Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Underground Conduit and Wiring

Active

State & Local

Response Deadline08/06/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the installation of underground conduit, pull boxes, and wiring to connect signal poles with a control cabinet, encompassing all associated civil work such as trenching, backfilling, and restoration of paved surfaces. The scope requires precise execution of subsurface utilities to ensure reliable electrical and signal connectivity while minimizing disruption to existing infrastructure and aesthetics. All work must comply with local standards for durability, safety, and environmental compliance, with particular attention to proper pavement reinstatement post-installation. This is a subcontract issued by the Forsyth County Board of Commissioners in Georgia, categorized under NAICS code 238210 for site preparation and utility installation. The solicitation was posted on July 13, 2026, with a firm response deadline of August 6, 2026, at 7:00 PM. While the solicitation number and point of contact are not provided, the opportunity is accessible via the Georgia Department of Administrative Services procurement portal for qualifying subcontractors to submit proposals. No set-aside designation is specified, indicating open competition to all eligible contractors.

General Info

Install underground conduit, wiring, and civil work for signal poles to control cabinet in Forsyth County, Georgia.

Agency

Georgia → Forsyth County Board of CommissionersView Agency

NAICS

238210 - Electrical Contractors and Other Wiring Installation ContractorsView NAICS

Place of Performance

GA, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 13

subcontract

Response DeadlineAug 6

Submission deadline

Response Deadline

08/06/2026, 07:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyGeorgia → Forsyth County Board of Commissioners

ContactsNo contacts available

OfficeN/A

Organization / Agency

Georgia → Forsyth County Board of Commissioners

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Installation of underground conduit, pull boxes, and wiring between signal poles and control cabinet, including trenching, backfill, and pavement restoration.

Similar Contracts

Same NAICS industry code

Electrical Installation and Wiring ServicesThe contract titled Electrical Installation and Wiring Services is a subcontract under a Total Small Business Set-Aside, as defined by the SBA, meaning only small businesses are eligible to bid. It falls under NAICS code 238210, which covers electrical contracting services, and involves the installation of comprehensive electrical systems for commercial or infrastructure projects, including wiring, conduits, lighting, and power distribution components. The solicitation was posted on August 1, 2026, with a deadline for responses set for August 24, 2026, and is managed by the ASC Commodities Division within the Department of Defense. While specific location details and point of contact information are not provided, the contract is accessible via a DIBBS portal link, indicating it will be procured through Department of Defense procurement systems.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Elevator Lobby 2 Way CommunicationsThe contract involves the installation of 23 new two-way communication boxes in elevator lobbies across the terminal, including 17 passenger elevators, three service elevators, and three ramp landing elevators. This work is part of a broader effort to enhance emergency communication infrastructure within the airport facility and is being managed by the Aviation Project Management Group under the Port of Seattle. The project is forecasted with a posting date of July 31, 2026, and falls under NAICS code 238210, indicating it pertains to electrical contracting services. Primary point of contact is Angela Peterson, with Christina Burdett serving as the project manager, and all correspondence should be directed through the provided email addresses and phone numbers. The work location is at the Port of Seattle facility, though specific city or state details are not provided in the data.

Aviation Project Management Group

POSTED

about 1 hour ago

DEADLINE

Variable Frequency Drives (VFD) Replacement Phase 3 (DBB)The Port of Seattle will replace 125 aging Robicon variable frequency drives (VFDs) with new equipment as part of Phase 3 of its VFD Replacement initiative. This effort aims to upgrade outdated infrastructure to ensure system reliability and improve operational efficiency across aviation facilities and infrastructure. The new VFDs will be fully integrated with the Port’s Direct Digital Controller (DDC) system to enable real-time energy usage monitoring, output control readings, and efficiency tracking, enhancing the Port’s ability to manage power consumption and maintain optimal performance. The scope includes all necessary wiring, testing, commissioning, and installation of associated equipment required to deliver a fully functional and synchronized system. The work falls under NAICS code 238210 and is managed by the Aviation Facilities & Infrastructure division, with technical oversight from Project Manager Sharon Miick and primary point of contact Yanet Maldonado. Although the solicitation number and set-aside details are not specified, the forecast was posted on July 31, 2026, signaling upcoming procurement activities. The project is critical for modernizing the Port’s electrical infrastructure and supporting long-term sustainability goals through precise control and monitoring of motor-driven systems. All work must be performed on-site at the Port’s facilities, with full accountability for system integration, performance validation, and operational readiness upon completion.

Aviation Facilities & Infrastructure

POSTED

about 1 hour ago

DEADLINE

Operational Security Cameras Bagwell and North Cargo AreasThe contract requires the provision of design, permitting, and construction services to install 50 high-resolution cameras across 43 sites in the Bagwell and North Cargo Operations areas of the Port of Seattle. The primary objective is to enhance security and enforcement capabilities by replacing outdated systems with improved coverage, specifically targeting main terminal drive lanes and entrances previously unmonitored, with the goal of supporting forensic investigations and adherence to port movement rules. In the Bagwell area, the new cameras will shift focus from conveyor systems and security doors to critical transit corridors, while the North Cargo operations will benefit from flexible, user-controlled Pan Tilt Zoom units that provide broad surface area monitoring and dynamic viewing capabilities to address operational gaps. All work must be completed in accordance with specified technical and operational standards to ensure seamless integration with existing security infrastructure. The project is managed by the Aviation Project Management Group under the Port of Seattle, with primary point of contact Angela Peterson and Project Manager Randa Williams available for coordination. The North American Industry Classification System code 238210 identifies this as a specialty trade contracting effort focused on electrical and communication system installation. Although the solicitation has not yet been formally issued, the forecasted posting date is July 31, 2026, indicating this is a forward-looking opportunity for qualified contractors to prepare proposals. The place of performance is within the Port of Seattle’s operational boundaries, and all contractors must be prepared to navigate port-specific logistics, security protocols, and environmental constraints during installation and commissioning.

Aviation Project Management Group

POSTED

about 1 hour ago

DEADLINE

Rental Car Facility (RCF) Quick Turn Around (QTA) Area Fire Suppression System Replacement (Re-bid)The Port of Seattle’s Aviation Project Management Group is planning to replace the existing Aqueous Film Forming Foam (AFFF) fire suppression system at the Rental Car Facility located in SeaTac with a full dry chemical system to eliminate contamination from per- and polyfluoroalkyl substances (PFAS). The project entails the complete removal of the current foam-based system, including all contaminated components such as tanks, piping, and sprinkler heads, followed by the design and installation of a new dry system comprising new storage tanks, control valves, pumps, sprinkler lines, and sprinkler heads, along with reserve tanks for system integrity. The new system must be fully integrated with the facility’s existing Fire Alarm System to ensure seamless operation and compliance with safety protocols. The work is classified under NAICS code 238210 and is being advertised as a re-bid under the title Rental Car Facility (RCF) Quick Turn Around (QTA) Area Fire Suppression System Replacement, targeting an efficient and timely execution to minimize service disruption. Primary point of contact for inquiries is Todd Rehm, with Pat Nakamura serving as the Project Manager.

Aviation Project Management Group

POSTED

about 1 hour ago

DEADLINE

Parking Garage UPSThe contract involves the demonstration and full replacement of the existing uninterruptible power supply (UPS) system in a parking garage that supports critical operations including ticketing kiosks and automated gates. The scope includes installing new UPS equipment along with associated electrical infrastructure such as subpanels, feeders, disconnects, and circuit breakers to ensure reliable backup power. The new UPS system will feature integrated data connections to enable remote alarm monitoring and system diagnostics, enhancing operational awareness and response capabilities. All work will be performed at the Port of Seattle’s parking facility, under the oversight of the Aviation Project Management Group. The project is forecasted to be released on July 31, 2026, with no set-aside provisions indicated and NAICS code 238210 specifying electrical contracting services. Primary point of contact is Yanet Maldonado, reachable via email and phone, with JJ Jordan serving as the project manager for coordination and technical inquiries. All work must comply with the operational and safety standards required by the Port of Seattle, and performance is expected to be completed at the designated parking garage location without specified alternative sites.

Aviation Project Management Group

POSTED

about 1 hour ago

DEADLINE

Electrical Unit Price Portwide 2026_1 and _2This contract encompasses a broad range of electrical services to be performed across multiple Port of Seattle facilities including Seattle-Tacoma International Airport, maritime properties, and surrounding areas. The work includes but is not limited to the installation of raceways, wiring, medium voltage cabling, electrical boxes, transformers, temporary power and lighting systems, grounding, and associated testing, all in full compliance with applicable codes and regulations. The Contractor is responsible for providing all labor, tools, equipment, materials, and incidentals required to complete tasks as directed through Work Authorizations issued by the Port. Labor must be delivered according to the specified classifications outlined in the Schedule of Unit Prices, ensuring consistent pricing and accountability. The Port of Seattle anticipates a high volume of small-scale electrical projects over the coming year and plans to award two separate contracts under this solicitation to ensure sufficient capacity and rapid response times. The goal is to maintain operational continuity and meet dynamic project demands by leveraging two qualified contractors. The contract is identified under the NAICS code 238210 and is issued through Port Construction Services, with primary coordination handled by Heather Bowden and Lesley Miles. All work must be performed at designated Port-wide locations, and contractors are expected to adhere strictly to the terms and pricing structure detailed in the bid documents.

Port Construction Services

POSTED

about 1 hour ago

DEADLINE

Circuit Tracing and Load VerificationThe contract titled Circuit Tracing and Load Verification requires systematic identification, testing, and documentation of electrical circuits to ensure safety and compliance through accurate load capacity verification. Work must be performed at the specified location in Monteagle, Tennessee, with a zip code of 37356-7609, and is classified under NAICS code 238210 for electrical contracting services. The solicitation is issued as a subcontract under the Tennessee Department of Environment and Conservation, part of the Tennessee state government, with the posting date set for August 1, 2026, and a firm response deadline of August 17, 2026, at 7:00 PM. All activities must meet stringent technical and regulatory standards for electrical system integrity, including thorough recordkeeping and verification procedures to confirm that circuits operate safely within their designed capacity. There is no set-aside designation indicated, and all qualified subcontractors are eligible to respond.

Tennessee Department of Environment and Conservation

POSTED

about 13 hours ago

DEADLINE

Electrical System Installation – New Wiring & DevicesThe contract involves the installation of a new electrical system including wiring, outlets, switches, panels, and associated devices within a facility located in Monteagle, Tennessee, with the zip code 37356-7609. All work must strictly comply with the National Electrical Code and applicable local regulations to ensure safety and code adherence. The project is structured as a subcontract and falls under NAICS code 238210, which categorizes electrical contracting services. The solicitation was posted on August 1, 2026, and responses are due by August 17, 2026, at 7:00 PM. The Tennessee Department of Environment and Conservation, through its Tennessee office, is the procuring agency, though no specific point of contact or additional organizational details are provided. The place of performance is clearly identified as Monteagle, and no other locations are referenced in the contract terms.

Tennessee Department of Environment and Conservation

POSTED

about 13 hours ago

DEADLINE

Electrical System Replacement – Demolition & RemovalThe contract calls for the complete removal and disposal of all existing electrical components at the Fiery Gizzard State Park Visitor Center, including panels, wiring, fixtures, and conduit. This work is classified as a subcontract under NAICS code 238210, which pertains to electrical contracting services, and is being procured by the Tennessee Department of Environment and Conservation. All demolition and removal activities must be performed in accordance with safety and environmental standards, with the work site located in Monteagle, Tennessee, at zip code 37356-7609. The solicitation was posted on August 1, 2026, and responses are due by August 17, 2026, by 7:00 PM. The contract does not specify a set-aside classification, nor does it indicate any restricted participation criteria. All qualified contractors are expected to deliver professional, compliant removal services, ensuring safe handling and proper disposal of all electrical materials.

Tennessee Department of Environment and Conservation

POSTED

about 13 hours ago

DEADLINE

Fire Alarm and Sprinkler System Improvements at State Aided Developments

Solicitation # BD-24-1827-FISD1-PD001-132000

The Lynn Housing Authority & Neighborhood Development is soliciting sealed bids for the installation and improvement of fire alarm and sprinkler systems across three state-aided residential developments in Lynn, Massachusetts: Caggiano Plaza at 170 South Common Street, McGee House at 37 Green Street, and Shepard & Warren at 35 Shepard Street. The project is being managed under the direction of MACRITCHIE ENGINEERING, INC., and all bid documents and specifications are available for review through the biddocs portal. The solicitation, identified as BD-24-1827-FISD1-PD001-132000, was posted on August 1, 2026, with responses due by September 9, 2026, at 8:00 PM. Bidders must comply with all technical, safety, and regulatory requirements outlined in the contract documents. The awarding authority is the Fiscal Department of Massachusetts, operating under the State, Local, and Educational (SLED) classification, and all work must be performed at the specified locations in Lynn. The primary point of contact for inquiries is Charles Mihos, Purchaser, and all submissions must be delivered as sealed bids in accordance with the outlined procedures. Contractors are expected to meet all applicable building codes and fire safety standards for state-funded housing developments, with the project scope covering both alarm system upgrades and full sprinkler system installations across the three properties.

FISD1 - Fiscal Department

POSTED

about 13 hours ago

DEADLINE

in about 1 month

Fiery Gizzard S.P. Electrical System

Solicitation # 32701-0000013973

This solicitation, numbered 32701-13973, is for a one-time purchase by the Tennessee Department of Environment and Conservation to replace the entire electrical system at the Fiery Gizzard State Park Visitor Center located in Monteagle, TN 37356-7609. The scope includes complete demolition and removal of existing electrical components such as panels, wiring, fixtures, and conduit, followed by installation of a new system meeting current National Electrical Code, International Residential Code, and NFPA standards. All work must be performed under full-time contractor supervision, include proper labeling of electrical components, submit documentation like load calculations and manufacturer warranties, and leave the site broom clean upon completion. The contract is awarded on a Lowest Price Technically Acceptable basis, meaning the lowest bid from a respondent who meets all technical requirements will be selected. The response deadline is August 17, 2026 at 2:00 PM CDT, and submissions must be made electronically through the State’s Edison Supplier Portal, with no exceptions for late filings. All bidders must be registered with the State of Tennessee, hold a valid Tennessee contractor’s license, be registered with the Department of Revenue, and comply with state statutes regarding the Iran Divestment Act and boycott of Israel. Contractors must not knowingly employ illegal immigrants, must provide a payment bond to ensure payment to subcontractors and suppliers, and must certify they are not debarred or suspended from state or federal contracts. All deliverables become the sole property of the State upon delivery. Special conditions include a prohibition on tobacco smoking in any indoor area servicing individuals under 18, no implication of state endorsement in marketing materials, and the State's right to expand scope via a Memorandum of Understanding requiring written offeror approval within 10 business days. Invoices must be submitted electronically to the Department of Environment and Conservation, exclude tax line items, include the contract number and period of performance, and be routed to the designated remittance address in Burns, TN. The contract has no defined monetary value in the solicitation, and no specific packaging, preservation, or military standards apply; however, all materials must follow manufacturer instructions and applicable state codes. Bidder registration, profile updates, and password maintenance are the vendor’s responsibility, with portal access expiring every 90 days and session timeouts occurring after 30 minutes of inactivity.

Tennessee Department of Environment and Conservation

POSTED

about 13 hours ago

DEADLINE

More opportunities from Georgia → Forsyth County Board of Commissioners

Same awarding agency

Fire Hydrant Field Testing

Solicitation # PE-65800-NONST-2026-000000104

Forsyth County, Georgia, through its Board of Commissioners, is soliciting bids for comprehensive fire hydrant field testing services covering all hydrants within the county, including those in the City of Cumming. The solicitation, identified as PE-65800-NONST-2026-000000104, was posted on July 31, 2026, and requires responsive proposals to be submitted no later than September 3, 2026, at 7:00 p.m. All work must be performed in accordance with the specific terms, conditions, and technical specifications outlined in the Invitation to Bid. The contract is open to qualified providers with the expertise to conduct field testing of fire hydrants to ensure proper functionality and compliance with safety standards. The point of contact for this solicitation is Ryan Eckelberry, reachable at 770-888-8872 or raeckelberry@forsythco.com. The services are to be carried out entirely within the geographic boundaries of Forsyth County, Georgia. Proposals must be submitted through the designated state procurement portal, and interested parties are encouraged to review all requirements thoroughly before bidding. While no set-aside classification is indicated, bidders are expected to demonstrate capability, experience, and adherence to all technical and procedural guidelines referenced in the official documentation.

Fire Protection

POSTED

DEADLINE

in about 1 month

Debris Hauling and Site CleanupThe contract titled Debris Hauling and Site Cleanup involves the removal and disposal of milled asphalt, construction debris, and other waste materials generated at project sites within Forsyth County, Georgia. The work is classified as a subcontract under NAICS code 484220, which pertains to trucking and waste haulage services, and is intended to support local infrastructure or development projects by ensuring proper cleanup and environmental compliance. The solicitation was posted on July 13, 2026, with a response deadline of August 13, 2026, at 7:00 PM, indicating a four-week window for potential bidders to submit proposals. Performance is expected to occur within the geographic jurisdiction of Forsyth County, though specific locations are not detailed. The contract is administered by the Forsyth County Board of Commissioners under the Georgia state system, with no set-aside provisions specified, meaning it is open to all eligible subcontractors regardless of business size or ownership demographics. Interested parties must submit responses through the provided online portal prior to the deadline to be considered.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Quality Testing and Materials InspectionForsyth County Board of Commissioners is seeking a subcontractor to perform third-party quality testing of asphalt materials during pavement application, ensuring adherence to Superpave specifications and county standards. The scope includes comprehensive evaluation of asphalt mix properties, compaction levels, layer thickness, and temperature measurements throughout the installation process to verify compliance with technical and regulatory requirements. Testing must be conducted by qualified personnel using calibrated equipment and documented methods that align with accepted industry practices and local guidelines. The solicitation was posted on July 13, 2026, with proposals due by August 13, 2026, and falls under NAICS code 541350 for engineering services. The work is expected to occur across county-maintained road projects, with all testing performed on-site to support quality assurance and pavement performance monitoring.

Building Inspection Services

POSTED

DEADLINE

Roadway Milling (Surface Preparation)Forsyth County Board of Commissioners is seeking a subcontractor to perform roadway milling of existing pavement surfaces in preparation for a new asphalt overlay. The work is classified under NAICS code 238990 and is intended to properly prepare road surfaces to ensure optimal adhesion and longevity of the new asphalt layer. The solicitation was posted on July 13, 2026, with a response deadline set for August 13, 2026, at 7:00 PM. The contract is structured as a subcontract and does not specify any set-aside provisions or organizational type restrictions. The place of performance is within Forsyth County, Georgia, though specific project locations are not detailed in the provided data. All interested parties must submit proposals through the official portal linked in the solicitation.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Traffic Control and Signage ManagementForsyth County Board of Commissioners is seeking a subcontractor to provide comprehensive traffic control and signage management services for road resurfacing projects. The contract requires the installation, maintenance, and removal of temporary traffic control zones including signage, cones, and flagging operations to ensure public safety and traffic flow during construction activities. The work must comply with applicable state and federal standards for temporary traffic management, and performance is expected within the geographic jurisdiction of Forsyth County, Georgia. The solicitation was posted on July 13, 2026, with a response deadline of August 13, 2026, and is classified under NAICS code 561720 for services related to landscape and other support activities for transportation. Subcontractors must be prepared to deploy qualified personnel and equipment to implement and sustain traffic control measures around the clock as needed, with no set-aside provisions specified.

Janitorial Services

POSTED

DEADLINE

Asphalt Supply (Ready-Mix/Hot Mix)Forsyth County Board of Commissioners is seeking a subcontractor to supply hot-mix asphalt that meets Superpave Design Level 1 specifications for use in road resurfacing projects. The contract is specifically for ready-mix asphalt and requires strict adherence to industry-standard performance grading and mix design protocols to ensure durability and safety in pavement applications. The solicitation was posted on July 13, 2026, with responses due by August 13, 2026, at 7:00 PM Eastern Time. The NAICS code 324121 identifies this as an asphalt paving materials manufacturing procurement, and the work will be performed within Forsyth County, Georgia. There is no set-aside classification indicated, and the contract is not tied to any specific small business or minority-owned business preferences. Interested parties must submit proposals through the official state procurement portal linked in the notice.

Asphalt Paving Mixture and Block Manufacturing

POSTED

DEADLINE

Asphalt Resurfacing (Paving)Forsyth County is seeking qualified contractors to perform full-depth asphalt resurfacing on 55.31 miles of roadways, requiring complete preparation, application, and compaction in accordance with Superpave specifications to ensure long-term durability and performance. The work must meet all technical and quality standards outlined for pavement systems, with attention to material compatibility, layer thickness, and proper compaction techniques to deliver a uniform, high-quality surface. The solicitation is classified as a subcontract with a NAICS code of 237310, indicating it falls under Highway, Street, and Bridge Construction. Responses are due by August 13, 2026, at 7:00 PM, with the opportunity posted on July 13, 2026. The contracting authority is the Forsyth County Board of Commissioners in Georgia, and the project will be carried out within the county’s jurisdiction. The contract opportunity is accessible through the Georgia Department of Administrative Services portal, though specific contact details and precise location data are not provided in the posting.

Highway, Street, and Bridge Construction

POSTED

DEADLINE

2026 Road Resurfacing Program

Solicitation # PE-65800-NONST-2026-000000102

Forsyth County, Georgia is soliciting bids for its 2026 Road Resurfacing Program to address the resurfacing of 55.31 miles of roads, requiring full provision of materials, equipment, and labor. All asphalt mixtures must adhere to the Superpave Design Level 1 specifications to ensure durability and performance under regional traffic and climate conditions. The solicitation, identified as PE-65800-NONST-2026-000000102, was posted on July 13, 2026, with a deadline for responses set for August 13, 2026, at 7:00 PM. Proposals must be submitted through the Georgia Procurement Registry, and all work is to be performed within Forsyth County. The contract is being managed by the Forsyth County Board of Commissioners, with Edith Compean listed as the primary point of contact for inquiries. The procurement does not specify a set-aside classification and is open to all qualified vendors meeting technical and compliance requirements.

Highway, Street, and Bridge Construction

POSTED

DEADLINE

Pavement Cutting and RestorationForsyth County Board of Commissioners is seeking a subcontractor to perform pavement cutting for the installation of conduits and subsequent restoration of asphalt and concrete surfaces to their original condition. The work requires precise cutting techniques to accommodate utility lines without compromising surrounding infrastructure, followed by thorough restoration that ensures safety, durability, and aesthetic alignment with existing roadways. The contract falls under NAICS code 238990 for other specialty trade contractors and is open for bidding with a response deadline of August 6, 2026. The solicitation is posted on the Georgia state procurement system, and all work is expected to be performed within Forsyth County, though exact locations are not specified in the provided data. The project requires compliance with local standards for pavement restoration, including proper compaction, curing, and surface finishing to prevent future deterioration or liability issues.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Traffic Signal Equipment and Materials SupplyForsyth County Board of Commissioners is seeking subcontractors to supply traffic signal equipment including signal heads, poles, mast arms, control cabinets, conflict monitors, and detection loops or radar sensors under a procurement titled Traffic Signal Equipment and Materials Supply. The solicitation was posted on July 13, 2026, with a response deadline of August 6, 2026, at 7:00 PM. The contract falls under NAICS code 423830, which classifies it as Wholesale Trade of Electric and Other Wiring Equipment and Supplies. The place of performance is not specified beyond the state of Georgia, and no set aside provisions are indicated, meaning the opportunity is open to all eligible subcontractors. All proposals must be submitted by the stated deadline through the official Georgia procurement portal linked in the posting.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Concrete Foundations and Base WorkThe contract entails the supply and installation of concrete foundations and base structures for signal pole footings, pull boxes, and cabinet pads, encompassing all associated work such as formwork construction, rebar placement, and proper curing procedures to ensure structural integrity. The work is scoped for public infrastructure applications and requires adherence to specified engineering standards and quality controls for durability under environmental and load conditions. All materials and labor must be provided by the subcontractor to meet performance requirements without reliance on external support. This subcontract is issued by the Forsyth County Board of Commissioners in Georgia under NAICS code 238110 for concrete work and is open for bids with a response deadline of August 6, 2026. The project is part of an ongoing public works initiative and will be executed on-site within Forsyth County, though the exact location details are not specified. The solicitation is not designated for any specific set-aside program, and interested parties must submit their proposals through the designated state portal prior to the deadline to be considered for award.

Poured Concrete Foundation and Structure Contractors

POSTED

DEADLINE

Traffic Signal Design and Engineering ServicesForsyth County Board of Commissioners is seeking a subcontractor to provide comprehensive professional engineering services for traffic signal design and implementation, including the development of signal timing plans, phasing configurations, detection system layouts, and detailed electrical schematics. The scope also encompasses the preparation of shop drawings and support throughout the permitting process to ensure compliance with local and state regulations. The contract is posted under NAICS code 541330 for architectural and engineering services and is categorized as a subcontract opportunity with a response deadline of August 6, 2026. The work is expected to be performed in Georgia, though specific location details are not provided, and all deliverables must align with the county’s infrastructure standards and project requirements.

Engineering Services

POSTED

DEADLINE