Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

Unscheduled Assessments and Emergency Repairs

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract obligates the contractor to respond immediately to critical failures within the VHP system by providing on-site diagnostics, emergency repairs, and full operational restoration under urgent conditions. The work is focused exclusively on unscheduled assessments and emergency intervention, requiring rapid deployment and technical expertise to minimize system downtime in high-stakes environments. The performance location is designated as Dugway, Utah, with the work to be carried out in proximity to the Department of Defense facility operating under the agency name W6QM Micc-dugway Prov Grd. The contract is classified as a subcontract under NAICS code 811210, indicating it falls within the equipment and repair services sector, and was posted on May 11, 2026, though no solicitation number or set-aside details are provided. All response activities must be conducted with precision and speed to ensure mission continuity, with no pre-planned schedule — service must be triggered solely by system failure events requiring emergency action.

General Info

Emergency on-site diagnostics and repairs for Vaporized Hydrogen Peroxide systems at Dugway, DoD contract.

Agency

Department Of Defense → W6QM Micc-dugway Prov GrdView Agency

NAICS

811210 - Electronic and Precision Equipment Repair and MaintenanceView NAICS

Place of Performance

Dugway, UT, 84022, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QM Micc-dugway Prov Grd
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → W6QM Micc-dugway Prov Grd
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Respond to system failures with on-site diagnostics, repairs, and restoration of VHP system operations under emergency conditions.

Similar Contracts

Same NAICS industry code

NAICS: 811210
New
SLED
Repair and Maintenance of Equipment used for High-Volume Mycobacteria Growth, Detection and Susceptibility Testing at the Texas Department of State Health Services (DSHS) South Texas Laboratory
Solicitation # HHS0017743
The Texas Health and Human Services Commission, through its Procurement and Contracting Services division, is soliciting competitive bids to establish one or more contracts for the repair and maintenance of specialized equipment used for high-volume mycobacteria growth, detection, and susceptibility testing at the Texas Department of State Health Services South Texas Laboratory. Both the HHSC and DSHS are authorized to utilize any contract awarded under this solicitation, ensuring statewide access to critical diagnostic support services. The solicitation, identified as HHS0017743, was posted on August 5, 2026, with responses due by August 19, 2026, at 4:30 PM Central Time. The work will be performed in Texas, and all bids must meet the technical and operational requirements necessary to sustain the laboratory’s high-throughput testing capabilities. Point of contact for inquiries is David Martinez, reachable at 512-406-2597 or David.Martinez01@hhs.texas.gov.
Department of State Health Services

POSTED

about 10 hours ago

DEADLINE

in 14 days
View Details
NAICS: 811210
New
Federal
49--CABLE ASSY TORPEDO,, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QPC34
The contract solicitation is for a flight-critical cable assembly used in torpedo repair and modification, identified by NSN 7R-4920-015824377-HT, with a quantity of six units to be delivered FOB origin. This item requires exclusive sourcing from previously government-approved suppliers due to proprietary engineering designs, specialized manufacturing and repair capabilities, and technical data that are not economically available to the government. Only sources already validated by the design control activity have been solicited, as alternative suppliers cannot be qualified within the required timeframe without compromising mission readiness. Proposals from non-approved sources must include comprehensive documentation as outlined in the NAVSUP Weapon Systems Support Source Approval Information Brochures, detailing experience with identical or similar items or proof of prior submission for approval. Incomplete submissions will be rejected outright, and award may proceed based on Fleet support needs if source approval cannot be finalized in time. The government has determined this requirement does not fall under FAR Part 12 commercial item acquisition policies, but offers are open for commercial item alternatives if submitted within 15 days. Technical documentation referenced for compliance is accessible through ASSIST-Online or the DODSSP, though drawings, patterns, and deviation lists are not available via these channels. All proposals must be submitted by the response deadline of September 21, 2026, with primary point of contact being Christopher Campellone of NAVSUP Weapon Systems Support in Philadelphia, Pennsylvania.
Navsup Weapon Systems Support

