TUBE ASSEMBLY, METAL

The contract is for a titanium tube assembly, ASTM B338 specification, with a 0.38-inch outer diameter and 0.049-inch wall thickness, seamless and prebent with fittings, to be fabricated in strict accordance with Drawing 53711 5773203 Revision G, where Revision F governs dimensional requirements despite later revisions to other sections. The tube assembly, identified by part number 12.5.3H, and its end connections—connector nut P/N 12.6.2 and connector tail piece P/N 12.6.3—are sourced from specified drawings and parts lists, with fabrication instructions detailed in designated zones. The item is classified as a critical application and subject to stringent quality controls, including mandatory inspection and acceptance at origin, with sampling governed by MIL-STD-1916 or ASQ H1331 Table 1 using zero non-conformances unless otherwise specified, and attributes categorized with verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0. Full compliance with DLA packaging requirements RP001 and MIL-STD-2073-1E is required, including preservation using alcohol ethyl (AE), unit packaging with elastic containers, and marking per MIL-STD-129 with no special marking codes. Mercury and mercury-containing compounds are prohibited except in specified functional components like batteries or instruments, which must include secondary containment as per NAVSEA 5100-003D, and ozone-depleting chemicals are entirely banned. The contract is a fixed-price indefinite delivery contract (IDC) under simplified acquisition procedures, with a guaranteed minimum of five annual quantities and a maximum contract value of $350,000.00, ordered in annual quantities up to 39 units at FOB origin, with delivery expected within 85 days after order. All work must adhere to applicable FAR and DFARS clauses including safeguarding covered defense information per 252.204-7012, cyber incident reporting, electronic payment submission through WAWF, and compliance with restrictions on hexavalent chromium, mandatory arbitration, and procurement from Chinese military companies. Offerors must represent their small business status as part of an SBA set-aside, provide a UEI and CAGE code, and comply with whistleblower protection, data disclosure, and