Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

TUBE ASSEMBLY, SUPPO

Awarded

SPE4A1-26-T-1002Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Defense Logistics Agency has awarded a delivery order under contract SPE4A124G0043 to AAR SUPPLY CHAIN, INC with CAGE code 1Y249 for a total price of $14,526.24. The award was made on July 8, 2026, following solicitation SPE4A1-26-T-1002, and pertains to the procurement of a single line item: TUBE ASSEMBLY, SUPPO identified by NSN/Part number 4710016960340 and PR number 7014869957. The contract is classified as a federal award with no designated set aside or NAICS code, and the place of performance and office address details are unspecified, though the contracting agency is located in the United States. The award notice was posted on the DIBBS system, and the full details can be accessed through the provided UI link.

General Info

AAR SUPPLY CHAIN, INC awarded $14,526.24 for TUBE ASSEMBLY, SUPPO NSN 4710016960340 on July 8, 2026.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

423860 - Transportation Equipment and Supplies (except Motor Vehicle) Merchant WholesalersView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(1)

SPE4A726F8636.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded

PostedJul 8

Award Notice

AwardedSep 12

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeUSA

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressUSA

ContactsNo contact information available

Full Description

Show more

DLA award SPE4A726F8636 posted on DIBBS. Awardee: AAR SUPPLY CHAIN, INC (CAGE 1Y249) Total Contract Price: $14,526.24 Award Date: 07-08-2026 Delivery order under: SPE4A124G0043 Solicitation: SPE4A1-26-T-1002 Line items: - TUBE ASSEMBLY, SUPPO (NSN/Part 4710016960340, PR 7014869957)

Similar Contracts

Same NAICS industry code

INVITATION FOR SALE - Surplus Sale - Ground Support Equipment (GSE) & Miscellaneous Related Items

Solicitation # 2026-035-ITS

The Sanford Airport Authority is soliciting sealed bids for the purchase of a single lot of surplus Ground Support Equipment and miscellaneous related items located at Orlando Sanford International Airport. The inventory includes baggage tractors, beltloaders, tow tractors, and various ramp items such as radios, headsets, and cones. All items are sold on an as-is, where-is basis with all faults and without warranties. The contract will be awarded to the highest responsive and responsible bidder who meets or exceeds the minimum reserve price of 400,000 dollars. Bids must be submitted by September 24, 2026, and must include a completed Respondent Questionnaire and proof of financial capability. The successful bidder is required to submit a 10 percent deposit within five business days of the Notice of Intent to Award, with full payment due within ten calendar days of the Notice of Award. Payment must be made via certified check, cashier's check, wire transfer, or ACH. Once payment is complete, the purchaser has five calendar days to submit a removal plan and must remove all equipment from the airport property within 30 calendar days. The purchaser is solely responsible for all logistics, including loading, transportation, and insurance. Minimum insurance requirements include 1 million dollars in Commercial General Liability per occurrence and statutory Workers Compensation coverage, with the City of Sanford and the Sanford Airport Authority named as additional insureds.

POSTED

DEADLINE

Supply of Plain Round Nuts (NSN 5310014817043)

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # W8476-26M419/A

The Department of National Defence is seeking to procure fourteen EMD Forklifts with various configurations for delivery to Canadian Forces Base Dundurn, Trenton, and Borden. The required delivery timeline is 180 days following the award of the contract. This solicitation is restricted to suppliers who hold a Supply Arrangement under RFSA E60HS-21FRKL. Interested offerors must submit their proposals via email to the designated receiving address by the deadline of September 23, 2026. The procurement process allows for submissions in either official language of Canada, and the Crown maintains the right to negotiate with suppliers. Primary contact for this requirement is Contracting Authority Marie-Eve Bouchard.

Department of National Defence

POSTED

DEADLINE

Spare Parts for Airfield Ground Support Equipment 2

Solicitation # W8486-270982/A

The Department of National Defence has issued a notice of proposed procurement for various spare parts intended for Airfield Ground Support Equipment. The requirement includes a diverse range of components such as bushings, filler opening caps, linear actuating cylinders, filters, vehicular heaters, horn buttons, window washer nozzles, leaf spring shackle pins, electrical solenoids, speed switches, gas springs, engine starters, switches, and vehicular windows. These items are to be delivered to the Canadian Forces Supply Depots in either Edmonton, Alberta, or Montreal, Quebec, with a requested delivery deadline of December 31, 2026. Prospective offerors must submit their bids in Canadian dollars, ensuring that prices exclude applicable taxes but include all delivery costs, Canadian customs duties, and excise taxes. Submissions must be made electronically via email to the designated receiving address. While specific part numbers and NCAGE codes are provided, suppliers proposing equivalent or substitute products must clearly identify the brand name, model, part number, and NCAGE of the offered item. The Crown maintains the right to negotiate with suppliers, and offerors may request a debriefing regarding the solicitation results within fifteen business days of receiving the outcome.

