Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

TUBE, METALLIC

Active
SPE7M4-26-T-304NFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of seamless aluminum alloy tubing made from 6061 alloy in T-4 condition, with a nominal outer diameter of 0.250 inches and a wall thickness of 0.028 inches, manufactured to meet SAE AMS4081K standards. The material is identified by NSN 4710-01-587-6390 and must be delivered in a total quantity of 176 feet with a 10% variance allowance, delivered FOB origin within 68 days after award, and inspected and accepted at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129 labeling requirements, following DLA’s Packaging Requirements RP001 and the DLA Master List of Technical and Quality Requirements, which take precedence over all other standards. The tubing is to be palletized as per RP001 and shipped to the DLA Distribution facility at New Cumberland, Pennsylvania, with the required ship date set for May 11, 2026, and the original delivery deadline of December 3, 2026. The solicitation is issued under SPE7M4-26-T-304N, with the primary point of contact being Rory O’Reilly at DLA’s Fluid Handling Division, and the NAICS code is 331420 for aluminum manufacturing. All terms, including packaging, inspection, and delivery, are governed by DLA procedural notes and federal procurement guidelines.

General Info

176 feet of 6061-T4 aluminum tubing, 0.250" OD, 0.028" wall, SAE AMS4081K, FOB origin, deliver to New Cumberland by May 11, 2026.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

331420 - Copper Rolling, Drawing, Extruding, and AlloyingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7M4-26-T-304N for Fluid Handling Division

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FLUID HANDLING DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → FLUID HANDLING DIVISION
View Agency Profile
Office AddressUS
Contacts
Rory O'Reilly
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
TUBE,METALLIC
TUBE,METALLIC
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
ALUMINUM ALLOY TUBING, HYDRAULIC
MATERIAL ALUMINUM ALLOY 6061.
HEAT TREATMENT T-4 SOLUTION HEAT
TREATED AND NATURAL AGED.
CONSTRUCTION SEAMLESS.
DIAMETER 0.250 INCHES NOMINAL
WALL THICKNESS .028 INCHES NOMINAL
THIS SPECIFICATION COVERS AN ALUMINUM
ALLOY IN THE FORM OF SEAMLESS, ROUND TUBING.
TDP Rev A Gen 1 IAW BASIC NON GOVT STD SAE AMS4081K REVISION NR K DTD 08/01/2023 PART PIECE NUMBER: SMS4081JDR250PR028
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017441418 0001 FT 176.000
NSN/MATERIAL:4710015876390
DELIVERY (IN DAYS):0068
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 10% MINUS 10%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
SPE7M4-26-T-304N
SECTION B
PR: 7017441418 PRLI: 0001 CONT’D
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:05/11/2026 Original Required Delivery Date:12/03/2026
SPE7M4-26-T-304N NSN/Part Number: 4710-01-587-6390 Quantity: 176 FT Purchase Request: 7017441418QTY: 176 Delivery: 68 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 331420
New
Federal
Acquisition and Processing of Demilitarized 7.62mm Ammunition Scrap (D7MB)
DLA Disposition Services Hq

POSTED

1 day ago

DEADLINE

in 30 days
View Details
NAICS: 331420
New
Federal
Acquisition and Processing of Demilitarized 5.56mm Ammunition Scrap (D5MB)
DLA Disposition Services Hq

POSTED

1 day ago

DEADLINE

in 30 days
View Details
NAICS: 331420
New
Federal
Silver Refining and Reutilization ProcessingThe contract involves processing up to 910,481 troy ounces of silver-bearing battery materials annually, with the goal of refining the recovered silver to a minimum purity of 99.9%. All operations must ensure secure storage of materials throughout the refining process and adhere to strict compliance standards for the disposal of waste byproducts. The work is to be performed at a designated facility in Keyport, Washington, with a response deadline of October 2, 2026, and the opportunity was posted on August 6, 2026. This is a subcontract under the Naval Undersea Warfare Center, part of the Department of Defense, and falls under NAICS code 331420 for metal refining and recycling. The contract does not specify set-aside status or point of contact details, and all submissions must be made through the designated SAM.gov portal.
Naval Undersea Warfare Center

