SUPPLIES/SERVICES: PGC: 00033
ITEM DESCRIPTION:
TROUSERS, FLIGHT DECK, Navy Blue, FLAME RESISTANT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ONTHE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATECONTROLS.
****
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
* RD005: Cybersecurity Maturity ModelCertification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) * RP001: DLA PACKAGING REQUIREMENTS FORPROCUREMENT
* RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS ANDNON-MANUFACTURERS)
* RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL REQUEST FOR VARIANCE (DEVIATION ORWAIVER)
* RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
*
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTEDSUPPLIES
*
RQ018: CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION (AUG 2016)
This item requires supply chain traceability documentation in accordance with DLA Directive (DLAD) Procurement Notes #C03 Contractor Retention of Supply ChainTraceability Documentation (AUG 2016)#. The full text of C03 can be found in the DLAD Procurement Notes on the Web at:http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. (End of TQ Requirement)
*
IP056: MERCURY OR MERCURY COMPOUNDSARE PROHIBITED IN PRESERVATION, PACKAGING, PACKING AND MARKING.
SPE1C1-27-Q-0165
SECTION B
SUPPLY/SERVICE: PGC: 00033 CONT'D
*
Article size NSN UPC XS-XSH 8415016676525 718020988535 XS-SH 8415016676537 718020817163 XS-RG 8415016676538718020673554 XS-LG 8415016676543 718020914374 S-XSH 8415016676549 718020774619 S-SH8415016676556 718020924885 S-RG 8415016676568 718020987880 S-LG 8415016676575 718020639659 M-XSH 8415016676885 718020889481 M-SH 8415016676887 718020976594 M-RG 8415016676888718020780726 M-LG 8415016676892 718020990392 M-XL 8415016676895 718020766782 M-XXL8415016676898 718020646800 L-SH 8415016676522 718020678504 L-RG 8415016677240 718020992426 L-LG 8415016677244 718020739298 L-XLG 8415016677249 718020812878 L-XXLG 8415016677255718020732992 XL-SH 8415016677288 718020683010 XL-RG 8415016677307 718020817408 XL-LG8415016677318 718020878300 XL-XLG 8415016677333 718020896151 XL-XXLG 8415016677337 718020958934 XXL-SH 8415016677350 718020609379 XXL-RG 8415016677368 718020989778 XXL-LG 8415016677376718020633923 XXL-XLG 8415016677382 718020742984 XXL-XXLG 8415016677386 718020939360
Trousers, Flight DECK, Flame Resistant Trousers should be made in accordance with NCTRF PD 11-07E, October 6, 2017.
Pattern Date: 11 August2021.
Standard sample of cloth Blue 3391, Piece No. 13225
Additional information NCTRF PD 11-07:
Page 1, 1.2.2, Under "Sizes":Add "Small-X Long (S-XL)".
PAGE 4 3.3.1.1: Delete and substitute: “3.3.1.1. Elasticized one-piece waistband. The elasticizedwaistband shall be a one-piece fold over band with double needle top stitch on the top and bottom length of the band. An alternatetwo-piece waistband that is stitched together along the length of band at the top/upper edge constructing an inner and outer band to form the waistband is permitted. The two-piece waistband shall follow the rest of the existing requirements to complete and attachthe waistband to the trousers. Each end shall fold back 2 (± 1/8) inches and be incorporated into the fly construction. The sidewaist elastic on each side of the trousers shall start 3 (± 1/8) inches forward of the side seam, continue past the side seam andend halfway between the outseam and the seat seam on the back panel. The finished relaxed measurement for the waistbandcircumference shall be 4 inches less than the extended finished waist circumference. The finished waistband shall measure 1-5/8 (±1/8) inches wide.”.
Page 5, 3.3.2, TABLE I: Delete and substitute: TABLE I. Fly slide fastener lengths (inches) Waist SizeTrouser Length: X-Short Short Regular Long X-Long XX-Long X-Small 6 6 1/2 7 7 1/2 Small 6-1/4 6 3/4 7-1/4 7 3/4 8-1/4 Medium 6 1/2 7 7 1/2 8 8 1/2 9 Large 7-1/4 7 3/4 8-1/4 8 3/49-1/4 X-Large 7 1/2 8 8 1/2 9 9 1/2 XX-Large 7 3/4 8-1/4 8 3/4 9-1/4 9 3/4
Tolerance: +/1/4 +/-1/4 +/1/4 +/1/4 +/1/4 +/1/4
PAGE 6, 3.4.4, Lines 1 and 2: Delete and substitute: "The trousers slide fastener shall conform to Type I, style 1 or 2 (continuous) or style 4 or 5 (preassembled), cam or semi-automatic locking, size 4, short tab pull ofA-A-55634."
Page 7, 3.4.7.1, Delete and substitute: “3.4.7.1 Combination label. Each pair of trousers shall have a combinationidentification and personal label conforming to Type VI, Classes 1 and 10 of MIL-DTL-32075. The label shall face the wearer of thefinished trousers. The label shall be sewn on the lower edge of the inside of the waistband, approximately 1/4 inch from the seatseam on the left side of the trousers as worn. When stitching the label to the
SPE1C1-27-Q-0165
SECTION B
SUPPLY/SERVICE: PGC: 00033 CONT'D
bottom of the waistband, care shall be taken so there is adequate space to accommodate personnel to write their name on the label. All printing shall be legible throughout the life ofthe trousers, which shall be a minimum of 50 washings. See Figure 2..
NAME:_______________________________________________________ TROUSERS, FLIGHT DECK, FLAME RESISTANT Fiber content: Contract #:SPE100-00-0-0000 (example) Contractor Name: Name of manufacturer (if different than contractor): Lot number:
3.4.7.1.1 Instructionlabel. Each pair of trousers shall have an instruction/laundering label conforming to Type VI, Class 3 of MIL-DTL-32075. The top ofthe label shall be sewn to the left outseam of the trousers as worn and positioned approximately 4 inches below the bottom of thewaistband. See Figure 2. Stitching shall not go through the inscription. The label shall face the wearer on the finished trousers. The label shall contain the following information:
LAUNDERING: DETERGENT ONLY WASH UP TO 165°F (74° C) NO CHLORINE OR HYDROGENPEROXIDE BLEACH EITHER SEPARATELY OR IN DETERGENTS NO SOFTENERS OR STARCH FAILURE TO LAUNDER PROPERLY COULD ADVERSELY AFFECTTHE FLAME RESISTANCE OF THE FABRIC OR FOLLOW SHIPBOARD WASH FORMULA ii
DO NOT REMOVE THIS LABEL.
Page 8, “3.4.7.2 Size label. Each pair of trousers shall have a size label sewn into the lower edge of the inside of the waistband positioned next to the combination identification/personal label towards the outseam on the left side of trousers as worn leaving approximately 1/8-inch separationbetween the two labels conforming to Type VI, Class 2 of MIL-DTL-32075. The label shall indicate size and stock number as shownbelow. All of the printing shall be legible throughout the life of the garment. See Figure 2.
PAGE 9 3.5.1, Table III: Delete and substitute:
“TABLE III. Pattern list Material Pattern Computer Cut Parts NomenclatureNomenclature 1/ Basic material (3.4.1) Inseam Gusset FDT-B-INSM-GUSSET Cut 1 Back FDT-B-BACK Cut 2 Seat Patch FDT-B-SEAT-PATCH Cut 2 Waistband FDT-B-WAISTBAND Cut 1 Waistband Alternate FDT-B-WB-ALT Cut 2 Belt Loop FDT-B-BELT-LOOP Cut 1 Front 1 FDT-B-FRONT Cut 2 Fly Right FDT-B-FLY-RT Cut 1 Fly Left FDT-B-FLY-LFT Cut 1 Knee Patch FDT-B-KNEE-PATCH Cut 2
Fusible Interlining (3.4.2) Fuse Waistband Left FDT-F-WB-INTRLNG-LFT Cut 1 FuaseWaistbland Alternate Left FDT-F-WB-ALT-INTRLNG-LFT Cut 2 Fuse Waistband Center BackFDT-F-WB-INTRLING-CB Cut 1 Fuse Waistband Alternate Center Back FDT-F-WB-ALT-INTRLING-CB Cut 2 Fuse WaistbandRight FDT-F-WB-INTRLING-RT Cut 1 Fuse Waistband Alternate Right FDT-F-WB-ALT-INTRLING-RT Cut 2 Fuse FlyLeft FDT-F-FLY-LFT Cut 1 Templates Back FDT-T-BACK Template Waistband FDT-T-WAISTBAND Template Waistband Alternate Inner FDT-T-WB-ALT-INNR Template Waistband Alternate Outer FDT-T-WB-ALT-OUTER Template Front FDT-T-FRONT Template
Pages 10 and 11, 3.8,TABLE VI: Delete and substitute: TABLE VI. Finished dimensions (inches). SIZE X-SHORT SHORT REGULAR LONG X-LONG XX-LONG TOL. 1/2 Waist Relaxed:
SPE1C1-27-Q-0165
SECTION B
SUPPLY/SERVICE: PGC: 00033 CONT'D
X-Small 12 12 12 12 ---1/4 Small 14 14 14 14 14 -+1/2 Medium 16 16 16 1616 16 Large -18 18 18 18 18 X-Large -20 20 20 20 20 XX-Large -22 22 22 22 22
1/2 Waist #Stretched X-Small,(min) 14 14 14 14 ---1/4 Small(min) 16 16 16 16 16 -+1/2 Medium(min) 18 18 18 18 18 18 Large(min) -20 20 20 20 20 X-Large(min) -22 22 22 22 22 XX-Large(min) -24 24 24 24 24
Inseam: X-Small 28-3/4 30-3/4 32-3/4 34-3/4 --+/Small 28-3/4 30-3/4 32-3/4 34-3/4 36-3/4 -3/4Medium 28-3/4 30-3/4 32-3/4 34-3/4 36-3/4 38-3/4 Large -30-3/4 32-3/4 34-3/4 36-3/4 38-3/4 X-Large -30-3/4 32-3/4 34-3/4 36-3/4 38-3/4 XX-Large -30 3/4 32-3/4 34-3/4 36-3/4 38-3/4
Outseam: X-Small 37-3/4 40-1/4 42-3/445-1/4 --+/Small 38-1/4 40-3/4 43-1/4 45-3/4 48-1/4 -3/4 Medium 38-3/4 41-1/4 43-3/4 46-1/448-3/4 51-1/4 Large -41-3/4 44-1/4 46-3/4 49-1/4 51-3/4 X-Large -42-1/4 44-3/4 47-1/4 49-3/4 52-1/4 XX-Large-42-3/4 45-1/4 47-3/4 50-1/4 52-3/4
Bottom leg opening: X-Small 8-1/2 8-1/2 8-1/2 8-1/2 --+/Small 8-1/2 8-1/2 8-1/2 8-1/2 8-1/2 -1/2 Medium 8-7/8 8-7/8 8-7/8 8-7/8 8-7/8 8-7/8 Large -8-7/88-7/8 8-7/8 8-7/8 8-7/8 X-Large -9-1/4 9-1/4 9-1/4 9-1/4 9-1/4 XX-Large -9-1/4 9-1/4 9-1/4 9-1/49-1/4
Page 19, Delete #FIGURE 2 # Back View Trouser# and substitute new #FIGURE 2 # Trousers, back view with label placement#.See NCTRF-013-19 or word doc tech data for figure.
ADDITIONAL INFORMATION FOR ANSI/ASQC Z1.4: NOTE: THE MOST RECENT VERSION OFTHIS DOCUMENT SHOULD BE USED. APPLICATION FOR COPIES SHOULD BE ADDRESSED TO: AMERICAN SOCIETY FOR QUALITY 600 NORTH PLANKINTONAVENUE MILWAUKEE, WISCONSIN 53203
(Ref. T0795 May 17, 2006)
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT.
0002 8415-01-667-6568 60.000 PR $ _______________ $ ______________
TROUSERS,FLIGHT
DEC
PRICING TERMS: Firm Fixed Price
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
FOB: DESTINATION DELIVERY DATE: 163 DAYS ADO
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:33 CLNG/DRY:0 PRESV MAT:00 WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNNTHKNESS:0 UNIT CONT:A1 OPI:O PACK CODE:U
SPE1C1-27-Q-0165
SECTION B
SUPPLY/SERVICE: PGC: 00033 CONT'D
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No specialmarking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
Packing of the trousers shall be in accordance with Barrier Material, Greaseproof, Waterproof, Flexible, Heat-Sealable; MIL-PRF-121G, Type II which is necessaryto provide protection from exposure to the extremes of the naval aviation environment.
PACKING: 20 TROUSERS OF ONE SIZE AND COLORONLY, SHALL BE PACKED INTO A SHIPPING CONTAINER.
AS A MINIMUM, FIBERBOARD SHIPPING CONTAINER SHALL CONFORM TO ASTMD-5118, TYPECF, STYLE RSC, GRADE 275, VARIETY SW, CLASS DOMESTIC, WITH A DOUBLE WALL LINER. ANY COMMERCIAL CLOSURE METHOD CITED INASTM-D-1974 IS ACCEPTABLE EXCEPT STAPLING.
