Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

UNIT LOCKER REQUEST

Active
70Z02726QPORT0067Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The United States Coast Guard Station Philadelphia is requesting bids for thirty-six blue gear lockers constructed from 16-gauge steel, each measuring 24 inches wide by 24 inches deep by 72 inches high. Each locker must feature a door with a combination padlock attachment point, an upper shelf with a secure valuables cabinet, a full-length garment bar with hooks, and a footlocker compartment with an additional shelf above it. The lockers are to be delivered unassembled to the specified location in Philadelphia, Pennsylvania, with all components and hardware included for on-site assembly. The solicitation is a total small business set-aside under NAICS code 337215, open only to small businesses as defined by the SBA, and bids must be submitted by the deadline of July 30, 2026. Vendors are expected to provide detailed pricing, delivery timelines, and warranty terms in their proposals. The contract is managed under solicitation number 70Z02726QPORT0067, posted on July 20, 2026, through the SAM.gov platform. Primary point of contact is Alejandro Villarreal, reachable via email or phone, with Joshua Ruppel as the secondary contact. Though the solicitation is issued by the Department of Homeland Security through its Portsmouth office in Virginia, the physical place of performance is exclusively at the Coast Guard Station in Philadelphia, Pennsylvania. All interested suppliers must comply with the specified design, material, and functional requirements and ensure timely delivery to meet operational needs at the station.

General Info

Thirty-six steel lockers with shelves, bars, and lock points to be delivered unassembled to Philadelphia by July 30, 2026, for small businesses only.

Agency

Department Of Homeland Security → Base PORTSMOUTH(00027)View Agency

NAICS

337215 - Showcase, Partition, Shelving, and Locker ManufacturingView NAICS

Place of Performance

PA, 19147, USA

Set-Aside

SBA

Documents

(1)

Gear+Locker+Bid.docx

DOCX

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Homeland Security → Base PORTSMOUTH(00027)
Contacts2 people available
OfficePORTSMOUTH, VA, 23704, USA
Organization / Agency
Department Of Homeland Security → Base PORTSMOUTH(00027)
View Agency Profile
Office AddressPORTSMOUTH, VA, 23704, USA

Full Description

Show more

Subject: Request for Bid – Gear Lockers 


Delivery Location: 
USCG Station Philadelphia 
1 Washington Ave. 
Philadelphia, PA 19147 


Specifications: 
The United States Coast Guard Station Philadelphia is seeking bids for the supply and delivery of thirty-six (36) gear lockers with the following requirements: 


  • Color: Blue 


  • Door: Each locker must include a door with a combination padlock attachment point 


  • Interior Features: 


  • Upper shelf with a secure valuables cabinet 


  • Full-length garment bar with hooks 


  • Footlocker compartment with an additional shelf above 


  • Material: Constructed from 16-gauge steel 


  • Assembly: Lockers to be delivered unassembled 


  • Dimensions: 24 inches wide x 24 inches deep x 72 inches high (W24” x D24” x H72”) 


Interested vendors are requested to submit detailed proposals, including pricing, estimated delivery timelines, and any applicable warranty information. 

Similar Contracts

Same NAICS industry code

NAICS: 337215
New
DIBBS
BOX, ACCESSORIES STOWAGThe contract is for the procurement of 38 units of a box designed for accessories stowage under solicitation SPE7L1-26-Q-1336, with a delivery requirement of 278 days after contract award. The item is identified by NSN 2540-01-087-6987 and is subject to a full and open competition with no set-aside restrictions. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions tied to the solicitation or award date depending on acquisition size. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals must be submitted for approval unless explicitly authorized by specification. The item includes components governed by Qualified Products Lists or Qualified Manufacturers Lists, requiring compliance with procurement note H02. The contract enforces strict cybersecurity requirements mandating CMMC Level 2 compliance, either through self-assessment or certification by a third-party assessment organization. Technical data associated with the item is subject to export controls under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign nationals within the U.S., and requires strict adherence to DFARS 252.225-7048. Access to controlled technical data is restricted to contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have received formal approval from DLA. Additional requirements include proper physical identification and bare item marking, configuration change management via formal engineering change proposals, and removal of government identification from non-accepted supplies. The place of performance is New Cumberland, Pennsylvania, and inquiries should be directed to Matthew Lepak at the provided contact information.
LAND SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

in 14 days
View Details
NAICS: 337215
New
Federal
DDSP Tool CabinetsThe U.S. Department of Defense, through DLA Distribution Susquehanna in New Cumberland, Pennsylvania, is soliciting quotes for Storage Cabinets under RFQ SP330026Q0185, with a firm-fixed-price structure to be executed via SF 1449. The procurement is exclusively reserved for small businesses as a total small business set-aside under FAR 19.5, and the North American Industry Classification System code is 337215, indicating furniture and related product manufacturing. All responses must be submitted by 5:00 PM Eastern Time on July 22, 2026, with the solicitation posted on July 17, 2026. The contract will result in a single award, and the delivery location for the cabinets is the DLA Distribution Susquehanna facility at 17070-5002, Pennsylvania. This acquisition is not subject to the Defense Priorities and Allocations System. The primary point of contact for inquiries is Samuel Tustin, reachable via email at samuel.tustin@dla.mil. The procurement is being managed by the Office of DLA Distribution, and all work must be performed at the specified location in New Cumberland, Pennsylvania. No DPAS rating applies, meaning standard commercial practices govern priority and delivery expectations. Interested vendors should submit proposals prior to the deadline and ensure compliance with small business certification requirements. Further details and the official solicitation can be accessed through the SAM.gov workspace link provided.
DLA Distribution

POSTED

about 18 hours ago

DEADLINE

in 3 days
View Details
NAICS: 337215
New
DIBBS
Free-Standing Fabric Partition Supply (6'8" x 9'5")The contract entails the supply of four commercial off-the-shelf free-standing fabric partitions, each measuring 6 feet 8 inches by 9 feet 5 inches, to be delivered with military-compliant packaging and labeling standards. These partitions are intended for use within Department of Defense facilities and must meet all applicable federal and military logistics requirements for handling, storage, and transport. The procurement is managed under a subcontract arrangement by the Defense Logistics Agency, operating under the NAICS code 337215 which corresponds to the manufacturing of institutional furniture and fixtures. Delivery is to be executed in accordance with military protocols, ensuring full traceability and compliance with defense supply chain regulations. The contract was posted on July 17, 2026, and is associated with the DLA BSM system under contract number SPE8EZ21D0006 and delivery order SPE8EN26F3248. No specific place of performance or point of contact is listed, but work is expected to support Defense Department operations across unspecified locations. The requirement does not involve a set-aside designation and is open to qualified subcontractors capable of fulfilling the specified technical and logistical constraints. All units must arrive ready for immediate deployment without the need for additional assembly or customization, adhering strictly to military packaging and labeling standards to ensure interoperability and accountability within DoD inventory systems.
Defense Logistics Agency

POSTED

4 days ago

DEADLINE

N/A
View Details
NAICS: 337215
New
Federal
7125--Antimicrobial Shelving UnitsThis procurement is a combined synopsis/solicitation issued as a Request for Quotation (RFQ) under FAR Part 12, utilizing simplified acquisition procedures, and is designated as a 100% small business set-aside under NAICS code 337215. The Department of Veterans Affairs seeks to acquire and install forty-one new antimicrobial shelving units for walk-in freezers and refrigerators at the Overton Brooks VA Medical Center in Shreveport, Louisiana, replacing existing units at end-of-life. The project requires full removal and proper disposal of the old shelving, installation of the new units, and complete removal of all packing materials from the facility. Specific technical requirements include eight units of antimicrobial aluminum at 74 inches high, ten units at 69 inches high, twelve stainless steel units at 74 inches high, and eleven at 69 inches high, all featuring louvered shelves, donut bumpers, fall arresting bars, adjustable heights and feet, four 5-inch casters (two swivel, two with brakes), and horizontal plastic label holder clips with clear covers. All work must be conducted during business hours, and delivery and installation must be completed no later than thirty days after receipt of order. The solicitation incorporates a variety of FAR and VAAR clauses, including deviations for the nonmanufacturer rule, System for Award Management registration, and contract terms for commercial items, alongside mandatory compliance with Buy American requirements, HSPD-12 personal identity verification, and statutory obligations under federal labor, anti-kickback, and procurement integrity laws. Responses must be submitted electronically via email to Marcus Sidney at marcus.sidney@va.gov no later than 8:00 a.m. Central Time on July 22nd, 2026, with all inquiries due by July 17th, 2026. Proposals must be organized into three volumes: Price (including a signed SF-1449 and active SAM registration), Past Performance History (demonstrating satisfactory record under FAR 9.104-1(c)), and Technical Capabilities (detailing how the offered shelving meets or exceeds all SOW specifications, including salient characteristics). Awards will be made on a lowest price technically acceptable basis to a sole successful offeror whose proposal satisfies all technical and compliance requirements, with no price negotiations or clarifications permitted. The government retains the right to inspect and reject nonconforming items, requiring repair, replacement
256-NETWORK Contract Office 16 (36C256)

POSTED

4 days ago

DEADLINE

in 1 day
View Details

More opportunities from Department Of Homeland Security → Base PORTSMOUTH(00027)

Same awarding agency

NAICS: 333415
New
Federal
USCG Base Portsmouth Command & Administration Building Chiller Unit Removal and ReplacementThe contractor is responsible for the complete removal and replacement of a 60-ton Carrier AquaSnap chiller unit serving the Medical, Command, and Administration buildings at USCG Base Portsmouth. This includes all labor, materials, equipment, transportation, and supervision required to safely disconnect, decommission, and remove the existing unit, followed by the furnishing, installation, integration, and commissioning of a new chiller unit with equivalent or greater capacity that is fully compatible with the existing systems. All work must be performed in compliance with safety and operational standards to ensure minimal disruption to facility functions. Interested parties must conduct a mandatory site visit on July 28, 2026, at 10:00 Eastern Time at 4000 Coast Guard Blvd, Portsmouth, VA 23703, to verify all quantities and conditions firsthand. Access to the base requires prior coordination with Frank Burton and Nate Chappell via email, along with presentation of a valid REAL ID Driver’s License, full legal name, and date of birth. The solicitation, numbered 70Z02726QPORT0674, was posted on July 20, 2026, with proposals due by August 4, 2026, at 16:00 Eastern Time. This procurement is a Total Small Business Set-Aside under NAICS code 333415, administered by the Department of Homeland Security through USCG Base Portsmouth.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333415
New
Federal
Provide HVAC Motorized Valve and DOAS Repairs at USCG SMTC BarracksThis procurement is a total small business set-aside under NAICS code 333415 for plumbing, heating, and air-conditioning contractors, with a size standard of 1,250 employees, aimed at securing repairs to HVAC motorized valves and DOAS systems at the USCG SMTC Barracks in Chesapeake, Virginia. The contract will be awarded as a firm-fixed-price order, with all work requiring full labor, materials, and equipment to meet the specifications outlined in the Statement of Work. Quotes must be submitted via SF-18 by 5:00 PM Eastern Time on July 16, 2026, to the designated email addresses, and no oral inquiries are permitted—所有 questions must be submitted in writing to the Contracting Officer or Contract Specialist. A site visit is strongly encouraged and will occur on July 21, 2026, at 10:00 AM at the barracks, with advance coordination required through Nate Chappell and Hayden Heyer. All visitors must complete a security access form and present a valid Real ID or passport, along with full name, date of birth, and the last four digits of their Social Security Number; those with a Military ID or RAPIDGate pass are exempt from the access form. There is no incumbent contractor for this effort, and the solicitation number is 31040RFQ260000704, issued by the Department of Homeland Security, Base Portsmouth.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

5 days ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
Federal
QTY 160 135lb Dor Mor Pyramid Mooring AnchorsThe United States Coast Guard Base Portsmouth plans to award a sole-source purchase order to DOR MOR, INC. for 160 units of 135lb pyramid-shaped cast iron mooring anchors, as the design and specifications are proprietary and uniquely held by the manufacturer. These anchors are engineered as one-piece permanent solutions with a short shank and a large-diameter eye, designed for rapid seabed penetration in both fresh and saltwater environments, and are critical to the Coast Guard’s mooring infrastructure needs. The procurement is authorized under FAR 12.102(a) due to the absence of other qualified sources, and while the anticipated NAICS code is 332510 with a 750-employee small business size standard and the PSC code is 2040, both may be updated prior to award. This notice is not a competitive solicitation, but an opportunity for other potential vendors to submit a capability statement by July 30, 2026, at 12:00pm Eastern Time, solely to inform the government’s decision on whether to open the requirement to competition. Responses must be emailed to Jackson Wysor and Frank Burton at the designated government addresses, and any costs associated with submission are borne by the respondent. The government retains full discretion to proceed with the sole-source award regardless of responses received. The contract action is tied to solicitation number 71105QPR260000267, with performance expected at Portsmouth, Virginia, and all inquiries must be received before the deadline to be considered.
Hardware Manufacturing

POSTED

5 days ago

DEADLINE

in 9 days
View Details