Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Undetermined Subcontract Opportunity due to Lack of Scope Data

Active

International

Response Deadline08/06/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

No specific subcontract opportunities can be identified at this time due to the absence of a Statement of Work, CLINs, technical specifications, or deliverables in the prime contract documentation. The solicitation, posted on July 22, 2026, with a response deadline of August 6, 2026, is classified as a subcontract opportunity under the National Research Council of Canada, part of the Government of Canada, and is associated with a place of performance in Newfoundland and Labrador. Without defining scope details, the nature of potential work, eligible vendors, or set-aside provisions remains undetermined. The contract is not tied to a NAICS code, organizational type, or point of contact, and the official notice can be accessed via the CanadaBuys platform.

General Info

No subcontract opportunities identified; solicitation open until August 6, 2026, under Government of Canada.

Agency

Government of Canada → National Research Council of CanadaView Agency

NAICS

Place of Performance

Canada, Newfoundland and Labrador, CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 22

subcontract

Response DeadlineAug 6

Submission deadline

Response Deadline

08/06/2026, 07:00:00 PM UTCin 15 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyGovernment of Canada → National Research Council of Canada

ContactsNo contacts available

OfficeN/A

Organization / Agency

Government of Canada → National Research Council of Canada

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

No specific subcontract opportunities can be identified at this time due to absence of Statement of Work, CLINs, technical specifications, or deliverables in the prime contract documentation.

Similar Contracts

Same NAICS industry code

Subcontract Opportunity Not IdentifiableNo substantive contract details are available to identify specific subcontract opportunities; the document consists solely of a Conflict of Interest Questionnaire without any scope, deliverables, or performance requirements. The solicitation is listed under the title “Subcontract Opportunity Not Identifiable,” posted on July 17, 2026, with a response deadline of August 5, 2026, and is associated with the City of Denton in Texas, though no official agency organization name, NAICS code, set-aside type, or point of contact is provided. The place of performance and office address fields are all unspecified, and the only available reference is an online link for public access to the questionnaire, offering no clarity on the nature or requirements of the potential subcontract.

POSTED

DEADLINE

Data UnavailableThe contract titled "Data Unavailable" was posted by the State of Rhode Island on July 17, 2026, with a response deadline set for January 20, 2028. It is classified as a subcontract opportunity but lacks critical details such as solicitation number, NAICS code, type of set aside, organization type, and specific scope of work. No information is provided regarding the trades, services, or place of performance, and the office address and point of contact are undefined. The contract link directs to the Rhode Island Department of Administration’s vendor bidding opportunities page, suggesting interested parties must seek additional information externally. Despite the absence of substantive data, the extended timeline indicates a potential long-term procurement process requiring proactive outreach to the agency for clarification.

State of Rhode Island

POSTED

DEADLINE

No subcontract opportunities identifiableThis document is a certification form under the Buy Indian Act, exclusively tied to the Department of Health and Human Services, Indian Health Service, and applies specifically to the Albuquerque Area Indian Health Service. It does not outline any procurement requirements, deliverables, or scope of work, nor does it identify any subcontracting or supplier opportunities. The solicitation is designated as a Buy Indian Set-Aside, which prioritizes Indian-owned businesses under federal guidelines, and is posted with a response deadline of July 24, 2026. No NAICS code, organization type, or point of contact is provided, and while the place of performance is listed with a six-digit code, no city, state, or zip code is specified. The form serves solely as a compliance certification and contains no actionable procurement data.

Albuquerque Area Indian Health Svc

POSTED

DEADLINE

Subcontract opportunity decomposition not possible due to incomplete dataThe subcontract opportunity cannot be decomposed due to insufficient documentation, as the Statement of Work and detailed pricing information are omitted, making it impossible to identify specific supplier or subcontracts roles. The solicitation is managed by the ASC Commodities Division under the Department of Defense, with a posted date of July 16, 2026, and a response deadline of July 24, 2026. The place of performance is designated as Jacksonville, Florida, with a zip code of 32212-0103, though no office address, point of contact, or set-aside details are provided. The NAICS code and organization type are listed as null, further limiting the ability to categorize or target potential bidders. All relevant details for evaluating or preparing a bid are absent, leaving prospective participants with incomplete guidance.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Insufficient Data to Identify Subcontract OpportunitiesThe contract titled "Insufficient Data to Identify Subcontract Opportunities" is issued by the Defense Logistics Agency under the Department of Defense with a posted date of July 15, 2026. It is categorized as a subcontract but lacks essential details such as a statement of work, CLIN breakdown, or any clear scope of work that would allow identification of potential subcontractor or supplier roles. The solicitation number is not provided, and no set-aside type or NAICS code is specified, further limiting the ability to assess eligibility or procurement context. The place of performance and point of contact information are incomplete, and no office address details are available. A continuation sheet containing the full scope of requirements is referenced but remains inaccessible, leaving all key operational and contractual parameters undefined. The only available identifier is a DIBBS link for the award, which does not substitute for the missing documentation needed to proceed with subcontract planning or vendor engagement.

Defense Logistics Agency

POSTED

DEADLINE

No subcontract opportunities identifiedThe Williamson County Purchasing Department has issued a notice indicating no subcontract opportunities are available, serving as an administrative relocation update rather than a solicitation for goods or services. This notice does not include any scope of work, pricing details, or requirements that would enable potential suppliers or subcontractors to respond or engage. The document was posted on July 14, 2026, with a response deadline of August 15, 2026, and is categorized under subcontract type, though no set-aside classification, NAICS code, or organizational details are provided. The agency is identified simply as Wilco within Texas, but no specific office address, place of performance, or point of contact information is included. The only reference for further information is an online link to the BonfireHub platform.

POSTED

DEADLINE

Insufficient Data to Identify Subcontract Opportunities

LAND SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Government of Canada → National Research Council of Canada

Same awarding agency

Ocean Engineering Basin Camera ArrayThe National Research Council Canada is seeking a high-performance camera array system and associated equipment to support real-time model tracking in the Ocean Engineering Basin, with all deliverables required to be completed no later than March 12th, 2027. Only Canadian suppliers and suppliers from applicable trading partners are eligible to submit offers, as this procurement is governed by the Policy on Reciprocal Procurement; submissions from non-trading partner suppliers will be automatically rejected. Selection will be based solely on the lowest price, and all tenders must be submitted electronically to the NRC Bid Receiving Unit before the deadline of August 6th, 2026. Documents may be submitted in either English or French, and Canada reserves the right to negotiate with any supplier following submission. The procurement is managed by Isabelle Fortin of the NRC’s Finance and Procurement Services, who can be contacted for further details, and the contract is open only to suppliers who meet the eligibility criteria outlined under reciprocal trade agreements.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

CNC Tool Room LatheThe National Research Council Canada is soliciting a CNC tool room lathe with full manual machining capabilities to support precision machining, quick setup, and operational flexibility for its Design and Fabrication Service in Ottawa, Ontario. The solicitation, numbered 26-58071, requires delivery and full commissioning of the machine, including on-site installation, laser calibration with ballbar verification, and training for up to five NRC personnel, all to be completed no later than December 31, 2026. The machine must meet stringent technical requirements, including a hardened way system with a minimum hardness of 50 HRC, C3-grade ball screws on all axes, a Siemens CNC controller with manual handwheel operation, a two-speed automatic geared headstock, 5C and 8-inch chucks, Meehanite SP-100 cast iron construction, and compliance with Canadian Electrical Code and CSA/cUL safety standards. Offers are evaluated on a lowest price, technically compliant basis, where all mandatory specifications must be met without exception—failure to satisfy any single technical requirement renders an offer non-compliant regardless of price. Only Canadian suppliers or suppliers from applicable trading partners are eligible under the Policy on Reciprocal Procurement, and submissions must be submitted electronically by July 31, 2026, to the designated bid receiving email. The contract is governed under Incoterms® 2020 DAP at the NRC’s Ottawa facility, with packaging required to be reusable, recyclable, or returnable in alignment with Canada’s Green Procurement Policy, and all shipments must include a detailed packing slip with CRN and BN identifiers. Security requirements are substantial: personnel may require access to PROTECTED or CLASSIFIED information and must undergo appropriate screening as defined in Annex SRCL. The contract includes an irrevocable government option to purchase additional items under the same terms prior to contract expiry, but no extension of the delivery deadline is permitted. Payment is made electronically via direct deposit, EDI, or wire transfer upon submission of compliant invoices bearing financial codes, CRN, and BN, and all submissions must be in one of Canada’s official languages. An organizational conflict of interest certification is mandatory, and any breach may result in offer rejection or contract termination.

Machine Tool Manufacturing

POSTED

DEADLINE

Benchtop X-ray Diffractometer

POSTED

DEADLINE

Integrating Sphere - Question and Answer #4The contract seeks the procurement of two identical integrating spheres along with all necessary supporting components to perform traceable spectroradiometric measurements across the visible-near infrared to shortwave infrared spectrum. The systems must deliver an absolute uniform spectral radiance output that is directly traceable to recognized national metrology standards such as those maintained by the National Research Council of Canada or the National Institute of Standards and Technology in the United States. The equipment must be designed for versatility to accommodate a wide range of environmental lighting conditions, including day, night, cloud-covered, and full sun scenarios, requiring the ability to easily adjust radiance output levels as needed. The solicitation is issued by the National Research Council of Canada under the procurement identifier 26-58044 Q&A #4 with a response deadline of July 23, 2026, and is classified under NAICS code 334519. All communications and inquiries should be directed to Katie Homuth, the primary point of contact. The place of performance is designated as Canada, and while the estimated contract value and detailed pricing information are unavailable due to system retrieval limitations, the project emphasizes metrological accuracy and operational flexibility to support critical sensor calibration and validation tasks under real-world illumination conditions.

Other Measuring and Controlling Device Manufacturing

POSTED

DEADLINE

in about 13 hours

NRC TBIPS A.5 Enterprise Resource Planning (ERP) Technical Analyst, Level 3The National Research Council of Canada (NRC), through its Chief Information Officer Branch, is seeking a part-time Enterprise Resource Planning (ERP) Technical Analyst, Level 3, to provide on-demand support for the transition from the legacy Virtual Store to a new e-Commerce platform. This solicitation, issued under the Task-Based Informatics Professional Services (TBIPS) Supply Arrangement (EN578-170432), Tier 1, is open to qualified suppliers with a contract ceiling of up to $3,750,000, though the anticipated effort is limited to 17 days of work over the one-year contract period from November 1, 2026, to October 31, 2027. Performance is to be conducted remotely within Canada, with no specific location required beyond the country boundary, and the work will be activated as needed rather than on a fixed schedule. All personnel must attain a Reliability Designated Organization Screening status prior to performing under the contract, though offerors are not required to hold clearances at the time of submission. The contract is governed by applicable trade agreements including the Canadian Free Trade Agreement and other international agreements, and is expected to follow a firm-fixed-price structure consistent with TBIPS practices. Proposals must be submitted directly via email to Contracting Authority Shufang Weng by the deadline of July 22, 2026, and may be prepared in either English or French. No line-item pricing, CLINs, or detailed cost breakdowns are provided, as this solicitation leverages pre-negotiated framework pricing under the TBIPS arrangement. There are no stated options, key personnel requirements, or specific technical standards beyond the security screening and functional delivery expectation of ensuring seamless system migration with minimal disruption. The evaluation methodology, packaging requirements, inspection criteria, and detailed contract clauses are not included in the provided documentation, leaving these aspects to be defined in the full procurement package or subsequent task orders.

Computer Systems Design Services

POSTED

DEADLINE

Secure Logistics and Final Delivery

General Freight Trucking, Long-Distance, Truckload

POSTED

DEADLINE

Technical Documentation and Compliance Reporting

Engineering Services

POSTED

DEADLINE

Secure Electronics Manufacturing and Assembly

Other Measuring and Controlling Device Manufacturing

POSTED

DEADLINE

RF Test and Measurement Equipment Design and Integration

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Technical Documentation and User Interface DevelopmentThe contract titled Technical Documentation and User Interface Development seeks a subcontractor to produce comprehensive technical manuals, a graphical user interface, and fully bilingual English/French operational documentation to support user training and ongoing system maintenance. The deliverables must meet high standards of clarity and usability, ensuring that end users across Canada can effectively operate and maintain the associated systems regardless of their primary language. The work requires expertise in technical writing, software interface design, and professional translation services to maintain consistency and accuracy in both official languages. This subcontract is issued by the National Research Council of Canada under the Government of Canada, with a solicitation posted on July 20, 2026, and a response deadline of August 4, 2026. The NAICS code 541830 indicates this falls under the category of other scientific and technical consulting services. The performance location is designated as Canada, and while no specific office address or point of contact is provided, interested parties must submit proposals through the official Canada Buys portal using the provided UI link before the deadline. The contract does not specify a set-aside type, meaning it is open to all qualified vendors.

Media Buying Agencies

POSTED

DEADLINE

High-Precision Sensor and Calibration ServicesThe contract seeks the supply and calibration of high-accuracy temperature sensors, including standard platinum resistance thermometers, capable of sub-millikelvin precision to ensure precise monitoring of environmental chamber stability and thermal uniformity. These sensors are critical for maintaining rigorous temperature control in laboratory and research settings where minute deviations can impact experimental integrity. The work requires comprehensive calibration services traceable to national standards to guarantee measurement accuracy and reliability under controlled conditions. The procurement is issued as a subcontract by the National Research Council of Canada under the NAICS code 541320 for scientific and technical consulting services. Responses are due by August 4, 2026, with the opportunity posted on July 20, 2026, and performance expected to take place within Canada. The contract emphasizes technical capability, calibration documentation, and adherence to ultra-high precision requirements without specifying set-aside provisions or point of contact details, indicating a competitive process open to qualified suppliers meeting stringent metrological standards.

Landscape Architectural Services

POSTED

DEADLINE

CSA Safety Certification and Compliance TestingThe contract seeks third-party safety testing and certification services for an air bath system to ensure compliance with CSA or equivalent Canadian safety standards. The work is classified as a subcontract under NAICS code 541380, indicating specialized scientific and technical services, and is issued by the National Research Council of Canada on behalf of the Government of Canada. All testing must be conducted to meet the stringent regulatory requirements applicable in Canada, with results validated by an accredited certification body. The performance location is within Canada, and the services are critical for regulatory approval and market access of the system. The solicitation was posted on July 20, 2026, and responses are due by August 4, 2026, giving potential vendors approximately two weeks to prepare and submit proposals. The contract does not specify a set-aside classification, suggesting it is open to all qualified entities regardless of business size or status. While no point of contact is listed, interested parties can access further details through the official tender portal linked in the contract data. The successful bidder will be responsible for delivering comprehensive documentation, test reports, and certification evidence to demonstrate full compliance with applicable Canadian safety regulations.

Testing Laboratories and Services

POSTED

DEADLINE