PACKAGING SHALL BE AS PER MIL-STD-129, MIL-STD-147. Lot numbering shall be in accordance with MIL-STD-129 AND DLA Troop Support Clothing <(>&<)> Textiles Additional Quality Assurance Requirements. PKGING DATA -MIL-STD-2073-1E QUP:001 PRES MTHD:33 CLNG/DRY:0 PRESV MAT:00 WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0 UNIT CONT:10OPI:O PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATIONSHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
Packing of the trousers shall be in accordance withBarrier Material, Greaseproof, Waterproof, Flexible, Heat-Sealable; MIL-PRF-121G, Type II which is necessary to provide protectionfrom exposure to the extremes of the naval aviation environment.
PACKING: 20 TROUSERS OF ONE SIZE AND COLOR ONLY, SHALL BE PACKEDINTO A SHIPPING CONTAINER.
AS A MINIMUM, FIBERBOARD SHIPPING CONTAINER SHALL CONFORM TO ASTMD-5118, TYPE CF, STYLE RSC, GRADE275, VARIETY SW, CLASS DOMESTIC, WITH A DOUBLE WALL LINER. ANY COMMERCIAL CLOSURE METHOD CITED IN ASTM-D-1974 IS ACCEPTABLE EXCEPTSTAPLING.
PACKAGING SHALL BE AS PER MIL-STD-129, MIL-STD-147. Lot numbering shall be in accordance with MIL-STD-129 AND DLA TroopSupport Clothing <(>&<)> Textiles Additional Quality Assurance Requirements.
PARCEL POST ADDRESS:
UY0157
PECKHAM INC
OCIE NORTH 3PL
5408 W GRAND RIVER AVE BLDG B
LANSING MI 48906
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND
CONTRACT
FREIGHT SHIPPING ADDRESS:
UY0157
PECKHAM INC
OCIE 3PL
5408 W GRAND RIVER AVE BLDG B
LANSING MI 48906
US
SPE1C1-27-Q-0165
SECTION B
SUPPLY/SERVICE: PGC: 00033 CONT'D
GOVT USE
External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date. 0002 7019054772 0002 N/A N/A N/A 06/24/2027

SUPPLIES/SERVICES: PGC: 00033
ITEM DESCRIPTION:
TROUSERS, FLIGHT DECK, Navy Blue, FLAME RESISTANT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ONTHE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATECONTROLS.
****
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
* RD005: Cybersecurity Maturity ModelCertification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) * RP001: DLA PACKAGING REQUIREMENTS FORPROCUREMENT
* RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS ANDNON-MANUFACTURERS)
* RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL REQUEST FOR VARIANCE (DEVIATION ORWAIVER)
* RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
* RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTEDSUPPLIES
* RQ018: CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION (AUG 2016) This item requires supply chain traceability documentation in accordance with DLA Directive (DLAD) Procurement Notes #C03 Contractor Retention of Supply ChainTraceability Documentation (AUG 2016)#. The full text of C03 can be found in the DLAD Procurement Notes on the Web at:http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. (End of TQ Requirement)
*
IP056: MERCURY OR MERCURY COMPOUNDSARE PROHIBITED IN PRESERVATION, PACKAGING, PACKING AND MARKING. * Article size NSN UPC XS-XSH 8415016676525 718020988535 XS-SH 8415016676537 718020817163 XS-RG 8415016676538718020673554 XS-LG 8415016676543 718020914374 S-XSH 8415016676549 718020774619 S-SH8415016676556 718020924885 S-RG 8415016676568 718020987880 S-LG 8415016676575 718020639659 M-XSH 8415016676885 718020889481 M-SH 8415016676887 718020976594 M-RG 8415016676888718020780726 M-LG 8415016676892 718020990392 M-XL 8415016676895 718020766782 M-XXL8415016676898 718020646800 L-SH 8415016676522 718020678504 L-RG 8415016677240 718020992426
SPE1C1-27-Q-0165
SECTION B
SUPPLY/SERVICE: PGC: 00033 CONT'D
L-LG 8415016677244 718020739298
L-XLG 8415016677249 718020812878
L-XXLG 8415016677255718020732992
XL-SH 8415016677288 718020683010
XL-RG 8415016677307 718020817408
XL-LG8415016677318 718020878300
XL-XLG 8415016677333 718020896151
XL-XXLG 8415016677337 718020958934
XXL-SH 8415016677350 718020609379
XXL-RG 8415016677368 718020989778
XXL-LG 8415016677376718020633923
XXL-XLG 8415016677382 718020742984
XXL-XXLG 8415016677386 718020939360
Trousers, Flight DECK, Flame Resistant Trousers should be made in accordance with NCTRF PD 11-07E, October 6, 2017.
Pattern Date: 11 August2021.
Standard sample of cloth Blue 3391, Piece No. 13225
Additional information NCTRF PD 11-07:
Page 1, 1.2.2, Under "Sizes":Add "Small-X Long (S-XL)".
PAGE 4 3.3.1.1: Delete and substitute: “3.3.1.1. Elasticized one-piece waistband. The elasticizedwaistband shall be a one-piece fold over band with double needle top stitch on the top and bottom length of the band. An alternatetwo-piece waistband that is stitched together along the length of band at the top/upper edge constructing an inner and outer band to form the waistband is permitted. The two-piece waistband shall follow the rest of the existing requirements to complete and attachthe waistband to the trousers. Each end shall fold back 2 (± 1/8) inches and be incorporated into the fly construction. The sidewaist elastic on each side of the trousers shall start 3 (± 1/8) inches forward of the side seam, continue past the side seam andend halfway between the outseam and the seat seam on the back panel. The finished relaxed measurement for the waistbandcircumference shall be 4 inches less than the extended finished waist circumference. The finished waistband shall measure 1-5/8 (±1/8) inches wide.”.
Page 5, 3.3.2, TABLE I: Delete and substitute: TABLE I. Fly slide fastener lengths (inches) Waist SizeTrouser Length: X-Short Short Regular Long X-Long XX-Long X-Small 6 6 1/2 7 7 1/2 Small 6-1/4 6 3/4 7-1/4 7 3/4 8-1/4 Medium 6 1/2 7 7 1/2 8 8 1/2 9 Large 7-1/4 7 3/4 8-1/4 8 3/49-1/4 X-Large 7 1/2 8 8 1/2 9 9 1/2 XX-Large 7 3/4 8-1/4 8 3/4 9-1/4 9 3/4
Tolerance: +/1/4 +/-1/4 +/1/4 +/1/4 +/1/4 +/1/4
PAGE 6, 3.4.4, Lines 1 and 2: Delete and substitute: "The trousers slide fastener shall conform to Type I, style 1 or 2 (continuous) or style 4 or 5 (preassembled), cam or semi-automatic locking, size 4, short tab pull ofA-A-55634."
Page 7, 3.4.7.1, Delete and substitute: “3.4.7.1 Combination label. Each pair of trousers shall have a combinationidentification and personal label conforming to Type VI, Classes 1 and 10 of MIL-DTL-32075. The label shall face the wearer of thefinished trousers. The label shall be sewn on the lower edge of the inside of the waistband, approximately 1/4 inch from the seatseam on the left side of the trousers as worn. When stitching the label to the bottom of the waistband, care shall be taken so there is adequate space to accommodate personnel to write their name on the label. All printing shall be legible throughout the life ofthe trousers, which shall be a minimum of 50 washings. See Figure 2..
NAME:_______________________________________________________ TROUSERS, FLIGHT DECK, FLAME RESISTANT Fiber content: Contract #:SPE100-00-0-0000 (example) Contractor Name: Name of manufacturer (if different than contractor): Lot number:
3.4.7.1.1 Instructionlabel. Each pair of trousers shall have an instruction/laundering label conforming to Type VI, Class 3 of MIL-DTL-32075. The top ofthe label shall be sewn to the left outseam of the trousers as worn and positioned approximately 4 inches below the bottom of thewaistband. See Figure 2. Stitching shall not go through the inscription. The label shall face the wearer on the finished trousers. The label shall contain the following information:
LAUNDERING: DETERGENT ONLY WASH UP TO 165°F (74° C)
SPE1C1-27-Q-0165
SECTION B
SUPPLY/SERVICE: PGC: 00033 CONT'D
NO CHLORINE OR HYDROGENPEROXIDE BLEACH
EITHER SEPARATELY OR IN DETERGENTS
NO SOFTENERS OR STARCH
FAILURE TO LAUNDER PROPERLY
COULD ADVERSELY AFFECTTHE
FLAME RESISTANCE OF THE FABRIC
OR
FOLLOW SHIPBOARD WASH FORMULA ii
DO NOT REMOVE THIS LABEL.
Page 8, “3.4.7.2 Size label. Each pair of trousers shall have a size label sewn into the lower edge of the inside of the waistband positioned next to the combination identification/personal label towards the outseam on the left side of trousers as worn leaving approximately 1/8-inch separationbetween the two labels conforming to Type VI, Class 2 of MIL-DTL-32075. The label shall indicate size and stock number as shownbelow. All of the printing shall be legible throughout the life of the garment. See Figure 2.
PAGE 9 3.5.1, Table III: Delete and substitute:
“TABLE III. Pattern list Material Pattern Computer Cut Parts NomenclatureNomenclature 1/ Basic material (3.4.1) Inseam Gusset FDT-B-INSM-GUSSET Cut 1 Back FDT-B-BACK Cut 2 Seat Patch FDT-B-SEAT-PATCH Cut 2 Waistband FDT-B-WAISTBAND Cut 1 Waistband Alternate FDT-B-WB-ALT Cut 2 Belt Loop FDT-B-BELT-LOOP Cut 1 Front 1 FDT-B-FRONT Cut 2 Fly Right FDT-B-FLY-RT Cut 1 Fly Left FDT-B-FLY-LFT Cut 1 Knee Patch FDT-B-KNEE-PATCH Cut 2
Fusible Interlining (3.4.2) Fuse Waistband Left FDT-F-WB-INTRLNG-LFT Cut 1 FuaseWaistbland Alternate Left FDT-F-WB-ALT-INTRLNG-LFT Cut 2 Fuse Waistband Center BackFDT-F-WB-INTRLING-CB Cut 1 Fuse Waistband Alternate Center Back FDT-F-WB-ALT-INTRLING-CB Cut 2 Fuse WaistbandRight FDT-F-WB-INTRLING-RT Cut 1 Fuse Waistband Alternate Right FDT-F-WB-ALT-INTRLING-RT Cut 2 Fuse FlyLeft FDT-F-FLY-LFT Cut 1 Templates Back FDT-T-BACK Template Waistband FDT-T-WAISTBAND Template Waistband Alternate Inner FDT-T-WB-ALT-INNR Template Waistband Alternate Outer FDT-T-WB-ALT-OUTER Template Front FDT-T-FRONT Template
Pages 10 and 11, 3.8,TABLE VI: Delete and substitute: TABLE VI. Finished dimensions (inches). SIZE X-SHORT SHORT REGULAR LONG X-LONG XX-LONG TOL. 1/2 Waist Relaxed: X-Small 12 12 12 12 ---1/4 Small 14 14 14 14 14 -+1/2 Medium 16 16 16 1616 16 Large -18 18 18 18 18 X-Large -20 20 20 20 20 XX-Large -22 22 22 22 22
1/2 Waist #Stretched X-Small,(min) 14 14 14 14 ---1/4 Small(min) 16 16 16 16 16 -+1/2 Medium(min) 18 18 18 18 18 18 Large(min) -20 20 20 20 20 X-Large(min) -22 22 22 22 22 XX-Large(min) -24 24 24 24 24
Inseam: X-Small 28-3/4 30-3/4 32-3/4 34-3/4 --+/Small 28-3/4 30-3/4 32-3/4 34-3/4 36-3/4 -3/4Medium 28-3/4 30-3/4 32-3/4 34-3/4 36-3/4 38-3/4 Large -30-3/4 32-3/4 34-3/4 36-3/4 38-3/4 X-Large -30-3/4 32-3/4 34-3/4 36-3/4 38-3/4 XX-Large -30 3/4 32-3/4 34-3/4 36-3/4 38-3/4
SPE1C1-27-Q-0165
SECTION B
SUPPLY/SERVICE: PGC: 00033 CONT'D
Outseam: X-Small 37-3/4 40-1/4 42-3/445-1/4 --+/Small 38-1/4 40-3/4 43-1/4 45-3/4 48-1/4 -3/4 Medium 38-3/4 41-1/4 43-3/4 46-1/448-3/4 51-1/4 Large -41-3/4 44-1/4 46-3/4 49-1/4 51-3/4 X-Large -42-1/4 44-3/4 47-1/4 49-3/4 52-1/4 XX-Large-42-3/4 45-1/4 47-3/4 50-1/4 52-3/4
Bottom leg opening: X-Small 8-1/2 8-1/2 8-1/2 8-1/2 --+/Small 8-1/2 8-1/2 8-1/2 8-1/2 8-1/2 -1/2 Medium 8-7/8 8-7/8 8-7/8 8-7/8 8-7/8 8-7/8 Large -8-7/88-7/8 8-7/8 8-7/8 8-7/8 X-Large -9-1/4 9-1/4 9-1/4 9-1/4 9-1/4 XX-Large -9-1/4 9-1/4 9-1/4 9-1/49-1/4
Page 19, Delete #FIGURE 2 # Back View Trouser# and substitute new #FIGURE 2 # Trousers, back view with label placement#.See NCTRF-013-19 or word doc tech data for figure.
ADDITIONAL INFORMATION FOR ANSI/ASQC Z1.4: NOTE: THE MOST RECENT VERSION OFTHIS DOCUMENT SHOULD BE USED. APPLICATION FOR COPIES SHOULD BE ADDRESSED TO: AMERICAN SOCIETY FOR QUALITY 600 NORTH PLANKINTONAVENUE MILWAUKEE, WISCONSIN 53203
(Ref. T0795 May 17, 2006)
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT.
