Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

TUBE, TRACHEAL

Awarded

SPE2DS-26-T-014CFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of a 6mm uncuffed Murphy tracheal tube, manufactured by Teleflex LLC with part number 5-10412, supplied as a sterile, disposable unit in PVC plastic with an open tip, packaged in units of 10 per package identified as a "PG." All items must comply with DLA’s packaging and marking requirements, specifically Medical Marking Standard No. 1, which replaces MIL-STD-129, and must be packed in sealed unit containers protected against damage, with exterior shipping containers suitable for safe delivery via common carrier at the lowest cost to the destination. The product is regulated by the FDA, requiring a referral through EBS to confirm compliance prior to award. The NSN is 6515-01-417-6642, with a requirement for one package to be delivered within five days FOB destination, no variance allowed in quantity, and inspection and acceptance occurring at the delivery point. The solicitation is issued under contract number SPE2DS-26-T-014C with a response deadline of May 4, 2026, and is governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions based on the solicitation or award date. All documentation, including manufacturer part numbers and commercial packaging, must be clearly specified, and covered defense information provisions may apply.

General Info

6mm uncuffed Murphy tracheal tube, sterile, PVC, 10 per PG, NSN 6515-01-417-6642, FDA-regulated, FOB destination, one package by May 4, 2026.

Agency

Department Of Defense → Defense Logistics Agency

Contract Value

$12.31

NAICS

339113 - Surgical Appliance and Supplies Manufacturing

Place of Performance

NC, USA

Set-Aside

NONE

Awardee

Award Issued Date

06/17/2026, 12:00:00 AM UTC

Documents

2

Order for Supplies or Services SPE2DS-26-V-6840

award

High

RFQ SPE2DS-26-T-014C

22 pages · rfq

High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded

PostedApr 27

Solicitation

AwardedJun 17

Contract was awarded

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressUSA

Contacts

Michael Small

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

DLA award SPE2DS26V6840 posted on DIBBS. Awardee: TELEFLEX LLC (CAGE 8BXN8) Total Contract Price: $12.31 Award Date: 06-17-2026 Solicitation: SPE2DS-26-T-014C Line items: - TUBE, TRACHEAL (NSN/Part 6515014176642, PR 7016505425)

Similar Contracts

Same NAICS industry code

Precision Optical Component FabricationThis subcontract for the U.S. Air Force involves the fabrication of high-precision optical elements intended for laser system projects. The scope of work requires specialized technical capabilities, including diamond turning, polishing, and coating of optical surfaces to achieve micron-level tolerances. To ensure the quality of the finished components, which must meet specific refractive and reflective indices, the contractor must utilize optical metrology equipment and operate within ISO 5 or better cleanroom environments. The opportunity is designated as a total small business set-aside under NAICS code 339113, specifically targeting firms with fewer than 500 employees in accordance with SBIR/STTR mandates. Interested parties must submit their responses by November 25, 2026.

POSTED

about 5 hours ago

DEADLINE

Bioruptor® Compatible Microtube SupplyThis subcontract involves the supply of specialized, brand-compatible microtubes for prime contractors supporting NIH/NHLBI laboratory projects. The requirement specifies the provision of 0.65 mL microtubes and 1.5 mL microtubes with caps, delivered in packs of 50. These materials must adhere to strict dimensional specifications to ensure compatibility with indirect sonication in the Bioruptor Pico, preventing tube failure and meeting the rigorous standards required for epigenomic studies and ChIP-seq. Managed by the National Institutes of Health under the Department of Health and Human Services, the contract falls under NAICS code 339113. All supplies are to be delivered to Bethesda, Maryland. The solicitation was posted on October 28, 2026, with a response deadline of November 10, 2026.

National Institutes Of Health Olao

POSTED

about 5 hours ago

DEADLINE

Specialized Optical Coating and Filter SupplyThis subcontract opportunity with the U.S. Air Force involves the supply of custom optical filters and coatings designed for high-enthalpy ground testing projects. The selected provider will be responsible for thin-film deposition and the spectral characterization of filters tailored for specific hyperspectral bands operating at low temperatures. Deliverables include custom optical filters or coated lenses, and the contractor must maintain ISO 9001 quality management standards to ensure technical precision. The contract is designated as a total small business set-aside under the SBIR/STTR mandate, limiting eligibility to firms with fewer than 500 employees. Interested parties must submit their responses by November 25, 2026. This procurement falls under NAICS code 339113 and supports prime contractors in executing critical Department of Defense aerospace testing initiatives.

POSTED

about 5 hours ago

DEADLINE

42--SPECTACLES,INDUSTRIAL

Solicitation # SPE8E627T0451

DLA Troop Support

POSTED

about 5 hours ago

DEADLINE

Manufacture of Drainage Pipe Traps (NSN 4730-01-191-4109)This subcontract involves the fabrication and assembly of drainage pipe traps for the DLA Weapons Support Fluid Handling Division under NSN 4730-01-191-4109. The selected provider must adhere to RA001 quality requirements and ensure that no mercury or Class I ozone-depleting chemicals are utilized during production. All finished items must be packaged and marked in accordance with MIL-STD-2073-1E, MIL-STD-129, and DLA RP001 standards, with final delivery to DLA Distribution DDSP in New Cumberland, Pennsylvania. Strict regulatory and security compliance is required for this project, including CMMC Level 2, ITAR, and EAR certifications. The contract falls under NAICS code 339113 and is managed by the Department of Defense. Interested parties must submit their responses by November 9, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 24 hours ago

DEADLINE

Polypropylene Laboratory Beaker SupplierThis subcontract involves the supply of 250 ML polypropylene laboratory beakers to prime contractors supporting Department of Defense Medical Supply Chain FSH projects. The required beakers must be graduated in both milliliters and ounces, autoclavable up to 250 degrees Fahrenheit, and resistant to organic solvents and strong acids. All deliverables must comply with NSN 6640-01-020-2755, the DLA Master List of Technical and Quality Requirements, and Medical Marking Standard No. 1. The opportunity is categorized under NAICS code 339113 and is managed by the Department of Defense. Performance for this contract is located at FPO 96672. Interested parties should note the posted date of October 27, 2026, with a response deadline set for November 3, 2026.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 24 hours ago

DEADLINE

Particulate Filter Manufacturer/SupplierThis subcontract, issued by Construction & Equipment MRO SVC I for the Department of Defense, requires the manufacture or sourcing of 64 particulate filters meeting NSN 4240123617499 specifications. The supplier is responsible for ensuring all items are packaged and marked according to MIL-STD-2073-1E and MIL-STD-129, with palletization adhering to DLA RP001 standards. Performance for this contract will take place in Tracy, California. To be eligible, the contractor must maintain strict cybersecurity compliance in accordance with NIST SP 800-171 and DFARS 252.204-7012. The solicitation was posted on October 27, 2026, with a response deadline of November 9, 2026. The project falls under NAICS code 339113 and focuses on the delivery of fully packaged and marked filters to support prime contractors on DLA supply contracts.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 24 hours ago

DEADLINE

Supply of Nonpneumatic Ratcheting Tourniquets (TX3)This subcontract involves the supply of TX3 Nonpneumatic Ratcheting Tourniquets in Olive Drab Green to support prime contractors on Department of Defense projects managed by the DLA Troop Support Medical Supply Chain. All provided items must strictly adhere to NSN 6515-01-667-6208 and the DLA Master List of Technical and Quality Requirements. Additionally, the contractor is required to comply with the Buy American Act and the Berry Amendment, with deliveries made FOB Destination to Fort Polk. Packaging and labeling must meet specific industry and agency standards, including ASTM D3951, RP001 DLA Packaging Requirements, and Medical Marking Standard No. 1. The opportunity is categorized under NAICS code 339113, with a response deadline set for November 2, 2026.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 24 hours ago

DEADLINE

Patient Pelvic Sling ManufacturingThis subcontract involves the full assembly and manufacturing of single-use patient pelvic slings for prime contractors supporting Department of Defense medical supply contracts. The scope of work includes fabricating slings from seven inch wide cotton and foam webbing, integrating radiolucent buckles within Velcro loops for automatic tension limiting, and printing the necessary application manuals. The final deliverable consists of eight completed, rolled-up pelvic slings accompanied by their respective manuals. To qualify for this project, the manufacturer must maintain FDA Regulation 890.3490 Class I registration and ensure full compliance with the Berry Amendment. The work is associated with the Medical Supply Chain MD Surg FSF and is designated for performance at Fort Polk. Interested parties should note the response deadline of November 2, 2026.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 24 hours ago

