Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

TUBE

Active
SPEFA5-26-T-1008Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is a solicitation for the procurement of two tubes, identified by NSN 4710LLNCB6720 and Bell Textron Inc part number 212-076-271-1. The item is designated as a critical application item and is subject to specific technical and quality requirements as outlined in the DLA Master List. Delivery is required within 11 days after receipt of order, with the final destination being the Fleet Readiness Center DLA in Cherry Point, North Carolina. The agreement mandates strict adherence to MIL-STD-130N for identification marking and ASTM D3951 for packaging, with palletization following RP001 requirements. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, emphasizing zero non-conformances for acceptance. There is no shelf life requirement for this material, and the contract specifies a zero percent quantity variance.

General Info

Procurement of two critical tubes for FRC DLA Cherry Point within 11 days.

Agency

Department Of Defense → DLA FLEET READINESS CENTER DLA PSCView Agency

NAICS

488190 - Other Support Activities for Air TransportationView NAICS

Place of Performance

PSC 8021, CHERRY POINT, NC, 28533-0021, USA

Set-Aside

NONE

Documents

(1)

SPEFA5-26-T-1008 RFQ

PDF•17 pages•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA FLEET READINESS CENTER DLA PSC
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → DLA FLEET READINESS CENTER DLA PSC
View Agency Profile
Office AddressUSA
Contacts
Larry Kemp
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
TUBE
TUBE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
MIL-STD-130N(1) DATED 16 NOV 2012.
IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
CRITICAL APPLICATION ITEM
BELL TEXTRON INC 97499 P/N 212-076-271-1
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017949590 0001 EA 2.000
SPEFA5-26-T-1008
SECTION B
PR: 7017949590 PRLI: 0001 CONT’D
NSN/MATERIAL:4710LLNCB6720
DELIVERY (IN DAYS):0011
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
N01DLA
FLEET READINESS CENTER DLA
PSC 8021
CHERRY POINT NC 28533-0021
US
FREIGHT SHIPPING ADDRESS:
N01DLA
FLEET READINESS CENTER DLA
BEACHEY ROAD, BUILDING 148, BAY C
CHERRY POINT NC 28533-5040
US
Need Ship Date:00/00/0000 Original Required Delivery Date:08/18/2026
SPEFA5-26-T-1008 NSN/Part Number: 4710-LL-NCB-6720 Quantity: 2 EA Purchase Request: 7017949590QTY: 2 Delivery: 11 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 488190
New
DIBBS
INSULATION SLEEVING, TH
Solicitation # SPE8E6-26-T-4496
This contract is for the procurement of 52 units of Type I preformed pipe thermal insulation sleeving made of fibrous glass, conforming to MIL DTL 32585. The specified dimensions for the sleeving are 1.500 inches in thickness, 1.900 inches in inside diameter, and 36.000 inches in length. The items are identified by NSN 5640-00-841-5217 and must be delivered to DLA Distribution San Joaquin in Tracy, California. A critical requirement for vendors is the submission of a Health Hazard Assessment approved by the Navy Marine Corps Public Health Center at the time of the offer. The contract mandates adherence to DLA packaging requirements and MIL-STD-129 for marking and labeling. Delivery is expected within 167 days, with a required delivery date of May 7, 2027. Quality compliance is managed through a Certificate of Quality Compliance and specific Technical Data Package requirements.
DLA DIST SAN JOAQUIN

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 488190
New
DIBBS
TUBE
Solicitation # SPEFA5-26-T-1068
This contract is for the procurement of one tube, identified by NSN 1560-LL-NCB-5975 and Bell Textron Inc part number 212-063-505-101. The item is designated as a critical application item with no shelf life requirement. Delivery is required within 84 days, with a final required delivery date of March 1, 2027, shipped FOB destination to the Fleet Readiness Center DLA in Cherry Point, North Carolina. The agreement mandates strict adherence to DLA technical and quality requirements, including RP001 for packaging and RQ001 for higher level quality standards. Sampling must follow MIL-STD-1916 or ASQ H1331, and packaging must comply with ASTM D3951 and MIL-STD-129. The contract specifies a zero percent quantity variance and requires inspection and acceptance to take place at the destination.
DLA FLEET READINESS CENTER DLA PSC

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
HOSE RUBBER AE701-6
Solicitation # SPEFA5-26-T-1072
This contract is for the procurement of 220 inches of rubber hose, part number AE701-6 from Eaton Aeroquip LLC, under solicitation number SPEFA5-26-T-1072. The order is managed by the DLA Fleet Readiness Center and specifies a delivery timeframe of 9 days after order. The material has no shelf life requirement and allows for a quantity variance of plus or minus 10 percent. Technical and quality standards are governed by the DLA Master List, with specific requirements for physical identification and packaging according to ASTM D3951, MIL-STD-129, and RP001. Sampling must comply with MIL-STD-1916 or ASQ H1331. Inspection and acceptance will take place at the destination, with shipping directed to the Fleet Readiness Center DLA in Cherry Point, North Carolina.
DLA FLEET READINESS CENTER DLA PSC

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
HOSE ASSY
Solicitation # SPEFA5-26-T-1070
This contract is for the procurement of two hose assemblies, identified by NSN 1560LN0035610 and Bell Textron Inc part number 70-061F000Z140A. The item is designated as a critical application item with no shelf life requirement. Delivery is required within 84 days, with a final required delivery date of March 1, 2027. The shipment is set for FOB destination, with both inspection and acceptance occurring at the destination in Cherry Point, North Carolina. The contract mandates strict adherence to DLA technical and quality requirements, including specific packaging standards under ASTM D3951 and MIL-STD-129, and palletization per RP001. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, with zero non-conformances required for acceptance unless otherwise specified. The procurement is managed by the DLA Fleet Readiness Center under solicitation number SPEFA5-26-T-1070.
DLA FLEET READINESS CENTER DLA PSC

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A6-26-U-3653
This solicitation, issued by the Department of Defense ASC Commodities Division, is for the procurement of 1,513 blind rivets under NSN 5320-01-606-9619. The contract is designated as a total small business set-aside under NAICS code 488190 and is being procured as fully competitive in accordance with military or federal specifications. Delivery is required within 144 days after the order is placed. The agreement incorporates several technical and quality requirements, including DLA packaging standards, physical identification and bare item marking, and the removal of government identification from non-accepted supplies. While covered defense information potentially applies, item unique identification is not required per the service customer's request. The solicitation was posted on September 2, 2026, with a response deadline of September 17, 2026.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 488190
New
DIBBS
EXTRUDED RUB SEAL MIL-
Solicitation # SPEFA5-26-T-1069
This contract is for the procurement of an extruded rubber seal, part number 110-004-25, conforming to MIL-R-6855 Class 2 Type A Grade 50 specifications. The order consists of 6 feet of material, with a permitted quantity variance of plus 10 percent and minus 0 percent. A certificate of quality conformance is required, and the material must be packaged according to ASTM D3951 and DLA packaging requirements to prevent damage during shipment. The delivery is set for FOB Destination to the Fleet Readiness Center East in Cherry Point, North Carolina, with a required delivery date of September 4, 2026, and a delivery window of 5 days after receipt of order. Quality assurance and sampling must adhere to MIL-STD-1916 or ASQ H1331 standards. The item does not have a shelf life requirement and must be shipped via the fastest traceable means, specifically excluding parcel post.
Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
SUPPORT
Solicitation # SPEAF5-26-T-1064
This contract is a solicitation from the Department of Defense, specifically the DLA Fleet Readiness Center, for the procurement of two units of material identified by NSN 1560-LL-NCB-5342 and associated Bell Textron Inc part numbers. The agreement specifies a delivery timeframe of 15 days and requires delivery FOB destination to Cherry Point, North Carolina. There is no shelf life requirement for this material, and the quantity variance is set at plus or minus 0 percent. Technical and quality compliance is governed by the DLA Master List of Technical and Quality Requirements, with specific adherence to MIL-STD-130N for identification marking and RP001 for packaging. Sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-based sampling plan unless otherwise specified. Packaging must comply with ASTM D3951 and MIL-STD-129, and palletization must align with DLA procurement requirements.
DLA FLEET READINESS CENTER DLA PSC

POSTED

about 18 hours ago

DEADLINE

in 8 days
View Details
NAICS: 488190
New
DIBBS
BAR, BORING TOOL
Solicitation # SPE8E5-26-T-4197
This contract is for the procurement of 16 boring tool bars, identified by NSN 3460-01-625-8849 and part number OMT-GD54 from Leblond Ltd. The order is managed under solicitation SPE8E5-26-T-4197 for the Department of Defense, with delivery required at the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The required delivery date is May 24, 2027, with a shipping window of 167 days. The agreement mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129. It includes a prohibition on the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions. Technical and quality requirements are governed by the DLA Master List, and the contract specifies FOB Origin shipping with inspection and acceptance occurring at the destination.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 488190
New
DIBBS
SPREADER, SLING
Solicitation # SPE8EE-26-T-2522
Contract SPE8EE-26-T-2522 is a solicitation for the procurement of sling spreaders, specifically part number EP-0015815 from Independent Rough Terrain Center LLC, identified by NSN 3940016261016. The agreement covers two line items, each for a quantity of one unit, with a required delivery date of September 4, 2026. Delivery is required within 20 days after the order, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The contract mandates strict adherence to DLA packaging requirements, including ASTM D3951 and MIL-STD-129 for marking and labeling. Shipments must be sent via traceable means to designated locations at Joint Base Lewis McChord in Washington. Technical and quality requirements are governed by the DLA Master List, and the contract includes provisions for the handling of covered defense information and the removal of government identification from non-accepted supplies.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 488190
New
DIBBS
SLING, EYE
Solicitation # SPE8EE-26-T-2501
This contract, identified as solicitation SPE8EE-26-T-2501, is for the procurement of 31 units of Eye Slings, identified by NSN 3940-01-626-0971 and part number EP-0010593 from Independent Rough Terrain Center LLC. The order is managed by the Department of Defense under purchase request 7018160545, with a required delivery date of December 7, 2026, and a need ship date of March 1, 2027. Delivery is set for 167 days after order, with FOB origin and inspection and acceptance occurring at the destination. The shipment is to be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Compliance with the DLA Master List of Technical and Quality Requirements is mandatory, specifically referencing RA001, RD003, RP001, and RQ011. Packaging must adhere to ASTM D3951 and MIL-STD-129, with DLA packaging requirements taking precedence. The contract specifies a zero percent quantity variance for the order.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 488190
New
DIBBS
7085-T7651 PLATE AMS43
Solicitation # SPEFA5-26-T-1067
This contract is for the procurement of one 7085-T7651 aluminum plate measuring 4.5 by 4.5 by 120 inches, conforming to AMS4329 Revision C. The order is issued by the Defense Logistics Agency for delivery to the Fleet Readiness Center East in Cherry Point, North Carolina. A certificate of quality conformance and specific metal certification data are required, and the material must be marked and identified according to RQ017. The supplier must adhere to DLA packaging requirements and ASTM D3951 to prevent damage during shipment, with labeling following MIL-STD-129. Quality sampling must comply with MIL-STD-1916 or ASQ H1331. Delivery is required within five days after receipt of the order, with the final inspection and acceptance occurring at the destination.
Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

in 8 days
View Details
NAICS: 488190
New
DIBBS
HOSE RUBBER AE701-6
Solicitation # SPEFA5-26-T-1071
This contract is for the procurement of 220 inches of rubber hose, part number AE701-6 from Eaton Aeroquip LLC, under solicitation number SPEFA5-26-T-1071. The material is identified by NSN 4720-LL-NCA-2000 and is destined for the Fleet Readiness Center DLA in Cherry Point, North Carolina. Delivery is required within 9 days after the order, with a quantity variance allowance of plus or minus 10 percent. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards per ASTM D3951 and RP001, and marking requirements per MIL-STD-129. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. The material has no shelf life requirement.
DLA FLEET READINESS CENTER DLA PSC

POSTED

about 18 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → DLA FLEET READINESS CENTER DLA PSC

Same awarding agency

NAICS: 488190
New
DIBBS
SKIN AIRCRAFT
Solicitation # SPEAF5-26-T-1065
This contract, identified as solicitation SPEFA5-26-T-1065, is for the procurement of two aircraft skin units from Bell Helicopter under part number 205-032-104-133. The order is managed by the DLA Fleet Readiness Center and specifies a delivery timeframe of 11 days after order. The items are to be delivered FOB destination to Cherry Point, North Carolina, with a required delivery date of October 10, 2026. The agreement mandates strict adherence to DLA technical and quality requirements, including MIL-STD-130N for identification marking and ASTM D3951 for packaging. Quality assurance will be conducted via sampling methods consistent with MIL-STD-1916 or ASQ H1331. Notably, the material has no shelf life requirement, and item unique identification is not required by the service customer.
Other Support Activities for Air Transportation

POSTED

about 18 hours ago

DEADLINE

in 8 days
View Details
NAICS: 488190
New
DIBBS
FLEX DUCT ASSEMBLY
Solicitation # SPEFA5-26-T-1066
This contract is for the procurement of 10 Flex Duct Assemblies, part number 126657-914, under solicitation SPEFA5-26-T-1066. The items are identified by NSN 2835-LL-NC0-4571 and are manufactured by Honeywell International Inc. Delivery is required within 132 days, with a required delivery date of September 1, 2026. The shipment is destined for the Fleet Readiness Center DLA in Cherry Point, North Carolina, with both inspection and acceptance occurring at the destination. The contract mandates strict adherence to DLA packaging requirements, specifically ASTM D3951 and MIL-STD-129 for marking and labeling. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, and identification marking must follow MIL-STD-130N. There is no shelf life requirement for this material, and the quantity variance is set at plus or minus 0 percent.
Other Support Activities for Air Transportation

POSTED

about 18 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332999
New
DIBBS
Supply of SETSCREW (NSN: 5305LINCC3746)The Department of Defense, through the DLA Fleet Readiness Center DLA PSC, is seeking a subcontract for the supply of 20 units of military-specification setscrews under NSN 5305LINCC3746. The items must strictly comply with MIL-STD-129 and MIL-STD-130N, with inspection requirements adhering to MIL-STD-1916 or ASQ H1331. This procurement falls under NAICS code 332999 and specifies Cherry Point, zip code 28533-0021, as the place of performance. The solicitation was posted on August 31, 2026, and the deadline for responses is September 8, 2026.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 339999
New
DIBBS
Supply of NSN 1560LN0031870 (SKIN)This subcontract involves the manufacture or sourcing of one unit of a physical item identified as SKIN under NSN 1560LN0031870. The procurement is managed by the Department of Defense through the DLA Fleet Readiness Center DLA PSC and must adhere to all DLA technical, quality, packaging, and delivery requirements. The project falls under NAICS code 339999 and is designated for performance in Cherry Point, ZIP code 28533-0021. The solicitation was posted on August 31, 2026, with a response deadline of September 8, 2026.
All Other Miscellaneous Manufacturing

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 488190
New
DIBBS
PLATE, ID
Solicitation # SPEFA5-26-T-1049
This contract is a solicitation for one unit of a PLATE, ID, identified by NSN 9905LN0013089 and part number 42555-236-18 from Triumph Gear Systems Inc. The delivery is required within 27 days after order, with a final required delivery date of October 30, 2026. The item is to be delivered FOB Destination to the Fleet Readiness Center DLA in Cherry Point, North Carolina. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, specifically citing MIL-STD-130N for identification marking and RP001 for packaging. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following RP001 guidelines. Quality assurance and sampling will be conducted according to MIL-STD-1916 or ASQ H1331, and the material is noted to have no shelf life requirement. Item Unique Identification is not required for this specific order.
Other Support Activities for Air Transportation

POSTED

3 days ago

DEADLINE

in 6 days
View Details
NAICS: 488190
New
DIBBS
SKIN
Solicitation # SPEFA5-26-T-1052
This contract, solicitation number SPEFA5-26-T-1052, is for the procurement of one unit of a critical application skin, identified by NSN 1560-LN-003-1870 and Sikorsky Aircraft Corporation part number 65213-03004-109. The item is to be delivered to the Fleet Readiness Center DLA in Cherry Point, North Carolina, with a delivery timeframe of 84 days and a required delivery date of February 13, 2027. The agreement mandates strict adherence to DLA Master List technical and quality requirements, specifically referencing RA001, RP001, RQ001, and RQ017. Quality assurance will be governed by MIL-STD-1916 or ASQ H1331 sampling plans, with a zero-nonconformance requirement for acceptance. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow RP001 standards. The material has no shelf life requirement and is subject to inspection and acceptance at the destination.
Other Support Activities for Air Transportation

POSTED

3 days ago

DEADLINE

in 6 days
View Details
NAICS: 488190
New
DIBBS
ID PLATE
Solicitation # SPEFA5-26-T-1054
This contract is for the procurement of 35 units of ID plates, identified by part number 99-5000-70 and NSN 9905LLNC14456. The order is issued by the DLA Fleet Readiness Center and specifies a delivery timeframe of 13 days. Delivery is set as FOB Destination, with both inspection and acceptance occurring at the destination in Cherry Point, North Carolina. The manufacturer must adhere to strict quality and sampling standards, specifically MIL-STD-1916 or ASQ H1331, with a zero-based sampling plan. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow the DLA Packaging Requirements for Procurement. The material has no shelf life requirement, and the contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements.
Other Support Activities for Air Transportation

POSTED

3 days ago

DEADLINE

in 6 days
View Details