This Solicitation opportunity from Department Of Defense was posted on April 10, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
TUBE, METALLIC
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
The contract calls for the supply of metallic steel tubing, specifically 2-inch by 2-inch square tubes with a wall thickness of 0.083 inches, conforming to ASTM Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing standards. The tubes, identified by part numbers MT1010 or MT1020, must be supplied in random lengths between 5 and 24 feet and a total quantity of 400 feet is required. The contract mandates that each length be individually marked, with no bundle tagging allowed, and strictly prohibits the use of Class I ozone-depleting chemicals in any delivered items. Packaging must comply with ASTM D3951, MIL-STD-129, and DLA-specific packaging requirements, emphasizing proper marking and palletization. Delivery terms specify FOB origin with destination inspection and acceptance points, and the shipment must be made by the fastest traceable means, excluding parcel post. The delivery is expected within 20 days of award, allowing a quantity variance of up to 10% over the ordered amount. Sampling and quality assurance are to be performed according to MIL-STD-1916 or ASQ standards with specific inspection levels assigned to critical, major, and minor attributes. The contract is issued by the Department of Defense’s Fluid Handling Division, with performance in Portsmouth, NH, and includes provisions for removal of government identification from non-accepted supplies. The solicitation period runs from April 10 to April 15, 2026.
General Info
Agency
NAICS
Place of Performance
302 NEWMARKET ST BLDG 262, PORTSMOUTH, NH, 03801-7834, USASet-Aside
Documents
(1)AI Contract Breakdown
Uniform Contract FormatWhat is UCF?
Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.
Timeline
Submission Closed
Organization & Contact Information
Full Description
TUBE, METALLIC
Steel, 2 in X 2 in square, 0.083 in wall thickness MT1010 OR MT1020 5 to 24 ft random lengths. ASTM TITLED: "ELECTRIC-RESISTANCE-WELDED CARBON AND ALLOY STEEL MECHANICAL TUBING"
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
FULL AND OPEN COMPETITION APPLY
"IN EXCEPTION TO THE SPECIFICATION: EACH LENGTH
OF MATERIAL SHALL BE MARKED REGARDLESS OF SIZE.
BUNDLE TAGGING IS NOT PERMITTED."
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
IAW BASIC NON GOVT STD ASTM A513/A513M-24
REVISION NR DTD 05/01/2024
PART PIECE NUMBER: MT1010 OR MT1020
SPE7M4-26-T-8924
SECTION B
PR: 7016116331 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016116331 0001 FT 400.000
NSN/MATERIAL:4710007262160
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 10% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:BLK
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
FB6291
FB6291 157 ARW LRS LGRDC
CP 603 430 3470
302 NEWMARKET ST BLDG 262
PORTSMOUTH NH 03801-7834
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
FB6291
FB6291 157 ARW LRS LGRDC
CP 603 430 3470
302 NEWMARKET ST BLDG 262
PORTSMOUTH NH 03801
US
M/F: (TCN) FB629160840016
RDD: 777
PROJ: TP 2
SUPP ADD: YBZ650 SIG: A
SPE7M4-26-T-8924
SECTION B
PR: 7016116331 PRLI: 0001 CONT’D
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A0A DIST: 01 ADV: 2N FC: 6C
Need Ship Date:00/00/0000 Original Required Delivery Date:03/26/2026
SPE7M4-26-T-8924 NSN/Part Number: 4710-00-726-2160 Quantity: 400 FT Purchase Request: 7016116331QTY: 400 Delivery: 20 days ADO
More opportunities from Department Of Defense → FLUID HANDLING DIVISION
Same awarding agency
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 650+ contractors already using CLEATUS