Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

TUBE, SORBENT

Active
SPE2DS-26-T-270DFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The tube is a sorbent sampling device with XAD-2 sorbent material totaling 140/270 mg, housed in a glass tube measuring 75 mm in length with an outer diameter between 13 and 8 mm, divided into two sections. It includes a glass fiber filter, foam, and Teflon ring separators (FFGT), glass open ends, and a protective cover. Each unit is packaged in groups of ten per package, identified as one PG. The item is subject to strict packaging requirements under DLA standards, including commercial-grade sealed unit containers and shipping packaging capable of ensuring safe delivery at the lowest carrier rates, with labeling following Medical Marking Standard No. 1, which supersedes MIL-STD-129. Technical and quality specifications referenced in the DLA Master List govern the item’s compliance, and it is classified as a TYPE I (CODE H) item with a non-extendable shelf life of 12 months, meaning no more than one month may have passed from the date of manufacture to the date of government delivery. All packaging must clearly display the date of manufacture, expiration or retest date, and contract or lot number per the latest revision of MMS1C. The item is identified by NSN 6550-01-566-1504 and falls under solicitation SPE2DS-26-T-270D, with a delivery deadline of 20 days after award. Covered defense information may apply, and government identification must be removed from rejected supplies. The contract is managed by the Department of Defense through the Medical Supply Chain MD Surg FSF, with performance to be conducted at Scott AFB, 62225-5252, and direct point of contact is Mary-Kathryn Donahue.

General Info

Single TUBE, SORBENT solicitation for DLA, deadline August 3, 2026, open to all vendors via DIBBS.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

621410 - Family Planning CentersView NAICS

Place of Performance

310 WEST LOSEY STREET BLDG 1530, SCOTT AFB, IL, 62225-5252, US

Set-Aside

NONE

Documents

(1)

SPE2DS-26-T-270D.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office AddressUS
Contacts
Mary-Kathryn Donahue
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
TUBE,SORBENT
TUBE, SORBENT
FEATURES XAD-2,GLASS FIBER FILTER, 13 TO 8 MM OD
X 75 MM LENGTH; 2 SECTION; 140/270 MG SORBENT; GLASS OPEN (GO) ENDS;
FOAM, GLASS FIBER FILTER, AND TEFLON RING (FFGT) SEPARATORS; PROTECTIVE
COVER.
UNIT OF ISSUE: PG (10 EA PER PACKAGE)
..
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
..
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
..
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
..
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
..
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
..
SPE2DS-26-T-270D
SECTION B
RS011: Shelf-life requirement RS001 for a TYPE I (CODE H) item with a shelf life of 12 months (non-extendable) applies to this item.
SHALL HAVE A SHELF LIFE OF 12 MONTHS.
NOT MORE THAN 1 MONTHS SHALL HAVE ELAPSED FROM
DATE OF MANUFACTURE TO DATE OF DELIVERY TO THE
GOVERNMENT.
.
SHELF LIFE MARKINGS SHALL BE IN ACCORDANCE WITH
THE LATEST REVISION OF MMS1C.
. ALL LABELS SHALL INCLUDE:
DATE OF MANUFACTURE, EXPIRATION, OR RETEST DATE
CONTRACT NUMBER/LOT NUMBER.
..
ADEQUATE DATA FOR THE NSN/Part Number: 6550-01-566-1504 Quantity: 1 PG Purchase Request: 7017609985QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 621410
New
DIBBS
TEST KIT, HUMAN CHORIONThis contract is for the procurement of a qualitative human chorionic gonadotropin (hCG) test kit designed for the early detection of pregnancy in serum or urine, with a sensitivity of 25 mIU/mL. Each unit of issue consists of one package containing 50 individual test cassettes, along with pipettes, a package insert, and a procedure card. The product must comply with stringent medical standards, including packaging and labeling requirements per Medical Marking Standard No. 1, which supersedes MIL-STD-129. All packages must be sealed to protect contents from damage and packed in suitable commercial shipping containers to ensure safe delivery at the lowest cost to the specified delivery point at Fort Bragg, NC. The item has a non-extendable shelf life of 18 months, with no more than three months allowed to have passed from the date of manufacture to the date of government delivery. Labels must clearly indicate the date of manufacture, expiration or retest date, and the contract and lot numbers, in accordance with the latest revision of MMS1C. The product must be stored at room temperature between 15°C and 30°C (59°F to 86°F). Bidders are required to provide the source and part number being offered, and the item is identified by NSN 6550-01-607-9206. The solicitation, issued under contract number SPE2DS-26-T-272L, has a response deadline of August 3, 2026, with delivery required within 20 days after award. Technical and quality requirements are governed by the DLA Master List, and defense information protections apply.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 621410
New
DIBBS
CONTROL, HUMAN SERUMCONTROL, HUMAN SERUM, LEVEL 3 is a liquid, assayed control product based on human serum, designed for comprehensive chemistry testing with over 50 analytes, intended for clinical laboratory use and regulated by the FDA. It must be stored frozen between -20 and -70 degrees Celsius and has a non-extendable shelf life of 24 months, as defined by RS016 for a Type I (Code M) item. The product is supplied by BIO RAD LABORATORIES INC with part number 696 and is identified by NSN 6550-01-579-1532. Packaging must comply with commercial standards as specified in the procurement document, ensuring each unit is sealed and protected from damage, and all exterior shipping containers must ensure safe, cost-effective delivery to the destination. Medical Marking Standard No. 1 (MMS NO. 1) governs all labeling and marking, superseding MIL-STD-129, and copies of the standard must be obtained from DLA Troop Support. The item is shipped as one packaging group, equal to 12 units, with a required delivery within 83 days to APO AE 09227-0000, with delivery terms FOB destination and zero tolerance for quantity variance. The item is subject to applicable DLA packaging, technical, and quality requirements as outlined in the DLA Master List of Technical and Quality Requirements, and all procurement activities must adhere to defense acquisition protocols including referral to the product specialist via EBS for bidder and manufacturer verification.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 621410
New
DIBBS
PHENOL RED PH TEST TABPhenol Red pH Test Tablets are supplied in foil blister packs with 10 tablets per strip, totaling 100 tablets per package, and must dissolve completely in 10 milliliters of water sample to produce a color match against standardized pH readings ranging from 6.8 to 8.2 in 0.2 increments. The tablets must yield accurate results unaffected by the presence of bromine or chlorine in the sample. The item is regulated by the FDA and must comply with all applicable medical acquisition standards, including commercial packaging requirements that ensure protection from damage and secure transport. Each unit must be sealed in appropriate container systems and shipped in exterior packaging that meets commercial standards for safe delivery at the lowest carrier rate, with marking strictly following Medical Marking Standard No. 1, which supersedes MIL-STD-129. The item has a non-extendable shelf life of 48 months and is identified by NSN 6550-01-095-6757 and manufacturer part number LAMOTTE 6915A-J from MIDLAND SCIENTIFIC EAST LLC. Delivery is required within 84 days FOB destination, with zero variance allowed in quantity, and inspection and acceptance occur at the delivery point. The contract reference is SPE2DS-26-T-269R, solicited by the Department of Defense’s Medical Supply Chain under NAICS code 621410, with bids due by August 3, 2026, and primary point of contact Tiffany Parker at DLA.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 621410
New
DIBBS
CHIP, SULFUR DIOXIDEThe chip is a specialized diagnostic device containing ten measurement capillaries pre-filled with a sulfur dioxide reagent detection system, designed for use with the CMS analyzer. It has a measurement range of 0.4 to 10 ppm and is capable of performing ten separate tests per unit. Each unit is sold individually and is identified by NSN 6550-01-530-5898. The item is subject to strict shelf-life requirements: it must have a non-extendable shelf life of 24 months from the date of manufacture, with no more than three months elapsed between manufacture and delivery to the government. All labels must clearly display the date of manufacture, expiration or retest date, and the contract or lot number, in accordance with the latest MMS1C standards. The item is classified as a TYPE I (CODE M) shelf-life item, and applicable packaging, labeling, and quality requirements are governed by DLA Master List technical and quality specifications, including provisions for removal of government identification from rejected supplies. The procurement is tied to solicitation SPE2DS-26-T-267A, issued by the Department of Defense under NAICS code 621410, with a required delivery date within 20 days of award, and primary point of contact is Seth Tootell at Joint Base Andrews.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

4 days ago

DEADLINE

in 2 days
View Details
NAICS: 621410
New
DIBBS
CONTROL SET, BLOOD CThe contract specifies the procurement of a CONTROL SET, BLOOD CHEMISTRY consisting of a liquid general chemistry and lipid control combo kit designed for use with PICCOLO EXPRESS analyzers, delivered in high and low concentration levels, with each vial containing 1 mL of control material. Each packaging unit (PG) contains 12 vials—six high and six low—and the product must be shipped and received frozen at -18°C (0°F) to ensure stability and integrity. The item has a non-extendable shelf life of 12 months, with no more than one month elapsed between the date of manufacture and the delivery date to the government. All labeling must include the date of manufacture, expiration or retest date, and the contract or lot number, following the latest revision of Medical Marking Standard No. 1, which supersedes MIL-STD-129. Packaging must be commercial grade, sealed to prevent damage or breakage, and enclosed in suitable exterior shipping containers that ensure safe, cost-effective delivery to the designated point of performance at Camp Pendleton, CA, with a delivery requirement of five days after order award. The product is identified by NSN/Part Number 6550-01-557-1581, with a quantity of two packaging units ordered under solicitation SPE2DS-26-T-267X, and must comply with all DLA packaging, marking, and quality requirements, including the removal of government identification from non-accepted supplies and applicable defense information controls.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

4 days ago

DEADLINE

in 2 days
View Details
NAICS: 621410
New
DIBBS
CULTURE MEDIUM, GRAM NEThe contract specifies the procurement of Culture Medium, Gram Negative Broth, a liquid microbiological medium packaged in 8 mL units, requiring refrigeration between 2 to 8 degrees Celsius at all times. The item is categorized as a Type I (Code G) with a non-extendable shelf life of nine months and must comply with DLA packaging and medical marking standards, specifically Medical Marking Standard No. 1, which supersedes MIL-STD-129. It is regulated by the FDA, and bidders must clearly identify the source, manufacturer, and part number—specifically Becton, Dickinson and Company P/N 221730 or Cardinal Health 200, LLC P/N 4321730. The unit of issue is a PG, equivalent to 100 units, with a total quantity of one PG required under Purchase Request 7017593382. Delivery must be made within five days FOB destination, with no variance allowed in quantity, and inspection and acceptance occur upon arrival. The NSN is 6550-01-231-7217, and packaging must meet MIL-STD-2073-1E requirements. Covered defense information may apply, and government identification must be removed from non-accepted supplies. The solicitation, issued under SPE2DS-26-T-266H, has a response deadline of July 29, 2026, and is managed by the Department of Defense’s Medical Supply Chain MD Surg FSF, with Kendall Jones as the point of contact.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

4 days ago

DEADLINE

in 2 days
View Details
NAICS: 621410
New
DIBBS
PLASMA CONTROL, NORMALPlasma Control, Normal Level is a quality control solution designed specifically for citrated plasma samples used in prothrombin time and activated partial thromboplastin time coagulation testing. It is intended for use with coagulation analyzers such as the NS 6630 and must be used exclusively with citrated PT and APTT cuvettes. Each package contains 15 vials arranged in four sleeves and requires refrigeration between 2 and 8 degrees Celsius to maintain stability. The product is regulated by the FDA and has a non-extendable shelf life of nine months, classified as a Type I (Code G) item. It is supplied by Werfen USA LLC under part number 000DCJCPT-N and identified by the NSN 6550-01-519-7696, with a unit of issue of one package (1 PG) containing the full set of 15 vials. The contract mandates strict packaging and marking compliance per Medical Marking Standard No. 1, superseding MIL-STD-129, with all units required to be sealed in protective containers suitable for safe transit via common carrier at the lowest possible rate to the designated delivery point. Delivery is FOB destination, with a strict 20-day lead time and zero tolerance for quantity variance. Inspection and acceptance occur at the delivery point. The solicitation, issued under SPE2DS-26-T-266K by the Department of Defense’s Medical Supply Chain, requires bidders to clearly specify the manufacturer and part number and includes an FDA referral obligation for confirmation. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and all packaging must adhere to MIL-STD-2073-1E. The point of contact for inquiries is Seth Tootell at DLA Troop Support.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

4 days ago

DEADLINE

in 2 days
View Details
NAICS: 621410
New
DIBBS
TEST KIT, INFLUENZA +BThe contract is for a diagnostic test kit designed for the qualitative detection of influenza A and B antigens directly from nasal swabs, nasal washes, or nasal aspirates, providing results within 10 minutes. Each kit contains 25 tests and is intended as an aid in the rapid differential diagnosis of acute influenza infections. The product must be stored at room temperature between 59°F and 86°F and has a non-extendable shelf life of 24 months, with no more than three months allowed to have elapsed from the date of manufacture to the date of delivery to the government. All packaging must comply with commercial standards and the Medical Marking Standard No. 1, superseding MIL-STD-129, and must include clear labeling of the date of manufacture, expiration date, and contract or lot number in accordance with MMS1C. The item is designated as a Type I (Code M) medical supply under RS016 requirements and is subject to hazardous communication standards under OSHA’s revised Hazard Communication Standard, requiring suppliers to submit Safety Data Sheets and compliant labels consistent with 29 C.F.R. 1910.1200 prior to contract award. Employee training on the new SDS and labeling requirements is mandatory. The unit of issue is one kit containing 25 tests, with a delivery requirement of 20 days after order and a federal NSN of 6550-01-531-2897 under solicitation SPE2DS-26-T-266B, issued by the Department of Defense’s Medical Supply Chain.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

4 days ago

DEADLINE

in 3 days
View Details
NAICS: 621410
New
SLED
Planned ParenthoodPlanned Parenthood is anticipated to provide cervical cancer screening and diagnostic services to uninsured and underinsured individuals in the District of Columbia. The service is intended to increase access to critical preventive healthcare for populations who face barriers to care, ensuring early detection and timely intervention for cervical cancer. The contract is forecasted by the District of Columbia Department of Health and is focused on expanding public health outcomes through community-based clinical services. While specific details such as funding amount, duration, or performance metrics are not yet published, the initiative underscores a commitment to equitable healthcare delivery and aligns with broader public health goals to reduce disparities in cancer outcomes. The opportunity is posted on the District’s contracting portal with a future forecast date of July 23, 2026, and interested vendors should monitor updates for formal solicitation release.
Health (DOH)

POSTED

4 days ago

DEADLINE

N/A
View Details
NAICS: 621410
New
DIBBS
TEST STRIPS, SANITIZINGThe contract is for test strips designed for sanitizing testing, specifically calibrated to measure the concentration of quaternary ammonium compound (QAC) sanitizers used in dishwashing rinse cycles, with a testing range of 50 to 400 ppm. These are impregnated paper strips intended to verify sanitizer strength, ensuring compliance with hygiene standards in institutional or medical settings. The items are identified by NSN 6550-01-452-1775, with a procurement quantity of two units under purchase request 7017578608. Delivery is required within 20 days after order placement. The solicitation, numbered SPE2DS-26-T-261Y, was posted on July 22, 2026, with a response deadline of July 28, 2026, and falls under NAICS code 621410 for medical laboratories. It is a federal solicitation managed by the Medical Supply Chain MD Surg FSF under the Department of Defense. The place of performance is March Air Reserve Base, California, with a zip code of 92518-1831. Primary point of contact is Anh Lam, reachable via phone at 215-737-7477 or email at anh.lam@dla.mil. The contract is issued through the DIBBS system, and no set-aside provisions are applicable.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

5 days ago

DEADLINE

in 1 day
View Details
NAICS: 621410
New
DIBBS
COUNTING KIT, BLOOD CELThe contract calls for the procurement of a Blood Cell Counting Kit specifically designed for erythrocyte (RBC) counts, containing 100 single-use Ery-Tic tests, 100 end-to-end 5-microliter capillaries, and 100 chamber-filling capillaries, all packaged as one unit of issue (PG) equaling 100 individual kits. The kits must have a non-extendable shelf life of 12 months, with no more than two months elapsed from the date of manufacture to the date of government delivery. Each unit must be sealed in a protective container, and all packaging must comply with DLA Packaging Requirements and Medical Marking Standard No. 1, superseding MIL-STD-129; lot and manufacture dates must be clearly marked with the prefix “MFD.” The item is regulated by the FDA, and bidders are required to specify their company name, contact information, manufacturer, part number, and country of origin. Delivery is FOB destination within 20 days to the specified address in Hampton, Virginia, and shipment must be traceable—parcel post is prohibited. The material is not classified as hazardous under FED-STD-313, so commercial packaging per ASTM D3951 is acceptable, but DLA’s Master List of Technical and Quality Requirements takes precedence over all other standards. The contract specifies a fixed quantity of one PG with zero variance allowance, and inspection and acceptance occur at the delivery point.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

5 days ago

DEADLINE

in 2 days
View Details
NAICS: 621410
New
DIBBS
CHLORINE TEST TABLETSThe contract specifies the procurement of chlorine test tablets containing diethyl-p-phenylenediamine (DPD) for measuring chlorine concentration in fluids, supplied in packages of 100 tablets. The item is classified as a Type I (Code Q) with a non-extendable shelf life of 36 months, and must comply with DLA’s technical and quality requirements as defined in the Master List of Technical and Quality Requirements. It is regulated by the FDA requiring a referral in EBS for confirmation, including bidder and manufacturer details. Packaging must adhere to commercial standards under Medical Marking Specification No. 1 (MMS No. 1), superseding MIL-STD-129, and each unit must be sealed and protected against damage. Exterior shipping containers must ensure safe delivery at the lowest carrier rate to the designated destination, marked according to MMS No. 1. The item is identified by NSN 6550-01-425-7957 and manufacturer part number 1224K35, with a single unit of issue of one package. Delivery is required FOB destination within 20 days with zero variance allowed in quantity. Inspection and acceptance occur at the delivery point. The solicitation was issued under SPE2DS-26-T-261V with a response deadline of July 28, 2026, and the contracting office is part of the Department of Defense’s Medical Supply Chain under the Hampton, Virginia delivery location.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

5 days ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

NAICS: 339113
New
DIBBS
ADMINISTRATION SET, INTThe contract specifies the procurement of a selectable drip intravenous administration set, identified by NSN 6515-01-652-5203, with a unit of issue being a package of 48 units. Each set includes three luer-activated Y-sites, an 82-inch extension set featuring two additional luer-activated Y-sites, an extra pinch clamp, and a spin lock, all supplied sterile. Packaging must comply with commercial standards as outlined in the procurement document, requiring each unit to be sealed in a protective container and shipped in suitable exterior packaging capable of surviving transport at the lowest cost to the delivery point in Waco, Texas, 76707-1019. All items must be marked in accordance with Medical Marking Standard No. 1, which replaces MIL-STD-129, and copies of the standard are available through DLA Troop Support. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Government identification must be removed from non-accepted supplies. The solicitation number is SPE2DS-26-T-273C, with a response deadline of August 3, 2026, and delivery required within 20 days after award. The contracting office is under the Department of Defense’s Medical Supply Chain, with Allen Costello listed as the primary point of contact.
Surgical Appliance and Supplies Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
DIBBS
PAD, NONADHERENTThe contract specifies the procurement of sterile, nonadherent PADs measuring 3 inches by 8 inches, supplied in packages of 50 units each. Each pad is individually packaged with perforated plastic film covering on both sides, made from white cotton nonwoven material, and designed to remain sterile until use. The product must have a shelf life of 36 months, with no more than five months elapsed between the manufacturer’s production date and delivery to the government. Packaging must comply with commercial standards as outlined in the procurement document, requiring each unit to be sealed in a protective container and shipped in suitable exterior containers that ensure safe delivery by common carrier at the lowest cost. All items must be marked in accordance with Medical Marking Standard No. 1, replacing all prior references to MIL-STD-129. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition type. The NSN is 6510-00-986-2942, with a quantity of four packages required and delivery due within 20 days of award. The solicitation is issued under SPE2DS-26-T-271X by the Department of Defense’s Medical Supply Chain, with Marc Canalichio as the primary point of contact.
Surgical Appliance and Supplies Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 000000
New
DIBBS
BRACE, WRIST AND FOREARThis contract specifies the procurement of five units of a wrist and forearm brace with NSN 6515-01-738-5237 and manufacturer part number 79-87305, supplied by DJO LLC and Cardinal Health 200, LLC. The item is classified as a Class I medical device under FDA Regulation 890.3475, requiring compliance with registration, labeling, and GMP standards even if a 510(k) is not mandatory. The contract mandates strict adherence to DLA packaging standards, including MIL-STD-2073-1E for packing methods and Commercial Packaging as defined in medical procurement guidelines, with all units sealed in protective containers suitable for carrier transport. Medical Marking Standard No. 1 supersedes MIL-STD-129, and all packaging must be labeled accordingly to ensure proper identification and handling. Delivery is required FOB destination within five days of award, with zero variance allowed in quantity, and inspection and acceptance occur at the destination. The designated delivery and shipping address is Joint Base Pearl Harbor-Hickam, Hawaii, with specific tracking identifiers and transportation references provided. The solicitation number is SPE2DS-26-T-272P, with a response deadline of August 3, 2026, and the unit price is $5.00 per unit, totaling $25.00. Technical and quality requirements referenced via R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Covered Defense Information provisions may apply, and all bidders must be referred to the FDA product specialist via EBS with complete manufacturer and item details. Packaging must comply with DLA’s RP001 requirements and palletization standards, and all materials must be marked per Medical Marking Standard No. 1, obtainable through DLA Troop Support. The point of contact for inquiries is James Burke, and the procurement is managed under the Department of Defense’s Medical Supply Chain division.

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339112
New
DIBBS
NEEDLE, HYPODERMICThe contract specifies the procurement of a 21-gauge hypodermic needle, unit of issue being a box of twelve, with a mandatory shelf life of 60 months from manufacture, no more than nine months of which may have elapsed by the time of delivery to the government. Packaging must comply with commercial standards as outlined in the procurement document, with each needle sealed in a protective unit container and grouped within robust shipping containers suitable for safe transport via common carrier at the lowest cost to the designated delivery point. All items must be marked in accordance with Medical Marking Standard No. 1, superseding MIL-STD-129, and must include the NSN, manufacturer and CAGE code, date of manufacture, expiration or retest date, contract or lot number, and the prefix “MFD” before the lot number and manufacture date. The product is regulated by the FDA, requiring a referral through EBS for confirmation prior to award. Packaging must meet ASTM D3951 but is subject to precedence by all DLA Master List of Technical and Quality Requirements, with palletization following RP001. The delivery is FOB destination within five days, with zero variance allowed in quantity, and inspection and acceptance occur at the destination. Shipments must not use parcel post and must be sent via the fastest traceable method to the specified government addresses, with detailed routing through the NMCS system and reference to the contract SPE2DS-26-T-270N and NSN 6515-01-660-3150. The required delivery date is July 28, 2026, and the contract is tied to specific manufacturers including Becton, Dickinson and Company, Medline Industries, LP, McKesson, and Tribalco LLC, each with their respective part numbers.
Surgical and Medical Instrument Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 322211
New
DIBBS
DRESSING, OCCLUSIVE,This contract specifies the procurement of occlusive chest wound seal dressings, designed as adhesive, translucent, latex-free products with hydrophilic gel adhesion and adhesive on one side, lacking a vent and packaged in a resealable protective container for backup sealing. Each unit of issue contains two dressings per package, and the item must maintain a non-extendable shelf life of 36 months, with no more than five months elapsed from the manufacturer’s date to the delivery date to the government. The item is subject to rigorous technical and quality requirements identified under R and I numbers in the DLA Master List, and packaging must comply with DLA standards. Government identification must be removed from non-accepted supplies, and the NSN 6510-01-581-0553 is being procured in a quantity of 10 packages under purchase request 7017617196, with delivery required within five days of award. The solicitation, issued under SPE2DS-26-T-272Z on July 26, 2026, with a response deadline of August 3, 2026, is managed by the Department of Defense’s Medical Supply Chain and will be performed at Fort Bragg, North Carolina, 28310. Primary point of contact is Tiffany Parker, reachable via email and phone provided.
Corrugated and Solid Fiber Box Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339112
New
DIBBS
NEEDLE, DISPENSING, FThe contract specifies the procurement of two dispensing needles for fiber optic applications, designated by NSN 6515-01-532-2085, intended for medical use and tied to Purchase Request 7017611639. Each unit must be packaged commercially as outlined in the procurement documentation, with every complete unit enclosed in a sealed container capable of preventing damage or breakage. The units must be shipped in suitable commercial exterior containers that ensure safe delivery by common carriers at the lowest possible rate to the designated delivery point. All items must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and bidders must provide the source and part number being supplied. Technical and quality requirements referenced under RA001 are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date depending on the acquisition type. Packaging must adhere to DLA’s procurement standards, and non-accepted supplies must have all government identification removed. The solicitation, issued under SPE2DS-26-T-272D, has a response deadline of August 3, 2026, with a required delivery timeline of 20 days after award, and is managed by the Department of Defense’s Medical Supply Chain under the primary point of contact Olusola Emmanuel.
Surgical and Medical Instrument Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339114
New
DIBBS
BRUSH, BRISTLE, DENTAL HThe contract specifies the procurement of a dental handpiece bristle brush designed for polishing around the necks of teeth and embrasures between teeth of plastic dentures. The brush features a stiff bristle configuration with a disk diameter ranging from 0.719 to 0.781 inches and is mandrel-mounted, with each package containing twelve units. The item is identified by NSN 6520-01-056-7376 and is to be delivered in a single package quantity within twenty days of award. The solicitation number is SPE2DS-26-T-272J, with a response deadline of August 3, 2026, and a posted date of July 26, 2026. The procurement falls under NAICS code 339114 and is managed by the Department of Defense through the Medical Supply Chain MD Surg FSF, with performance occurring at Camp Lejeune, North Carolina. Bidders must clearly indicate the source and part number being offered. The contract incorporates technical and quality requirements from the DLA Master List, applies DLA packaging standards, and mandates the removal of government identification from non-accepted supplies. Covered defense information may apply, and all submissions must comply with federal acquisition protocols.
Dental Equipment and Supplies Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339112
New
DIBBS
SYRINGE AND NEEDLE, HYPThe contract specifies the procurement of sterile, disposable, plastic hypodermic syringes with 23-gauge, 1-inch needles, each with a 3-milliliter capacity, packaged in quantities of 100 units per package. The item is identified by NSN 6515-00-149-1206, with a total order quantity of two packages. A shelf life of 60 months, non-extendable, applies under requirement RS001 for TYPE I items, and packaging must comply with DLA packaging standards. All technical and quality specifications referenced by R or I codes are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The item is subject to requirements for covered defense information and mandates the removal of government identification from non-accepted supplies. Bidders must clearly state the source and part number being offered. The solicitation, issued under SPE2DS-26-T-270C, was posted on July 26, 2026, with responses due by August 3, 2026, and delivery is required within five days of award to Groton, Connecticut, with the primary point of contact being Dorothy Marquis of the Department of Defense’s Medical Supply Chain.
Surgical and Medical Instrument Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 423450
New
DIBBS
APRON, X-RAY PROTECTIVEThe contract is for two X-ray protective aprons, each designed as a sleeveless, form-fitting coat with tie tapes for secure closure. The aprons feature a lightweight back weighing 10 pounds and measure 38 inches in length and 24 inches in width. They must be constructed from lead-impregnated plastic or a combination of lead and tin impregnated plastic, providing radiation protection equivalent to a minimum of 0.5mm of pure lead. The unit of issue is each, and delivery is required within 10 days of award. The aprons must comply with DLA packaging requirements and all referenced technical and quality standards listed in the DLA Master List of Technical and Quality Requirements. The National Stock Number is 6532-00-935-9765, and the purchase request number is 7017612566. The solicitation, issued under contract SPE2DS-26-T-272F, is managed by the Department of Defense’s Medical Supply Chain MD Surg FSF, with performance required at Fort Bliss, Texas. The primary point of contact is Tiffany Parker, reachable via phone and email provided. The response deadline for bids is August 3, 2026, and the solicitation was posted on July 26, 2026. Any non-accepted supplies must have government identification removed prior to return.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334511
New
DIBBS
GLOVES, DISPOSABLEThe contract specifies the procurement of disposable nitrile rubber gloves in a Bear Claw Glove Kit configuration, sized large with a sand color, measuring 11.8 inches in length, featuring a beaded cuff, 8 mil thick fingertips, 6 mil thick palm, and 4.7 mil thick cuff. The gloves are designed for single-use only and are individually wrapped in pairs. Each unit of issue is a package containing 25 pairs, with a total quantity of five packages required. The product is identified by NSN 8415-01-600-0262 and must comply with DLA packaging requirements and technical quality standards outlined in the DLA Master List of Technical and Quality Requirements. The item is to be delivered within 20 days of award to Fort Campbell, with the procurement governed under solicitation SPE2DS-26-T-271P, issued on July 26, 2026, and requiring responses by August 3, 2026. The acquiring agency is the Department of Defense through the Medical Supply Chain MD Surg FSF, and all non-accepted supplies must have government identification removed prior to return. The primary point of contact for inquiries is Tiffany Parker, reachable via email and phone.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339112
New
DIBBS
SYRINGE AND NEEDLE, HYPThe contract specifies the procurement of sterile, disposable, safety-mode hypodermic syringes with integrated automatic needle retraction, each with a nominal length of one inch and a capacity of 0.5 cubic centimeters up to 3 cubic centimeters. The syringes must be non-toxic, non-pyrogenic, feature a solid dark color, and include a plunger designed not to depress prematurely. Each unit must be individually sealed in a protective container and packed in commercial shipping containers suitable for safe transport via common carrier to the delivery point, with packaging compliant with Medical Marking Standard No. 1, which replaces MIL-STD-129. The unit of issue is a package of 100 syringes, with a mandatory shelf life of 60 months and a restriction that no more than nine months may have passed between the manufacturer’s date and the delivery date to the government. Labeling must conform to the latest MMS1A standard, clearly indicating the manufacturer date, expiration or retest date, contract number, and lot number. The item is regulated by the FDA, and bidders must provide source and part number confirmation. The syringe is identified by NSN 6515-01-452-0465, with a total quantity of 10 packages requested under solicitation SPE2DS-26-T-272T, requiring delivery within 20 days of award to Luke AFB, Arizona. Technical and quality compliance is governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. All packaging and marking must meet DLA’s stringent standards for military medical procurement.
Surgical and Medical Instrument Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339112
New
DIBBS
CATHETERIZATION KIT, URThe contract is for the procurement of a urethral catheterization kit, specifically the Precision 400 Urine Meter with a 16 French, 5 cc Foley catheter made of 100% silicone and a 100% latex-free drainage bag, all packaged with a splash guard. Each unit of issue contains ten kits, and the item is identified by NSN 6515-01-478-4788 with a single purchase request for one package. The specifications strictly adhere to technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, and packaging must comply with DLA procurement standards. The supply must be free of government identification if not accepted, and the bidder must clearly state the source and part number being offered. The solicitation, issued under SPE2DS-26-T-269G by the Department of Defense’s Medical Supply Chain MD Surg FSF, has a response deadline of August 3, 2026, with delivery required within 84 days after award to APO zip 96260-5479. The NAICS code 339112 applies to medical device manufacturing, and while the contract is classified as a federal procurement with potential coverage of defense information, no set-aside type is specified. All bids must be submitted through the DIBBS platform, with Brooke Webb as the primary point of contact for inquiries.
Surgical and Medical Instrument Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details