POSTED

1 day ago

DEADLINE

in about 2 months
View Details
NAICS: 331420
New
DIBBS
Aerospace-Grade Electrical Wire Manufacturing & Supply
MARITIME SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 331420
New
DIBBS
TUBE SUPPORT ASSY
Solicitation # SPE4A5-26-T-333F
The contract pertains to the procurement of a Tube Support Assembly, identified by part number 901-080-136-159 and NSN 4710-01-471-8843, with a total quantity of 12 units required under solicitation SPE4A5-26-T-333F. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any other standards including ASTM D3951, and must be complied with in full. Packaging must adhere to MIL-STD-129 and DLA Packaging Requirements for Procurement, with palletization conforming to RP001, while all items must be labeled and marked per RQ017, though Item Unique Identification is not required as specified by the customer under DFARS 252.211-7003. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical attributes must be verified at specified levels. The delivery is FOB origin with a 170-day lead time, inspection and acceptance occurring at the destination, and no quantity variance is permitted. Delivery must be directed to the DLA Distribution San Joaquin receiving warehouse in Tracy, California, with a required ship date of January 31, 2027, and an original delivery deadline of May 5, 2027. Transportation logistics must follow DLAD Proc Notes C19 and C20. The contract references specific quality assurance provisions including RQ001 for tailored higher-level requirements applicable to both manufacturers and non-manufacturers, and RQ011 for the removal of government identification from nonaccepted supplies. Measuring and test equipment used in production must comply with RT001. The unit of issue is each (EA), and pricing details are specified in the contract line item, with all documentation, markings, and packaging strictly aligned with DoD and DLA directives. The primary point of contact for inquiries is Kayla Minor at the Department of Defense’s ASC Supplier Operations OEM Division.
ASC SUPPLIER OPER OEM DIVISION

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 331420
New
DIBBS
TUBE ASSEMBLY, METAL
Solicitation # SPE7M4-26-T-303H
The contract solicits 52 units of a metal tube assembly with the NSN 4710-01-252-2989 under solicitation number SPE7M4-26-T-303H, with a response deadline of August 17, 2026, and a required delivery within 140 days of award. The item falls under NAICS code 331420 and is managed by the Fluid Handling Division of the Department of Defense, with performance located in Anniston, Alabama. The technical data associated with this item is subject to strict export controls under either ITAR or EAR, prohibiting any unauthorized disclosure or transfer to foreign persons, including foreign nationals within the United States or overseas, and compliance with DFARS 252.225-7048 is mandatory. Only contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DLA training on handling export-controlled data and received official approval from DLA, are authorized to access this technical information. Additionally, the contractor must be certified by a CMMC Level 2 accredited third-party assessment organization to meet cybersecurity requirements, and packaging must adhere to DLA’s procurement packaging standards.
FLUID HANDLING DIVISION

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 331420
New
DIBBS
TUBE AND FITTINGS, META
Solicitation # SPE4A5-26-T-332C
The contract covers the procurement of metallic tubes and fittings with part number 70311-22806-116 under solicitation SPE4A5-26-T-332C, supplied to meet strict technical and quality standards governed by the DLA Master List of Technical and Quality Requirements. Compliance with specific DLA directives is mandatory, including RQ018 for contractor retention of supply chain traceability documentation as outlined in DLAD Procurement Note C03 from August 2016, though Item Unique Identification is not required per the service customer’s request. Sampling must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances expected unless otherwise stated, and attributes are to be classified with specified verification levels or AQLs. The item is designated as a critical application component for Sikorsky Aircraft Corporation, requiring adherence to referenced technical data packages and drawings dated May 30, 2020. Delivery is required FOB origin within 170 days, with a final ship date of January 31, 2027, and original delivery due by July 19, 2027. Quantity is fixed at 10 units with no variance allowed. Packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling, with palletization following DLA Packaging Requirements (RP001). All DLA technical requirements supersede ASTM standards. Final delivery is to DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581, with transportation logistics governed by DLAD Procurement Notes C19 and C20. The NSN is 4710-01-521-1433 and the unit of issue is each (EA), with a total contract value based on a unit price of $10.000. All documentation and compliance are governed by the DLA procurement framework, with primary point of contact Sean Moore available for inquiries.
ASC SUPPLIER OPER OEM DIVISION

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 331420
New
DIBBS
WIRE, NONELECTRICAL
Solicitation # SPE8E4-26-T-2023
This contract specifies the procurement of 25 coils of nonelectrical wire made from copper alloy 270, round in shape, with a diameter of 0.064 inches and a total length of 8,468 feet per coil, delivered in whole-foot lengths only. The material must comply with technical specifications referenced in the DLA Master List of Technical and Quality Requirements, including ASTM B134/B134M-15, MIL-STD-129R, SAE AMS-STD-185A, ASTM B900-16, and ASTM B250/B250M-16. Each coil must be clearly labeled with adhesive labels on both sides, and continuous identification markings are mandated on every unit, including the DLA contract delivery order number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot number, and dimensions. Markings must be legible, waterproof, stable, and applied via stenciling or stamping without contaminating the product. Certificates of Quality Compliance, including mill-material certification, are required with every shipment and must be submitted to the DLA Troop Support Contracting Officer. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, with preservation methods conforming to ASTM B900 and marking per MIL-STD-129. Shipment markings must reflect both units of measure when applicable, and palletization must follow RP001 guidelines. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to respond, and any deviation from this requirement must be explicitly declared. The Government waives source inspection requirements for QSLD-compliant suppliers, relieving them from certain quality conformance inspections such as COQC and QAP-EQ003. The contract includes a strict zero variance in quantity, with delivery scheduled 69 days from award, FOB origin, and inspection and acceptance at destination. The material must be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, by the original required delivery date of December 13, 2026. The solicitation is a total small business set-aside under NAICS code 331420, and all technical and quality references are controlled by the revision of the DLA Master List in effect on the solicitation issue date. Failure to meet any marking, certification, packaging, or
DDSP NEW CUMBERLAND FACILITY

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 331420
New
DIBBS
WIRE, ELECTRICAL
Solicitation # SPE7M1-26-T-251F
This contract specifies the procurement of 8,500 feet of electrical wire under NSN 6145014746750 and part number M22759/92-16-6, compliant with SAE AS22759E Revision E dated July 1, 2024, and referenced in solicitation SPE7M1-26-T-251F. The wire must be supplied in continuous length as determined by the advice code, with packaging conforming to ASTM D3951 and labeling per MIL-STD-129, while adhering strictly to DLA’s Master List of Technical and Quality Requirements which override all other standards. The item is designated as a Critical Application Item and is subject to a Qualified Products List or Qualified Manufacturers List requirement, meaning only approved sources may supply it. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitutions require prior approval regardless of specification allowances. Delivery is required FOB origin within 127 days, with a target ship date of December 23, 2026, and an original delivery deadline of January 7, 2027. Quantity tolerance allows for a plus or minus 5 percent variance, with inspection and acceptance occurring at the destination. Packaging must be unitized in 500-foot spools per the Contract Quantity per Unit Pack (QUP), and palletization must follow DLA Packaging Requirements. The consignee is DLA Distribution Warner Robins at Robins AFB, Georgia, with transportation governed by DLAD Proc Notes C19 and C20. The contract is awarded under a federal solicitation with NAICS code 331420, and all units of issue must align with the DoD’s authorized unit and ANSI X12 standards. Any changes to configuration, deviations, or waivers must be processed through formal Engineering Change Proposal or Variance request procedures.
MARITIME SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 331420
New
DIBBS
TUBE ASSEMBLY, METAL
Solicitation # SPE7M4-26-T-304T
The contract is for the procurement of 25 units of a metal tube assembly identified by NSN 4710-01-606-5187 under solicitation SPE7M4-26-T-304T, with a delivery deadline of 231 days after award. The requirement is governed by a comprehensive set of technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with control determined by the solicitation issue or award date depending on acquisition size. The item is defined in part by Army drawings which specify a paint finishing requirement; however, DCSC Drawing 16236 CS-2300-0001 must be used in lieu of those finish specifications, as it includes mandated Chemical Agent Resistant Coating (CARC) and high-temperature coating standards. Ozone-depleting chemicals are strictly prohibited, and any substitute chemicals must be pre-approved unless explicitly authorized by the specification. The contract mandates strict compliance with component qualification standards, requiring all applicable parts to be sourced from QPL or QML-approved manufacturers per procurement note H02. Inspections and acceptance must occur at the origin, and configuration changes require formal Engineering Change Proposal requests for any variance or deviation. Cybersecurity compliance is enforced through CMMC Level 2 certification by an accredited third-party assessor. Technical data associated with the item is subject to export controls under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign nationals within the U.S., and requiring recipients to hold JCP certification, complete mandatory DOD export control training, and receive formal approval from DLA to access the data. Full and open competition applies, with responses due by August 17, 2026, and primary point of contact is Rory O'Reilly of the DLA Fluid Handling Division.
FLUID HANDLING DIVISION

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 331420
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE4A5-26-T-321D
This contract pertains to the procurement of three metal tube assemblies identified by NSN 0001S00000053, issued under solicitation SPE4A5-26-T-321D by the Defense Logistics Agency. Delivery is required within 172 days after delivery order issuance, with performance set at Cherry Point, North Carolina. The supply is subject to a suite of technical and quality requirements referenced from the DLA Master List, including packaging standards, inspection and acceptance at origin, and specific markings for physical identification. Although Item Unique Identification is not mandated, the requirement to remove government identification from non-accepted supplies applies. Export control restrictions are strictly enforced, as the technical data associated with this item is governed by ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location. Access to such data is limited to contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and formal DLA authorization. The contract includes stringent compliance obligations under DFARS clauses and is restricted to contractors meeting all DLA export data handling criteria. The solicitation closed August 12, 2026, with key points of contact listed under the Department of Defense’s ASC Supplier Operations OEM Division.
ASC SUPPLIER OPER OEM DIVISION

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 331420
New
DIBBS
PIPE ASSEMBLY, METAL
Solicitation # SPE4A5-26-T-330N
The contract is for the procurement of a metal pipe assembly with part number 23036351 and NSN 4710-01-329-6442, with a quantity of three units to be delivered FOB origin within 171 days, with no variance allowed in quantity. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and must comply with tailored higher-level contract quality requirements applicable to both manufacturers and non-manufacturers. Configuration changes require an Engineering Change Proposal or variance request, and government identification must be removed from non-accepted supplies. Item Unique Identification is not required per customer instruction, and DFARS 252.211-7003(c)(1)(i) applies. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances unless otherwise specified; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Materials must be manufactured in accordance with the latest drawing revision J. The product must be packaged to MIL-STD-2073-1E with marking compliant to MIL-STD-129, no special marking, and palletized per DLA packaging requirements. Mercury and mercury compounds are strictly prohibited in packaging and preservation. Cybersecurity Maturity Model Certification Level 2 self-assessment is required, and physical identification of the bare item must be marked per RQ017. Delivery is to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract was solicited under SPE4A5-26-T-330N, with a response deadline in August 2026 and a required delivery date of December 5, 2027, though the need ship date is January 31, 2027.
ASC SUPPLIER OPER OEM DIVISION

POSTED

3 days ago

DEADLINE

in 5 days
View Details

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

NAICS: 541690
New
DIBBS
Hazard Communication and Safety Compliance SupportThe contract requires the preparation and submission of hazard warning labels and Material Safety Data Sheets (MSDS) that fully comply with OSHA’s Hazard Communication Standard 29 CFR 1910.1200 and Federal Standard No. 313, with all deliverables due prior to contract award. This effort is part of a subcontract under the Department of Defense’s Fluid Handling Division, focused on ensuring regulatory compliance for chemical safety documentation. The work must be completed and submitted by the response deadline of August 17, 2026, and the performance location is specified as New Cumberland, Pennsylvania, ZIP code 17070-5002. The NAICS code 541690 indicates this is a professional, scientific, and technical services contract, specifically under other scientific and technical consulting services, suggesting the contractor must possess expertise in regulatory safety compliance and documentation standards.
Other Scientific and Technical Consulting Services

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 493190
New
DIBBS
Military-Compliant Packaging and Preservation ServicesThe contract requires comprehensive packaging, preservation, marking, and palletization services for a propeller parts kit, strictly adhering to MIL-STD-2073-1E for military packaging and preservation, MIL-STD-129 for labeling and marking of military shipments, and DLA RP001 for defense logistics agency procurement standards. All work must meet exacting military specifications to ensure the integrity, traceability, and readiness of components during storage and transit. The services are to be performed at the designated place of performance in New Cumberland, Pennsylvania, with zip code 17070-5002, and are classified as a subcontract under NAICS code 493190, which pertains to other warehousing and storage activities. The solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026, and is managed by the Fluid Handling Division within the Department of Defense.
Other Warehousing and Storage

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 336214
New
DIBBS
Marine Propeller Parts Kit SupplyThe contract requires the supply of six units of a marine propeller parts kit identified by NSN 2010-01-701-6865 and part number 8M0150151, encompassing all aspects of manufacturing or sourcing the components, proper packaging, labeling, and final delivery to the Defense Logistics Agency facility in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The work must fully comply with military specifications and standards for defense logistics, with the contractor responsible for ensuring quality, traceability, and timely completion to meet the agency’s operational needs. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, and is classified as a subcontract under the NAICS code 336214 for Ship and Boat Building and Repair. The contracting activity falls under the Fluid Handling Division of the Department of Defense, and all deliverables must be positioned for direct receipt at the designated DLA New Cumberland location. While no set-aside provisions or specific point of contact are detailed, the requirement is open to qualified subcontractors capable of meeting the technical and logistical demands of supplying critical marine propulsion system components to a federal supply chain.
Travel Trailer and Camper Manufacturing

POSTED

2 days ago

DEADLINE

in 10 days
View Details
New
DIBBS
Unable to decompose prime contract due to system unavailability

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 484220
New
DIBBS
Transportation and FOB Destination Delivery
Specialized Freight (except Used Goods) Trucking, Local

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 561910
New
DIBBS
Packaging, Labeling, and Hazard Communication Compliance
Packaging and Labeling Services

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 332999
New
DIBBS
Manufacture and Supply of Porthole Cover (NSN: 2040-17-121-5355)
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 332994
New
DIBBS
Supply of Nonmetallic Hoses (CLIN 0001)The contract requires the manufacture, packaging, labeling, and delivery of 88 units of nonmetallic hoses to the Defense Logistics Agency at New Cumberland, with strict adherence to military packaging and marking standards, as well as origin inspection requirements. All deliverables must meet federal specifications to ensure compatibility and reliability in military applications, with the final products slated for a designated performance location in New Cumberland, Pennsylvania, under the ZIP code 17070-5002. The scope emphasizes compliance with defense supply chain protocols, ensuring traceability and conformity to governmental quality controls throughout production and shipment. This is a subcontract under the NAICS code 332994, which pertains to Other Fabricated Metal Product Manufacturing, and was posted on August 5, 2026, with responses due by August 17, 2026. The contracting office is the Fluid Handling Division of the Department of Defense, and while the solicitation number is not provided, the transaction is accessible via the DIBBS platform for qualified subcontractors to review and respond. The nature of the requirement indicates a focused procurement for specialized nonmetallic hose components, likely for tactical or logistical use within defense systems, and participation necessitates familiarity with military-grade manufacturing and delivery benchmarks.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity and Covered Contractor Information System SafeguardingThis contract requires the implementation of all NIST Special Publication 800-171 security controls to safeguard covered defense information processed, stored, or transmitted on contractor information systems. The contractor must self-attest to compliance with these controls through the Supplier Performance Risk System and maintain ongoing adherence to the specified cybersecurity requirements. Additionally, the contractor is obligated to report any cyber incidents affecting covered defense information in accordance with DFARS clause 252.204-7012, ensuring timely notification and documentation of security breaches or compromised data. The work is scoped as a subcontract under the Department of Defense, specifically managed by the Fluid Handling Division, with performance expected at JBER, Alaska, 99506-2959. The solicitation is open for responses until August 17, 2026, and the NAICS code 541512 indicates this effort relates to computer systems design services, emphasizing the technical nature of the cybersecurity implementation tasks.
Computer Systems Design Services

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance and Safety Data Sheet (SDS) ManagementThe contract requires comprehensive management of hazardous materials used in production and packaging, with a focus on identifying all such materials and ensuring full compliance with OSHA and federal standards for Safety Data Sheets (SDS). This includes preparing, maintaining, and promptly updating SDS documentation to reflect current chemical hazards, formulations, and safety procedures. The contractor must also ensure that all product labeling adheres to regulatory requirements, including accurate hazard communication, pictograms, signal words, and precautionary statements to protect workers and meet legal obligations. Performance is centered at JBER, Alaska, with a strict deadline for response by August 17, 2026. The work falls under NAICS code 541620, indicating it is a professional, scientific, and technical service related to environmental consulting and safety compliance. The subcontract is issued by the Fluid Handling Division under the Department of Defense and is intended to support defense-related operations requiring strict adherence to hazardous material handling protocols. The contractor must be qualified to deliver ongoing compliance services, respond to regulatory changes, and maintain documentation that remains accurate and accessible for audits and inspections.
Environmental Consulting Services

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 561910
New
DIBBS
Military-Grade Packaging and Preservation ServicesThe contract requires the provision of military-grade packaging, preservation, and marking services for tube fitting caps in strict compliance with MIL-STD-2073-1E and DLA RP001 standards. This includes a full sequence of operations such as cleaning, drying, wrapping, and palletizing each component to ensure protection against corrosion, contamination, and physical damage during storage and transit. All processes must meet the rigorous environmental and handling requirements mandated by Department of Defense specifications for long-term readiness and deployment. The work must be performed at the designated place of performance in JBER, Alaska, with the final delivery of packaged units subject to federal contracting protocols. This is a subcontract opportunity under NAICS code 561910 for specialty services in support of defense logistics, issued by the Fluid Handling Division of the Department of Defense. Proposals are due by August 17, 2026, with the solicitation posted on August 5, 2026. Contractors must demonstrate proven experience in military packaging systems, adherence to federal preservation standards, and the ability to maintain quality control throughout the entire workflow. No set-aside designation is specified, and the contract will be awarded based on technical compliance, cost efficiency, and demonstrated capacity to deliver on time to the specified location.
Packaging and Labeling Services

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 332994
New
DIBBS
Precision Manufacturing of Flareless Tube Fitting CapThe contract calls for the precision manufacture of a pressure seal flareless tube fitting cap with the National Stock Number 4730011864740, fully compliant with applicable military specifications. Production must be conducted from raw material procurement through to final inspection and packaged readiness, ensuring all components meet rigorous defense-grade quality and performance standards. The work is scoped as a subcontract under the NAICS code 332994, indicating specialized manufacturing in other fabricated metal product industries, and is tied to a Department of Defense initiative led by the Fluid Handling Division. The contract was posted on August 5, 2026, with a response deadline of August 17, 2026, and requires delivery to a place of performance in Joint Base Elmendorf-Richardson, Alaska, identified by zip code 99506-2959. Although the solicitation number and point of contact are not provided, the contract is accessible through the DIBBS system via the provided UI link. The effort does not involve a set-aside designation, meaning all eligible vendors may compete, and the focus is on technical compliance, end-to-end production capability, and timely fulfillment to support defense fluid handling systems.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

2 days ago

DEADLINE

in 10 days
View Details