TUBING, NONMETALLIC

TUBING,NONMETALLIC
TUBING, NON-METALLIC
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
12 FT INCREMENTS. TYPE A, CLASS 2, GRADE 60
FULL AND OPEN COMPETITION APPLY
CONTRACTOR FIRST ARTICLE TESTING REQUIRED PER SQAPMIL-PRF-6855
THIS NSN REQUIRES GOVERNMENT SOURCE INSPECTION
WITH A FIRST ARTICLE TEST REQUIREMENT. THE
GOVERNMENT SOURCE INSPECTION REQUIREMENT IS
VALID ONLY WHEN AN AWARD IS MADE INVOKING THE
FIRST ARTICLE TEST REQUIREMENT. IF THE AWARD
DOES NOT INCLUDE THE FAT REQUIREMENT, INSPECTION
AT DESTINATION IS ACCEPTABLE.
SHELF LIFE MARKINGS REQUIRED PER 5.10.1 OF MIL-STD-129: SHELF-LIFE
MARKINGS SHALL BE SHOWN AS PART OF THE ITEM IDENTIFICATION DATA ON UNIT
PACKS, INTERMEDIATE CONTAINERS, EXTERIOR CONTAINERS, AND UNPACKED ITEMS.
SHELF-LIFE MARKINGS SHALL INCLUDE THE CURED DATE AND THE EXPIRATION
DATE. THE EXPIRATION DATE SHALL BE CALCULATED FROM THE CURE DATE OF THE
RUBBER/ELASTOMER.
"ANY ITEM PREVIOUSLY TESTED BY A VENDOR
IN ACCORDANCE WITH QUALIFICATION
REQUIREMENTS (FOR EXAMPLE: FAT, HIGH
SHOCK AND/OR VIBRATION TEST), STATED ON
DWG, SPECIFICATION, OR STANDARD MAY NOT
REQUIRE FURTHER TESTING BY THE SAME VENDOR
EXCEPT FOR A LATER CHANGE IN DESIGN,
MANUFACTURING PROCEDURES, OR TESTING
REQUIREMENTS. A CERTIFICATION OF
CONFORMANCE WITH PREVIOUS TEST RESULTS
ATTESTING APPLICABILITY SHALL BE
SUBMITTED FOR ITEMS PREVIOUSLY TESTED."
RS030: Shelf-life requirement RS001 for a TYPE I (CODE W) item with a shelf life of 120 months (non-extendable) applies to this item.
IAW BASIC SPEC NR MIL-PRF-6855/4A(1) NOT 1
SPE7M0-26-T-8719
SECTION B
REVISION NR A DTD 06/29/2022
PART PIECE NUMBER: M6855/4-10L105
IAW REFERENCE SPEC NR MIL-PRF-6855F(1) NOT 2
REVISION NR F DTD 08/01/2022
PART PIECE NUMBER:
IAW REFERENCE STD NR MIL-STD-129R(3)
REVISION NR R DTD 02/25/2023
PART PIECE NUMBER: TYPE 1 SHELF LIFE, 120 MONTHS
IAW REFERENCE QAP 16236 SQAPMIL-PRF-6855
REVISION NR DTD 07/22/2009
PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016823996 0001 FT 8.000
NSN/MATERIAL:4720013405852
DELIVERY (IN DAYS):0095
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 10% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:BLK PRES MTHD:AE CLNG/DRY:1 PRESV MAT:00
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:ZZ OPI:O
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W25G1Q
W0L6 USA DEP LETTERKENY
LETTERKENNY ARMY DEPOT
1 OVERCASH AVENUE BLDG 9950
CHAMBERSBURG PA 17201-4150
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
SPE7M0-26-T-8719
SECTION B
PR: 7016823996 PRLI: 0001 CONT’D
FREIGHT SHIPPING ADDRESS:
W25G1Q
W0L6 USA DEP LETTERKENY
LETTERKENNY ARMY DEPOT
1 OVERCASH AVENUE BLDG 9950
CHAMBERSBURG PA 17201-4150
US
MARKFOR
W25G1Q
W0L6 USA DEP LETTERKENY
LETTERKENNY ARMY DEPOT
1 OVERCASH AVENUE BLDG 9950
CHAMBERSBURG PA 17201-4150
US
M/F: (TCN) W25G1Q6133013Q
RDD:
PROJ: TP 1
SUPP ADD: W25G1Q SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A0A DIST: ADV: 2P FC: VF
Need Ship Date:00/00/0000 Original Required Delivery Date:05/18/2026
CONTRACTOR FIRST ARTICLE TEST THE NUMBER OF UNITS SHOWN SIGNIFIES THE
TEST REQUIREMENT. SEE FAR CLAUSE 52.209-3 CITED IN SECTION A OF THIS
SOLICITATION FOR THE ACTUAL QUANTITY REQUIRED.
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 0000000000 EA 1.000
NSN/MATERIAL:0001S00000053
DELIVERY (IN DAYS):0060
THIS LINE ITEM SIGNIFIES THE FIRST ARTICLE TEST REQUIREMENT (FAT). SEE
CLAUSES FOR INFORMATION CONCERNING THE FAT REQUIREMENT. OFFERS THAT DO
NOT CITE A PRICE FOR THIS LINE ITEM SHALL BE EVALUATED UNDER THE
ASSUMPTION THAT THERE IS NO SEPARATE CHARGE FOR THE FAT. IN THE EVENT
THE FAT REQUIREMENT IS WAIVED, NO AWARD WILL BE MADE FOR THIS LINE ITEM.
THE NUMBER OF UNITS SHOWN APPEARS AS “1 EA”. THIS QUANTITY SIGNIFIES
THE TEST REQUIREMENT. OFFERORS WILL FIND THE ACTUAL QUANTITY REQUIRED
BY THE GOVERNMENT FOR THE FAT LINE ITEM PER FAR 52.209-3 OR 52.209-4 IN
SECTION A OF THIS SOLICITATION.
SPE7M0-26-T-8719
SECTION B
PR: PRLI: CONT’D
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
Need Ship Date:00/00/0000 Original Required Delivery Date:00/00/0000
SPE7M0-26-T-8719 NSN/Part Number: 4720-01-340-5852 Quantity: 8 FT Purchase Request: 7016823996QTY: 8 Delivery: 95 days ADO