TUBE ASSEMBLY, METAL

TUBE ASSEMBLY,METAL
Tue Assembly, Metal
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
FULL AND OPEN COMPETITION APPLY
DETAILED DRAWING (ONE ITEM)
THE ITEM DESCRIBED IN THIS SOLICITATION
IS DEFINED IN WHOLE OR IN PART BY ARMY
DRAWING(S). THESE DRAWING(S) MAY CONTAIN
A PAINT FINISHING REQUIREMENT. WHERE SUCH
REQUIREMENTS ARE SPECIFIED, USE DCSC DRAWING
16236 CS-2300-0001 IN LIEU OF FINISH REQUIRE
MENTS OF THE ARMY DRAWING(S). THIS DRAWING
CONTAINS SPECIFICATIONS FOR CHEMICAL AGENT
RESISTANT COATINGS (CARC), AND ADDITIONAL
INFORMATION RELATING TO HIGH TEMPERATURE
COATINGS.
THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH
MUST MEET QPL/QML SPECIFICATIONS.BY SUBMITTING
AN OFFER, THE OFFEROR AGREES TO PROVIDE QPL/QML
COMPONENTS ONLY FROM SOURCES QUALIFIED ON THE
APPLICABLE QPL(S)/QML(S).
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS
SPE7M4-26-T-432G
SECTION B
LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A
SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR
QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN
PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED
MANUFACTURERS LIST (QML)" APPLY.
RT001: MEASURING AND TEST EQUIPMENT
19207) 12270246 EXCEPTIONS TO TECHNICAL DATA DOC NUMBER ,,,,REPLACEMENT
INFORMATION ASME Y14.34M ,,SUPERSEDED BY ASME Y14.34 ASTM A513 ,,,,
REWRITTEN AS ASTM A513/A513M MIL-P-149 ,,,,NO SUPERSEDING DOCUMENT
MIL-P-16232 ,,,,REWRITTEN AS MIL-DTL-16232 MIL-STD-100 ,,,,REPLACED BY
ASME Y14.100, ASME Y14.24, ASME Y14.35M, AND ASME 14.34M MIL-STD-1246 ,,
REPLACED BY IEST-STD-CC1246 MS39166 ,,,,,,SUPERSEDED BY SAE J512
TT-E-489 ,,,,SEE NOTICE 2 FOR REPLACEMENT INFORMATION VV-L-800 ,,,,
REPLACED BY MIL-PRF-32033
A forging process was identified as a means to manufacture this item. Tooling is required to produce a forging. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C<(>&<)>E Supply Chains) https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/; (Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil.
CERTIFICATE OF CONFORMANCE PROCEDURES (FAR 52.246-15) ARE AUTHORIZED, UNLESS WITHELD BY A QUALITY ASSURANCE LETTER OF INSTRUCTION.
CRITICAL APPLICATION ITEM
TDP Rev B Gen 4 IAW BASIC DRAWING NR 19207 12270246 REVISION NR A DTD 05/05/1986 PART PIECE NUMBER: 12270246
TDP Rev B Gen 4 IAW REFERENCE DRAWING NR 16236 CS-2300-0001 REVISION NR B DTD 07/22/1991 PART PIECE NUMBER:
TDP Rev B Gen 4 IAW REFERENCE DRAWING NR 19207 12270246 REVISION NR 09 DTD 09/17/2026 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018038227 0001 EA 1.000
NSN/MATERIAL:4710011364682
DELIVERY (IN DAYS):0010
DELIVER FOB: ORIGIN
SPE7M4-26-T-432G
SECTION B
PR: 7018038227 PRLI: 0001 CONT’D
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W81WRD
0101 CS BN CO A DISTRIBUTI
US ARMY 0101 CS BN CO A DISTRIBUTIO
BLDG 8410 EDWARDS ROAD
FT RILEY KS 66442-0000
US
RDD 555 SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W81WRD
0101 CS BN CO A DISTRIBUTI
US ARMY 0101 CS BN CO A DISTRIBUTIO
BLDG 8410 EDWARDS ROAD
FT RILEY KS 66442-0000
US
MARKFOR
W81WRD
0101 CS BN CO A DISTRIBUTI
US ARMY 0101 CS BN CO A DISTRIBUTIO
BLDG 8410 EDWARDS ROAD
FT RILEY KS 66442-0000
US
M/F: (TCN) W81WRD62310220
RDD: 555
PROJ: 9GU TP 2
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A01 DIST: V ADV: FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:08/24/2026
SPE7M4-26-T-432G
SECTION B
PR: 7018038227 PRLI: 0001 CONT’D
SPE7M4-26-T-432G NSN/Part Number: 4710-01-136-4682 Quantity: 1 EA Purchase Request: 7018038227QTY: 1 Delivery: 10 days ADO