This Solicitation opportunity from Department Of Defense was posted on May 28, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
TUBE, SORBENT
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
This contract covers the procurement of sorbent tubes featuring XAD-2 sorbent material with glass fiber filters, measuring between 13 to 8 mm in outer diameter and 75 mm in length, consisting of two sections containing 140/270 mg of sorbent each. The tubes include glass open ends, foam, glass fiber filter, and Teflon ring separators, and come with a protective cover. They are packaged in groups of ten per package, with packaging and packing conforming to commercial standards that ensure product protection during shipment, marked according to Medical Marking Standard No. 1 to facilitate identification and handling. The item, designated under NSN 6550-01-566-1504, has a 12-month non-extendable shelf life and must be delivered within 20 days after order, with no more than one month elapsed between manufacture and delivery. All labels are required to include manufacturing date, expiration or retest date, and contract or lot number. The contract is managed by the Department of Defense’s Medical Supply Chain MD Surg FSF and guides suppliers to meet specific quality, packaging, and marking requirements consistent with DLA technical standards. The point of performance is APO, and inquiries can be directed to the provided Department of Defense contact.
General Info
Agency
NAICS
Place of Performance
KUNSAN AB BLDG 421, APO, AP, 96264-2022, USSet-Aside
Timeline
Submission Closed
Organization & Contact Information
Full Description
TUBE, SORBENT
FEATURES XAD-2,GLASS FIBER FILTER, 13 TO 8 MM OD
X 75 MM LENGTH; 2 SECTION; 140/270 MG SORBENT; GLASS OPEN (GO) ENDS;
FOAM, GLASS FIBER FILTER, AND TEFLON RING (FFGT) SEPARATORS; PROTECTIVE
COVER.
UNIT OF ISSUE: PG (10 EA PER PACKAGE)
..
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
..
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
..
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
..
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
..
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
..
SPE2DS-26-T-104T
SECTION B
RS011: Shelf-life requirement RS001 for a TYPE I (CODE H) item with a shelf life of 12 months (non-extendable) applies to this item.
SHALL HAVE A SHELF LIFE OF 12 MONTHS.
NOT MORE THAN 1 MONTHS SHALL HAVE ELAPSED FROM
DATE OF MANUFACTURE TO DATE OF DELIVERY TO THE
GOVERNMENT.
.
SHELF LIFE MARKINGS SHALL BE IN ACCORDANCE WITH
THE LATEST REVISION OF MMS1C.
. ALL LABELS SHALL INCLUDE:
DATE OF MANUFACTURE, EXPIRATION, OR RETEST DATE
CONTRACT NUMBER/LOT NUMBER.
..
ADEQUATE DATA FOR THE NSN/Part Number: 6550-01-566-1504 Quantity: 1 PG Purchase Request: 7016942366QTY: 1 Delivery: 20 days ADO