0003 8415-01-667-6887 600.000 PR $ _______________ $ ______________
TROUSERS,FLIGHT
DEC
PRICING TERMS: Firm Fixed Price
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
FOB: DESTINATION DELIVERY DATE: 163 DAYS ADO
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:33 CLNG/DRY:0 PRESV MAT:00 WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNNTHKNESS:0 UNIT CONT:A1 OPI:O PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:00 -00 No specialmarking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
Packing of the trousers shall be in accordance with Barrier Material, Greaseproof, Waterproof, Flexible, Heat-Sealable; MIL-PRF-121G, Type II which is necessaryto provide protection from exposure to the extremes of the naval aviation environment.
PACKING: 20 TROUSERS OF ONE SIZE AND COLORONLY, SHALL BE PACKED INTO A SHIPPING CONTAINER.
AS A MINIMUM, FIBERBOARD SHIPPING CONTAINER SHALL CONFORM TO ASTMD-5118, TYPECF, STYLE RSC, GRADE 275, VARIETY SW, CLASS DOMESTIC, WITH A DOUBLE WALL LINER. ANY COMMERCIAL CLOSURE METHOD CITED INASTM-D-1974 IS ACCEPTABLE EXCEPT STAPLING.
SPE1C1-27-Q-0165
SECTION B
SUPPLY/SERVICE: PGC: 00033 CONT'D
PACKAGING SHALL BE AS PER MIL-STD-129, MIL-STD-147. Lot numbering shall be in accordance with MIL-STD-129 AND DLA Troop Support Clothing <(>&<)> Textiles Additional Quality Assurance Requirements. PKGING DATA -MIL-STD-2073-1E QUP:001 PRES MTHD:33 CLNG/DRY:0 PRESV MAT:00 WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0 UNIT CONT:10OPI:O PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATIONSHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
Packing of the trousers shall be in accordance withBarrier Material, Greaseproof, Waterproof, Flexible, Heat-Sealable; MIL-PRF-121G, Type II which is necessary to provide protectionfrom exposure to the extremes of the naval aviation environment.
PACKING: 20 TROUSERS OF ONE SIZE AND COLOR ONLY, SHALL BE PACKEDINTO A SHIPPING CONTAINER.
AS A MINIMUM, FIBERBOARD SHIPPING CONTAINER SHALL CONFORM TO ASTMD-5118, TYPE CF, STYLE RSC, GRADE275, VARIETY SW, CLASS DOMESTIC, WITH A DOUBLE WALL LINER. ANY COMMERCIAL CLOSURE METHOD CITED IN ASTM-D-1974 IS ACCEPTABLE EXCEPTSTAPLING.
PACKAGING SHALL BE AS PER MIL-STD-129, MIL-STD-147. Lot numbering shall be in accordance with MIL-STD-129 AND DLA TroopSupport Clothing <(>&<)> Textiles Additional Quality Assurance Requirements. PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:33CLNG/DRY:0 PRESV MAT:00 WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0 UNIT CONT:10 OPI:O PACK CODE:U MARKING SHALL BE INACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLAPACKAGING REQUIREMENTS FOR PROCUREMENT
Packing of the trousers shall be in accordance with Barrier Material, Greaseproof,Waterproof, Flexible, Heat-Sealable; MIL-PRF-121G, Type II which is necessary to provide protection from exposure to the extremes of the naval aviation environment.
PACKING: 20 TROUSERS OF ONE SIZE AND COLOR ONLY, SHALL BE PACKED INTO A SHIPPING CONTAINER.
AS A MINIMUM, FIBERBOARD SHIPPING CONTAINER SHALL CONFORM TO ASTMD-5118, TYPE CF, STYLE RSC, GRADE 275, VARIETY SW, CLASS DOMESTIC,WITH A DOUBLE WALL LINER. ANY COMMERCIAL CLOSURE METHOD CITED IN ASTM-D-1974 IS ACCEPTABLE EXCEPT STAPLING.
PACKAGING SHALL BE ASPER MIL-STD-129, MIL-STD-147. Lot numbering shall be in accordance with MIL-STD-129 AND DLA Troop Support Clothing <(>&<)> TextilesAdditional Quality Assurance Requirements.
PARCEL POST ADDRESS:
UY0157
PECKHAM INC
OCIE NORTH 3PL
5408 W GRAND RIVER AVE BLDG B
LANSING MI 48906
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND
CONTRACT
FREIGHT SHIPPING ADDRESS:
UY0157
SPE1C1-27-Q-0165
SECTION B
SUPPLY/SERVICE: PGC: 00033 CONT'D
PECKHAM INC
OCIE 3PL
5408 W GRAND RIVER AVE BLDG B
LANSING MI 48906
US
GOVT USE
External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date. 0003 7019054772 0003 N/A N/A N/A 06/24/2027

SUPPLIES/SERVICES: PGC: 00033
ITEM DESCRIPTION:
TROUSERS, FLIGHT DECK, Navy Blue, FLAME RESISTANT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ONTHE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATECONTROLS.
****
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
* RD005: Cybersecurity Maturity ModelCertification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) * RP001: DLA PACKAGING REQUIREMENTS FORPROCUREMENT
* RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS ANDNON-MANUFACTURERS)
* RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL REQUEST FOR VARIANCE (DEVIATION ORWAIVER)
* RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
* RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTEDSUPPLIES
* RQ018: CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION (AUG 2016) This item requires supply chain traceability documentation in accordance with DLA Directive (DLAD) Procurement Notes #C03 Contractor Retention of Supply ChainTraceability Documentation (AUG 2016)#. The full text of C03 can be found in the DLAD Procurement Notes on the Web at:http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. (End of TQ Requirement)
*
IP056: MERCURY OR MERCURY COMPOUNDSARE PROHIBITED IN PRESERVATION, PACKAGING, PACKING AND MARKING. * Article size NSN UPC XS-XSH 8415016676525 718020988535 XS-SH 8415016676537 718020817163 XS-RG 8415016676538718020673554 XS-LG 8415016676543 718020914374 S-XSH 8415016676549 718020774619 S-SH8415016676556 718020924885 S-RG 8415016676568 718020987880
SPE1C1-27-Q-0165
SECTION B
SUPPLY/SERVICE: PGC: 00033 CONT'D
S-LG 8415016676575 718020639659
M-XSH 8415016676885 718020889481
M-SH 8415016676887 718020976594
M-RG 8415016676888718020780726
M-LG 8415016676892 718020990392
M-XL 8415016676895 718020766782
M-XXL8415016676898 718020646800
L-SH 8415016676522 718020678504
L-RG 8415016677240 718020992426
L-LG 8415016677244 718020739298
L-XLG 8415016677249 718020812878
L-XXLG 8415016677255718020732992
XL-SH 8415016677288 718020683010
XL-RG 8415016677307 718020817408
XL-LG8415016677318 718020878300
XL-XLG 8415016677333 718020896151
XL-XXLG 8415016677337 718020958934
XXL-SH 8415016677350 718020609379
XXL-RG 8415016677368 718020989778
XXL-LG 8415016677376718020633923
XXL-XLG 8415016677382 718020742984
XXL-XXLG 8415016677386 718020939360
Trousers, Flight DECK, Flame Resistant Trousers should be made in accordance with NCTRF PD 11-07E, October 6, 2017.
Pattern Date: 11 August2021.
Standard sample of cloth Blue 3391, Piece No. 13225
Additional information NCTRF PD 11-07:
Page 1, 1.2.2, Under "Sizes":Add "Small-X Long (S-XL)".
PAGE 4 3.3.1.1: Delete and substitute: “3.3.1.1. Elasticized one-piece waistband. The elasticizedwaistband shall be a one-piece fold over band with double needle top stitch on the top and bottom length of the band. An alternatetwo-piece waistband that is stitched together along the length of band at the top/upper edge constructing an inner and outer band to form the waistband is permitted. The two-piece waistband shall follow the rest of the existing requirements to complete and attachthe waistband to the trousers. Each end shall fold back 2 (± 1/8) inches and be incorporated into the fly construction. The sidewaist elastic on each side of the trousers shall start 3 (± 1/8) inches forward of the side seam, continue past the side seam andend halfway between the outseam and the seat seam on the back panel. The finished relaxed measurement for the waistbandcircumference shall be 4 inches less than the extended finished waist circumference. The finished waistband shall measure 1-5/8 (±1/8) inches wide.”.
Page 5, 3.3.2, TABLE I: Delete and substitute: TABLE I. Fly slide fastener lengths (inches) Waist SizeTrouser Length: X-Short Short Regular Long X-Long XX-Long X-Small 6 6 1/2 7 7 1/2 Small 6-1/4 6 3/4 7-1/4 7 3/4 8-1/4 Medium 6 1/2 7 7 1/2 8 8 1/2 9 Large 7-1/4 7 3/4 8-1/4 8 3/49-1/4 X-Large 7 1/2 8 8 1/2 9 9 1/2 XX-Large 7 3/4 8-1/4 8 3/4 9-1/4 9 3/4
Tolerance: +/1/4 +/-1/4 +/1/4 +/1/4 +/1/4 +/1/4
PAGE 6, 3.4.4, Lines 1 and 2: Delete and substitute: "The trousers slide fastener shall conform to Type I, style 1 or 2 (continuous) or style 4 or 5 (preassembled), cam or semi-automatic locking, size 4, short tab pull ofA-A-55634."
Page 7, 3.4.7.1, Delete and substitute: “3.4.7.1 Combination label. Each pair of trousers shall have a combinationidentification and personal label conforming to Type VI, Classes 1 and 10 of MIL-DTL-32075. The label shall face the wearer of thefinished trousers. The label shall be sewn on the lower edge of the inside of the waistband, approximately 1/4 inch from the seatseam on the left side of the trousers as worn. When stitching the label to the bottom of the waistband, care shall be taken so there is adequate space to accommodate personnel to write their name on the label. All printing shall be legible throughout the life ofthe trousers, which shall be a minimum of 50 washings. See Figure 2..
NAME:_______________________________________________________ TROUSERS, FLIGHT DECK, FLAME RESISTANT Fiber content: Contract #:SPE100-00-0-0000 (example) Contractor Name: Name of manufacturer (if different than contractor): Lot number:
SPE1C1-27-Q-0165
SECTION B
SUPPLY/SERVICE: PGC: 00033 CONT'D
3.4.7.1.1 Instructionlabel. Each pair of trousers shall have an instruction/laundering label conforming to Type VI, Class 3 of MIL-DTL-32075. The top ofthe label shall be sewn to the left outseam of the trousers as worn and positioned approximately 4 inches below the bottom of thewaistband. See Figure 2. Stitching shall not go through the inscription. The label shall face the wearer on the finished trousers. The label shall contain the following information:
LAUNDERING: DETERGENT ONLY WASH UP TO 165°F (74° C) NO CHLORINE OR HYDROGENPEROXIDE BLEACH EITHER SEPARATELY OR IN DETERGENTS NO SOFTENERS OR STARCH FAILURE TO LAUNDER PROPERLY COULD ADVERSELY AFFECTTHE FLAME RESISTANCE OF THE FABRIC OR FOLLOW SHIPBOARD WASH FORMULA ii
DO NOT REMOVE THIS LABEL.
Page 8, “3.4.7.2 Size label. Each pair of trousers shall have a size label sewn into the lower edge of the inside of the waistband positioned next to the combination identification/personal label towards the outseam on the left side of trousers as worn leaving approximately 1/8-inch separationbetween the two labels conforming to Type VI, Class 2 of MIL-DTL-32075. The label shall indicate size and stock number as shownbelow. All of the printing shall be legible throughout the life of the garment. See Figure 2.
PAGE 9 3.5.1, Table III: Delete and substitute:
“TABLE III. Pattern list Material Pattern Computer Cut Parts NomenclatureNomenclature 1/ Basic material (3.4.1) Inseam Gusset FDT-B-INSM-GUSSET Cut 1 Back FDT-B-BACK Cut 2 Seat Patch FDT-B-SEAT-PATCH Cut 2 Waistband FDT-B-WAISTBAND Cut 1 Waistband Alternate FDT-B-WB-ALT Cut 2 Belt Loop FDT-B-BELT-LOOP Cut 1 Front 1 FDT-B-FRONT Cut 2 Fly Right FDT-B-FLY-RT Cut 1 Fly Left FDT-B-FLY-LFT Cut 1 Knee Patch FDT-B-KNEE-PATCH Cut 2
Fusible Interlining (3.4.2) Fuse Waistband Left FDT-F-WB-INTRLNG-LFT Cut 1 FuaseWaistbland Alternate Left FDT-F-WB-ALT-INTRLNG-LFT Cut 2 Fuse Waistband Center BackFDT-F-WB-INTRLING-CB Cut 1 Fuse Waistband Alternate Center Back FDT-F-WB-ALT-INTRLING-CB Cut 2 Fuse WaistbandRight FDT-F-WB-INTRLING-RT Cut 1 Fuse Waistband Alternate Right FDT-F-WB-ALT-INTRLING-RT Cut 2 Fuse FlyLeft FDT-F-FLY-LFT Cut 1 Templates Back FDT-T-BACK Template Waistband FDT-T-WAISTBAND Template Waistband Alternate Inner FDT-T-WB-ALT-INNR Template Waistband Alternate Outer FDT-T-WB-ALT-OUTER Template Front FDT-T-FRONT Template
Pages 10 and 11, 3.8,TABLE VI: Delete and substitute: TABLE VI. Finished dimensions (inches). SIZE X-SHORT SHORT REGULAR LONG X-LONG XX-LONG TOL. 1/2 Waist Relaxed: X-Small 12 12 12 12 ---1/4 Small 14 14 14 14 14 -+1/2 Medium 16 16 16 1616 16 Large -18 18 18 18 18 X-Large -20 20 20 20 20 XX-Large -22 22 22 22 22
1/2 Waist #Stretched X-Small,(min) 14 14 14 14 ---1/4 Small(min) 16 16 16 16 16 -+1/2 Medium(min) 18 18 18 18 18 18 Large(min) -20 20 20 20 20 X-Large(min) -22 22 22 22 22
SPE1C1-27-Q-0165
SECTION B
SUPPLY/SERVICE: PGC: 00033 CONT'D
XX-Large(min) -24 24 24 24 24
Inseam: X-Small 28-3/4 30-3/4 32-3/4 34-3/4 --+/Small 28-3/4 30-3/4 32-3/4 34-3/4 36-3/4 -3/4Medium 28-3/4 30-3/4 32-3/4 34-3/4 36-3/4 38-3/4 Large -30-3/4 32-3/4 34-3/4 36-3/4 38-3/4 X-Large -30-3/4 32-3/4 34-3/4 36-3/4 38-3/4 XX-Large -30 3/4 32-3/4 34-3/4 36-3/4 38-3/4
Outseam: X-Small 37-3/4 40-1/4 42-3/445-1/4 --+/Small 38-1/4 40-3/4 43-1/4 45-3/4 48-1/4 -3/4 Medium 38-3/4 41-1/4 43-3/4 46-1/448-3/4 51-1/4 Large -41-3/4 44-1/4 46-3/4 49-1/4 51-3/4 X-Large -42-1/4 44-3/4 47-1/4 49-3/4 52-1/4 XX-Large-42-3/4 45-1/4 47-3/4 50-1/4 52-3/4
Bottom leg opening: X-Small 8-1/2 8-1/2 8-1/2 8-1/2 --+/Small 8-1/2 8-1/2 8-1/2 8-1/2 8-1/2 -1/2 Medium 8-7/8 8-7/8 8-7/8 8-7/8 8-7/8 8-7/8 Large -8-7/88-7/8 8-7/8 8-7/8 8-7/8 X-Large -9-1/4 9-1/4 9-1/4 9-1/4 9-1/4 XX-Large -9-1/4 9-1/4 9-1/4 9-1/49-1/4
Page 19, Delete #FIGURE 2 # Back View Trouser# and substitute new #FIGURE 2 # Trousers, back view with label placement#.See NCTRF-013-19 or word doc tech data for figure.
ADDITIONAL INFORMATION FOR ANSI/ASQC Z1.4: NOTE: THE MOST RECENT VERSION OFTHIS DOCUMENT SHOULD BE USED. APPLICATION FOR COPIES SHOULD BE ADDRESSED TO: AMERICAN SOCIETY FOR QUALITY 600 NORTH PLANKINTONAVENUE MILWAUKEE, WISCONSIN 53203
(Ref. T0795 May 17, 2006)
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT.
0004 8415-01-667-6888 580.000 PR $ _______________ $ ______________
TROUSERS,FLIGHT
DEC
PRICING TERMS: Firm Fixed Price
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
FOB: DESTINATION DELIVERY DATE: 163 DAYS ADO
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:33 CLNG/DRY:0 PRESV MAT:00 WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNNTHKNESS:0 UNIT CONT:A1 OPI:O PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:00 -00 No specialmarking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
Packing of the trousers shall be in accordance with Barrier Material, Greaseproof, Waterproof, Flexible, Heat-Sealable; MIL-PRF-121G, Type II which is necessaryto provide protection from exposure to the extremes
SPE1C1-27-Q-0165
SECTION B
SUPPLY/SERVICE: PGC: 00033 CONT'D
of the naval aviation environment.
PACKING: 20 TROUSERS OF ONE SIZE AND COLORONLY, SHALL BE PACKED INTO A SHIPPING CONTAINER.
AS A MINIMUM, FIBERBOARD SHIPPING CONTAINER SHALL CONFORM TO ASTMD-5118, TYPECF, STYLE RSC, GRADE 275, VARIETY SW, CLASS DOMESTIC, WITH A DOUBLE WALL LINER. ANY COMMERCIAL CLOSURE METHOD CITED INASTM-D-1974 IS ACCEPTABLE EXCEPT STAPLING.
PACKAGING SHALL BE AS PER MIL-STD-129, MIL-STD-147. Lot numbering shall be in accordance with MIL-STD-129 AND DLA Troop Support Clothing <(>&<)> Textiles Additional Quality Assurance Requirements. PKGING DATA -MIL-STD-2073-1E QUP:001 PRES MTHD:33 CLNG/DRY:0 PRESV MAT:00 WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0 UNIT CONT:10OPI:O PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATIONSHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
Packing of the trousers shall be in accordance withBarrier Material, Greaseproof, Waterproof, Flexible, Heat-Sealable; MIL-PRF-121G, Type II which is necessary to provide protectionfrom exposure to the extremes of the naval aviation environment.
PACKING: 20 TROUSERS OF ONE SIZE AND COLOR ONLY, SHALL BE PACKEDINTO A SHIPPING CONTAINER.
AS A MINIMUM, FIBERBOARD SHIPPING CONTAINER SHALL CONFORM TO ASTMD-5118, TYPE CF, STYLE RSC, GRADE275, VARIETY SW, CLASS DOMESTIC, WITH A DOUBLE WALL LINER. ANY COMMERCIAL CLOSURE METHOD CITED IN ASTM-D-1974 IS ACCEPTABLE EXCEPTSTAPLING.
PACKAGING SHALL BE AS PER MIL-STD-129, MIL-STD-147. Lot numbering shall be in accordance with MIL-STD-129 AND DLA TroopSupport Clothing <(>&<)> Textiles Additional Quality Assurance Requirements. PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:33CLNG/DRY:0 PRESV MAT:00 WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0 UNIT CONT:10 OPI:O PACK CODE:U MARKING SHALL BE INACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLAPACKAGING REQUIREMENTS FOR PROCUREMENT
Packing of the trousers shall be in accordance with Barrier Material, Greaseproof,Waterproof, Flexible, Heat-Sealable; MIL-PRF-121G, Type II which is necessary to provide protection from exposure to the extremes of the naval aviation environment.
PACKING: 20 TROUSERS OF ONE SIZE AND COLOR ONLY, SHALL BE PACKED INTO A SHIPPING CONTAINER.
AS A MINIMUM, FIBERBOARD SHIPPING CONTAINER SHALL CONFORM TO ASTMD-5118, TYPE CF, STYLE RSC, GRADE 275, VARIETY SW, CLASS DOMESTIC,WITH A DOUBLE WALL LINER. ANY COMMERCIAL CLOSURE METHOD CITED IN ASTM-D-1974 IS ACCEPTABLE EXCEPT STAPLING.
PACKAGING SHALL BE ASPER MIL-STD-129, MIL-STD-147. Lot numbering shall be in accordance with MIL-STD-129 AND DLA Troop Support Clothing <(>&<)> TextilesAdditional Quality Assurance Requirements. PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:33 CLNG/DRY:0 PRESV MAT:00 WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0 UNIT CONT:10 OPI:O PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIALMARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FORPROCUREMENT
SPE1C1-27-Q-0165
SECTION B
SUPPLY/SERVICE: PGC: 00033 CONT'D
Packing of the trousers shall be in accordance with Barrier Material, Greaseproof, Waterproof, Flexible, Heat-Sealable; MIL-PRF-121G, Type II which is necessary to provide protection from exposure to the extremes of the naval aviationenvironment.
PACKING: 20 TROUSERS OF ONE SIZE AND COLOR ONLY, SHALL BE PACKED INTO A SHIPPING CONTAINER.
AS A MINIMUM, FIBERBOARD SHIPPING CONTAINER SHALL CONFORM TO ASTMD-5118, TYPE CF, STYLE RSC, GRADE 275, VARIETY SW, CLASS DOMESTIC, WITH A DOUBLE WALLLINER. ANY COMMERCIAL CLOSURE METHOD CITED IN ASTM-D-1974 IS ACCEPTABLE EXCEPT STAPLING.
PACKAGING SHALL BE AS PER MIL-STD-129,MIL-STD-147. Lot numbering shall be in accordance with MIL-STD-129 AND DLA Troop Support Clothing <(>&<)> Textiles AdditionalQuality Assurance Requirements.
PARCEL POST ADDRESS:
UY0157
PECKHAM INC
OCIE NORTH 3PL
5408 W GRAND RIVER AVE BLDG B
LANSING MI 48906
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND
CONTRACT
FREIGHT SHIPPING ADDRESS:
UY0157
PECKHAM INC
OCIE 3PL
5408 W GRAND RIVER AVE BLDG B
LANSING MI 48906
US
GOVT USE
External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date. 0004 7019054772 0004 N/A N/A N/A 06/24/2027

SUPPLIES/SERVICES: PGC: 00033
ITEM DESCRIPTION:
TROUSERS, FLIGHT DECK, Navy Blue, FLAME RESISTANT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET
FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ONTHE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATECONTROLS.
****
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
SPE1C1-27-Q-0165
SECTION B
SUPPLY/SERVICE: PGC: 00033 CONT'D
*
RD005: Cybersecurity Maturity ModelCertification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) * RP001: DLA PACKAGING REQUIREMENTS FORPROCUREMENT
* RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS ANDNON-MANUFACTURERS)
* RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL REQUEST FOR VARIANCE (DEVIATION ORWAIVER)
* RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
* RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTEDSUPPLIES
* RQ018: CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION (AUG 2016) This item requires supply chain traceability documentation in accordance with DLA Directive (DLAD) Procurement Notes #C03 Contractor Retention of Supply ChainTraceability Documentation (AUG 2016)#. The full text of C03 can be found in the DLAD Procurement Notes on the Web at:http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. (End of TQ Requirement)
*
IP056: MERCURY OR MERCURY COMPOUNDSARE PROHIBITED IN PRESERVATION, PACKAGING, PACKING AND MARKING. * Article size NSN UPC XS-XSH 8415016676525 718020988535 XS-SH 8415016676537 718020817163 XS-RG 8415016676538718020673554 XS-LG 8415016676543 718020914374 S-XSH 8415016676549 718020774619 S-SH8415016676556 718020924885 S-RG 8415016676568 718020987880 S-LG 8415016676575 718020639659 M-XSH 8415016676885 718020889481 M-SH 8415016676887 718020976594 M-RG 8415016676888718020780726 M-LG 8415016676892 718020990392 M-XL 8415016676895 718020766782 M-XXL8415016676898 718020646800 L-SH 8415016676522 718020678504 L-RG 8415016677240 718020992426 L-LG 8415016677244 718020739298 L-XLG 8415016677249 718020812878 L-XXLG 8415016677255718020732992 XL-SH 8415016677288 718020683010 XL-RG 8415016677307 718020817408 XL-LG8415016677318 718020878300 XL-XLG 8415016677333 718020896151 XL-XXLG 8415016677337 718020958934 XXL-SH 8415016677350 718020609379 XXL-RG 8415016677368 718020989778 XXL-LG 8415016677376718020633923 XXL-XLG 8415016677382 718020742984 XXL-XXLG 8415016677386 718020939360
Trousers, Flight DECK, Flame Resistant Trousers should be made in accordance with NCTRF PD 11-07E, October 6, 2017.
Pattern Date: 11 August2021.
Standard sample of cloth Blue 3391, Piece No. 13225
Additional information NCTRF PD 11-07:
Page 1, 1.2.2, Under "Sizes":Add "Small-X Long (S-XL)".
PAGE 4 3.3.1.1: Delete and substitute: “3.3.1.1. Elasticized one-piece waistband. The elasticizedwaistband shall be a one-piece fold over band with double needle top stitch on the top and bottom length of the band. An alternatetwo-piece waistband that is stitched together along the length of band at the top/upper edge constructing an inner and outer band to form the waistband is permitted. The two-piece waistband shall follow the rest of the existing requirements to complete and attachthe waistband to the trousers. Each end shall fold back 2 (± 1/8) inches and be incorporated into the fly construction. The sidewaist elastic on each side of the trousers shall start 3 (± 1/8) inches forward of the side seam, continue
SPE1C1-27-Q-0165
SECTION B
SUPPLY/SERVICE: PGC: 00033 CONT'D
past the side seam andend halfway between the outseam and the seat seam on the back panel. The finished relaxed measurement for the waistbandcircumference shall be 4 inches less than the extended finished waist circumference. The finished waistband shall measure 1-5/8 (±1/8) inches wide.”.
Page 5, 3.3.2, TABLE I: Delete and substitute: TABLE I. Fly slide fastener lengths (inches) Waist SizeTrouser Length: X-Short Short Regular Long X-Long XX-Long X-Small 6 6 1/2 7 7 1/2 Small 6-1/4 6 3/4 7-1/4 7 3/4 8-1/4 Medium 6 1/2 7 7 1/2 8 8 1/2 9 Large 7-1/4 7 3/4 8-1/4 8 3/49-1/4 X-Large 7 1/2 8 8 1/2 9 9 1/2 XX-Large 7 3/4 8-1/4 8 3/4 9-1/4 9 3/4
Tolerance: +/1/4 +/-1/4 +/1/4 +/1/4 +/1/4 +/1/4
PAGE 6, 3.4.4, Lines 1 and 2: Delete and substitute: "The trousers slide fastener shall conform to Type I, style 1 or 2 (continuous) or style 4 or 5 (preassembled), cam or semi-automatic locking, size 4, short tab pull ofA-A-55634."
Page 7, 3.4.7.1, Delete and substitute: “3.4.7.1 Combination label. Each pair of trousers shall have a combinationidentification and personal label conforming to Type VI, Classes 1 and 10 of MIL-DTL-32075. The label shall face the wearer of thefinished trousers. The label shall be sewn on the lower edge of the inside of the waistband, approximately 1/4 inch from the seatseam on the left side of the trousers as worn. When stitching the label to the bottom of the waistband, care shall be taken so there is adequate space to accommodate personnel to write their name on the label. All printing shall be legible throughout the life ofthe trousers, which shall be a minimum of 50 washings. See Figure 2..
NAME:_______________________________________________________ TROUSERS, FLIGHT DECK, FLAME RESISTANT Fiber content: Contract #:SPE100-00-0-0000 (example) Contractor Name: Name of manufacturer (if different than contractor): Lot number:
3.4.7.1.1 Instructionlabel. Each pair of trousers shall have an instruction/laundering label conforming to Type VI, Class 3 of MIL-DTL-32075. The top ofthe label shall be sewn to the left outseam of the trousers as worn and positioned approximately 4 inches below the bottom of thewaistband. See Figure 2. Stitching shall not go through the inscription. The label shall face the wearer on the finished trousers. The label shall contain the following information:
LAUNDERING: DETERGENT ONLY WASH UP TO 165°F (74° C) NO CHLORINE OR HYDROGENPEROXIDE BLEACH EITHER SEPARATELY OR IN DETERGENTS NO SOFTENERS OR STARCH FAILURE TO LAUNDER PROPERLY COULD ADVERSELY AFFECTTHE FLAME RESISTANCE OF THE FABRIC OR FOLLOW SHIPBOARD WASH FORMULA ii
DO NOT REMOVE THIS LABEL.
Page 8, “3.4.7.2 Size label. Each pair of trousers shall have a size label sewn into the lower edge of the inside of the waistband positioned next to the combination identification/personal label towards the outseam on the left side of trousers as worn leaving approximately 1/8-inch separationbetween the two labels conforming to Type VI, Class 2 of MIL-DTL-32075. The label shall indicate size and stock number as shownbelow. All of the printing shall be legible throughout the life of the garment. See Figure 2.
PAGE 9 3.5.1, Table III: Delete and substitute:
“TABLE III. Pattern list Material Pattern Computer Cut Parts NomenclatureNomenclature 1/ Basic material (3.4.1) Inseam Gusset FDT-B-INSM-GUSSET Cut 1 Back FDT-B-BACK Cut 2 Seat Patch FDT-B-SEAT-PATCH Cut 2 Waistband FDT-B-WAISTBAND Cut 1 Waistband Alternate FDT-B-WB-ALT Cut 2 Belt Loop FDT-B-BELT-LOOP Cut 1 Front 1 FDT-B-FRONT Cut 2 Fly Right FDT-B-FLY-RT Cut 1
SPE1C1-27-Q-0165
SECTION B
SUPPLY/SERVICE: PGC: 00033 CONT'D
Fly Left FDT-B-FLY-LFT Cut 1 Knee Patch FDT-B-KNEE-PATCH Cut 2
Fusible Interlining (3.4.2) Fuse Waistband Left FDT-F-WB-INTRLNG-LFT Cut 1 FuaseWaistbland Alternate Left FDT-F-WB-ALT-INTRLNG-LFT Cut 2 Fuse Waistband Center BackFDT-F-WB-INTRLING-CB Cut 1 Fuse Waistband Alternate Center Back FDT-F-WB-ALT-INTRLING-CB Cut 2 Fuse WaistbandRight FDT-F-WB-INTRLING-RT Cut 1 Fuse Waistband Alternate Right FDT-F-WB-ALT-INTRLING-RT Cut 2 Fuse FlyLeft FDT-F-FLY-LFT Cut 1 Templates Back FDT-T-BACK Template Waistband FDT-T-WAISTBAND Template Waistband Alternate Inner FDT-T-WB-ALT-INNR Template Waistband Alternate Outer FDT-T-WB-ALT-OUTER Template Front FDT-T-FRONT Template
Pages 10 and 11, 3.8,TABLE VI: Delete and substitute: TABLE VI. Finished dimensions (inches). SIZE X-SHORT SHORT REGULAR LONG X-LONG XX-LONG TOL. 1/2 Waist Relaxed: X-Small 12 12 12 12 ---1/4 Small 14 14 14 14 14 -+1/2 Medium 16 16 16 1616 16 Large -18 18 18 18 18 X-Large -20 20 20 20 20 XX-Large -22 22 22 22 22
1/2 Waist #Stretched X-Small,(min) 14 14 14 14 ---1/4 Small(min) 16 16 16 16 16 -+1/2 Medium(min) 18 18 18 18 18 18 Large(min) -20 20 20 20 20 X-Large(min) -22 22 22 22 22 XX-Large(min) -24 24 24 24 24
Inseam: X-Small 28-3/4 30-3/4 32-3/4 34-3/4 --+/Small 28-3/4 30-3/4 32-3/4 34-3/4 36-3/4 -3/4Medium 28-3/4 30-3/4 32-3/4 34-3/4 36-3/4 38-3/4 Large -30-3/4 32-3/4 34-3/4 36-3/4 38-3/4 X-Large -30-3/4 32-3/4 34-3/4 36-3/4 38-3/4 XX-Large -30 3/4 32-3/4 34-3/4 36-3/4 38-3/4
Outseam: X-Small 37-3/4 40-1/4 42-3/445-1/4 --+/Small 38-1/4 40-3/4 43-1/4 45-3/4 48-1/4 -3/4 Medium 38-3/4 41-1/4 43-3/4 46-1/448-3/4 51-1/4 Large -41-3/4 44-1/4 46-3/4 49-1/4 51-3/4 X-Large -42-1/4 44-3/4 47-1/4 49-3/4 52-1/4 XX-Large-42-3/4 45-1/4 47-3/4 50-1/4 52-3/4
Bottom leg opening: X-Small 8-1/2 8-1/2 8-1/2 8-1/2 --+/Small 8-1/2 8-1/2 8-1/2 8-1/2 8-1/2 -1/2 Medium 8-7/8 8-7/8 8-7/8 8-7/8 8-7/8 8-7/8 Large -8-7/88-7/8 8-7/8 8-7/8 8-7/8 X-Large -9-1/4 9-1/4 9-1/4 9-1/4 9-1/4 XX-Large -9-1/4 9-1/4 9-1/4 9-1/49-1/4
Page 19, Delete #FIGURE 2 # Back View Trouser# and substitute new #FIGURE 2 # Trousers, back view with label placement#.See NCTRF-013-19 or word doc tech data for figure.
ADDITIONAL INFORMATION FOR ANSI/ASQC Z1.4: NOTE: THE MOST RECENT VERSION OFTHIS DOCUMENT SHOULD BE USED. APPLICATION FOR COPIES SHOULD BE ADDRESSED TO: AMERICAN SOCIETY FOR QUALITY 600 NORTH PLANKINTONAVENUE MILWAUKEE, WISCONSIN 53203
(Ref. T0795 May 17, 2006)
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS%
SPE1C1-27-Q-0165
SECTION B
SUPPLY/SERVICE: PGC: 00033 CONT'D
2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT.
0005 8415-01-667-7240 1,260.000 PR $ _______________ $ ______________
TROUSERS,FLIGHT
DEC
PRICING TERMS: Firm Fixed Price
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
FOB: DESTINATION DELIVERY DATE: 163 DAYS ADO
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:33 CLNG/DRY:0 PRESV MAT:00 WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNNTHKNESS:0 UNIT CONT:A1 OPI:O PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:00 -00 No specialmarking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
Packing of the trousers shall be in accordance with Barrier Material, Greaseproof, Waterproof, Flexible, Heat-Sealable; MIL-PRF-121G, Type II which is necessaryto provide protection from exposure to the extremes of the naval aviation environment.
PACKING: 20 TROUSERS OF ONE SIZE AND COLORONLY, SHALL BE PACKED INTO A SHIPPING CONTAINER.
AS A MINIMUM, FIBERBOARD SHIPPING CONTAINER SHALL CONFORM TO ASTMD-5118, TYPECF, STYLE RSC, GRADE 275, VARIETY SW, CLASS DOMESTIC, WITH A DOUBLE WALL LINER. ANY COMMERCIAL CLOSURE METHOD CITED INASTM-D-1974 IS ACCEPTABLE EXCEPT STAPLING.
PACKAGING SHALL BE AS PER MIL-STD-129, MIL-STD-147. Lot numbering shall be in accordance with MIL-STD-129 AND DLA Troop Support Clothing <(>&<)> Textiles Additional Quality Assurance Requirements. PKGING DATA -MIL-STD-2073-1E QUP:001 PRES MTHD:33 CLNG/DRY:0 PRESV MAT:00 WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0 UNIT CONT:10OPI:O PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATIONSHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
Packing of the trousers shall be in accordance withBarrier Material, Greaseproof, Waterproof, Flexible, Heat-Sealable; MIL-PRF-121G, Type II which is necessary to provide protectionfrom exposure to the extremes of the naval aviation environment.
PACKING: 20 TROUSERS OF ONE SIZE AND COLOR ONLY, SHALL BE PACKEDINTO A SHIPPING CONTAINER.
AS A MINIMUM, FIBERBOARD SHIPPING CONTAINER SHALL CONFORM TO ASTMD-5118, TYPE CF, STYLE RSC, GRADE275, VARIETY SW, CLASS DOMESTIC, WITH A DOUBLE WALL LINER. ANY COMMERCIAL CLOSURE METHOD CITED IN ASTM-D-1974 IS ACCEPTABLE EXCEPTSTAPLING.
PACKAGING SHALL BE AS PER MIL-STD-129, MIL-STD-147. Lot numbering shall be in accordance with MIL-STD-129 AND DLA TroopSupport Clothing <(>&<)> Textiles Additional Quality Assurance Requirements. PKGING DATA MIL-STD-2073-1E
SPE1C1-27-Q-0165
SECTION B
SUPPLY/SERVICE: PGC: 00033 CONT'D
QUP:001 PRES MTHD:33CLNG/DRY:0 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:10 OPI:O
PACK CODE:U
MARKING SHALL BE INACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLAPACKAGING REQUIREMENTS FOR PROCUREMENT
Packing of the trousers shall be in accordance with Barrier Material, Greaseproof,Waterproof, Flexible, Heat-Sealable; MIL-PRF-121G, Type II which is necessary to provide protection from exposure to the extremes of the naval aviation environment.
PACKING: 20 TROUSERS OF ONE SIZE AND COLOR ONLY, SHALL BE PACKED INTO A SHIPPING CONTAINER.
AS A MINIMUM, FIBERBOARD SHIPPING CONTAINER SHALL CONFORM TO ASTMD-5118, TYPE CF, STYLE RSC, GRADE 275, VARIETY SW, CLASS DOMESTIC,WITH A DOUBLE WALL LINER. ANY COMMERCIAL CLOSURE METHOD CITED IN ASTM-D-1974 IS ACCEPTABLE EXCEPT STAPLING.
PACKAGING SHALL BE ASPER MIL-STD-129, MIL-STD-147. Lot numbering shall be in accordance with MIL-STD-129 AND DLA Troop Support Clothing <(>&<)> TextilesAdditional Quality Assurance Requirements. PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:33 CLNG/DRY:0 PRESV MAT:00 WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0 UNIT CONT:10 OPI:O PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIALMARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FORPROCUREMENT
Packing of the trousers shall be in accordance with Barrier Material, Greaseproof, Waterproof, Flexible, Heat-Sealable; MIL-PRF-121G, Type II which is necessary to provide protection from exposure to the extremes of the naval aviationenvironment.
PACKING: 20 TROUSERS OF ONE SIZE AND COLOR ONLY, SHALL BE PACKED INTO A SHIPPING CONTAINER.
AS A MINIMUM, FIBERBOARD SHIPPING CONTAINER SHALL CONFORM TO ASTMD-5118, TYPE CF, STYLE RSC, GRADE 275, VARIETY SW, CLASS DOMESTIC, WITH A DOUBLE WALLLINER. ANY COMMERCIAL CLOSURE METHOD CITED IN ASTM-D-1974 IS ACCEPTABLE EXCEPT STAPLING.
PACKAGING SHALL BE AS PER MIL-STD-129,MIL-STD-147. Lot numbering shall be in accordance with MIL-STD-129 AND DLA Troop Support Clothing <(>&<)> Textiles AdditionalQuality Assurance Requirements. PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:33 CLNG/DRY:0 PRESV MAT:00 WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0 UNIT CONT:10 OPI:O PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKINGCODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FORPROCUREMENT
Packing of the trousers shall be in accordance with Barrier Material, Greaseproof, Waterproof, Flexible, Heat-Sealable; MIL-PRF-121G, Type II which is necessary to provide protection from exposure to the extremes of the naval aviationenvironment.
PACKING: 20 TROUSERS OF ONE SIZE AND COLOR ONLY, SHALL BE PACKED INTO A SHIPPING CONTAINER.
AS A MINIMUM, FIBERBOARD SHIPPING CONTAINER SHALL CONFORM TO ASTMD-5118, TYPE CF, STYLE RSC, GRADE 275, VARIETY SW, CLASS DOMESTIC, WITH A DOUBLE WALLLINER. ANY COMMERCIAL CLOSURE METHOD CITED IN ASTM-D-1974 IS ACCEPTABLE EXCEPT STAPLING.
SPE1C1-27-Q-0165
SECTION B
SUPPLY/SERVICE: PGC: 00033 CONT'D
PACKAGING SHALL BE AS PER MIL-STD-129,MIL-STD-147. Lot numbering shall be in accordance with MIL-STD-129 AND DLA Troop Support Clothing <(>&<)> Textiles AdditionalQuality Assurance Requirements.
PARCEL POST ADDRESS:
UY0157
PECKHAM INC
OCIE NORTH 3PL
5408 W GRAND RIVER AVE BLDG B
LANSING MI 48906
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND
CONTRACT
FREIGHT SHIPPING ADDRESS:
UY0157
PECKHAM INC
OCIE 3PL
5408 W GRAND RIVER AVE BLDG B
LANSING MI 48906
US
GOVT USE
External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date. 0005 7019054772 0005 N/A N/A N/A 06/24/2027

SUPPLIES/SERVICES: PGC: 00033
ITEM DESCRIPTION:
TROUSERS, FLIGHT DECK, Navy Blue, FLAME RESISTANT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ONTHE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATECONTROLS.
****
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
*
RD005: Cybersecurity Maturity ModelCertification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) * RP001: DLA PACKAGING REQUIREMENTS FORPROCUREMENT
* RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS ANDNON-MANUFACTURERS)
* RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL REQUEST FOR VARIANCE (DEVIATION ORWAIVER)
* RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
SPE1C1-27-Q-0165
SECTION B
SUPPLY/SERVICE: PGC: 00033 CONT'D
*
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTEDSUPPLIES
*
RQ018: CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION (AUG 2016)
This item requires supply chain traceability documentation in accordance with DLA Directive (DLAD) Procurement Notes #C03 Contractor Retention of Supply ChainTraceability Documentation (AUG 2016)#. The full text of C03 can be found in the DLAD Procurement Notes on the Web at:http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. (End of TQ Requirement)
*
IP056: MERCURY OR MERCURY COMPOUNDSARE PROHIBITED IN PRESERVATION, PACKAGING, PACKING AND MARKING. * Article size NSN UPC XS-XSH 8415016676525 718020988535 XS-SH 8415016676537 718020817163 XS-RG 8415016676538718020673554 XS-LG 8415016676543 718020914374 S-XSH 8415016676549 718020774619 S-SH8415016676556 718020924885 S-RG 8415016676568 718020987880 S-LG 8415016676575 718020639659 M-XSH 8415016676885 718020889481 M-SH 8415016676887 718020976594 M-RG 8415016676888718020780726 M-LG 8415016676892 718020990392 M-XL 8415016676895 718020766782 M-XXL8415016676898 718020646800 L-SH 8415016676522 718020678504 L-RG 8415016677240 718020992426 L-LG 8415016677244 718020739298 L-XLG 8415016677249 718020812878 L-XXLG 8415016677255718020732992 XL-SH 8415016677288 718020683010 XL-RG 8415016677307 718020817408 XL-LG8415016677318 718020878300 XL-XLG 8415016677333 718020896151 XL-XXLG 8415016677337 718020958934 XXL-SH 8415016677350 718020609379 XXL-RG 8415016677368 718020989778 XXL-LG 8415016677376718020633923 XXL-XLG 8415016677382 718020742984 XXL-XXLG 8415016677386 718020939360
Trousers, Flight DECK, Flame Resistant Trousers should be made in accordance with NCTRF PD 11-07E, October 6, 2017.
Pattern Date: 11 August2021.
Standard sample of cloth Blue 3391, Piece No. 13225
Additional information NCTRF PD 11-07:
Page 1, 1.2.2, Under "Sizes":Add "Small-X Long (S-XL)".
PAGE 4 3.3.1.1: Delete and substitute: “3.3.1.1. Elasticized one-piece waistband. The elasticizedwaistband shall be a one-piece fold over band with double needle top stitch on the top and bottom length of the band. An alternatetwo-piece waistband that is stitched together along the length of band at the top/upper edge constructing an inner and outer band to form the waistband is permitted. The two-piece waistband shall follow the rest of the existing requirements to complete and attachthe waistband to the trousers. Each end shall fold back 2 (± 1/8) inches and be incorporated into the fly construction. The sidewaist elastic on each side of the trousers shall start 3 (± 1/8) inches forward of the side seam, continue past the side seam andend halfway between the outseam and the seat seam on the back panel. The finished relaxed measurement for the waistbandcircumference shall be 4 inches less than the extended finished waist circumference. The finished waistband shall measure 1-5/8 (±1/8) inches wide.”.
Page 5, 3.3.2, TABLE I: Delete and substitute: TABLE I. Fly slide fastener lengths (inches) Waist SizeTrouser Length: X-Short Short Regular Long X-Long XX-Long X-Small 6 6 1/2 7 7 1/2 Small 6-1/4 6 3/4 7-1/4 7 3/4 8-1/4 Medium 6 1/2 7 7 1/2 8 8 1/2 9 Large 7-1/4 7 3/4 8-1/4 8 3/49-1/4 X-Large 7 1/2 8 8 1/2 9 9 1/2 XX-Large 7 3/4 8-1/4 8 3/4 9-1/4 9 3/4
SPE1C1-27-Q-0165
SECTION B
SUPPLY/SERVICE: PGC: 00033 CONT'D
Tolerance: +/1/4 +/-1/4 +/1/4 +/1/4 +/1/4 +/1/4
PAGE 6, 3.4.4, Lines 1 and 2: Delete and substitute: "The trousers slide fastener shall conform to Type I, style 1 or 2 (continuous) or style 4 or 5 (preassembled), cam or semi-automatic locking, size 4, short tab pull ofA-A-55634."
Page 7, 3.4.7.1, Delete and substitute: “3.4.7.1 Combination label. Each pair of trousers shall have a combinationidentification and personal label conforming to Type VI, Classes 1 and 10 of MIL-DTL-32075. The label shall face the wearer of thefinished trousers. The label shall be sewn on the lower edge of the inside of the waistband, approximately 1/4 inch from the seatseam on the left side of the trousers as worn. When stitching the label to the bottom of the waistband, care shall be taken so there is adequate space to accommodate personnel to write their name on the label. All printing shall be legible throughout the life ofthe trousers, which shall be a minimum of 50 washings. See Figure 2..
NAME:_______________________________________________________ TROUSERS, FLIGHT DECK, FLAME RESISTANT Fiber content: Contract #:SPE100-00-0-0000 (example) Contractor Name: Name of manufacturer (if different than contractor): Lot number:
3.4.7.1.1 Instructionlabel. Each pair of trousers shall have an instruction/laundering label conforming to Type VI, Class 3 of MIL-DTL-32075. The top ofthe label shall be sewn to the left outseam of the trousers as worn and positioned approximately 4 inches below the bottom of thewaistband. See Figure 2. Stitching shall not go through the inscription. The label shall face the wearer on the finished trousers. The label shall contain the following information:
LAUNDERING: DETERGENT ONLY WASH UP TO 165°F (74° C) NO CHLORINE OR HYDROGENPEROXIDE BLEACH EITHER SEPARATELY OR IN DETERGENTS NO SOFTENERS OR STARCH FAILURE TO LAUNDER PROPERLY COULD ADVERSELY AFFECTTHE FLAME RESISTANCE OF THE FABRIC OR FOLLOW SHIPBOARD WASH FORMULA ii
DO NOT REMOVE THIS LABEL.
Page 8, “3.4.7.2 Size label. Each pair of trousers shall have a size label sewn into the lower edge of the inside of the waistband positioned next to the combination identification/personal label towards the outseam on the left side of trousers as worn leaving approximately 1/8-inch separationbetween the two labels conforming to Type VI, Class 2 of MIL-DTL-32075. The label shall indicate size and stock number as shownbelow. All of the printing shall be legible throughout the life of the garment. See Figure 2.
PAGE 9 3.5.1, Table III: Delete and substitute:
“TABLE III. Pattern list Material Pattern Computer Cut Parts NomenclatureNomenclature 1/ Basic material (3.4.1) Inseam Gusset FDT-B-INSM-GUSSET Cut 1 Back FDT-B-BACK Cut 2 Seat Patch FDT-B-SEAT-PATCH Cut 2 Waistband FDT-B-WAISTBAND Cut 1 Waistband Alternate FDT-B-WB-ALT Cut 2 Belt Loop FDT-B-BELT-LOOP Cut 1 Front 1 FDT-B-FRONT Cut 2 Fly Right FDT-B-FLY-RT Cut 1 Fly Left FDT-B-FLY-LFT Cut 1 Knee Patch FDT-B-KNEE-PATCH Cut 2
Fusible Interlining (3.4.2) Fuse Waistband Left FDT-F-WB-INTRLNG-LFT Cut 1 FuaseWaistbland Alternate Left FDT-F-WB-ALT-INTRLNG-LFT Cut 2 Fuse Waistband Center BackFDT-F-WB-INTRLING-CB Cut 1 Fuse Waistband Alternate Center Back FDT-F-WB-ALT-INTRLING-CB Cut 2 Fuse WaistbandRight FDT-F-WB-INTRLING-RT Cut 1 Fuse Waistband
SPE1C1-27-Q-0165
SECTION B
SUPPLY/SERVICE: PGC: 00033 CONT'D
Alternate Right FDT-F-WB-ALT-INTRLING-RT Cut 2 Fuse FlyLeft FDT-F-FLY-LFT Cut 1 Templates Back FDT-T-BACK Template Waistband FDT-T-WAISTBAND Template Waistband Alternate Inner FDT-T-WB-ALT-INNR Template Waistband Alternate Outer FDT-T-WB-ALT-OUTER Template Front FDT-T-FRONT Template
Pages 10 and 11, 3.8,TABLE VI: Delete and substitute: TABLE VI. Finished dimensions (inches). SIZE X-SHORT SHORT REGULAR LONG X-LONG XX-LONG TOL. 1/2 Waist Relaxed: X-Small 12 12 12 12 ---1/4 Small 14 14 14 14 14 -+1/2 Medium 16 16 16 1616 16 Large -18 18 18 18 18 X-Large -20 20 20 20 20 XX-Large -22 22 22 22 22
1/2 Waist #Stretched X-Small,(min) 14 14 14 14 ---1/4 Small(min) 16 16 16 16 16 -+1/2 Medium(min) 18 18 18 18 18 18 Large(min) -20 20 20 20 20 X-Large(min) -22 22 22 22 22 XX-Large(min) -24 24 24 24 24
Inseam: X-Small 28-3/4 30-3/4 32-3/4 34-3/4 --+/Small 28-3/4 30-3/4 32-3/4 34-3/4 36-3/4 -3/4Medium 28-3/4 30-3/4 32-3/4 34-3/4 36-3/4 38-3/4 Large -30-3/4 32-3/4 34-3/4 36-3/4 38-3/4 X-Large -30-3/4 32-3/4 34-3/4 36-3/4 38-3/4 XX-Large -30 3/4 32-3/4 34-3/4 36-3/4 38-3/4
Outseam: X-Small 37-3/4 40-1/4 42-3/445-1/4 --+/Small 38-1/4 40-3/4 43-1/4 45-3/4 48-1/4 -3/4 Medium 38-3/4 41-1/4 43-3/4 46-1/448-3/4 51-1/4 Large -41-3/4 44-1/4 46-3/4 49-1/4 51-3/4 X-Large -42-1/4 44-3/4 47-1/4 49-3/4 52-1/4 XX-Large-42-3/4 45-1/4 47-3/4 50-1/4 52-3/4
Bottom leg opening: X-Small 8-1/2 8-1/2 8-1/2 8-1/2 --+/Small 8-1/2 8-1/2 8-1/2 8-1/2 8-1/2 -1/2 Medium 8-7/8 8-7/8 8-7/8 8-7/8 8-7/8 8-7/8 Large -8-7/88-7/8 8-7/8 8-7/8 8-7/8 X-Large -9-1/4 9-1/4 9-1/4 9-1/4 9-1/4 XX-Large -9-1/4 9-1/4 9-1/4 9-1/49-1/4
Page 19, Delete #FIGURE 2 # Back View Trouser# and substitute new #FIGURE 2 # Trousers, back view with label placement#.See NCTRF-013-19 or word doc tech data for figure.
ADDITIONAL INFORMATION FOR ANSI/ASQC Z1.4: NOTE: THE MOST RECENT VERSION OFTHIS DOCUMENT SHOULD BE USED. APPLICATION FOR COPIES SHOULD BE ADDRESSED TO: AMERICAN SOCIETY FOR QUALITY 600 NORTH PLANKINTONAVENUE MILWAUKEE, WISCONSIN 53203
(Ref. T0795 May 17, 2006)
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT.
0006 8415-01-667-7307 300.000 PR $ _______________ $ ______________
TROUSERS,FLIGHT
DEC
PRICING TERMS: Firm Fixed Price
QTY VARIANCE: PLUS 0% MINUS 0%
SPE1C1-27-Q-0165
SECTION B
SUPPLY/SERVICE: PGC: 00033 CONT'D
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
FOB: DESTINATION DELIVERY DATE: 163 DAYS ADO
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:0 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNNTHKNESS:0
UNIT CONT:A1 OPI:O
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No specialmarking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
Packing of the trousers shall be in accordance with Barrier Material, Greaseproof, Waterproof, Flexible, Heat-Sealable; MIL-PRF-121G, Type II which is necessaryto provide protection from exposure to the extremes of the naval aviation environment.
PACKING: 20 TROUSERS OF ONE SIZE AND COLORONLY, SHALL BE PACKED INTO A SHIPPING CONTAINER.
AS A MINIMUM, FIBERBOARD SHIPPING CONTAINER SHALL CONFORM TO ASTMD-5118, TYPECF, STYLE RSC, GRADE 275, VARIETY SW, CLASS DOMESTIC, WITH A DOUBLE WALL LINER. ANY COMMERCIAL CLOSURE METHOD CITED INASTM-D-1974 IS ACCEPTABLE EXCEPT STAPLING.
PACKAGING SHALL BE AS PER MIL-STD-129, MIL-STD-147. Lot numbering shall be in accordance with MIL-STD-129 AND DLA Troop Support Clothing <(>&<)> Textiles Additional Quality Assurance Requirements. PKGING DATA -MIL-STD-2073-1E QUP:001 PRES MTHD:33 CLNG/DRY:0 PRESV MAT:00 WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0 UNIT CONT:10OPI:O PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATIONSHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
Packing of the trousers shall be in accordance withBarrier Material, Greaseproof, Waterproof, Flexible, Heat-Sealable; MIL-PRF-121G, Type II which is necessary to provide protectionfrom exposure to the extremes of the naval aviation environment.
PACKING: 20 TROUSERS OF ONE SIZE AND COLOR ONLY, SHALL BE PACKEDINTO A SHIPPING CONTAINER.
AS A MINIMUM, FIBERBOARD SHIPPING CONTAINER SHALL CONFORM TO ASTMD-5118, TYPE CF, STYLE RSC, GRADE275, VARIETY SW, CLASS DOMESTIC, WITH A DOUBLE WALL LINER. ANY COMMERCIAL CLOSURE METHOD CITED IN ASTM-D-1974 IS ACCEPTABLE EXCEPTSTAPLING.
PACKAGING SHALL BE AS PER MIL-STD-129, MIL-STD-147. Lot numbering shall be in accordance with MIL-STD-129 AND DLA TroopSupport Clothing <(>&<)> Textiles Additional Quality Assurance Requirements. PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:33CLNG/DRY:0 PRESV MAT:00 WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0 UNIT CONT:10 OPI:O PACK CODE:U MARKING SHALL BE INACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLAPACKAGING REQUIREMENTS FOR PROCUREMENT
Packing of the trousers shall be in accordance with Barrier Material, Greaseproof,Waterproof, Flexible, Heat-Sealable; MIL-PRF-121G, Type II which is necessary to provide protection from exposure to the extremes of the naval aviation environment.
SPE1C1-27-Q-0165
SECTION B
SUPPLY/SERVICE: PGC: 00033 CONT'D
PACKING: 20 TROUSERS OF ONE SIZE AND COLOR ONLY, SHALL BE PACKED INTO A
SHIPPING CONTAINER.
AS A MINIMUM, FIBERBOARD SHIPPING CONTAINER SHALL CONFORM TO ASTM
D-5118, TYPE CF, STYLE RSC, GRADE 275, VARIETY SW, CLASS DOMESTIC,WITH
A DOUBLE WALL LINER. ANY COMMERCIAL CLOSURE METHOD CITED IN ASTM-D-1974
IS ACCEPTABLE EXCEPT STAPLING.
PACKAGING SHALL BE ASPER MIL-STD-129, MIL-STD-147. Lot numbering shall be in accordance with MIL-STD-129 AND DLA Troop Support Clothing <(>&<)> TextilesAdditional Quality Assurance Requirements. PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:33 CLNG/DRY:0 PRESV MAT:00 WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0 UNIT CONT:10 OPI:O PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIALMARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FORPROCUREMENT
Packing of the trousers shall be in accordance with Barrier Material, Greaseproof, Waterproof, Flexible, Heat-Sealable; MIL-PRF-121G, Type II which is necessary to provide protection from exposure to the extremes of the naval aviationenvironment.
PACKING: 20 TROUSERS OF ONE SIZE AND COLOR ONLY, SHALL BE PACKED INTO A SHIPPING CONTAINER.
AS A MINIMUM, FIBERBOARD SHIPPING CONTAINER SHALL CONFORM TO ASTMD-5118, TYPE CF, STYLE RSC, GRADE 275, VARIETY SW, CLASS DOMESTIC, WITH A DOUBLE WALLLINER. ANY COMMERCIAL CLOSURE METHOD CITED IN ASTM-D-1974 IS ACCEPTABLE EXCEPT STAPLING.
PACKAGING SHALL BE AS PER MIL-STD-129,MIL-STD-147. Lot numbering shall be in accordance with MIL-STD-129 AND DLA Troop Support Clothing <(>&<)> Textiles AdditionalQuality Assurance Requirements. PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:33 CLNG/DRY:0 PRESV MAT:00 WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0 UNIT CONT:10 OPI:O PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKINGCODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FORPROCUREMENT
Packing of the trousers shall be in accordance with Barrier Material, Greaseproof, Waterproof, Flexible, Heat-Sealable; MIL-PRF-121G, Type II which is necessary to provide protection from exposure to the extremes of the naval aviationenvironment.
PACKING: 20 TROUSERS OF ONE SIZE AND COLOR ONLY, SHALL BE PACKED INTO A SHIPPING CONTAINER.
AS A MINIMUM, FIBERBOARD SHIPPING CONTAINER SHALL CONFORM TO ASTMD-5118, TYPE CF, STYLE RSC, GRADE 275, VARIETY SW, CLASS DOMESTIC, WITH A DOUBLE WALLLINER. ANY COMMERCIAL CLOSURE METHOD CITED IN ASTM-D-1974 IS ACCEPTABLE EXCEPT STAPLING.
PACKAGING SHALL BE AS PER MIL-STD-129,MIL-STD-147. Lot numbering shall be in accordance with MIL-STD-129 AND DLA Troop Support Clothing <(>&<)> Textiles AdditionalQuality Assurance Requirements. PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:33 CLNG/DRY:0 PRESV MAT:00 WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0 UNIT CONT:10 OPI:O PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKINGCODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FORPROCUREMENT
SPE1C1-27-Q-0165
SECTION B
SUPPLY/SERVICE: PGC: 00033 CONT'D
Packing of the trousers shall be in accordance with Barrier Material, Greaseproof, Waterproof, Flexible, Heat-Sealable; MIL-PRF-121G, Type II which is necessary to provide protection from exposure to the extremes of the naval aviationenvironment.
PACKING: 20 TROUSERS OF ONE SIZE AND COLOR ONLY, SHALL BE PACKED INTO A SHIPPING CONTAINER.
AS A MINIMUM, FIBERBOARD SHIPPING CONTAINER SHALL CONFORM TO ASTMD-5118, TYPE CF, STYLE RSC, GRADE 275, VARIETY SW, CLASS DOMESTIC, WITH A DOUBLE WALLLINER. ANY COMMERCIAL CLOSURE METHOD CITED IN ASTM-D-1974 IS ACCEPTABLE EXCEPT STAPLING.
PACKAGING SHALL BE AS PER MIL-STD-129,MIL-STD-147. Lot numbering shall be in accordance with MIL-STD-129 AND DLA Troop Support Clothing <(>&<)> Textiles AdditionalQuality Assurance Requirements.
PARCEL POST ADDRESS:
UY0157
PECKHAM INC
OCIE NORTH 3PL
5408 W GRAND RIVER AVE BLDG B
LANSING MI 48906
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND
CONTRACT
FREIGHT SHIPPING ADDRESS:
UY0157
PECKHAM INC
OCIE 3PL
5408 W GRAND RIVER AVE BLDG B
LANSING MI 48906
US
GOVT USE
External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date. 0006 7019054772 0006 N/A N/A N/A 06/24/2027

SUPPLIES/SERVICES: PGC: 00033
ITEM DESCRIPTION:
TROUSERS, FLIGHT DECK, Navy Blue, FLAME RESISTANT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET
FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ONTHE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATECONTROLS.
****
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
*
SPE1C1-27-Q-0165
SECTION B
SUPPLY/SERVICE: PGC: 00033 CONT'D
RD005: Cybersecurity Maturity ModelCertification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) * RP001: DLA PACKAGING REQUIREMENTS FORPROCUREMENT
* RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS ANDNON-MANUFACTURERS)
* RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL REQUEST FOR VARIANCE (DEVIATION ORWAIVER)
* RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
* RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTEDSUPPLIES
* RQ018: CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION (AUG 2016) This item requires supply chain traceability documentation in accordance with DLA Directive (DLAD) Procurement Notes #C03 Contractor Retention of Supply ChainTraceability Documentation (AUG 2016)#. The full text of C03 can be found in the DLAD Procurement Notes on the Web at:http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. (End of TQ Requirement)
*
IP056: MERCURY OR MERCURY COMPOUNDSARE PROHIBITED IN PRESERVATION, PACKAGING, PACKING AND MARKING. * Article size NSN UPC XS-XSH 8415016676525 718020988535 XS-SH 8415016676537 718020817163 XS-RG 8415016676538718020673554 XS-LG 8415016676543 718020914374 S-XSH 8415016676549 718020774619 S-SH8415016676556 718020924885 S-RG 8415016676568 718020987880 S-LG 8415016676575 718020639659 M-XSH 8415016676885 718020889481 M-SH 8415016676887 718020976594 M-RG 8415016676888718020780726 M-LG 8415016676892 718020990392 M-XL 8415016676895 718020766782 M-XXL8415016676898 718020646800 L-SH 8415016676522 718020678504 L-RG 8415016677240 718020992426 L-LG 8415016677244 718020739298 L-XLG 8415016677249 718020812878 L-XXLG 8415016677255718020732992 XL-SH 8415016677288 718020683010 XL-RG 8415016677307 718020817408 XL-LG8415016677318 718020878300 XL-XLG 8415016677333 718020896151 XL-XXLG 8415016677337 718020958934 XXL-SH 8415016677350 718020609379 XXL-RG 8415016677368 718020989778 XXL-LG 8415016677376718020633923 XXL-XLG 8415016677382 718020742984 XXL-XXLG 8415016677386 718020939360
Trousers, Flight DECK, Flame Resistant Trousers should be made in accordance with NCTRF PD 11-07E, October 6, 2017.
Pattern Date: 11 August2021.
Standard sample of cloth Blue 3391, Piece No. 13225
Additional information NCTRF PD 11-07:
Page 1, 1.2.2, Under "Sizes":Add "Small-X Long (S-XL)".
PAGE 4 3.3.1.1: Delete and substitute: “3.3.1.1. Elasticized one-piece waistband. The elasticizedwaistband shall be a one-piece fold over band with double needle top stitch on the top and bottom length of the band. An alternatetwo-piece waistband that is stitched together along the length of band at the top/upper edge constructing an inner and outer band to form the waistband is permitted. The two-piece waistband shall follow the rest of the existing requirements to complete and attachthe waistband to the trousers. Each end shall fold back 2 (± 1/8) inches and be incorporated into the fly construction. The sidewaist elastic on each side of the trousers shall start 3 (± 1/8) inches forward of the side seam, continue past the side seam andend halfway between the outseam and the seat seam on the back panel. The finished relaxed
SPE1C1-27-Q-0165
SECTION B
SUPPLY/SERVICE: PGC: 00033 CONT'D
measurement for the waistbandcircumference shall be 4 inches less than the extended finished waist circumference. The finished waistband shall measure 1-5/8 (±1/8) inches wide.”.
Page 5, 3.3.2, TABLE I: Delete and substitute: TABLE I. Fly slide fastener lengths (inches) Waist SizeTrouser Length: X-Short Short Regular Long X-Long XX-Long X-Small 6 6 1/2 7 7 1/2 Small 6-1/4 6 3/4 7-1/4 7 3/4 8-1/4 Medium 6 1/2 7 7 1/2 8 8 1/2 9 Large 7-1/4 7 3/4 8-1/4 8 3/49-1/4 X-Large 7 1/2 8 8 1/2 9 9 1/2 XX-Large 7 3/4 8-1/4 8 3/4 9-1/4 9 3/4
Tolerance: +/1/4 +/-1/4 +/1/4 +/1/4 +/1/4 +/1/4
PAGE 6, 3.4.4, Lines 1 and 2: Delete and substitute: "The trousers slide fastener shall conform to Type I, style 1 or 2 (continuous) or style 4 or 5 (preassembled), cam or semi-automatic locking, size 4, short tab pull ofA-A-55634."
Page 7, 3.4.7.1, Delete and substitute: “3.4.7.1 Combination label. Each pair of trousers shall have a combinationidentification and personal label conforming to Type VI, Classes 1 and 10 of MIL-DTL-32075. The label shall face the wearer of thefinished trousers. The label shall be sewn on the lower edge of the inside of the waistband, approximately 1/4 inch from the seatseam on the left side of the trousers as worn. When stitching the label to the bottom of the waistband, care shall be taken so there is adequate space to accommodate personnel to write their name on the label. All printing shall be legible throughout the life ofthe trousers, which shall be a minimum of 50 washings. See Figure 2..
NAME:_______________________________________________________ TROUSERS, FLIGHT DECK, FLAME RESISTANT Fiber content: Contract #:SPE100-00-0-0000 (example) Contractor Name: Name of manufacturer (if different than contractor): Lot number:
3.4.7.1.1 Instructionlabel. Each pair of trousers shall have an instruction/laundering label conforming to Type VI, Class 3 of MIL-DTL-32075. The top ofthe label shall be sewn to the left outseam of the trousers as worn and positioned approximately 4 inches below the bottom of thewaistband. See Figure 2. Stitching shall not go through the inscription. The label shall face the wearer on the finished trousers. The label shall contain the following information:
LAUNDERING: DETERGENT ONLY WASH UP TO 165°F (74° C) NO CHLORINE OR HYDROGENPEROXIDE BLEACH EITHER SEPARATELY OR IN DETERGENTS NO SOFTENERS OR STARCH FAILURE TO LAUNDER PROPERLY COULD ADVERSELY AFFECTTHE FLAME RESISTANCE OF THE FABRIC OR FOLLOW SHIPBOARD WASH FORMULA ii
DO NOT REMOVE THIS LABEL.
Page 8, “3.4.7.2 Size label. Each pair of trousers shall have a size label sewn into the lower edge of the inside of the waistband positioned next to the combination identification/personal label towards the outseam on the left side of trousers as worn leaving approximately 1/8-inch separationbetween the two labels conforming to Type VI, Class 2 of MIL-DTL-32075. The label shall indicate size and stock number as shownbelow. All of the printing shall be legible throughout the life of the garment. See Figure 2.
PAGE 9 3.5.1, Table III: Delete and substitute:
“TABLE III. Pattern list Material Pattern Computer Cut Parts NomenclatureNomenclature 1/ Basic material (3.4.1) Inseam Gusset FDT-B-INSM-GUSSET Cut 1 Back FDT-B-BACK Cut 2 Seat Patch FDT-B-SEAT-PATCH Cut 2 Waistband FDT-B-WAISTBAND Cut 1 Waistband Alternate FDT-B-WB-ALT Cut 2 Belt Loop FDT-B-BELT-LOOP Cut 1 Front 1 FDT-B-FRONT Cut 2 Fly Right FDT-B-FLY-RT Cut 1 Fly Left FDT-B-FLY-LFT Cut 1
SPE1C1-27-Q-0165
SECTION B
SUPPLY/SERVICE: PGC: 00033 CONT'D
Knee Patch FDT-B-KNEE-PATCH Cut 2
Fusible Interlining (3.4.2) Fuse Waistband Left FDT-F-WB-INTRLNG-LFT Cut 1 FuaseWaistbland Alternate Left FDT-F-WB-ALT-INTRLNG-LFT Cut 2 Fuse Waistband Center BackFDT-F-WB-INTRLING-CB Cut 1 Fuse Waistband Alternate Center Back FDT-F-WB-ALT-INTRLING-CB Cut 2 Fuse WaistbandRight FDT-F-WB-INTRLING-RT Cut 1 Fuse Waistband Alternate Right FDT-F-WB-ALT-INTRLING-RT Cut 2 Fuse FlyLeft FDT-F-FLY-LFT Cut 1 Templates Back FDT-T-BACK Template Waistband FDT-T-WAISTBAND Template Waistband Alternate Inner FDT-T-WB-ALT-INNR Template Waistband Alternate Outer FDT-T-WB-ALT-OUTER Template Front FDT-T-FRONT Template
Pages 10 and 11, 3.8,TABLE VI: Delete and substitute: TABLE VI. Finished dimensions (inches). SIZE X-SHORT SHORT REGULAR LONG X-LONG XX-LONG TOL. 1/2 Waist Relaxed: X-Small 12 12 12 12 ---1/4 Small 14 14 14 14 14 -+1/2 Medium 16 16 16 1616 16 Large -18 18 18 18 18 X-Large -20 20 20 20 20 XX-Large -22 22 22 22 22
1/2 Waist #Stretched X-Small,(min) 14 14 14 14 ---1/4 Small(min) 16 16 16 16 16 -+1/2 Medium(min) 18 18 18 18 18 18 Large(min) -20 20 20 20 20 X-Large(min) -22 22 22 22 22 XX-Large(min) -24 24 24 24 24
Inseam: X-Small 28-3/4 30-3/4 32-3/4 34-3/4 --+/Small 28-3/4 30-3/4 32-3/4 34-3/4 36-3/4 -3/4Medium 28-3/4 30-3/4 32-3/4 34-3/4 36-3/4 38-3/4 Large -30-3/4 32-3/4 34-3/4 36-3/4 38-3/4 X-Large -30-3/4 32-3/4 34-3/4 36-3/4 38-3/4 XX-Large -30 3/4 32-3/4 34-3/4 36-3/4 38-3/4
Outseam: X-Small 37-3/4 40-1/4 42-3/445-1/4 --+/Small 38-1/4 40-3/4 43-1/4 45-3/4 48-1/4 -3/4 Medium 38-3/4 41-1/4 43-3/4 46-1/448-3/4 51-1/4 Large -41-3/4 44-1/4 46-3/4 49-1/4 51-3/4 X-Large -42-1/4 44-3/4 47-1/4 49-3/4 52-1/4 XX-Large-42-3/4 45-1/4 47-3/4 50-1/4 52-3/4
Bottom leg opening: X-Small 8-1/2 8-1/2 8-1/2 8-1/2 --+/Small 8-1/2 8-1/2 8-1/2 8-1/2 8-1/2 -1/2 Medium 8-7/8 8-7/8 8-7/8 8-7/8 8-7/8 8-7/8 Large -8-7/88-7/8 8-7/8 8-7/8 8-7/8 X-Large -9-1/4 9-1/4 9-1/4 9-1/4 9-1/4 XX-Large -9-1/4 9-1/4 9-1/4 9-1/49-1/4
Page 19, Delete #FIGURE 2 # Back View Trouser# and substitute new #FIGURE 2 # Trousers, back view with label placement#.See NCTRF-013-19 or word doc tech data for figure.
ADDITIONAL INFORMATION FOR ANSI/ASQC Z1.4: NOTE: THE MOST RECENT VERSION OFTHIS DOCUMENT SHOULD BE USED. APPLICATION FOR COPIES SHOULD BE ADDRESSED TO: AMERICAN SOCIETY FOR QUALITY 600 NORTH PLANKINTONAVENUE MILWAUKEE, WISCONSIN 53203
(Ref. T0795 May 17, 2006)
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE1C1-27-Q-0165
SECTION B
SUPPLY/SERVICE: PGC: 00033 CONT'D
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT.
0007 8415-01-667-7368 460.000 PR $ _______________ $ ______________
TROUSERS,FLIGHT
DEC
PRICING TERMS: Firm Fixed Price
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
FOB: DESTINATION DELIVERY DATE: 163 DAYS ADO
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:33 CLNG/DRY:0 PRESV MAT:00 WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNNTHKNESS:0 UNIT CONT:A1 OPI:O PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:00 -00 No specialmarking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
REQUIREMENTS FOR PROCUREMENT
Packing of the trousers shall be in accordance with Barrier Material, Greaseproof, Waterproof, Flexible, Heat-Sealable; MIL-PRF-121G, Type II which is necessaryto provide protection from exposure to the extremes of the naval aviation environment.
PACKING: 20 TROUSERS OF ONE SIZE AND COLORONLY, SHALL BE PACKED INTO A SHIPPING CONTAINER.
AS A MINIMUM, FIBERBOARD SHIPPING CONTAINER SHALL CONFORM TO ASTMD-5118, TYPECF, STYLE RSC, GRADE 275, VARIETY SW, CLASS DOMESTIC, WITH A DOUBLE WALL LINER. ANY COMMERCIAL CLOSURE METHOD CITED INASTM-D-1974 IS ACCEPTABLE EXCEPT STAPLING.
PACKAGING SHALL BE AS PER MIL-STD-129, MIL-STD-147. Lot numbering shall be in accordance with MIL-STD-129 AND DLA Troop Support Clothing <(>&<)> Textiles Additional Quality Assurance Requirements. PKGING DATA -MIL-STD-2073-1E QUP:001 PRES MTHD:33 CLNG/DRY:0 PRESV MAT:00 WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0 UNIT CONT:10OPI:O PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATIONSHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
Packing of the trousers shall be in accordance withBarrier Material, Greaseproof, Waterproof, Flexible, Heat-Sealable; MIL-PRF-121G, Type II which is necessary to provide protectionfrom exposure to the extremes of the naval aviation environment.
PACKING: 20 TROUSERS OF ONE SIZE AND COLOR ONLY, SHALL BE PACKEDINTO A SHIPPING CONTAINER.
AS A MINIMUM, FIBERBOARD SHIPPING CONTAINER SHALL CONFORM TO ASTMD-5118, TYPE CF, STYLE RSC, GRADE275, VARIETY SW, CLASS DOMESTIC, WITH A DOUBLE WALL LINER. ANY COMMERCIAL CLOSURE METHOD CITED IN ASTM-D-1974 IS ACCEPTABLE EXCEPTSTAPLING.
PACKAGING SHALL BE AS PER MIL-STD-129, MIL-STD-147. Lot numbering shall be in accordance with MIL-STD-129 AND DLA TroopSupport Clothing <(>&<)> Textiles Additional Quality Assurance Requirements. PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:33CLNG/DRY:0 PRESV MAT:00
SPE1C1-27-Q-0165
SECTION B
SUPPLY/SERVICE: PGC: 00033 CONT'D
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:10 OPI:O
PACK CODE:U
MARKING SHALL BE INACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLAPACKAGING REQUIREMENTS FOR PROCUREMENT
Packing of the trousers shall be in accordance with Barrier Material, Greaseproof,Waterproof, Flexible, Heat-Sealable; MIL-PRF-121G, Type II which is necessary to provide protection from exposure to the extremes of the naval aviation environment.
PACKING: 20 TROUSERS OF ONE SIZE AND COLOR ONLY, SHALL BE PACKED INTO A SHIPPING CONTAINER.
AS A MINIMUM, FIBERBOARD SHIPPING CONTAINER SHALL CONFORM TO ASTMD-5118, TYPE CF, STYLE RSC, GRADE 275, VARIETY SW, CLASS DOMESTIC,WITH A DOUBLE WALL LINER. ANY COMMERCIAL CLOSURE METHOD CITED IN ASTM-D-1974 IS ACCEPTABLE EXCEPT STAPLING.
PACKAGING SHALL BE ASPER MIL-STD-129, MIL-STD-147. Lot numbering shall be in accordance with MIL-STD-129 AND DLA Troop Support Clothing <(>&<)> TextilesAdditional Quality Assurance Requirements. PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:33 CLNG/DRY:0 PRESV MAT:00 WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0 UNIT CONT:10 OPI:O PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIALMARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FORPROCUREMENT
Packing of the trousers shall be in accordance with Barrier Material, Greaseproof, Waterproof, Flexible, Heat-Sealable; MIL-PRF-121G, Type II which is necessary to provide protection from exposure to the extremes of the naval aviationenvironment.
PACKING: 20 TROUSERS OF ONE SIZE AND COLOR ONLY, SHALL BE PACKED INTO A SHIPPING CONTAINER.
AS A MINIMUM, FIBERBOARD SHIPPING CONTAINER SHALL CONFORM TO ASTMD-5118, TYPE CF, STYLE RSC, GRADE 275, VARIETY SW, CLASS DOMESTIC, WITH A DOUBLE WALLLINER. ANY COMMERCIAL CLOSURE METHOD CITED IN ASTM-D-1974 IS ACCEPTABLE EXCEPT STAPLING.
PACKAGING SHALL BE AS PER MIL-STD-129,MIL-STD-147. Lot numbering shall be in accordance with MIL-STD-129 AND DLA Troop Support Clothing <(>&<)> Textiles AdditionalQuality Assurance Requirements. PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:33 CLNG/DRY:0 PRESV MAT:00 WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0 UNIT CONT:10 OPI:O PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKINGCODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FORPROCUREMENT
Packing of the trousers shall be in accordance with Barrier Material, Greaseproof, Waterproof, Flexible, Heat-Sealable; MIL-PRF-121G, Type II which is necessary to provide protection from exposure to the extremes of the naval aviationenvironment.
PACKING: 20 TROUSERS OF ONE SIZE AND COLOR ONLY, SHALL BE PACKED INTO A SHIPPING CONTAINER.
AS A MINIMUM, FIBERBOARD SHIPPING CONTAINER SHALL CONFORM TO ASTMD-5118, TYPE CF, STYLE RSC, GRADE 275, VARIETY SW, CLASS DOMESTIC, WITH A DOUBLE WALLLINER. ANY COMMERCIAL CLOSURE METHOD CITED IN ASTM-D-1974 IS ACCEPTABLE EXCEPT STAPLING.
PACKAGING SHALL BE AS PER MIL-STD-129,MIL-STD-147. Lot numbering shall
SPE1C1-27-Q-0165
SECTION B
SUPPLY/SERVICE: PGC: 00033 CONT'D
be in accordance with MIL-STD-129 AND DLA Troop Support Clothing <(>&<)> Textiles AdditionalQuality Assurance Requirements. PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:33 CLNG/DRY:0 PRESV MAT:00 WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0 UNIT CONT:10 OPI:O PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKINGCODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FORPROCUREMENT
Packing of the trousers shall be in accordance with Barrier Material, Greaseproof, Waterproof, Flexible, Heat-Sealable; MIL-PRF-121G, Type II which is necessary to provide protection from exposure to the extremes of the

Description truncated.