Department of National Defence

POSTED

DEADLINE

Halifax-class Main Lube Oil System Spares

Solicitation # W8482-275494/A

The Department of National Defence is soliciting offers under solicitation number W8482-275494 for Halifax-class Main Lube Oil System Spares to support the starboard main lube oil coolers. The requirement consists of four line items: two Bush Front Covers (part number WE17027) and two Pneumatic Control Assemblies (part number WE20158-GA-NPT), both associated with Walton Engineering Co Ltd. These items are to be distributed between CFB Halifax and CFB Esquimalt, with specific quantities allocated to each location. Interested bidders must submit their proposals by September 17, 2026, including the Offeror Submission Details in both Excel and PDF formats, along with the Offeror Submission and Declaration forms. The procurement allows for the proposal of equivalent or substitute products provided the brand name, model, part number, and NCAGE are specified. The process includes detailed requirements for quality assurance, packaging, and potential controlled goods or hazardous materials certifications as outlined in the Statement of Requirements.

Department of National Defence

POSTED

DEADLINE

Aviation Replacement Parts for the Various Aircrafts

Solicitation # W8485-279587/A

The Department of National Defence, through the Directorate of Aerospace Procurement, is seeking to acquire six aviation replacement parts for various aircraft under solicitation W8485-279587/A. This procurement is restricted to qualified holders of Supply Arrangement W8485-184741 series, and a specific list of invited companies, including Honeywell Ltd, Rockwell Collins Canada, and PAL Aerospace, have been asked to submit proposals. The request for proposal documents are distributed directly by the contracting officer via email rather than through the Government Electronics Tendering System. Interested parties must submit their responses by September 15, 2026. Inquiries are directed to Ivan Khanzadeev, while those seeking to become qualified for the overarching Supply Arrangement may contact Megan McCandless.

Department of National Defence

POSTED

DEADLINE

26-04060TD S70 MT & CT HPU Overhaul Material IFB

Solicitation # 26-04060TD

The Utah Transit Authority (UTA) has issued a firm fixed-price Invitation for Bids (IFB) to procure materials necessary for the overhaul and update of Hydraulic Power Units (HPUs) for its fleet of 77 Siemens S70 Light Rail Vehicles. The objective is to ensure reliable service for an additional 15 years through the replacement of wearable items and pump motors, with the actual overhaul work to be performed by UTA personnel. The contractor is required to provide materials packaged as complete kits; individual parts will not be accepted. Specifically, the procurement includes Kit A for Motor Truck HPUs, Kit B for Non-Power or Center Truck HPUs, and Kit C for updating MT/CT HPUs with Interface Blocks and pump motor half-life replacements. All parts must meet or exceed OEM specifications, maintenance manual requirements, and the standards detailed in the solicitation. Bids are due by October 8, 2026, at 3:00 pm via the Euna portal, and the award will be granted to the lowest responsive and responsible bidder based on the bid price of the parts. To be considered responsive, submissions must include a technical bid limited to 25 pages, a bid sheet, and all required signed forms and certifications. The contractor must maintain a Quality Assurance Program and provide completed test documents to certify that all materials meet specifications prior to delivery, which is FOB to a UTA-designated destination. This contract includes strict compliance with federal regulations, including the Build America, Buy America Act, ADA standards, and record retention requirements under 2 C.F.R. § 200.334. Payment for approved invoices will be issued within 30 calendar days of submittal.

POSTED

DEADLINE

Aviation Maintenance Parts IDIQThe Aviation Maintenance Parts IDIQ is a forecasted contract initiated by the Department of State to establish an Indefinite Delivery, Indefinite Quantity vehicle for aviation parts and services. The primary objective of this procurement is to create a more efficient sourcing mechanism that provides faster and more cost-effective access to essential aviation components. Classified under NAICS code 423860, the contract is designed to streamline the acquisition process for maintenance requirements, ensuring that necessary parts are available to support aviation operations without the delays associated with traditional procurement methods. This forecast was posted on August 20, 2026, and serves as an advance notice for potential industry participants. Interested parties can coordinate with designated points of contact, including Jamillah Timmons and Small Business Specialist Tyler Sinclair, for further inquiries. While specific set-aside details are not currently defined, the initiative represents a strategic effort by the Department of State to optimize its supply chain for aviation maintenance through a flexible and responsive contracting framework.

State, Department Of

POSTED

DEADLINE

Transit Coach Fluids & Absorbent

Solicitation # 107-2026

The Southwest Ohio Regional Transit Authority (SORTA), operating as Cincinnati Metro, has issued solicitation 107-2026 for Transit Coach Fluids and Absorbent. This procurement is managed by the Maintenance agency in Cincinnati, Ohio, with a response deadline of September 16, 2026. The scope of work involves the delivery of specialized fluids and absorbents to support a fleet of approximately 390 vehicles, including fixed-route, paratransit, and micro-transit buses serving Hamilton, Butler, Clermont, and Warren Counties. The contractor is required to be fully qualified to perform these services in compliance with federal, state, and local laws, providing all necessary work products, manuals, and warranties. The contract is governed by custom terms and conditions rather than standard FAR clauses, emphasizing strict compliance with the Americans with Disabilities Act, the Clean Air Act, the Clean Water Act, and FTA drug and alcohol testing regulations. Key administrative requirements include the designation of an approved Project Manager, the maintenance of adequate liability insurance, and a commitment to maximize the participation of small and disadvantaged businesses. Invoices must be submitted in writing to the SORTA Accounts Payable Department in Cincinnati and must include a valid purchase order number. Performance is subject to inspection and acceptance by SORTA, with a strong emphasis on equal employment opportunity and non-debarment certifications.

POSTED

DEADLINE

Train Control Grade Crossing Spare Parts

Solicitation # 269-2027-2053

The City of Charlotte is soliciting bids under solicitation number 269-2027-2053 for the procurement and supply of Train Control Grade Crossing Spare Parts to support the Charlotte Area Transit System (CATS) in North Carolina. The primary objective is the delivery of compatible spare parts necessary for the operation of train control systems at grade crossings. The place of performance is located within North Carolina, specifically for the City of Charlotte and CATS. All submissions must be completed electronically through the Bonfire Procurement Portal by the response deadline of September 14, 2026. The solicitation was posted on August 17, 2026, and Andre Branch serves as the primary point of contact. While the procurement is for tangible goods, the provided documentation does not specify the contract value, detailed part lists, specific delivery schedules, or particular evaluation criteria. Vendors are instructed to use the Bonfire portal for all proposal uploads and to submit any clarifying questions through the portal's Vendor Discussions section.

City Of Charlotte

POSTED

DEADLINE

RFP for Non-CDL Aerial Bucket Truck

Solicitation # 261709

The City of Hartsville is soliciting sealed bids for the procurement of a new, unused, current production non-CDL aerial bucket truck. Interested parties must submit their bids to City Hall at 100 E. Carolina Ave., Hartsville, South Carolina, ensuring that all submissions are clearly marked as RFP for Non-CDL Aerial Bucket Truck. The deadline for responses is September 17, 2026, at 6:00 PM. For further inquiries, the primary point of contact is Matt Mills, who can be reached via email or phone. This solicitation is managed by the City of Hartsville within the state of South Carolina.

City Of Hartsville

POSTED

about 1 month ago

DEADLINE

Supply of Life Preserver Vest (NSN 4220014873619)

Defense Logistics Agency

POSTED

about 1 month ago

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Military-Grade Packaging and Palletization Services

Packaging and Labeling Services

POSTED

about 13 hours ago

DEADLINE

Supply of Uninterruptible Power Supplies (UPS)

Motor and Generator Manufacturing

POSTED

about 13 hours ago

DEADLINE

MIL-SPEC Packaging and Hazardous Material Shipping

Freight Transportation Arrangement

POSTED

about 13 hours ago

DEADLINE

Supply of Battery Assembly (6140-01-664-6369)

Storage Battery Manufacturing

POSTED

about 13 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2418

This contract, identified as SPE7L7-26-Q-2418, is a firm fixed price solicitation by the Defense Logistics Agency for the procurement of sealed lead acid storage batteries (NSN 6140-01-624-9682). The requirement consists of two line items totaling eight units, with delivery expected 60 days after the order. This is a restricted source item requiring government engineering source approval, and it is designated as a critical application item. The batteries have a non-extendable shelf life of 12 months and must comply with specific hazardous material communication and packaging standards, including MIL-STD-2073-1E and MIL-STD-129. Quality assurance will be managed via zero-based sampling plans according to MIL-STD-1916 or ASQ H1331. Shipments are destined for locations in Oregon and Hawaii, with strict prohibitions against the intentional addition of mercury except where functionally required.

Battery Manufacturing

POSTED

about 13 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2419

This contract is a solicitation for the procurement of five storage batteries, part number PS-12100 F1 from Power-Sonic Corporation, under NSN 6140-01-294-6528. The items are designated as critical application items and must feature F1 quick disconnect tabs. The contract is established as a firm fixed price agreement with a delivery requirement of 60 days after the order is placed. Each unit is destined for a specific naval vessel, including the USS Stout, USS Laboon, USS Barry, USS Russell, and USS John S McCain. The batteries are classified as Type I items with a non-extendable shelf life of 12 months. Strict adherence to hazardous materials packaging, marking, and shipping standards is required, specifically prohibiting the intentional addition of mercury except where functionally necessary. Quality assurance will be managed through zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. All packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with inspection and acceptance occurring at the point of origin.

Battery Manufacturing

POSTED

about 13 hours ago

DEADLINE

BATTERY ASSEMBLY

Solicitation # SPE7L7-26-Q-2417

The Defense Logistics Agency Land and Maritime is soliciting quotations for the procurement of two battery assemblies, identified by NSN 6140-01-664-6369, under solicitation SPE7L7-26-Q-2417. The required delivery timeframe is 60 days after receipt of order, with the place of performance located at FPO 09592. Award will be determined based on the best value to the government, evaluating technical acceptability, price, and past performance regarding offered delivery. This contract carries stringent security and regulatory requirements, including CMMC Level 2 certification and compliance with DFARS 252.204-7012 for safeguarding covered defense information. Technical data is subject to ITAR and EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specific DLA export-control training. Additionally, the items are classified as hazardous materials, requiring the submission of Material Safety Data Sheets and certification via HAZDEC forms in accordance with FED STD 313D. Packaging and marking must adhere to MIL-STD-2073-1E Level B (Pack Code Q) and MIL-STD-129. Inspection and acceptance will occur at the origin, with DCMA inspection limited to kind, count, and condition. Invoicing and payment processing must be conducted electronically through the Wide Area WorkFlow system.

Battery Manufacturing

POSTED

about 13 hours ago

DEADLINE

LIMITER, RADIO FREQU

Solicitation # SPE4A7-26-Q-1069

The Defense Logistics Agency within the Department of Defense has issued solicitation SPE4A7-26-Q-1069 for the procurement of 49 radio frequency limiters. The items are identified by NSN/Part Number 1430-01-224-2273 and are associated with purchase request 7017409812. This federal solicitation was posted on September 11, 2026, with a response deadline of September 15, 2026. Interested parties should direct inquiries to the buyer via the DIBBS portal or the provided contact email.

Other Electronic Component Manufacturing

POSTED

about 13 hours ago

DEADLINE

COVERALLS, ANTI-EXPO

Solicitation # SPE1C1-26-Q-0498

The Defense Logistics Agency under the Department of Defense has issued solicitation SPE1C1-26-Q-0498 for the procurement of one unit of anti-exposure coveralls, identified by NSN/Part Number 8415-01-593-7934. This federal requirement is tracked under purchase request 7018286739. The solicitation was posted on September 11, 2026, with a response deadline of September 18, 2026. Interested parties should direct all inquiries to the buyer via the email address provided in the primary point of contact or through the DIBBS portal using the specific solicitation number.

Cut and Sew Apparel Manufacturing (except Contractors)

POSTED

about 13 hours ago

DEADLINE

GOVERNMENT FIT VERIFIC

Solicitation # SPE7L3-26-Q-1328

The Defense Logistics Agency within the Department of Defense has issued solicitation SPE7L3-26-Q-1328 for Government Fit Verific, identified by part number 0001S00000060. This federal procurement opportunity was posted on September 11, 2026, and requires a response by the deadline of September 28, 2026. The contract is managed under purchase request 7017604125, with specific quantity requirements detailed within the solicitation documents. Interested parties can access further details and submission guidelines through the DIBBS portal.

Testing Laboratories and Services

POSTED

about 13 hours ago

DEADLINE

POWER SUPPLY, UNINTERRU

Solicitation # SPE7L7-26-Q-2372

Solicitation SPE7L7-26-Q-2372 is a fixed-price request for quotations issued by the Defense Logistics Agency Land and Maritime for two uninterruptible power supplies, identified by NSN 6130-01-673-0176 and Motorola Solutions part number DSGXT4-1000RT120. The items are designated as critical application items with a 12-month extendable shelf life. Delivery is required within 60 days after order to the USS MARINETTE (LCS 25). Award will be based on the best value to the government, evaluating price, offered delivery, and past performance. The contract mandates strict adherence to military standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Because the items involve sealed lead acid batteries, the contractor must provide Material Safety Data Sheets per FED-STD-313 and comply with hazardous material shipping regulations under IP025. Quality assurance requires sampling according to MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in the sample lot. Additionally, the contractor must complete a CMMC Level 2 self-assessment and utilize the Wide Area WorkFlow system for all invoicing and receiving reports. Inspection and acceptance will occur at the point of origin.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 13 hours ago

DEADLINE

Supply of Storage Batteries (NSN 6140-01-713-7559)

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 18 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS