Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

TUBING, NONMETALLIC

Active
SPE7M0-26-T-079PFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract, identified as SPE7M0-26-T-079P, is for the procurement of nonmetallic tubing, specifically part number 1051F-21-06 from Isometrics Inc, under NSN 4710016626862. The agreement consists of ten separate line items, each for a quantity of one unit, with a required delivery date of September 10, 2026. Delivery is required within five days, with shipping handled via the fastest traceable means to a facility in Collegeville, Pennsylvania. The contract specifies strict adherence to DLA technical and quality requirements, including the prohibition of Class I ozone-depleting chemicals and the application of non-extendable shelf-life requirements. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following RP001 standards. Inspection and acceptance will take place at the destination, and the terms are established as FOB Origin.

General Info

Isometrics Inc will supply ten nonmetallic tubing units to Collegeville, PA by September 2026.

Agency

Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYSView Agency

NAICS

326122 - Plastics Pipe and Pipe Fitting ManufacturingView NAICS

Place of Performance

901 BRIDGE ROAD, COLLEGEVILLE, PA, 19426-4100, USA

Set-Aside

NONE

Documents

(1)

SPE7M0-26-T-079P.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS
ContactsNo contacts available
OfficeUSA
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS
View Agency Profile
Office AddressUSA
ContactsNo contact information available

Full Description

Show more
TUBING,NONMETALLIC
TUBING, NONMETALLIC
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
RS048: Shelf-life requirement RS001 for a Type I (CODE V) (non-Extendable) Shelf Life applies to this item, the Shelf Life months will be identified in the Procurement.
CRITICAL APPLICATION ITEM
ISOMETRICS INC 55242 P/N 1051F-21-06
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018216325 0001 EA 1.000
NSN/MATERIAL:4710016626862
DELIVERY (IN DAYS):0005
SPE7M0-26-T-079P
SECTION B
PR: 7018216325 PRLI: 0001 CONT’D
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W9077E
W8SW PA ARNG FMS 4
901 BRIDGE ROAD
COLLEGEVILLE PA 19426-4100
US
RDD(3-POS RDD)/NMCS SHIPMENT. SHIP BY FASTAST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W9077E
W8SW PA ARNG FMS 4
901 BRIDGE ROAD
COLLEGEVILLE PA 19426-4100
US
MARKFOR
W9077E
W8SW PA ARNG FMS 4
901 BRIDGE ROAD
COLLEGEVILLE PA 19426-4100
US
M/F: (TCN) W9077E62470211
RDD: N
PROJ: TP 1
SUPP ADD: W25KYQ SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A3A DIST: ADV: FC: 62
Need Ship Date:00/00/0000 Original Required Delivery Date:09/10/2026

SPE7M0-26-T-079P
SECTION B
PR: 7018216312 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 7018216312 0001 EA 1.000
NSN/MATERIAL:4710016626862
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W9077E
W8SW PA ARNG FMS 4
901 BRIDGE ROAD
COLLEGEVILLE PA 19426-4100
US
RDD(3-POS RDD)/NMCS SHIPMENT. SHIP BY FASTAST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W9077E
SPE7M0-26-T-079P
SECTION B
PR: 7018216312 PRLI: 0001 CONT’D
W8SW PA ARNG FMS 4
901 BRIDGE ROAD
COLLEGEVILLE PA 19426-4100
US
MARKFOR
W9077E
W8SW PA ARNG FMS 4
901 BRIDGE ROAD
COLLEGEVILLE PA 19426-4100
US
M/F: (TCN) W9077E62470027
RDD: N
PROJ: TP 1
SUPP ADD: W25KYQ SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A3A DIST: ADV: FC: 62
Need Ship Date:00/00/0000 Original Required Delivery Date:09/10/2026

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0003 7018216326 0001 EA 1.000
NSN/MATERIAL:4710016626862
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
SPE7M0-26-T-079P
SECTION B
PR: 7018216326 PRLI: 0001 CONT’D
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W9077E
W8SW PA ARNG FMS 4
901 BRIDGE ROAD
COLLEGEVILLE PA 19426-4100
US
RDD 999/NMCS SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W9077E
W8SW PA ARNG FMS 4
901 BRIDGE ROAD
COLLEGEVILLE PA 19426-4100
US
MARKFOR
W9077E
W8SW PA ARNG FMS 4
901 BRIDGE ROAD
COLLEGEVILLE PA 19426-4100
US
M/F: (TCN) W9077E62470212
RDD: 999
PROJ: TP 1
SUPP ADD: W25KYQ SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A3A DIST: ADV: FC: 62
Need Ship Date:00/00/0000 Original Required Delivery Date:09/10/2026

SPE7M0-26-T-079P
SECTION B
PR: 7018216336 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0004 7018216336 0001 EA 1.000
NSN/MATERIAL:4710016626862
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be
SPE7M0-26-T-079P
SECTION B
PR: 7018216336 PRLI: 0001 CONT’D
as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W9077E
W8SW PA ARNG FMS 4
901 BRIDGE ROAD
COLLEGEVILLE PA 19426-4100
US
RDD 999/NMCS SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W9077E
W8SW PA ARNG FMS 4
901 BRIDGE ROAD
COLLEGEVILLE PA 19426-4100
US
MARKFOR
W9077E
W8SW PA ARNG FMS 4
901 BRIDGE ROAD
COLLEGEVILLE PA 19426-4100
US
M/F: (TCN) W9077E62470333
RDD: 999
PROJ: TP 1
SUPP ADD: W25KYQ SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A3A DIST: ADV: FC: 62
Need Ship Date:00/00/0000 Original Required Delivery Date:09/10/2026

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0005 7018216313 0001 EA 1.000
NSN/MATERIAL:4710016626862
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
SPE7M0-26-T-079P
SECTION B
PR: 7018216313 PRLI: 0001 CONT’D
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
SPE7M0-26-T-079P
SECTION B
PR: 7018216313 PRLI: 0001 CONT’D
W9077E
W8SW PA ARNG FMS 4
901 BRIDGE ROAD
COLLEGEVILLE PA 19426-4100
US
RDD(3-POS RDD)/NMCS SHIPMENT. SHIP BY FASTAST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W9077E
W8SW PA ARNG FMS 4
901 BRIDGE ROAD
COLLEGEVILLE PA 19426-4100
US
MARKFOR
W9077E
W8SW PA ARNG FMS 4
901 BRIDGE ROAD
COLLEGEVILLE PA 19426-4100
US
M/F: (TCN) W9077E62470028
RDD: N
PROJ: TP 1
SUPP ADD: W25KYQ SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A3A DIST: ADV: FC: 62
Need Ship Date:00/00/0000 Original Required Delivery Date:09/10/2026

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0006 7018216322 0001 EA 1.000
NSN/MATERIAL:4710016626862
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
SPE7M0-26-T-079P
SECTION B
PR: 7018216322 PRLI: 0001 CONT’D
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
SPE7M0-26-T-079P
SECTION B
PR: 7018216322 PRLI: 0001 CONT’D
BULK BREAK POINT:
W9077E
W8SW PA ARNG FMS 4
901 BRIDGE ROAD
COLLEGEVILLE PA 19426-4100
US
RDD 999/NMCS SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W9077E
W8SW PA ARNG FMS 4
901 BRIDGE ROAD
COLLEGEVILLE PA 19426-4100
US
MARKFOR
W9077E
W8SW PA ARNG FMS 4
901 BRIDGE ROAD
COLLEGEVILLE PA 19426-4100
US
M/F: (TCN) W9077E62470166
RDD: 999
PROJ: TP 1
SUPP ADD: W25KYQ SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A3A DIST: ADV: FC: 62
Need Ship Date:00/00/0000 Original Required Delivery Date:09/10/2026

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0007 7018216316 0001 EA 1.000
NSN/MATERIAL:4710016626862
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
SPE7M0-26-T-079P
SECTION B
PR: 7018216316 PRLI: 0001 CONT’D
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129.
SPE7M0-26-T-079P
SECTION B
PR: 7018216316 PRLI: 0001 CONT’D
The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W9077E
W8SW PA ARNG FMS 4
901 BRIDGE ROAD
COLLEGEVILLE PA 19426-4100
US
RDD(3-POS RDD)/NMCS SHIPMENT. SHIP BY FASTAST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W9077E
W8SW PA ARNG FMS 4
901 BRIDGE ROAD
COLLEGEVILLE PA 19426-4100
US
MARKFOR
W9077E
W8SW PA ARNG FMS 4
901 BRIDGE ROAD
COLLEGEVILLE PA 19426-4100
US
M/F: (TCN) W9077E62470082
RDD: N
PROJ: TP 1
SUPP ADD: W25KYQ SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A3A DIST: ADV: FC: 62
Need Ship Date:00/00/0000 Original Required Delivery Date:09/10/2026
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE7M0-26-T-079P
SECTION B
PR: 7018216334 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0008 7018216334 0001 EA 1.000
NSN/MATERIAL:4710016626862
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
SPE7M0-26-T-079P
SECTION B
PR: 7018216334 PRLI: 0001 CONT’D
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W9077E
W8SW PA ARNG FMS 4
901 BRIDGE ROAD
COLLEGEVILLE PA 19426-4100
US
RDD 999/NMCS SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W9077E
W8SW PA ARNG FMS 4
901 BRIDGE ROAD
COLLEGEVILLE PA 19426-4100
US
MARKFOR
W9077E
SPE7M0-26-T-079P
SECTION B
PR: 7018216334 PRLI: 0001 CONT’D
W8SW PA ARNG FMS 4
901 BRIDGE ROAD
COLLEGEVILLE PA 19426-4100
US
M/F: (TCN) W9077E62470331
RDD: 999
PROJ: TP 1
SUPP ADD: W25KYQ SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A3A DIST: ADV: FC: 62
Need Ship Date:00/00/0000 Original Required Delivery Date:09/10/2026

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0009 7018216321 0001 EA 1.000
NSN/MATERIAL:4710016626862
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
SPE7M0-26-T-079P
SECTION B
PR: 7018216321 PRLI: 0001 CONT’D
REQUIREMENTS FOR PROCUREMENT
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
SPE7M0-26-T-079P
SECTION B
PR: 7018216321 PRLI: 0001 CONT’D
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W9077E
W8SW PA ARNG FMS 4
901 BRIDGE ROAD
COLLEGEVILLE PA 19426-4100
US
RDD(3-POS RDD)/NMCS SHIPMENT. SHIP BY FASTAST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W9077E
W8SW PA ARNG FMS 4
901 BRIDGE ROAD
COLLEGEVILLE PA 19426-4100
US
MARKFOR
W9077E
W8SW PA ARNG FMS 4
901 BRIDGE ROAD
COLLEGEVILLE PA 19426-4100
US
M/F: (TCN) W9077E62470165
RDD: N
PROJ: TP 1
SUPP ADD: W25KYQ SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A3A DIST: ADV: FC: 62
Need Ship Date:00/00/0000 Original Required Delivery Date:09/10/2026
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE7M0-26-T-079P
SECTION B
PR: 7018216335 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0010 7018216335 0001 EA 1.000
NSN/MATERIAL:4710016626862
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.
SPE7M0-26-T-079P
SECTION B
PR: 7018216335 PRLI: 0001 CONT’D
Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W9077E
W8SW PA ARNG FMS 4
901 BRIDGE ROAD
SPE7M0-26-T-079P
SECTION B
PR: 7018216335 PRLI: 0001 CONT’D
COLLEGEVILLE PA 19426-4100
US
RDD(3-POS RDD)/NMCS SHIPMENT. SHIP BY FASTAST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W9077E
W8SW PA ARNG FMS 4
901 BRIDGE ROAD
COLLEGEVILLE PA 19426-4100
US
MARKFOR
W9077E
W8SW PA ARNG FMS 4
901 BRIDGE ROAD
COLLEGEVILLE PA 19426-4100
US
M/F: (TCN) W9077E62470332
RDD: N
PROJ: TP 1
SUPP ADD: W25KYQ SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A3A DIST: ADV: FC: 62
Need Ship Date:00/00/0000 Original Required Delivery Date:09/10/2026

SPE7M0-26-T-079P NSN/Part Number: 4710-01-662-6862 Quantity: 1 EA Purchase Request: 7018216313QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 326122
New
DIBBS
CLAMP, REPAIR, PIPE
Solicitation # SPE7M1-26-T-330M
This contract is for the procurement of 12 pipe repair clamps, identified by NSN 4730-01-674-2978 and part number SRCTL03 from The Slate River Corporation. The order is issued by the Department of Defense Maritime Supply Chain under solicitation SPE7M1-26-T-330M as a total small business set-aside. Delivery is required within 14 days of order, with a need ship date of October 6, 2026, and a final delivery destination at DLA Distribution San Joaquin in Tracy, California. The agreement mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-129 and MIL-STD-2073-1E. It explicitly prohibits the use of class I ozone depleting chemicals in the manufacturing of the items. Inspection and acceptance will take place at the destination, and the shipping terms are established as FOB Origin.
MARITIME SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326122
New
DIBBS
FITTING, LUBRICATION
Solicitation # SPE7M3-26-T-8698
Solicitation SPE7M3-26-T-8698 is a fixed-price request for quotations issued by the DLA Land and Maritime, Fluid Handling Division, for the procurement of one lubrication fitting, identified by NSN 4730-01-701-7953. The requirement is not a small business set-aside and falls under NAICS code 326122. The item is to be delivered within 20 days after the order date, with shipping terms set as FOB Origin under the First Destination Transportation program. Delivery and inspection are both designated at the destination, specifically for the USNS Sojourner Truth T-AO 210 in San Diego, California. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements and requires packaging and marking in accordance with MIL-STD-129 and ASTM D3951. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS). Compliance with the Buy American Act, the Berry Amendment, and DFARS cybersecurity standards for safeguarding covered defense information is required. Invoicing and payment processing must be conducted electronically through the Wide Area Workflow system.
FLUID HANDLING DIVISION

POSTED

about 6 hours ago

DEADLINE

in 2 days
View Details
NAICS: 326122
New
DIBBS
TUBE ASSEMBLY, METAL
Solicitation # SPE7M4-26-T-385Q
This contract is a solicitation for the procurement of six metal tube assemblies, identified by NSN 4710-01-650-5225 and Lockheed Martin part number 352569-15. The order is issued by the Department of Defense Fluid Handling Division under solicitation number SPE7M4-26-T-385Q. Delivery is required within 20 days, with a required delivery date of September 10, 2026. The items are to be delivered FOB Origin and shipped to the Kuwait Ministry of Defense, Kuwait Air Force, via Compass Forwarding Co Inc. The contract mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards. It specifically prohibits the use of Class I ozone-depleting chemicals in the manufacturing or delivery of the items. Inspection and acceptance will take place at the point of origin. The procurement includes specific technical and quality requirements as defined by the DLA master list, and the quantity variance is set at plus 0% and minus 0%.
FLUID HANDLING DIVISION

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326122
New
DIBBS
CLAMP, HOSE
Solicitation # SPE7M4-26-T-369S
Solicitation SPE7M4-26-T-369S is a fixed-price request for the procurement of eight hose clamps (NSN 4730008279964) for the DLA Land and Maritime Fluid Handling Division. This is designated as a critical application item, with approved part numbers from VIJ Corp, Clampco Products Inc., Mid-State Sales Inc., and Eaton Aeroquip LLC. The required delivery date is March 16, 2027, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to quality and technical standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Environmental compliance is required, specifically the prohibition of Class I ozone-depleting chemicals. Administrative requirements include the use of the Wide Area Workflow system for invoicing and compliance with various FAR and DFARS clauses regarding human trafficking, cybersecurity, and the Buy American Act. The procurement is categorized under NAICS code 326122.
FLUID HANDLING DIVISION

POSTED

about 6 hours ago

DEADLINE

in 2 days
View Details
NAICS: 326122
New
DIBBS
CONNECTOR, HOSE, BULK
Solicitation # SPE7M3-26-T-8634
Solicitation SPE7M3-26-T-8634, issued by the DLA Land and Maritime Fluid Handling Division, is a request for quotations for the procurement of 13 units of bulk hose connectors, identified by NSN 4730017058540. The contract specifies a delivery window with an original required delivery date of January 19, 2027, and a need ship date of February 16, 2027. Delivery is set as FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The procurement is governed by NAICS code 326122 and incorporates various federal regulations, including the Buy American Act and the Berry Amendment. Technical and quality requirements are dictated by the DLA Master List, which takes precedence over the general packaging standard ASTM D3951. All shipments must be palletized according to RP001 and labeled in accordance with MIL-STD-129. Payment and invoicing must be processed through the Wide Area Workflow system. Additionally, the government will not evaluate offers utilizing additive manufacturing, and a price evaluation preference is available for HUBZone concerns.
FLUID HANDLING DIVISION

POSTED

about 6 hours ago

DEADLINE

in 2 days
View Details
NAICS: 326122
New
DIBBS
COUPLING HALF, QUICK DI
Solicitation # SPE7M0-26-T-078Y
This solicitation from the Department of Defense Maritime Supply Chain ESOC Buys is for the procurement of two quick disconnect coupling halves under part number 4730-01-652-2939. The contract requires delivery within five days after the order is placed, with the place of performance located at Yuma Proving Ground. The agreement mandates strict adherence to several regulatory standards, including CMMC Level 2 certification and DLA packaging requirements. It also contains significant export control restrictions under ITAR and EAR, requiring contractors to have an approved US/Canada Joint Certification Program certification and specific training to handle technical data. Additionally, the contract incorporates technical and quality requirements from the DLA master list and requires compliance with configuration change management and covered defense information protocols.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326122
New
DIBBS
TUBE, METALLIC
Solicitation # SPE7M4-26-T-385A
This contract is for the procurement of one metallic tube, identified by NSN 4710016703734 and Tru-Hitch Inc. part number 022445-2. The order is issued by the Department of Defense Fluid Handling Division under solicitation SPE7M4-26-T-385A. Delivery is required within 10 days after receipt of the order, with an original required delivery date of September 8, 2026. The terms specify FOB Origin with inspection and acceptance occurring at the destination. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements. The item is to be shipped to the USAREUR-AF SSA UASL facility in Lingenfeld, Germany. Technical and quality requirements are governed by the DLA Master List, and there is no allowed quantity variance for this line item.
FLUID HANDLING DIVISION

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326122
New
DIBBS
COUPLING ASSEMBLY, TUBE
Solicitation # SPE4A5-26-T-417Y
This contract is for the procurement of two tube coupling assemblies, identified by NSN 4730-01-652-4736 and Boeing part number 417T2061-32. The items are designated as critical application items and require a Certificate of Airworthiness and Conformance for FAA certified parts. The delivery is set for 171 days after the order, with a required delivery date of July 7, 2027, and shipping is designated as FOB Origin. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging, preservation, and marking standards per MIL-STD-129 and MIL-STD-2073-1E. Key compliance measures include the retention of supply chain traceability documentation and the use of specific sampling methods such as MIL-STD-1916 or ASQ H1331. Item Unique Identification is not required for this specific order.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 326122
New
DIBBS
TUBING, NONMETALLIC
Solicitation # SPE7L1-26-T-08M0
LAND SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326122
New
DIBBS
DISCHARGE ASSEMBLY
Solicitation # SPE7L1-26-T-08R9
LAND SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326122
New
DIBBS
TRAP, MOISTURE
Solicitation # SPE7M5-26-T-467Q
ACTIVE DEVICES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326122
New
DIBBS
REDUCER BODY, TUBE
Solicitation # SPE7M3-26-T-8697
This contract is for the procurement of one Reducer Body Tube, identified by NSN 4730-01-678-0409 and part number AL4009349. The order is issued by the Department of Defense Fluid Handling Division under solicitation SPE7M3-26-T-8697, with a required delivery date of August 25, 2026, and a delivery timeframe of 20 days after order. Shipping is designated as FOB Origin, with inspection and acceptance occurring at the destination in Baumholder, Germany. The agreement mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards. Environmental restrictions are explicitly stated, prohibiting the use of Class I ozone-depleting chemicals and the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions. Technical and quality requirements are governed by the DLA Master List, and any substitute chemicals must be submitted for official approval.
FLUID HANDLING DIVISION

POSTED

about 6 hours ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

Same awarding agency

NAICS: 332510
New
DIBBS
PULLER, PIVOT PIN
Solicitation # SPE7M0-26-T-080B
This contract is for the procurement of one Pivot Pin Puller, identified by NSN 2040008966755, under solicitation SPE7M0-26-T-080B. The item must be manufactured according to basic drawing 34228 004966 Revision C. Delivery is required within 20 days after order, with a required delivery date of March 13, 2025, shipped via the fastest traceable means to the USS Hampton. The contractor must adhere to strict marking and packaging standards, including MIL-STD-129 and DLA packaging requirements, ensuring that part numbers and CAGE codes are clearly labeled on all containers. Environmental restrictions prohibit the use of Class I ozone-depleting chemicals and the intentional addition of mercury, except where functionally required by NAVSEA specifications. Inspection and acceptance will take place at the destination.
Hardware Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335312
New
DIBBS
CONTACTOR, MAGNETIC
Solicitation # SPE7M0-26-T-079E
This contract is for the procurement of one magnetic contactor, identified by NSN 6110123352442 and Kissling Elektrotechnik GmbH part number 26.56.08. The order is issued by the Department of Defense under solicitation number SPE7M0-26-T-079E, with a required delivery date of September 9, 2026. Delivery is expected within five days after the order is placed, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The item is to be delivered to the US Army 0101 CS BN CO A Distribution at Fort Riley, Kansas. Compliance with DLA master lists of technical and quality requirements is mandatory, specifically regarding packaging standards ASTM D3951 and MIL-STD-129, as well as DLA packaging requirements for procurement. The contract specifies a zero percent quantity variance and requires the removal of government identification from any non-accepted supplies.
Motor and Generator Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
DIBBS
COVER, ELECTRICAL CONNE
Solicitation # SPE7M0-26-T-079A
This contract is for the procurement of five electrical connector covers, identified by NSN 5935016907190 and Glenair part number 660-024ZZR19H5-01. The order is issued under solicitation SPE7M0-26-T-079A with a required delivery date of September 9, 2026, and a delivery timeframe of five days. Shipping is FOB Origin and destined for the Dep Tobyhanna facility in Pennsylvania. The agreement mandates strict adherence to DLA packaging and marking requirements, specifically MIL-STD-2073-1E and MIL-STD-129. It prohibits the use of Class I ozone-depleting substances in manufacturing and testing without prior written approval. Contractors requesting part number changes or superseding items must provide official manufacturer documentation for approval by the Product Specialist or Engineering Support Activity.
Electronic Connector Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326220
New
DIBBS
HOSE ASSEMBLY, NONMETAL
Solicitation # SPE7M0-26-T-079R
This contract is for the procurement of 14 nonmetallic hose assemblies, identified by NSN 4720-01-589-1315 and Parker-Hannifin part number F387TCJC06060606YE-18. The items are subject to a non-extendable shelf life of 120 months and must be marked according to MIL-STD-129. Delivery is required within five days of the order, with the final destination being the DLA LMP Zone 1 facility in Texarkana, Texas. The agreement mandates strict adherence to DLA technical and quality requirements, including supply chain traceability documentation and the prohibition of Class I ozone-depleting chemicals. Quality assurance will be managed through sampling methods aligned with MIL-STD-1916 or ASQ H1331. Packaging and palletization must comply with RP001 and MIL-STD-2073-1E, and shipping must be conducted via the fastest traceable means, excluding parcel post.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335931
New
DIBBS
COVER, ELECTRICAL CONNE
Solicitation # SPE7M0-26-T-080P
This contract is for the procurement of five electrical connector covers, identified by NSN 5935015924300 and part number 52-9960-001 from Prime Technology LLC. The order is issued by the Department of Defense under solicitation SPE7M0-26-T-080P with a required delivery date of September 2, 2026, and a delivery timeframe of five days after receipt of order. Shipping is FOB Origin and must be sent via the fastest traceable means to the Portsmouth Naval Shipyard. The agreement mandates strict adherence to DLA packaging and marking requirements, specifically MIL-STD-2073-1E and MIL-STD-129. It includes a prohibition on the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions defined by NAVSEA. Inspection and acceptance will take place at the destination, and the contract incorporates technical and quality requirements maintained in the DLA Master List.
Current-Carrying Wiring Device Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR NETWORK, FIXED
Solicitation # SPE7M0-26-T-078E
This contract is for the procurement of 15 fixed film resistor networks, identified by NSN 5905015258659 and Vishay Dale Electronics part number MDP1401241J. The order is issued by the Department of Defense under solicitation SPE7M0-26-T-078E, with a required delivery date of September 10, 2026, and a delivery timeframe of five days after order. Shipping is FOB Origin and destined for Fort Bragg, North Carolina, via the fastest traceable means. The contractor must adhere to strict packaging and marking standards, including MIL-STD-129 and IPC/JEDEC J-STD-609 for lead finish identification. Specialized electrostatic discharge and electromagnetic interference protection are required per MIL-PRF-81705 to prevent damage to component leads and terminals. All technical and quality requirements are governed by the DLA Master List, and the contract specifies a zero percent quantity variance.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334419
New
DIBBS
DELAY LINE
Solicitation # SPE7M0-26-T-080K
This contract is a solicitation for a Delay Line, identified by NSN 5999013696807, issued by the Department of Defense under solicitation number SPE7M0-26-T-080K. The requirement is for one unit to be delivered FOB Origin to Schofield Barracks, Hawaii, with a delivery timeframe of five days after order. The procurement includes specific technical and quality requirements, such as CMMC Level 2 self-assessment, DLA packaging standards, and strict sampling methods based on MIL-STD-1916 or ASQ H1331. The agreement specifies that inspection and acceptance will occur at the destination. It mandates compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, while also requiring adherence to IP025 for the handling of hazardous materials. Approved manufacturers include Lockheed Martin Corporation, Micro Networks Corporation, Kappa Technologies Inc., and ESC Control Electronics LLC. The original required delivery date is set for September 8, 2026.
Other Electronic Component Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
UNION, TUBE
Solicitation # SPE7M0-26-T-080E
This contract is a solicitation for the procurement of eight tube unions, identified by NSN 4730-01-143-0804 and part number 36011V08 from Eaton Aeroquip LLC. The order is issued by the Department of Defense under solicitation number SPE7M0-26-T-080E, with a required delivery date of September 14, 2026. Delivery is required within five days after the order is received, with FOB and inspection points set at the origin. The shipment must adhere to specific packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129, as well as DLA packaging requirements. Logistics involve a freight forwarder, DF Young Inc in Eddystone, Pennsylvania, for final delivery to the NAEW & CF E-3A Component facility in Geilenkirchen, Germany. The contract also incorporates technical and quality requirements as specified in the DLA Master List.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335931
New
DIBBS
CONTACT, ELECTRICAL
Solicitation # SPE7M0-26-T-078M
This contract is for the procurement of four electrical contacts, identified by NSN 5999-01-567-6739, under solicitation number SPE7M0-26-T-078M. The order specifies parts from Newark Electronics Corporation and Souriau USA, Inc. Delivery is required within five days after the order, with a required delivery date of September 8, 2026. The items are to be shipped FOB Origin to the Fleet Readiness Center Northwest at Naval Air Station Whidbey Island in Oak Harbor, Washington. The agreement mandates strict adherence to DLA packaging and quality requirements, including RP001 for palletization and MIL-STD-129 for marking and labeling. Packaging must follow ASTM D3951 for non-hazardous materials or TQ requirement IP025 for hazardous materials. Inspection and acceptance will take place at the destination. The contract is managed by the Department of Defense Maritime Supply Chain ESOC Buys.
Current-Carrying Wiring Device Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332919
New
DIBBS
COUPLING, TUBE
Solicitation # SPE7M0-26-T-078R
This contract is for the procurement of tube couplings, identified by NSN 4730015566732 and part number 592946C91. The order consists of 0.200 boxes, with each box containing five units. Delivery is required within five days after the order is placed, with the shipping terms set as FOB Origin and the inspection and acceptance points located at the destination. The items must be delivered to the MS ARNG activity at Camp Shelby in Hattiesburg, Mississippi. Packaging must comply with ASTM D3951 and MIL-STD-129, while adhering to DLA packaging requirements for procurement. The contract specifies that all technical and quality requirements from the DLA Master List take precedence, and shipments must be sent via the fastest traceable means, explicitly prohibiting the use of parcel post.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332919
New
DIBBS
ELBOW, HOSE TO BOSS
Solicitation # SPE7M0-26-T-078S
This contract is for the procurement of one hose to boss elbow, identified by NSN 4730015979358 and Daimler Truck North America part number PH 1695HB64. The order is issued by the Department of Defense under solicitation SPE7M0-26-T-078S with a required delivery date of September 8, 2026. Delivery is required within five days after the order is placed, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination in Fort Hood, Texas. The supplier must adhere to DLA packaging requirements, specifically ASTM D3951 and MIL-STD-129, and comply with the DLA Master List of Technical and Quality Requirements. A critical environmental restriction prohibits the use of Class I ozone depleting chemicals in the production or delivery of the item. Shipment must be made via the fastest traceable means to the specified distribution point at Fort Hood, and the use of parcel post is strictly prohibited.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 114119
New
DIBBS
WARDROBE
Solicitation # SPE7M0-26-T-077Q
This solicitation, issued by the Department of Defense Maritime Supply Chain ESOC Buys, is for the procurement of two gray wardrobes under NSN 2090-00-802-8314. The contract requires delivery within five days after the order is placed, with the place of performance located in Norfolk, Virginia. The agreement incorporates specific technical and quality requirements as defined by the DLA Master List. Additionally, the contract is subject to strict export controls under ITAR and EAR regulations, meaning technical data cannot be exported or disclosed to foreign nationals without prior authorization. Access to this data is limited to contractors with approved US/Canada Joint Certification Program certification and completed DLA export-control training.
Other Marine Fishing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS