This Solicitation opportunity from Department Of Defense was posted on August 24, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

TUBE, METALLIC

Closed

SPE7L1-26-T-02A1Federal

Submission Closed09/04/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 331420

New

DIBBS

Fabrication of Metal Tube Assemblies (NSN 4710-01-608-7881)This subcontract involves the fabrication of 27 specialized metal tube assemblies, identified by NSN 4710-01-608-7881, for prime contractors supporting the DLA Weapons Support Fluid Handling Division. All work must be performed in accordance with MIL-PRF-16232 standards, with a strict prohibition on the use of additive manufacturing processes. The place of performance for this project is located in Tracy, California. To be eligible, the contractor must hold NADCAP, SAE AS9003, or ISO 9001 certification. Additionally, approval from the US/Canada Joint Certification Program is required to ensure full compliance with ITAR and EAR regulations. The response deadline for this opportunity is November 9, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7M1-27-T-0916

Solicitation SPE7M1-27-T-0916, issued by the DLA Weapons Support Maritime Supply Chain, is a request for quotations for 1,500 feet of electrical wire under NSN 6145015466439. This critical application item must adhere to technical standards SAE AS22759/86E and SAE AS22759E. The procurement is open to full and open competition under NAICS 331420, with a quantity variance allowance of plus or minus 5 percent. Delivery is required within 161 days, with an original required delivery date of April 29, 2027, to DLA Distribution San Diego. While there is a conflict in the documentation, the schedule specifies delivery as FOB Origin, with inspection and acceptance occurring at the destination. The contractor must comply with rigorous packaging and marking standards, including MIL-STD-2073-1E, MIL-STD-129, and MIL-DTL-12000, as well as DLA packaging requirements RP001. Special attention is required for continuous length requirements based on the applicable advice code. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and strict adherence to domestic sourcing regulations, including the Buy American Act and the Berry Amendment. Offerors must also comply with DFARS 252.204-7012 regarding the safeguarding of covered defense information and cyber incident reporting.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7M4-27-T-1902

Solicitation SPE7M4-27-T-1902 is a small business set-aside request for quotations for 27 units of Metal Tube Assemblies (NSN 4710-01-608-7881) for the DLA Weapons Support Fluid Handling Division. The items must be delivered FOB Origin to Tracy, California, within 86 days after order. Technical specifications require the use of MIL-PRF-16232 instead of MIL-DTL-16232, and the government recommends using a NADCAP certified supplier to provide certification in lieu of process approval. The use of additive manufacturing processes is strictly prohibited, and the use of Class I ozone-depleting chemicals is forbidden. The contract mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129. Quality requirements include compliance with SAE AS9003 or ISO 9001, with inspection and acceptance occurring at the point of origin. Due to the nature of the technical data, this procurement is subject to ITAR and EAR export controls, requiring contractors to have an approved US/Canada Joint Certification Program certification. Invoicing must be processed electronically via the Wide Area WorkFlow system. Additionally, offerors must comply with the Buy American Act, the Berry Amendment, and DFARS cybersecurity reporting requirements.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7L1-27-T-2695

Solicitation SPE7L1-27-T-2695 is a small business set-aside procurement issued by the DLA Weapons Support Land Supply Chain for one metal tube assembly, identified by NSN 4710-01-566-4829 and Oshkosh Defense LLC part number 3609037. The requirement specifies a delivery timeframe of five days after receipt of order, with an original required delivery date of October 26, 2026. Shipping is designated as FOB Origin, while inspection and acceptance are to be conducted at the destination. The item is to be delivered to the Distribution Management Office in Albany, Georgia, using the fastest traceable means, specifically excluding parcel post. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, with DLA Master List technical requirements and RP001 packaging requirements taking precedence. Administrative compliance includes using the Wide Area WorkFlow system for electronic invoicing and receiving reports. The contract incorporates several critical regulatory clauses, including the Buy American Act, the Berry Amendment, and DFARS cybersecurity reporting requirements. Quotations must be submitted to the DLA office in Columbus, Ohio, by November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7M0-27-T-0782

Solicitation SPE7M0-27-T-0782 is issued by the Defense Logistics Agency for the procurement of one metallic bent tube, identified by NSN 4710-01-592-9384. The item must be manufactured in accordance with Basic Drawing NR 30554 04-20367 Revision F and TDP Rev A Gen 1. A metal casting process has been identified for production, requiring specific tooling. The required delivery date is October 27, 2026, with a delivery timeframe of five days after award. Shipping is FOB Origin, with the destination and inspection point designated as the Letterkenny Army Depot in Chambersburg, Pennsylvania. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, specifically RA001, RQ011, RP001, and RT001, which take precedence over ASTM D3951 packaging standards. All shipments must be marked and labeled per MIL-STD-129. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses, including the Buy American Act, Berry Amendment, and cybersecurity safeguarding protocols. Full and open competition applies, with a price evaluation preference available for certified HUBZone small business concerns.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Solicitation # SPE7M4-27-T-1933

Solicitation SPE7M4-27-T-1933 is a fixed-price contract issued by the DLA Weapons Support Fluid Handling Division for the procurement of six metallic bent tubes, identified by NSN 4710-01-610-9357. The requirement specifies a delivery period of five days after the order is placed, with an original required delivery date of January 30, 2026. Delivery is FOB Destination, with shipping directed to Camp Lemonnier in Djibouti. Inspection and acceptance will also occur at the destination. The contractor must adhere to strict packaging and marking standards, specifically ASTM D3951 and MIL-STD-129, while ensuring palletization complies with RP001. Technical and quality requirements are governed by the DLA Master List, which takes precedence over other packaging standards. Additionally, the contract prohibits the use of Class I ozone-depleting chemicals and additive manufacturing processes unless specifically authorized. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses regarding cybersecurity, domestic sourcing under the Buy American Act, and the prohibition of covered defense telecommunications equipment.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7M1-27-T-0943

Solicitation SPE7M1-27-T-0943 is a fixed-price request for quotations issued by the DLA Weapons Support Maritime Supply Chain for the procurement of 500 feet of electrical wire, identified as NSN 6145-01-469-3723 and designated as a critical application item. The requirement specifies material from Woven Electronics, LLC or Bell Textron Inc. Delivery is required within 174 days after order, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The procurement falls under NAICS code 331420 and incorporates the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105. Technical requirements mandate that the wire be provided in continuous lengths, with specific restrictions on multiple unit packs depending on the advice code. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, and any hazardous materials must be labeled per the Hazard Communication Standard. Offerors proposing alternate parts must provide a complete data package for evaluation. Administrative compliance requires the use of the Wide Area WorkFlow system for invoicing and adherence to the Buy American Act, the Berry Amendment, and DFARS cybersecurity standards for safeguarding covered defense information.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7M4-27-T-1899

Solicitation SPE7M4-27-T-1899 is a small business set-aside issued by the DLA Weapons Support Fluid Handling Division for the procurement of 30 metal tube assemblies, identified by NSN 4710-01-585-0929 and Cummins Inc. part number 3969397. The contract requires delivery within 20 days of award, with an original required delivery date of October 29, 2026. Shipping is established as FOB Origin, with the final destination being the Egyptian Ministry of Defense in Cairo, Egypt, and a freight forwarder located in Hanover, Maryland. The contractor must adhere to strict packaging and marking standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Technical and quality requirements are governed by DLA master lists RA001 and RP001, and the removal of government identification from non-accepted supplies per RQ011. Key regulatory compliance includes the Buy American and Balance of Payments Program, DFARS cybersecurity reporting requirements, and prohibitions on covered defense telecommunications equipment. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

145115 CABLE, 34.5kV, 750kcm, 133% XLPE, FOR HARBOR CHANNEL

Solicitation # 232573

The Los Angeles Department of Water and Power is soliciting bids for the procurement of 34.5kV, 750kcm, 133% XLPE cable intended for use at the Harbor Channel. This opportunity, identified by solicitation number 232573, is categorized under NAICS code 331420 and will be performed in Los Angeles, California. Interested parties must submit their bids electronically through the Electronic Request Solicit Procure system, as hard copy or mail-in submissions will not be accepted. The posting date is October 27, 2026, with a final response deadline of December 8, 2026. For further inquiries, Daisy Curaming serves as the designated point of contact.

POSTED

DEADLINE

Solicitation # SPE7M1-27-T-1643

Solicitation SPE7M1-27-T-1643, issued by the DLA Weapons Support Maritime Supply Chain, is a small business set-aside for the procurement of 33 units of metal tube assemblies under NSN 4710016065189. The contract requires delivery within 76 days, with a need ship date of January 2, 2024, and a required delivery date of January 31, 2024. Delivery is FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Technical compliance is governed by the DLA Master List of Technical and Quality Requirements and specific reference drawings. Packaging must adhere to ASTM D3951 and RP001, while marking and labeling must comply with MIL-STD-129. The procurement prohibits the use of Class I ozone-depleting chemicals and additive manufacturing processes unless specifically authorized. Administrative requirements include electronic invoicing via Wide Area WorkFlow and adherence to various DFARS and FAR clauses regarding cybersecurity, domestic sourcing, and the prohibition of covered defense telecommunications equipment. Price evaluation preferences are available for certified HUBZone small business concerns.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7M0-27-T-0722

Solicitation SPE7M0-27-T-0722 is a request for quotations issued by the DLA Weapons Support Maritime Supply Chain ESOC Buys for the procurement of one metal tube assembly, identified by NSN 4710-99-863-4800. The requirement specifies a delivery timeframe of five days after receipt of order with shipping terms set as FOB Origin. Inspection and acceptance will occur at the destination, specifically the W0MC STK REC ACCT DEPOT REDRVR in Texarkana, Texas. The procurement is part of the First Destination Transportation program to optimize shipping costs. The contractor must adhere to strict quality and environmental standards, including the prohibition of Class I ozone-depleting chemicals and compliance with the DLA Master List of Technical and Quality Requirements. Packaging must follow ASTM D3951 and MIL-STD-129, with the DLA Master List taking precedence over ASTM standards. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and compliance with various FAR and DFARS clauses regarding cybersecurity, the Buy American Act, and the safeguarding of covered defense information. Offerors must submit quotes via the DIBBS portal and provide necessary small business representations under NAICS code 331420.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Solicitation # SPE7M1-27-Q-0048

Solicitation SPE7M1-27-Q-0048 is a request for quotations from the DLA Weapons Support Maritime Supply Chain for the procurement of 22 metal tube assemblies, identified by NSN 4710-01-113-3432. The items must be manufactured according to Reference Drawing NR 81755 PL16H302-37ISS009 Revision A. This is a small business set-aside under NAICS code 331420, with award based on best value, evaluating price, offered delivery, and past performance. The delivery schedule follows a First Article Testing process totaling 611 days after the date of award, consisting of 90 days for FAT unit delivery, 171 days for government evaluation, and 350 days for final production delivery to DLA Distribution San Diego. Inspection and acceptance occur at the origin, though the FOB point is destination. The contractor must adhere to high-level quality standards such as ISO 9001:2015 or SAE AS9003, and comply with strict packaging and marking requirements including MIL-STD-129 and MIL-STD-130. Significant regulatory requirements include CMMC Level 2 certification and DFARS 252.204-7012 for safeguarding covered defense information. Additionally, the technical data is subject to ITAR or EAR export controls, requiring approved US/Canada Joint Certification Program certification for access. Invoicing must be processed through the Wide Area WorkFlow system. Quotations are due by November 5, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 8 days

AI Contract Overview

This contract is for the procurement of 30 units of metallic tubing, identified by NSN 4710-01-561-5908 and Beta Fueling Systems part number 401FS-H002. The order is issued under solicitation SPE7L1-26-T-02A1 by the Department of Defense Land Supply Chain. Delivery is required within 54 days after receipt of order, with a required delivery date of October 8, 2025, and a need ship date of December 2, 2025. The agreement specifies that shipping is FOB Origin, with inspection and acceptance occurring at the destination. Packaging and preservation must strictly adhere to MIL-STD-2073-1E and MIL-H-775E, while marking must comply with MIL-STD-129. All supplies are to be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract also incorporates DLA master lists for technical and quality requirements and mandates the removal of government identification from any non-accepted supplies.

General Info

DoD procurement of 30 metallic tubing units delivered to Pennsylvania by October 8, 2025.

Agency

Department Of Defense → LAND SUPPLY CHAIN

NAICS

331420 - Copper Rolling, Drawing, Extruding, and Alloying

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

SPE7L1-26-T-02A1 Request for Quotations

17 pages · rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedAug 24

Solicitation

Response DeadlineSep 4

Deadline has passed

Submission Closed

09/04/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → LAND SUPPLY CHAIN

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → LAND SUPPLY CHAIN

Office AddressUSA

Contacts

Rodney McNINCH

contact@example.gov

+1 (555) 000-0000

Full Description

TUBE,METALLIC
TUBE,METALLIC
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
BETA FUELING SYSTEMS, LLC 51744 P/N 401FS-H002
TDP Rev A Gen 1 IAW REFERENCE REVISION NR DTD PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7012540256 0001 EA 30.000
NSN/MATERIAL:4710015615908
DELIVERY (IN DAYS):0054
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
SPE7L1-26-T-02A1
SECTION B
PR: 7012540256 PRLI: 0001 CONT’D
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PRESERVATION, PACKAGING, AND PACKING SHALL BE IN ACCORDANCE WITH MIL-H-775E (HOSE, HOSE ASSEMBLIES; RUBBER, PLASTIC, FABRIC, OR METAL (INCLUDING TUBING) AND ASSOCIATED HARDWARE: PACKAGING OF).
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:12/02/2025 Original Required Delivery Date:10/08/2025
SPE7L1-26-T-02A1 NSN/Part Number: 4710-01-561-5908 Quantity: 30 EA Purchase Request: 7012540256QTY: 30 Delivery: 54 days ADO