DEADLINE

Supply of Socket Head Cap Screws (NSN 5305-01-719-0528)This subcontract involves the procurement and delivery of 24 socket head cap screws, identified by NSN 5305017190528, to support prime contractors fulfilling DLA supply contracts. The project is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division and is categorized under NAICS code 339113. Performance of the contract will take place in Groton, Connecticut. The contractor is required to strictly adhere to RP001 DLA Packaging Requirements and RQ017 Physical Identification/Bare Item Marking standards for all units. Additionally, the agreement mandates compliance with the FAR 52.219-33 Nonmanufacturer Rule. The solicitation was posted on October 27, 2026, with a response deadline of November 4, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 24 hours ago

DEADLINE

Supply of Oronasal Resuscitation MasksThis subcontract involves the supply of universal size oronasal resuscitation masks for prime contractors working on Department of Defense projects. The required masks must feature a head strap coupling and a pre-inflate cushion, with options for both disposable and reusable versions intended for manikin training. Each unit must be delivered in an individual pocket-size case that includes illustrated instructions printed on the back. All supplied equipment must strictly adhere to NSN 6515-01-276-1417 specifications. The contract is managed under NAICS code 339113 through the Medical Supply Chain MD Surg FSF agency, with the place of performance located at FPO 09595-2200. The response deadline for this opportunity is November 2, 2026.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 24 hours ago

DEADLINE

Sterile 4-Ply Gauze and Elastic Wrap SupplyThis subcontract involves the supply of medical-grade, latex-free textiles to prime contractors supporting DLA Troop Support medical supply contracts. The scope of work focuses on the manufacture of sterile 4-ply gauze in 3-meter lengths and medical-grade elastic wrap, utilizing a combination of synthetic fibers and medical-grade cotton. All produced materials must strictly adhere to medical grade purity standards and comply with the Buy American Act. Managed under the Department of Defense through the Medical Supply Chain MD Surg FSF, the contract allows for delivery in either bulk rolls or pre-cut lengths. Performance for this requirement is centered at Fort Polk, Louisiana. The solicitation was posted on October 27, 2026, with a response deadline of November 2, 2026, falling under NAICS code 339113.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 24 hours ago

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Cafeteria & Food Truck Services - DLA Susquehanna

Solicitation # NAFUA1-26-R-0005

The Defense Logistics Agency NAF Contracting Office, acting for the Susquehanna Post Restaurant Fund, is soliciting proposals under RFP NAFUA1-26-R-0005 for a single concessionaire to provide full-scope cafeteria, catering, and optional food truck services at the Defense Distribution Center Susquehanna in New Cumberland, Pennsylvania. This revenue-generating agreement requires the contractor to operate Darrs Cafe in Building 430 and the Inflight Cafe in Building 2001, supporting approximately 4,500 personnel. The contract structure includes a two-year base period starting December 1, 2026, with four subsequent two-year option periods for a total potential duration of ten years. Notably, the government will not pay for these services; instead, the concessionaire pays the government a monthly fee based on the higher of a Minimum Monthly Guarantee or a gross sales commission percentage. Operational requirements include providing breakfast and lunch, managing 24/7 automated kiosks, and adhering to strict health and safety standards, including ServSafe certification for supervisors and compliance with the Food Allergen Labeling and Consumer Protection Act. All food must originate from sanitarily approved sources and meet specific packaging and labeling criteria. Award decisions will be based on a composite score consisting of a technical evaluation (60 percent), focusing on the operating plan and past performance, and a financial fee proposal (40 percent). Proposals must be submitted electronically or in hard copy to Contracting Officer Michael Thompson by October 30, 2026, at 4:00 PM EDT.

POSTED

about 5 hours ago

DEADLINE

Supplier of Specialized Material (NSN 0001S00000053)This subcontract involves the procurement or manufacture of one unit of specialized hardware identified by NSN/MATERIAL 0001S00000053 to support primes delivering contracts for the Defense Logistics Agency. The selected supplier must ensure all items meet strict DLA technical and quality standards and adhere to RP001 DLA Packaging Requirements for Procurement. The opportunity is categorized under NAICS code 423830 and was posted on October 27, 2026, with a response deadline of November 9, 2026. This requirement is managed through the Department of Defense for the Defense Logistics Agency.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 24 hours ago

DEADLINE

Supplier of Cross Test LevelsThis subcontract involves the procurement or manufacture of two units of the Level, Cross Test, identified by NSN 5210-00-863-5651, to support prime contractors delivering for the Defense Logistics Agency. The supplier is required to ensure all tools are produced in strict compliance with the DLA Master List of Technical and Quality Requirements. Operational requirements include adhering to RP001 DLA Packaging Requirements for all shipments and submitting necessary receiving reports through the Wide Area Workflow system. The contract falls under NAICS code 423830 and is managed under the Department of Defense.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 24 hours ago

DEADLINE

Supply of Identification Markers (NSN 7690016685478)This subcontract involves the manufacture or procurement of three identification markers under NSN 7690016685478 for prime contractors supporting Defense Logistics Agency supply contracts for the USS GABRIELLE GIFFORDS (LCS 10). The selected provider must ensure all units are marked according to MIL-STD-129 with Special Marking Code 32 and packaged in compliance with MIL-STD-2073-1E. The contract falls under NAICS code 339999 and requires strict adherence to DFARS 252.204-7012 regarding the safeguarding of covered defense information. Performance will take place in FPO 96671, with the final deliverable being three properly marked and packaged identification markers.

All Other Miscellaneous Manufacturing

POSTED

about 24 hours ago

DEADLINE

Supply of MIL-PRF-85285 Polyurethane Coating KitThis subcontract involves the supply of a high-solids, multi-component semigloss gray polyurethane coating for prime contractors supporting Defense Logistics Agency Troop Support. The coating must consist of a pigmented polyester resin solvent and a clear aliphatic isocyanate, matching color 26231 per FED-STD-595. All materials must be produced by a QPL approved manufacturer in accordance with MIL-PRF-85285 and packaged according to MIL-STD-129. The scope of work requires the delivery of one coating kit to China Lake, California. This procurement falls under NAICS code 325510 and is managed by the Department of Defense. Interested parties should note the response deadline of October 30, 2026.

Paint and Coating Manufacturing

POSTED

about 24 hours ago

DEADLINE

Vaneaxial Fan and Impeller Manufacturer/SupplierThis subcontract involves the manufacture or procurement of one Vaneaxial Fan and Axial Fan Impeller to support prime contractors fulfilling Defense Logistics Agency supply contracts. The supplier is required to provide hardware that strictly adheres to the technical data specifications for NSN 4140016182401. All supplied components must be of domestic origin and must undergo rigorous quality control to ensure full compliance with RP001 DLA Packaging Requirements and MIL-STD-129 marking standards. The final deliverable consists of one fully packaged and marked fan and impeller assembly. This requirement falls under NAICS code 333998 and is managed by the Department of Defense. Interested parties must submit their responses by November 9, 2026, for performance located at FPO 96693.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 24 hours ago

DEADLINE

Traceable Freight Transport for Armor PlateThis subcontract involves the transportation and delivery of armor plates for prime contractors supporting Defense Logistics Agency Troop Support Construction and Equipment Metals projects. The selected provider is responsible for hauling heavy metal plating using the fastest traceable methods available, specifically excluding the use of parcel post. For international shipments, the contractor must provide comprehensive ocean bills of lading that include the vessel flag and gross weight. Additionally, the provider is required to submit all necessary proof of delivery and tracking documentation to ensure full visibility of the shipments. The work is associated with NAICS code 484220 and is performed under the Department of Defense.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 24 hours ago

DEADLINE

Supply of Armor Plate (NSN 9535-01-611-9013)This subcontract involves the supply of specialized armor plating under NSN 9535-01-611-9013 for prime contractors working on Defense Logistics Agency Troop Support Construction and Equipment projects. The selected provider is responsible for manufacturing or sourcing the armor plate using precision cutting and finishing equipment to ensure strict adherence to technical specifications. All deliverables must comply with MIL-STD-2073-1E packaging standards, specifically requiring the use of a 3 x 2-1/2 inch stiffener to secure items. The contract mandates a delivery timeline of 30 days after the order is placed, with performance centered in the 85613-6000 zip code area.

Fabricated Structural Metal Manufacturing

POSTED

about 24 hours ago

DEADLINE

Defense Logistics Freight Forwarding (USA to Germany)This subcontract involves the specialized transport of aerospace components for prime contractors under Defense Logistics Agency contracts. The scope of work requires the contractor to coordinate the pickup of materials from Eddystone, Pennsylvania, manage all necessary international customs clearance, and ensure final delivery to the NAEW & CF E-3A Component hangar located in Geilenkirchen, Germany. Due to the nature of the cargo, the provider must possess demonstrated experience in international military hardware logistics. The contract is categorized under NAICS code 488510 and mandates a full door-to-door delivery service from the United States to the final overseas destination.

Freight Transportation Arrangement

POSTED

about 24 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on Defense Logistics Agency aerospace contracts. The scope of work involves performing specialized military packaging and marking to ensure components are shipment-ready for international transit. All activities must strictly adhere to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. The contractor is responsible for ensuring that all hazardous material identification and labeling comply with FAR 52.223-3 and DFARS 252.223-7001. This requirement falls under NAICS code 561910. The solicitation was posted on October 27, 2026, with a response deadline of November 9, 2026.

Packaging and Labeling Services

POSTED

about 24 hours ago

DEADLINE

Aerospace Sling Assembly FabricationThis subcontract involves the manufacture and supply of one Sling Assembly for prime contractors supporting Defense Logistics Agency aerospace procurement projects. The contractor is responsible for fabricating the assembly according to Part Number D29810-101 and NSN 4240-01-128-7995, ensuring full adherence to the DLA Master List of Technical and Quality Requirements. The project mandates strict compliance with Buy American requirements and DFARS 252.204-7012 regarding NIST SP 800-171 cybersecurity standards. Interested parties must submit responses by November 9, 2026, for this Department of Defense requirement categorized under NAICS code 336413.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 24 hours ago

DEADLINE

Military Grade Packaging and International Freight ForwarderThis subcontract involves providing specialized military grade packaging and international freight forwarding services for prime contractors under Defense Logistics Agency supply contracts. The scope of work requires strict adherence to MIL-STD-2073-1E and DLA RP001 for packaging, as well as MIL-STD-129 for marking and labeling. The contractor must utilize MIL-SPEC materials and possess the necessary international freight licenses to ensure compliance with military standards. The logistical requirements include managing FOB Destination shipping and customs brokerage to facilitate the delivery of a cabinet to Yokosuka Naval Base in Japan. Performance is centered around the Department of Defense and the Defense Logistics Agency, with the final delivery accepted at the destination. The response deadline for this opportunity is November 9, 2026.

Freight Transportation Arrangement

POSTED

about 24 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Solicitation # SPE1C1-26-Q-0275

Defense Logistics Agency

POSTED

DEADLINE

APPLICATOR, DISPOSAB

Solicitation # SPE2DS-26-T-020G

Defense Logistics Agency

POSTED

DEADLINE

NIPPLE, NURSING BOTT

Solicitation # SPE2DH-26-T-2081

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE2DS-26-T-161V

Defense Logistics Agency

POSTED

CLOSED

RESUSCITATOR, HAND O

Solicitation # SPE2DS-26-T-052E

Defense Logistics Agency

POSTED

DEADLINE

SPONGE, SURGICAL

Solicitation # SPE2DS-26-T-150H

Defense Logistics Agency

POSTED

DEADLINE

DRAINAGE KIT, CLOSED

Solicitation # SPE2DS-26-T-164Y

Defense Logistics Agency

POSTED

CLOSED

TUBE, SUCTION, SURGIC

Solicitation # SPE2DS-26-T-161X

Defense Logistics Agency

POSTED

CLOSED

SUPPORT, ARM, BLOOD A

Solicitation # SPE2DS-26-T-057F

Defense Logistics Agency

POSTED

DEADLINE

CATHETER AND CONNEC

Solicitation # SPE2DS-26-T-161H

Defense Logistics Agency

POSTED

CLOSED

ADMINISTRATION SET,

Solicitation # SPE2DS-26-T-144P

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE1C1-26-P-1027

C AND T SUPPLY CHAIN

POSTED

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS