Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

TUBE ASSEMBLY, METAL

Active
SPE7M4-26-T-439YFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of 63 metal tube assemblies, specifically number 4 cylinder fuel injection lines used on 6.5 liter diesel engines. These are identified as critical application items and correspond to General Motors part number 14098634 and AM General part number 5742553, under NSN 4710-01-412-1669. The order is managed by the Department of Defense Fluid Handling Division under solicitation SPE7M4-26-T-439Y. Delivery is required within 120 days, with a need ship date of September 17, 2026, and an original required delivery date of June 26, 2027. The items are to be delivered FOB Origin and inspected and accepted at the destination, which is the DLA Distribution New Cumberland facility in Pennsylvania. Compliance with DLA packaging requirements, MIL-STD-2073-1E for preparation, and MIL-STD-129 for marking is mandatory.

General Info

Procurement of 63 metal tube assemblies for 6.5L diesel engines by 2027.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

332996 - Fabricated Pipe and Pipe Fitting ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

(1)

SPE7M4-26-T-439Y.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FLUID HANDLING DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → FLUID HANDLING DIVISION
View Agency Profile
Office AddressUSA
Contacts
Rory O'Reilly
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
TUBE ASSEMBLY,METAL
TUBE ASSEMBLY<(>,<)> METAL
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
#4 CYLINDER FUEL INJECTION LINE USED ON 6.5
LITER DIESEL ENGINE.
CRITICAL APPLICATION ITEM
GENERAL MOTORS LLC 7X677 P/N 14098634
AM GENERAL LLC 34623 P/N 5742553
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018495916 0001 EA 63.000
NSN/MATERIAL:4710014121669
DELIVERY (IN DAYS):0120
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:BL CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:JC CUSH/DUNN THKNESS:D
UNIT CONT:D3 OPI:O
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
SPE7M4-26-T-439Y
SECTION B
PR: 7018495916 PRLI: 0001 CONT’D
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:09/17/2026 Original Required Delivery Date:06/26/2027
SPE7M4-26-T-439Y NSN/Part Number: 4710-01-412-1669 Quantity: 63 EA Purchase Request: 7018495916QTY: 63 Delivery: 120 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332996
New
DIBBS
STRAINER, SEDIMENT
Solicitation # SPE7M3-26-T-9390
DLA Land And Maritime is soliciting quotes for the procurement of sediment strainers under solicitation number SPE7M326T9390. The requirement consists of two line items: 14 units to be delivered within 348 days after order and one unit to be delivered within 120 days after order, both shipping to DLA Distribution W1A8. This combined procurement opportunity is categorized under NAICS code 332996 and is open to all responsible sources. Interested parties must submit their quotes electronically by the deadline of October 5, 2026. All inquiries and submissions should be directed to the buyer via the DLA Dibbs portal.
FLUID HANDLING DIVISION

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
ELBOW, PIPE
Solicitation # SPE7M1-26-T-380E
This contract is for the procurement of six chrome molybdenum steel pipe elbows under full and open competition. The items must be ASTM A234 Grade WP11, featuring a 90 degree flow angle, 2.5 inch nominal pipe size with buttweld ends, long radius, schedule 80, and a wall thickness of .276 inch. The products must adhere to the ANSI standard for factory-made wrought steel buttwelding fittings and ASME B16.9 Revision N. The order is identified by NSN 4730002493956 and requires delivery to the USNS Rappahannock within 20 days. Packaging must comply with ASTM D3951 and MIL-STD-129, while adhering to DLA packaging requirements. Additionally, the contract prohibits the use of class I ozone depleting chemicals and mandates compliance with DLA master list technical and quality requirements. Inspection and acceptance will take place at the destination.
MARITIME SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
CLAMP, HOSE
Solicitation # SPE7M3-26-T-9379
The Department of Defense, through DLA Land And Maritime, is seeking quotes for the procurement of 50 hose clamps under NSN 4730012150630. The items are to be delivered to DLA Distribution W1A8 within 329 days after the order is placed. The approved source for this requirement is 00624 93J03-62-788-1. This opportunity is being conducted as a Request for Quote under solicitation number SPE7M326T9379 with a response deadline of October 5, 2026. All quotes must be submitted electronically via the provided link, as hard copies of the solicitation and technical drawings are not available. Interested responsible sources should direct inquiries to the primary point of contact via the DIBBS portal.
FLUID HANDLING DIVISION

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
NUT, TUBE COUPLING
Solicitation # SPE7M4-26-T-436L
This contract is for the procurement of tube coupling nuts made from 304 steel, identified by NSN 4730-00-919-4651. The requirement is split into two line items totaling 97 units, with 48 units destined for DLA Distribution Cherry Point and 49 units for DLA Distribution Depot Oklahoma. The items are classified as commercial products and are subject to strict quality standards, including the use of Class 3 threads and compliance with PRI Qualified Manufacturer Lists (QML) or Qualified Products Lists (QPL). The agreement mandates adherence to specific technical and quality requirements, including the prohibition of intentionally added mercury and Class I ozone-depleting chemicals. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with palletization following DLA packaging requirements. Delivery is set for 99 days after order, with shipping terms as FOB Origin and inspection and acceptance occurring at the destination. Sampling and quality assurance will follow MIL-STD-1916 or ASQ H1331 standards.
FLUID HANDLING DIVISION

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
SLEEVE, CONNECTING, NON-
Solicitation # SPE7M4-26-T-434Q
This contract is for the procurement of 160 non-metallic connecting sleeves, identified by NSN 4730001730344 and BEMCO part number BE590A9-13. The item is designated as a critical application item. The delivery is required within 226 days after the order, with a need ship date of May 20, 2027, and a final required delivery date of June 3, 2027. The shipment is to be delivered FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB. The supplier must adhere to specific technical and quality requirements outlined in the DLA Master List, including RP001 for packaging and MIL-STD-129 for marking and labeling. Packaging must comply with ASTM D3951, though DLA Master List requirements take precedence. Inspection and acceptance will occur at the destination. The contract is managed by the Department of Defense Fluid Handling Division under solicitation number SPE7M4-26-T-434Q.
FLUID HANDLING DIVISION

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
ADAPTER, STRAIGHT, TUBE
Solicitation # SPE7M3-26-T-9396
This contract is for the procurement of 17 straight tube-to-hose adapters, identified by NSN 4730015154631 and associated with HydraSearch Company part numbers 4-4721-8-6 and EF-1600A-0806. The order is issued by the Department of Defense Fluid Handling Division under solicitation SPE7M3-26-T-9396, with a required delivery date of May 29, 2027, and a delivery window of 168 days. Shipping is FOB Origin and the items are to be delivered to DLA Distribution San Joaquin in Tracy, California. The contract mandates strict compliance with mercury-free requirements, prohibiting the intentional addition of mercury or mercury compounds unless specifically exempted for functional use by NAVSEA. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements. Technical and quality standards are governed by the DLA Master List, and the contract specifies a zero percent quantity variance for the order.
FLUID HANDLING DIVISION

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
RESTRICTOR, FLUID FLOW
Solicitation # SPE7M3-26-T-9384
This contract is for the procurement of 23 units of fluid flow restrictors under solicitation number SPE7M3-26-T-9384 for the Department of Defense Fluid Handling Division. The items are identified by NSN 4730-01-216-9121 and are associated with part numbers from Walker Power Systems, Artemis Electronics, and Robertshaw Controls. Delivery is required within 168 days, with a required delivery date of February 3, 2027, and a need ship date of March 23, 2027. The shipment is to be delivered FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA packaging requirements, specifically ASTM D3951 and MIL-STD-129, with RP001 and the DLA Master List of Technical and Quality Requirements taking precedence. A critical environmental restriction prohibits the use of Class I ozone depleting chemicals in the delivered items, requiring approved substitutes if necessary. Inspection and acceptance will take place at the destination, and the contract allows for zero quantity variance.
FLUID HANDLING DIVISION

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
NUT, TUBE COUPLING
Solicitation # SPE7M3-26-T-9431
This contract, identified by solicitation number SPE7M3-26-T-9431, is for the procurement of 13 units of tube coupling nuts, specifically bonnet cap nuts made from CRES Type 303 for use in valve end items. The items are identified by NSN 4730-01-058-0956 and correspond to Circor Instrumentation Technologies part numbers 2620-906X10PDC27 and G90438-2. This is designated as a critical application item, and the contract strictly prohibits the intentional addition of mercury or mercury-containing compounds, except where functionally required by NAVSEA specifications. The delivery is set for FOB Origin with a required delivery date of April 13, 2027, and a shipping window of 168 days. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements RP001. The final destination for shipment is the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Inspection and acceptance will take place at the destination.
FLUID HANDLING DIVISION

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
BUSHING, PIPE
Solicitation # SPE7M2-26-T-7049
This contract is for the procurement of 522 pipe bushings under solicitation SPE7M2-26-T-7049 for the Department of Defense Nuclear Reactor Program. The items must adhere to NSN 4730005406146 and comply with SAE AS4842 Revision B and SAE AS4861 Revision C standards. This is designated as a critical application item and must be produced by an accredited manufacturer listed on the Performance Review Institute qualified manufacturer or product lists. Key requirements include strict adherence to DLA packaging and marking standards, specifically MIL-STD-129 and MIL-STD-2073-1E. The contract prohibits the intentional addition of mercury or mercury-containing compounds unless specifically exempted for functional use. Delivery is set as FOB Origin with a required ship date of March 16, 2027, and a final delivery date of June 3, 2027, to the DLA Distribution facility in New Cumberland, Pennsylvania.
NUCLEAR REACTOR PROGRAM

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
FITTING, PENETRATION
Solicitation # SPE7M3-26-T-9380
This contract is for the procurement of five penetration fittings, identified by NSN 4730012571547 and part number 57601-01 from Triumph Controls, LLC. The item is designated as a critical application item and a restricted source item, requiring engineering source approval from the government design control activity. Delivery is set for 168 days after order, with a required delivery date of February 28, 2027, shipped FOB Origin to DLA Distribution San Joaquin in Tracy, California. The agreement mandates strict adherence to environmental and quality standards, specifically prohibiting the use of class I ozone depleting chemicals and the intentional addition of mercury or mercury containing compounds, with limited exceptions for specific functional components. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements. Technical and quality requirements are governed by the DLA Master List, and any substitute chemicals must be submitted for official approval.
FLUID HANDLING DIVISION

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
STRAINER, SEDIMENT
Solicitation # SPE7M3-26-T-9378
This contract is for the procurement of two 4-inch Y-type sediment strainers with a 250 PSI rating, identified by NSN 4730-01-214-8857. The hardware must feature a nominal face-to-face length of 15.625 inches, a body constructed from UNS C92200 bronze, and a Monel basket of 18 gage with 3/32 perforation. Flanges must comply with MIL-F-20042 Class 250. Delivery is required within 168 days after the order is placed. The supplier must adhere to several technical and quality mandates, including DLA packaging requirements, measuring and test equipment standards, and the removal of government identification from non-accepted supplies. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331. Additionally, the items must be entirely free of asbestos and must not contain intentionally added mercury or mercury-containing compounds, except where functionally required by NAVSEA specifications.
FLUID HANDLING DIVISION

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
TEE, PIPE
Solicitation # SPE7M3-26-T-9351
This contract is for the procurement of 32 brass pipe tees with identical female threaded ends, specifically designed for hydraulic applications with a 3/4 inch nominal pipe size. The items must conform to SAE Handbook 1971, SAE J926, and are compatible with Parker-Hannifin part number 3/4MMO-B or Swagelok part number B-12-T. The contract is issued by the Department of Defense Fluid Handling Division under solicitation number SPE7M3-26-T-9351. Delivery is required within 168 days, with a final need ship date of March 23, 2027. Shipping is FOB Origin and the destination for inspection and acceptance is DLA Distribution San Joaquin in Tracy, California. Packaging must adhere to ASTM D3951 and RP001 DLA packaging requirements, with labeling following MIL-STD-129. All technical and quality requirements are governed by the DLA Master List.
FLUID HANDLING DIVISION

