This Government Contract opportunity from Department Of Defense was posted on September 2, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Universal Splint Manufacturer

Closed

Federal

Submission Closed09/08/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 339113

New

DIBBS

Phaco Titanium Easy Tip Co-Mics SupplyThis subcontract involves the supply of sterile, single-use Phaco Titanium Easy Tip Co-Mics for prime contractors supporting Department of Defense Medical Supply Chain projects. The required components are 2.2mm diameter tips with a 30-degree angle designed for 1.6mm to 1.8mm incisions, and each kit must include irrigation sleeves, test chambers, and phaco or emergency keys. All products must strictly adhere to Medical Marking Standard No. 1 and MIL-STD-2073-1E packaging requirements. The contract is managed under NAICS code 339113 for the Medical Supply Chain MD Surg FSF. Final delivery of the sterile kits is designated for the Kelly CSDC AFMEDCOM located in San Antonio, Texas. The solicitation was posted on October 7, 2026, with a response deadline of October 13, 2026.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Wearable War Wound Simulation GarmentsThis subcontract involves the manufacture and supply of ten wearable three-dimensional simulation wounds integrated into short-sleeve shirts for the Department of Defense Medical Supply Chain. The deliverables specifically include sucking chest wound and exit back simulations featuring medium skin tone finishing and medical-grade polymers to ensure realistic tactile feedback. These items are identified by NSN 6910-01-694-7005 and are intended for use by prime contractors on DLA Troop Support projects. The project is categorized under NAICS code 339113 and requires strict adherence to MIL-STD-2073-1E and MIL-STD-129 packaging standards. Performance for this contract is centered at Wright Patterson AFB. The solicitation was posted on October 7, 2026, with a response deadline of October 14, 2026.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Sterile Vitrectomy Surgical Tubing System SupplierThis subcontract opportunity is for a supplier to provide sterile, single-use irrigation and aspiration tubing systems to prime contractors supporting Department of Defense Medical Supply Chain projects. The scope of work involves the manufacture or distribution of tubing kits, including infusion sets, draining bags, and protection bags, specifically designed for compatibility with Swisstech, Carathex 3, and Faros equipment. All products must be produced in a cleanroom environment and undergo sterilization to meet strict medical standards. The supplier must ensure full adherence to MIL-STD-2073-1E and Medical Marking Standard No. 1. Performance for this contract is centered in San Antonio, Texas, under NAICS code 339113. Interested parties should note the response deadline of October 13, 2026, for this medical supply requirement managed by the DLA Troop Support Medical Supply Chain.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Supply of Light Lenses (NSN 6210-01-204-0535)This subcontract involves the manufacture or procurement of 46,000 precision light lenses, identified as NSN 6210-01-204-0535, for the DLA Weapons Support ASC Commodities Division. The lenses must strictly adhere to Safran Electronics and Defense Avionics Part Number 167551-019 specifications and are prohibited from containing any mercury-based compounds. All units are to be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Quality assurance is a critical component of the agreement, requiring full compliance with RQ017 marking standards and the implementation of zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. The project falls under NAICS code 339113 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Vascular PTFE Graft ManufacturingThis subcontract involves the manufacture and supply of four vascular PTFE grafts, specifically NSN 6515-01-295-3438, for prime contractors supporting Department of Defense medical supply contracts. The required products are arterial and venous prostheses featuring a nonwoven polytetrafluoroethylene plastic core, measuring 8 mm in diameter and 80 cm in length with a straight configuration and round tips. To qualify, the manufacturer must utilize cleanroom facilities and maintain strict compliance with the Buy American Act and NIST SP 800-171 standards. The performance of this contract is centered in Pascagoula, Mississippi, under NAICS code 339113, with a response deadline set for October 13, 2026.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Nonmetallic Hose Assembly ManufacturingThis subcontract involves the manufacture or procurement of 2,000 nonmetallic hose assemblies for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The required items must adhere to NSN 4720-01-437-3637 and P/N 8130007-3, with strict compliance required for Critical Application Item standards. Packaging and marking must be executed in accordance with ASTM D3951 and MIL-STD-129. The project falls under NAICS code 339113 and is managed by the Department of Defense. Performance of the contract will take place in New Cumberland, Pennsylvania. Interested parties must note the response deadline of October 19, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

NIOSH N95 Personal Protection Kit SupplierThis subcontract involves the supply of certified personal protection kits for prime contractors supporting Department of Defense projects under the DLA Troop Support Medical Supply Chain. The contractor is required to provide kits that meet NIOSH N95 standards, packaged in vacuum-sealed, rugged materials according to ASTM D3951 and Medical Marking Standard No. 1. Strict adherence to the Buy American Act and the Berry Amendment is mandatory for all supplied materials. The specific scope of work requires the delivery of eight units of NSN 6515-01-537-1534 to the USS John Basilone JR DDG 122. This procurement falls under NAICS code 339113 and is managed by the Medical Supply Chain MD SURG FSF.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Supplier of Oxygen Tubing Connectors (NSN 6515-01-702-4284)This subcontract involves the supply of 15 green oxygen tubing swivel barb nipple nut connectors, identified by NSN 6515-01-702-4284, for prime contractors supporting the Department of Defense Medical Supply Chain. The components must adhere to precise dimensions of 2.0 inches in length, 1.1 inches in height, and 1.0 inch in width, in accordance with Medical Marking Standard No. 1. The supplier is required to ensure delivery within two months of manufacture on a FOB Destination basis to JBER. Compliance with MIL-STD-2073-1E, RP001, and the Buy American Act is mandatory for this procurement under NAICS code 339113.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Ankle Brace ManufacturingThis subcontract involves the manufacturing of dynamic ankle stabilizers for prime contractors supporting the Department of Defense Medical Supply Chain. The contractor is responsible for fabricating ankle braces using a specific blend of materials, including thermoplastic polyurethane, neoprene, lycra, nylon, zinc, nickel, and leather. All finished products must be latex-free, adhere to Medical Marking Standard No. 1, and be delivered in commercial sealed unit containers under NSN 6515-01-699-6797. Strict adherence to the Berry Amendment and the Buy American Act is required for this project. The performance of the contract is centered in APO 09227, falling under NAICS code 339113. Interested parties must note the response deadline of October 13, 2026, for this Department of Defense requirement.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Sterile Kitting and Packaging ServicesThis subcontract for Sterile Kitting and Packaging Services supports DLA Troop Support Medical Supply Chain projects for the Department of Defense. The scope of work involves the assembly of white pads, high absorbency pads, secondary dressings, and application bars within a cleanroom environment. The contractor is responsible for sterile sealing and applying markings in accordance with Medical Marking Standard No. 1 and MIL-STD-2073-1E to produce completed Bandage Kits. Key operational requirements include managing shelf life to guarantee a total duration of 60 months. The work is performed at Fort Bragg under NAICS code 339113. Interested parties should note the response deadline of October 13, 2026.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Supply of Sterile Abdominal Wound Dressing ComponentsThis subcontract involves the manufacture and supply of sterile medical components for prime contractors supporting Department of Defense projects under the DLA Troop Support Medical Supply Chain. The scope of work includes the production of high-absorbency pads, 12 by 12 inch white pads, extra-wide secondary dressings, and application bars, all utilizing medical-grade sterile absorbent materials and elastic fabrics. Performance for this contract takes place in Fort Bragg and requires strict adherence to domestic sourcing mandates, specifically the Berry Amendment and the Buy American Act. The selected provider will be responsible for delivering bulk quantities of these sterile wound dressing components to meet agency requirements.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Solicitation # SPE8E6-27-T-0167

Solicitation SPE8E6-27-T-0167 is a Request for Quotations issued by the Defense Logistics Agency for the procurement of 195 Sizing Tools, identified by NSN 4240-01-532-7952. The contract is managed under NAICS code 339113 and requires delivery to the DLA Distribution New Cumberland Facility within 192 days after order. Shipping is designated as FOB Origin, while inspection and acceptance are required at the destination per FAR 52.246-2. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system. The contract mandates strict adherence to quality and security standards, including CMMC Level 2 certification and the safeguarding of Covered Defense Information. Technical data is subject to export controls under ITAR or EAR, requiring approved JCP certification for access. Quality compliance must be documented via a Certificate of Quality Compliance submitted through the iRAPT system, with manufacturing systems meeting SAE AS9003 or ISO 9001 standards. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, and the Buy American Act applies to all quotes exceeding the micro-purchase threshold. Quotations are due by October 19, 2026, via the DIBBS portal.

DDSP NEW CUMBERLAND FACILITY

POSTED

1 day ago

DEADLINE

in 11 days

AI Contract Overview

This subcontract involves the manufacture and supply of complete Universal Splints for prime contractors supporting Department of Defense supply contracts through the Medical Supply Chain MD Surg FSF. The manufacturer is responsible for fabricating splints using 1145-0 alloy tempered radiolucent aluminum integrated with radiolucent foam padding. All products must strictly adhere to NSN 6515014941951 specifications, maintaining a final product weight of 4.5 oz and a thickness tolerance of 0.016 inches plus or minus .001. The contract falls under NAICS code 339113 and specifies Fort Bliss, Texas, as the place of performance. Interested parties must respond by September 8, 2026, following the solicitation posted on September 2, 2026. The primary objective is the delivery of finished Universal Splints that meet all technical and material requirements for DLA supply chain distribution.

General Info

Manufacture and supply Universal Splints for DoD per NSN 6515014941951 at Fort Bliss.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

NAICS

339113 - Surgical Appliance and Supplies Manufacturing

Place of Performance

FORT BLISS, TX, 79918-0000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE2DS-26-T-398B.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SPLINT, UNIVERSAL

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedSep 2

subcontract

Response DeadlineSep 8

Deadline has passed

Submission Closed

09/08/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Office AddressN/A

ContactsNo contact information available

Full Description

Manufactures and supplies complete Universal Splints for prime contractors delivering DLA supply contracts. Fabricates splints using 1145-0 alloy tempered (dead soft) radiolucent aluminum and integrates radiolucent foam padding. Maintains thickness tolerances of 0.016 in (± .001) and a final product weight of 4.5 oz. Must meet NSN 6515014941951 specifications. Delivers finished Universal Splints.