POSTED

about 13 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 811210
New
Federal
HFP Multifunctional Device (MFD) Support and
Solicitation # OMASITHFPMFD01
The FDA Human Foods Program is soliciting a contractor to provide on-site maintenance and support for Konica Minolta Bizhub “4” and “8” model multifunctional devices, as well as new Bizhub “0” model MFDs, across six of its building locations in Maryland. This requirement stems from a prior reduction in coverage under a one-year contract awarded in 2025 due to budget constraints, and now seeks to reinstate comprehensive service with a base contract and one optional year. The MFDs are critical to high-volume office operations, handling substantial volumes of photocopying, printing, and scanning tasks across various document types. Only an original equipment manufacturer authorized service provider using genuine Konica Minolta parts and employing certified, trained technicians on OEM hardware will be considered. The contract requires strict adherence to manufacturer specifications to ensure reliability and performance under heavy usage. The solicitation, numbered OMASITHFPMFD01, was posted on August 5, 2026, with a response deadline of August 14, 2026, and is managed by the Omas Strategic Buying Center – Information Technology under the Department of Health and Human Services. The contract will cover 44 MFDs located at sites in Maryland, with performance centered at 17776, Rockville, MD 20740. The NAICS code for the opportunity is 811210, indicating office administrative services, and no small business set-aside is applicable. Primary point of contact for inquiries is Raja Seshadri, reachable by phone or email, with Laura Grey as the secondary contact. The contract must be awarded through a full and open competition and all service providers must demonstrate valid OEM authorization and proven technical certification for Konica Minolta equipment.
Omas Strategic Buying Center - Information Technology

POSTED

about 13 hours ago

DEADLINE

in 9 days
View Details
NAICS: 811210
New
Federal
61--POWER SUPPLY, IN REPAIR/MODIFICATION OF
Solicitation # N0010426QUC20
The contract pertains to a single unit of a power supply identified by NSN 7H-6130-015469882 and NIIN 7H-6130-015469882, with the part number 4801682, intended for repair or modification purposes. The item must be delivered to W62G2T, W1A8 DLA DIST SAN JOAQUIN in Tracy, California, with a delivery requirement for one unit. The Government does not hold the intellectual property rights or technical data necessary to procure or repair the part from alternative sources, and it has been deemed uneconomical to acquire such rights or to reverse engineer the component. This contract is being executed under FAR 6.302-1, limiting it to a single source due to the unique nature of the part and lack of data. Although the notice invites interested parties to submit proposals or capability statements within 45 days—30 days if awarded under an existing Basic Ordering Agreement—it is not a competitive solicitation. Any award will depend on the offeror, product, or manufacturer meeting all qualification criteria at the time of award, as stipulated in FAR clause 52.209-1. The Government has determined that commercial item acquisition policies under FAR Part 12 do not apply, but vendors may still propose commercial alternatives within 15 days of this notice. Technical documentation such as specifications and standards can be accessed through ASSIST-Online or DODSSP, though design files, drawings, and deviation lists are not available through these channels. The contracting office is located in Mechanicsburg, Pennsylvania, under the Naval Supply Systems Command Weapon Systems Support, with Leigh E. Catchings as the primary point of contact.
Navsup Weapon Systems Support Mech

POSTED

about 13 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 811210
New
Federal
70--REMOVABLE STORAGE (, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QMB08
The contract solicitation NSN 7R-7025-016207802-E7, referenced under NR 2869920-010, seeks 30 units of removable storage equipment intended for repair or modification purposes. The requirement is issued under solicitation number N0038326QMB08 by the Naval Supply Systems Command Weapon Systems Support, a component of the Department of Defense, with the office located in Philadelphia, Pennsylvania. Delivery is specified as FOB origin, meaning the seller is responsible for loading the items at their facility and the buyer assumes all costs and risks from that point forward. The solicitation was posted on August 5, 2026, with responses due by September 21, 2026, at 4:00 a.m. Eastern Time. This is classified as a presolicitation, indicating it is for informational purposes prior to formal bidding. There is no set-aside designation specified, and the NAICS code is not provided. Primary point of contact for inquiries is Peter A. Kobryn, reachable via email at PETER.A.KOBRYN.CIV@US.NAVY.MIL or by phone at (215) 697-4313.
Navsup Weapon Systems Support

POSTED

about 13 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 811210
New
Federal
59--CIRCUIT CARD ASSEMB, IN REPAIR/MODIFICATION OF
Solicitation # N0010425QDE08
This contract solicitation from the Department of Defense, specifically NAVSUP Weapon Systems Support Mech, concerns the repair and modification of a circuit card assembly, identified by the Cage Code 072E5 and reference number 1715296-101. The contract outlines strict repair and quality standards, requiring all work to comply with the contractor’s approved repair practices, MIL-STD-130 marking, and adherence to original manufacturer's specifications. The Government requires a Repair Turnaround Time (RTAT) of 67 days, with Government Source Inspection mandatory, and all freight terms are FOB Origin with freight managed via the Navy’s Commercial Asset Visibility (CAV) system. The contractor must report all receipts and inspections accurately within specified timeframes and has to accommodate potential teardown and evaluation fees if the asset is deemed beyond repair. The award will be firm-fixed-price or negotiated not-to-exceed terms, with specific clauses addressing substitutions or design changes under strict Government approval. The contract includes comprehensive documentation requirements, citing a series of military standards and specifications available through the Department of Defense Single Stock Point or other government channels, with guidelines on handling classified and distribution-restricted materials. Amendments have extended the offer due date multiple times, currently set at January 9, 2026, and have adjusted quantities slightly. The solicitation stresses the importance for offerors to provide detailed quotes including pricing and RTAT, along with all relevant administrative data like Return Material Authorization numbers and delivery vehicles. All terms emphasize rigorous quality assurance, packaging, and marking protocols, with a complete trail of inspection records required for one year following final delivery. The contracting officer and primary point of contact for this solicitation is Sarah Haley, reachable via provided contact details.
Navsup Weapon Systems Support Mech

POSTED

about 13 hours ago

DEADLINE

in 29 days
View Details
NAICS: 811210
New
Federal
59--COUPLER,ANTENNA, IN REPAIR/MODIFICATION OF
Solicitation # N0038326RLA95
The contract solicitation NSN 7R-5985-014876120-QF pertains to the repair or modification of a 59-COUPLED ANTENNA, with a quantity of five units required and delivery terms specified as FOB origin. The solicitation, identified by number N0038326RLA95, was posted on August 5, 2026, and responses are due by September 21, 2026, at 4:00 AM. It is classified as a presolicitation, indicating it is an early-stage notice to gauge industry interest prior to formal procurement. The contracting activity falls under the Navsup Weapon Systems Support office within the Department of Defense, located in Philadelphia, Pennsylvania, with no set-aside designation applied. The place of performance is unspecified, and the sole point of contact is Tia Johnson, reachable via email at TIA.JOHNSON.CIV@US.NAVY.MIL or by phone at (215) 697-5271, with fax number (215) 697-0189 provided for administrative correspondence. All contract-related information and submissions must be processed through the official SAM.gov portal linked in the posting.
Navsup Weapon Systems Support

POSTED

about 13 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 811210
New
Federal
J066--Eye Laser & Cryostat Service Agreement POP: 9/1/2026-8/31/2031
Solicitation # 36C25926Q0646_0001
This contract is a firm-fixed price Indefinite-Delivery Indefinite-Quantity (IDIQ) agreement for Eye Laser and Cryostat Service and Support, issued as a Request for Quote (RFQ) by the Department of Veterans Affairs Network Contracting Office 19 in support of the Montana VA Health Care System. The period of performance spans five years from September 1, 2026, to August 31, 2031, with options to extend services for up to an additional six months. Services are to be performed at VA facilities in Fort Harrison and Billings, Montana, and include preventive and corrective maintenance for Alcon Centurian Vision lasers, Lumenis Selecta Trio lasers, and Leica CM1860 cryostats, with each line item covering a one-year base period and multiple option years. The contract is a total small business set-aside exclusively for certified Service-Disabled Veteran-Owned Small Businesses (SDVOSBs), requiring full compliance with SBA regulations and VA-specific limitations on subcontracting. Offerors must submit a four-volume proposal detailing capability, price, past performance, and subcontracting compliance, with pricing provided via Attachment 1 and certifications via Attachments 2 and 3. The evaluation follows a best-value approach, prioritizing price reasonableness, responsibility, capability to meet the Statement of Work, and satisfactory past performance, with the lowest-priced responsible offeror favored if all pass/fail gates are cleared. The contract imposes extensive operational, security, and compliance requirements. All contractor personnel must undergo background investigations per VA Directive 0710 and comply with VAAR 852.204-72 personnel vetting provisions. Cybersecurity obligations include adherence to Executive Order 14028 and NIST guidelines, with mandatory self-attestation and inclusion of IT security clauses such as VAAR 852.239-71 and 852.239-75. Technical services must conform to industry standards from AAMI, ANSI, FDA, CDC, ISO, OSHA, TJC, and VHA directives, with performance measured against strict quality benchmarks: 100% conformance to SOW and OEM specifications, 95% equipment up-time, 90% response to service requests within two business hours, and satisfactory staffing qualifications. Invoicing must be submitted electronically through designated VA portals monthly in arrears, and payments will be processed by the
Network Contract Office 19 (36C259)

POSTED

about 13 hours ago

DEADLINE

in 13 days
View Details
NAICS: 811210
New
Federal
16--GPP MODULE, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QMB14
The Government intends to award a sole-source contract for 13 GPP Modules, part number 3151721-301, under NSN 7R-1680-016040853-QF, with delivery terms FOB origin, to either the original equipment manufacturer or a non-prime source, based on the authority of FAR 6.302-1. This action is not a competitive solicitation, but interested parties may submit proposals, quotations, or capability statements within 45 days of the notice publication, or 30 days if an existing Basic Ordering Agreement applies, to demonstrate their ability to meet the requirement. The Naval Supply Systems Command Weapon Systems Support in Philadelphia, Pennsylvania, is the procuring activity, and the contract will be used to support the repair or modification of equipment identified by the title "16--GPP MODULE, IN REPAIR/MODIFICATION OF." The solicitation number is N0038326QMB14, with a response deadline of September 21, 2026, and all submissions will be evaluated solely to determine whether a competitive procurement is warranted. The Government reserves the right to proceed without competition based on the responses received or lack thereof, and failure to respond will be interpreted as non-interest. Point of contact for inquiries is Stacey Ryan, available via email and phone provided.
Navsup Weapon Systems Support

POSTED

about 13 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 811210
New
Federal
J066--PM&S Hamilton SAM HD
Solicitation # 36C24126Q0720
The Department of Veterans Affairs intends to award a sole source contract to Hamilton Storage Technologies, Inc. for preventative maintenance and service of existing laboratory equipment, specifically the SAM HD system at the VAMC Boston, Jamaica Plain Campus. This action is justified under FAR 6.302.1-1 due to the proprietary nature of the equipment, which requires specialized parts and technical expertise only available from the original manufacturer. No competitive solicitation will be issued, as no other supplier can meet the agency’s technical requirements. The contract will cover all necessary labor and proprietary components to ensure continued operation of the equipment. The NAICS code is 811210 with a size standard of $34.0 million, and the PSC/FSC is J066. Interested parties may direct inquiries to Contract Specialist Shannon Haberern via email at shannon.haberern@va.gov. Responses to this notice are requested by August 10, 2026, at 6:00 PM EST, though the Contracting Officer retains full discretion to proceed with sole source award regardless of public feedback.
241-NETWORK Contract Office 01 (36C241)

POSTED

about 13 hours ago

DEADLINE

in 5 days
View Details
NAICS: 811210
New
Federal
Intuitive Da Vinci Mtn Srv
Solicitation # PANDHA-26-P-0000-043682
The contract titled Intuitive Da Vinci Mtn Srv is a pre-solicitation notice issued by the Defense Health Agency under the Department of Defense, with the solicitation number PANDHA-26-P-0000-043682, posted on August 5, 2026. It is designated for maintenance services related to the Intuitive Da Vinci surgical system and has no set-aside classification, meaning it is open to all eligible contractors. The North American Industry Classification System code 811210 applies, indicating the service falls under medical and dental equipment and supplies repair and maintenance. Responses are due by August 11, 2026, at 10:00 AM Eastern Time. The primary point of contact is Bouaphet Phanvongsa, reachable at bouaphet.phanvongsa2.civ@health.mil, with Hyun Townsley as the secondary contact. The contract office is located in Frederick, Maryland, while the performance location is in Landstuhl, Rhineland-Palatinate, Germany, with a zip code of 09180. Further details are available through the provided SAM.gov link.
Defense Health Agency

POSTED

about 13 hours ago

DEADLINE

in 5 days
View Details
NAICS: 811210
New
Federal
59--COUPLER,ANTENNA, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QLA99
The contract pertains to a flight-critical antenna coupler item identified by NSN 7R-5985-014876188-QF, with a quantity of four units to be delivered FOB origin. The Government has determined that full and open competition is not feasible, and the item may only be procured from previously approved sources due to unique design capabilities, proprietary manufacturing and repair knowledge, and insufficient technical data to support alternative sourcing. Engineering source approval by the design control activity is mandatory, and only sources previously vetted and approved by the Government have been solicited. Any entity not already approved must submit comprehensive qualification data in accordance with NAVSUP Weapon Systems Support Source Approval Information Brochures, and failure to provide complete documentation will disqualify the proposal. The item is essential to fleet readiness, and award may proceed even if source approval requests are pending, based on operational necessity. The procurement is conducted under FAR 6.302-1 as a sole-source action, though interested parties may submit proposals within 45 days, with a deadline of September 21, 2026. All award decisions are subject to compliance with FAR clause 52.209-1 and the requirement that offerors, products, or manufacturers meet all qualification standards at the time of award. This acquisition is subject to applicable Free Trade Agreements and the World Trade Organization Government Procurement Agreement, as governed by DFARS clauses 252.225-7036 and 252.225-7021, which may impact origin and pricing determinations. Technical specifications, drawings, and related military standards are accessible through ASSIST-Online or the DODSSP, but patterns, deviation lists, and purchase descriptions are not available through these channels. All contractual documents are deemed issued upon electronic transmission or mailing by the Government, and acceptance of the proposal constitutes mutual agreement to these terms. The point of contact for additional information is Danielle M. Junod of the Navy Supply Systems Command in Philadelphia, PA, and the procurement is managed under solicitation number N0038326QLA99. The Government retains full discretion to determine whether to pursue competition based on responses to this presolicitation notice, and awards will be made exclusively to qualified sources capable of meeting the stringent technical and approval requirements for this critical component.
Navsup Weapon Systems Support

POSTED

about 13 hours ago

DEADLINE

in about 2 months
View Details

More opportunities from Department Of Defense → W6QM Micc-dugway Prov Grd

Same awarding agency

NAICS: 334513
New
Federal
Brand Name (Affinisep) Sampling Media
Solicitation # W911S626QA029
The U.S. Army Test and Evaluation Command at Dugway Proving Ground is seeking a sole-source procurement of Affinisep USA, LLC’s brand-name Solid Phase Extraction (SPE) sampling media under FAR 12.201-1, as no other product meets the technical and regulatory standards required for chemical agent testing programs that must comply with ISO 17025. The acquisition, identified by solicitation number W911S626QA029, is not set aside for small businesses and relies exclusively on Affinisep’s AttractSPE disks and custom pads, specifically Part Nos. SPE-Disks-Bio-DVB-47.20-NF and SPE-Pads-DVB-Bio-T1.100x200.40, to ensure data validity. A total of 13 packs of disks and 2 packs of pads must be sourced from a single production lot to eliminate batch variability, and all items must be shipped directly from the manufacturer in protective Pelican containers to the delivery site in Dugway, Utah, with no third-party distributors permitted. Delivery is required no later than September 30, 2026, with terms F.O.B. destination. Quotations must include fully completed pricing for all four CLINs, including administrative and shipping fees, must provide written guarantees confirming single-lot sourcing and direct manufacturer shipping, and must submit the offeror’s CAGE code, UEI, tax ID, payment terms, and a completed DFARS 252.225-7000 certificate identifying the country of origin for the sampling media. Submissions must be emailed exclusively to Amy Eilerts by 10:00 AM MDT on August 17, 2026, and will be evaluated solely on technical acceptability and lowest price. Failure to meet any requirement, including branding, sourcing, or shipping controls, will result in disqualification, as the government has determined that only this specific product ensures scientific integrity and regulatory compliance.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 484220
Federal
Specialized Packaging and Handling for Sensitive ComponentsThe contract requires specialized packaging and handling for high-value radar components to ensure secure, ESD-safe transport from the original equipment manufacturer to Dugway Proving Ground, Utah, with a ZIP code of 84022. The services must account for the sensitivity of the components by implementing protocols that prevent electrostatic discharge and, where necessary, maintain controlled environmental conditions during transit to preserve functionality and integrity. The work falls under NAICS code 484220, indicating it is classified as a specialized freight arrangement requiring precise logistical expertise. This is a subcontract under the Department of Defense, specifically managed by the W6QM Micc-Dugway Prov Grd office, and is intended to support critical defense operations at a secure federal testing facility. The transport must comply with stringent security and handling standards, reflecting the high-value and sensitive nature of the radar parts. The contract was posted on July 7, 2026, and performance is exclusively located at the Dugway site, with no other locations permitted. All activities must align with DoD requirements for safeguarding sensitive technology during movement across the supply chain.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

30 days ago

DEADLINE

N/A
View Details
NAICS: 541330
Federal
Precision Alignment and Calibration ServicesThe contract involves post-installation services for radar systems including precision alignment, signal calibration, and comprehensive system validation to guarantee operational accuracy and mission readiness. These technical activities are critical for ensuring that installed radar equipment performs reliably under real-world conditions, meeting stringent defense standards. The work is performed at Dugway, Utah, with a ZIP code of 84022, and falls under the NAICS code 541330, indicating it is a specialized scientific and technical consulting service subcontract. The subcontract is managed by the Department of Defense through the W6QM Micc-Dugway Prov Grd organization, with the opportunity posted on July 7, 2026, and is accessible via the SAM.gov platform for relevant contractors seeking involvement in defense-critical instrumentation validation.
Engineering Services

POSTED

30 days ago

DEADLINE

N/A
View Details
NAICS: 335313
Federal
Rotary Joint (Elevation Axis) SupplyA high-precision electromechanical rotary joint is being procured under a subcontract to enable uninterrupted RF signal transmission during radar elevation movements, with strict requirements for exact OEM compatibility to ensure seamless integration with existing defense systems. The component must maintain signal integrity under dynamic operational conditions and is critical for the performance of radar systems deployed at the Dugway Proving Ground in Utah, where the contract’s place of performance is specified. The procurement falls under NAICS code 335313, indicating classification within the manufacturing of electric lighting and wiring equipment, and is administered by the Department of Defense through the W6QM Micc-Dugway Prov Grd office. The solicitation was posted on July 7, 2026, and while no set-aside preferences or point of contact details are provided, the focus remains on delivering a mission-critical component with no tolerance for deviation from specified technical standards.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

30 days ago

DEADLINE

N/A
View Details
NAICS: 333415
Federal
Radar System Dehydrator Unit SupplyThe contract involves the supply of a ruggedized dehydrator unit specifically designed to maintain dry internal conditions within radar systems, ensuring the protection of sensitive electronic components from moisture-related damage. This equipment is critical for sustaining operational reliability in high-humidity or harsh environmental conditions typically encountered in military and defense applications. The unit must meet stringent durability and performance standards to function effectively in field-deployed radar systems without requiring frequent maintenance or intervention. The contract is categorized as a subcontract under NAICS code 333415, indicating it falls within the manufacturing of industrial and commercial machinery and equipment. It is administered by the Department of Defense through the W6QM Micc-Dugway Prov Grd office, with performance required at Dugway, Utah, 84022. The solicitation was posted on July 7, 2026, and there is no indication of a set-aside designation, meaning the opportunity is open to all eligible bidders. The focus is on delivering a highly reliable component that integrates seamlessly into existing radar infrastructure to safeguard system integrity and extend service life under demanding operational conditions.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

30 days ago

DEADLINE

N/A
View Details
NAICS: 334516
Federal
Pulse Profile RF Sensor SupplyThe contract pertains to the procurement of a proprietary RF sensor designed specifically for integration with a C-Band Doppler Radar system, requiring full compatibility with the EEC’s existing architecture and mandatory factory certification to ensure operational integrity and performance standards. The sensor must meet precise technical specifications to function seamlessly within the radar environment, ensuring accurate data collection and system reliability under operational conditions. This subcontract, issued under the NAICS code 334516 by the Department of Defense through the W6QM Micc-Dugway Prov Grd office, is performance-based at Dugway, Utah, with a ZIP code of 84022. The solicitation was posted on July 7, 2026, and emphasizes strict adherence to certification requirements and system compatibility without room for deviation. The supplier must deliver a fully validated unit that meets all embedded technical and regulatory expectations, ensuring seamless interoperability and long-term sustainment within the defense radar network.
Analytical Laboratory Instrument Manufacturing

POSTED

30 days ago

DEADLINE

N/A
View Details
NAICS: 541690
Federal
Technical Documentation and Program SupportThis subcontract, titled "Technical Documentation and Program Support," is designated as a Total Small Business Set-Aside under the SBA regulations and falls under NAICS code 541690. The contract involves maintaining and updating various technical documents including service logs, calibration records, and compliance reports. Additionally, it requires support for PRS and Technical Exhibit B deliverables, as well as tracking training certification. The work is to be performed primarily in Tooele, with the Department of Defense's office W6QM Micc-Dugway Prov Grd as the contracting agency. The contract emphasizes thorough documentation management and program support activities to ensure ongoing compliance and certification requirements are met effectively.
Other Scientific and Technical Consulting Services

POSTED

2 months ago

DEADLINE

N/A
View Details
NAICS: 423830
Federal
Supply of Replacement Parts, Filters, Oils, and SealsThis contract involves the supply of OEM or qualified equivalent replacement parts, consumables, and fluids specifically for the Multi-Shaker Vibration Chamber System, ensuring compliance with all relevant specifications and Buy American requirements. It is a subcontract classified under a Total Small Business Set-Aside in accordance with FAR 19.5, targeting small business participation. The solicitation relates to NAICS code 423830, which pertains to automotive parts, accessories, and tire stores. The contract is issued by the Department of Defense through the W6QM Micc-Dugway Prov Grd office, with the place of performance designated as Tooele, Utah, zip code 84074. The procurement focuses on items such as replacement parts, filters, oils, and seals, essential for maintaining the operational readiness and performance of the Multi-Shaker Vibration Chamber System. This opportunity underscores the importance of adhering to specific sourcing guidelines, emphasizing American-made products while supporting small business contractors.
Industrial Machinery and Equipment Merchant Wholesalers

POSTED

2 months ago

DEADLINE

N/A
View Details
NAICS: 811310
Federal
Preventive Maintenance and Calibration Services for Vibration Chamber SystemThis contract involves providing scheduled preventive maintenance, calibration, and non-personal support services for the Multi-Shaker Vibration Chamber System located at Dugway Proving Ground in Tooele, Utah. The scope includes performing system diagnostics and replacing consumable parts to ensure optimal operation and reliability of the equipment. The contract is designated as a subcontract and is set aside exclusively for small businesses under the SBA Total Small Business Set-Aside program. Administered by the Department of Defense through the W6QM Micc-Dugway Proving Ground office, the contract falls under the NAICS code 811310, which pertains to commercial and industrial machinery and equipment (except automotive and electronic) repair and maintenance. This work will be performed on-site at Dugway Proving Ground, with an emphasis on maintaining the vibration chamber system’s functionality to support ongoing testing and evaluation activities. The contract’s specific solicitation number is not provided, but all necessary details are accessible via the SAM.gov portal.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

2 months ago

DEADLINE

N/A
View Details
NAICS: 484220
Federal
Shipping and Handling for Weight SetsThis contract involves providing secure packaging, transportation, and handling services specifically for weight sets moving between Dugway Proving Ground and various calibration facilities. It is designated as a subcontract under a Total Small Business Set-Aside in accordance with FAR 19.5, targeting small businesses for participation. The service falls under the NAICS code 484220, which pertains to specialized freight trucking, supporting logistics and transport operations. The Department of Defense, through the W6QM Micc-Dugway Proving Ground office, is the contracting agency responsible for this requirement. The location of performance is specified as Tooele, with the ZIP code 84074, indicating the geographic focus of the contract's execution. The main objective is to ensure the safe and reliable handling of weight sets, emphasizing secure packaging and proper transportation to maintain calibration standards and operational readiness.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

2 months ago

DEADLINE

N/A
View Details
NAICS: 811310
Federal
Weight Set Calibration ServicesThis contract involves the provision of ISO 17025 accredited calibration services for weight sets, ensuring that all calibration processes comply with internationally recognized standards. The scope includes not only the precise calibration of the weight sets but also the required documentation and proper labeling of each item to maintain traceability and quality assurance. The services will be performed as a subcontract under a Total Small Business Set-Aside, emphasizing the involvement of small business enterprises. The contract is associated with the Department of Defense, specifically the W6QM Micc-Dugway Prov Grd office, with the place of performance located in Tooele, Utah, zip code 84074. The solicitation does not specify a solicitation number or point of contact, but the related NAICS code is 811310, which pertains to commercial and industrial machinery and equipment repair and maintenance. This contract supports maintaining calibrated weight sets critical to the agency's operations through a rigorous and certified calibration process.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

2 months ago

DEADLINE

N/A
View Details
NAICS: 811310
Federal
Temperature Probe CalibrationThis contract involves the performance of ISO 17025 accredited calibration services specifically for temperature probes. The scope includes not only the calibration itself but also the necessary documentation and labeling that meet the accreditation standards, ensuring the accuracy and traceability of the temperature measurement devices. The contract is categorized as a subcontract and is designated as a Total Small Business Set-Aside under the SBA guidelines, indicating that only small businesses are eligible to compete. The work is to be conducted for the Department of Defense, specifically through the W6QM Micc-Dugway Proving Ground agency, with the place of performance located in Tooele, Utah, ZIP code 84074. The NAICS code associated with this contract is 811310, which pertains to commercial and industrial machinery and equipment repair and maintenance services. The contract was posted on June 2, 2026, and further details or updates can be accessed through the designated federal contractor portal.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

2 months ago

DEADLINE

N/A
View Details