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

NAICS: 333914
New
DIBBS
TUBE, BYPASS
Solicitation # SPE7M4-26-T-435R
This contract is for the procurement of five bypass tubes, identified by NSN 4320007909742 and Eaton Aerospace part number DS-933252. The order is managed by the Department of Defense Fluid Handling Division under solicitation number SPE7M4-26-T-435R. Delivery is required within 168 days, with a need ship date of March 23, 2027, and an original required delivery date of June 15, 2027. The items are to be delivered FOB Origin to the DLA Distribution Depot Hill at Hill AFB, Utah. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, specifically citing packaging requirements RP001 and the removal of government identification from non-accepted supplies RQ011. Packaging must comply with ASTM D3951 and MIL-STD-129. Quality assurance will be managed through sampling methods per MIL-STD-1916 or ASQ H1331, with a zero-tolerance policy for non-conformances in sample lots. Additionally, the use of Class I ozone-depleting chemicals is strictly prohibited.
Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333998
New
DIBBS
FILTER ELEMENT, FLUID
Solicitation # SPE7M4-26-T-436W
This contract is for the procurement of 11 fluid filter elements under solicitation number SPE7M4-26-T-436W for the Department of Defense Fluid Handling Division. The items are identified by NSN 4330-01-049-8685 and correspond to part numbers M610P1UUB from Porous Media Corporation or MCY1001DCH13 from Pall Aeropower Corp. These are designated as critical application items. Delivery is required within 168 days, with a need ship date of March 23, 2027, and a final delivery date of March 28, 2027. Shipping is FOB Origin and destined for the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Packaging must comply with ASTM D3951 and MIL-STD-129, while adhering to DLA packaging requirements RP001 and technical quality standards RA001. Inspection and acceptance will take place at the destination.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
PACKING, PREFORMED
Solicitation # SPE7M4-26-T-436D
This contract, identified as SPE7M4-26-T-436D, is for the procurement of 124 units of preformed packing, identified by NSN 5330-01-020-5183. The order is issued by the Department of Defense Fluid Handling Division with a delivery timeline of 168 days and a required delivery date of February 18, 2027. Shipping is designated as FOB Origin, with the final destination being the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to technical and quality requirements, including MIL-STD-130N for identification marking and MIL-STD-129 for general marking. Specific material restrictions are in place, prohibiting the use of asbestos and the intentional addition of mercury, except in specified functional components. Packaging must comply with MIL-STD-2073-1E and RP001, requiring the items to be sealed in medium duty, waterproof, greaseproof, opaque bags to prevent deterioration from ultraviolet rays. Inspection and acceptance will occur at the destination.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326291
New
DIBBS
SEAL, PLAIN ENCASED
Solicitation # SPE7M4-26-T-435W
This contract is for the procurement of plain encased seals, identified by NSN 5330007252188. The total quantity requested is 628 units, split between two line items of 297 and 331 units. The items are designated as critical application components and must be free of asbestos. Delivery is required within 215 days, with shipping destinations including DLA Distribution centers at Cherry Point, NC, and San Diego, CA. The agreement mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-129 and MIL-STD-2073-1E. Because the materials are susceptible to ultraviolet ray deterioration, they must be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117. Terms include FOB Origin shipping with inspection and acceptance occurring at the destination. The contract is issued by the Department of Defense Fluid Handling Division under solicitation number SPE7M4-26-T-435W.
Rubber Product Manufacturing for Mechanical Use

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 114119
New
DIBBS
WINDSHIELD WIPER ASSEM
Solicitation # SPE7M4-26-T-442W
DLA Land And Maritime is soliciting quotes for the procurement of four windshield wiper assemblies under NSN 2090200003421. The contract, identified by solicitation number SPE7M426T442W, specifies an approved source of 35076 862609 and requires delivery to DLA Distribution within 168 days after the order is received. This is a combined solicitation available electronically via the provided link, with no hard copies or separate technical drawings available. All responsible sources may submit electronic quotes by the deadline of October 5, 2026. Inquiries regarding this requirement should be directed to the buyer via the DIBBS portal.
Other Marine Fishing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333618
New
DIBBS
NOZZLE, FUEL INJECTION
Solicitation # SPE7M4-26-T-441M
The Department of Defense, through DLA Land and Maritime, is soliciting quotes for the procurement of 357 fuel injection nozzles under NSN 2910014608973. This requirement, identified by solicitation number SPE7M426T441M, is set aside for SBA Certified Women-Owned Small Businesses. The items must be delivered to DLA Distribution within 95 days after the order is received. Approved sources for this procurement include 02YK8, 1QME2, and 4PNJ5. All interested and responsible sources must submit their quotes electronically by the deadline of October 5, 2026. The solicitation is available as an RFQ via the provided electronic link, and no hard copies or separate technical drawings are available.
Other Engine Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332912
New
DIBBS
ELBOW, TUBE
Solicitation # SPE7M3-26-T-9412
This contract is for the procurement of tube elbows under solicitation SPE7M3-26-T-9412 for the Department of Defense Fluid Handling Division. The requirement consists of two line items for NSN 4730015537849, totaling 66 units, with 18 units destined for DLA Distribution San Diego and 48 units for DLA Distribution Cherry Point. The items are identified as critical application parts, specifically referencing Swagelok part number S-400-2-4ST. Delivery is required within 51 days after the order, with specific need ship dates in July and August 2026. The contract specifies FOB Origin with inspection and acceptance occurring at the destination. Strict quality and packaging standards apply, including compliance with MIL-STD-129, ASTM D3951, and DLA packaging requirements. Additionally, the contract prohibits the use of Class I ozone-depleting chemicals and mandates sampling methods in accordance with MIL-STD-1916 or ASQ H1331.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331512
New
DIBBS
COUPLING HALF, QUICK DI
Solicitation # SPE7M3-26-T-9365
This contract is a solicitation for the procurement of 288 quick disconnect coupling halves under NSN 4730-01-003-5142. The requirement is managed by the Department of Defense Fluid Handling Division and is identified as a Combat Capabilities Development Command Chemical Biological Center item. Delivery is required within 87 days after receipt of order. A specific engineering exception mandates the use of part number VHC4-4FJF when ordering from Parker Hannifin. The contract imposes strict compliance standards, including CMMC Level 2 certification and adherence to DLA master technical and quality requirements. All packaged items must be marked according to MIL-STD-129. Furthermore, the procurement is subject to rigorous export controls under ITAR and EAR regulations, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specific Department of Defense training to handle technical data. All requests for variance or deviations must be approved by the CCDC-CBC.
Steel Investment Foundries

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336413
New
DIBBS
PARTS KIT, MOTOR, ACT
Solicitation # SPE7M4-26-T-434L
DLA Land And Maritime is soliciting quotes for the procurement of nine motor actuator parts kits under NSN 1680001402543. The approved source for this requirement is 62983 914464. Delivery is required to the DLA Distribution Depot Hill within 168 days after receipt of the order. This opportunity is issued as a Request for Quote under solicitation number SPE7M426T434L with a response deadline of October 5, 2026. All quotes must be submitted electronically via the provided link, as hard copies of the solicitation and technical drawings are unavailable. The procurement falls under NAICS code 336413 and is managed by the Department of Defense office located in Columbus, Ohio.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
MANUAL OVERIDE ASBY
Solicitation # SPE7M4-26-T-440Y
The Department of Defense, through DLA Land and Maritime, is seeking quotes for the procurement of five Manual Override Assemblies under NSN 4810014003151. This combined solicitation, identified as SPE7M426T440Y, requires delivery to DLA Distribution within 168 days after the order is placed. Approved sources for this item include 99643 81808-1 and 99643 83410 Item 5. All responsible sources are invited to submit electronic quotes by the deadline of October 5, 2026. The procurement falls under NAICS code 332911 and is managed by the office located in Columbus, Ohio. No hard copies of the solicitation, specifications, plans, or drawings are available, and all submissions must be handled electronically via the provided system links.
Industrial Valve Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS