Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

UPS Battery Cabinet

Active
N6426726Q4106Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The U.S. Navy’s Naval Surface Warfare Center is soliciting quotations for a UPS Battery Cabinet under a total small business set-aside, with the solicitation number N6426726Q4106 and NAICS code 335999. This is a combined synopsis and solicitation issued under FAR Part 12 for commercial items, and it serves as the only solicitation document—no written solicitation will be issued. All offers must be submitted electronically in PDF or MS Word format to the designated email by the deadline of July 18, 2026, and must comply with the full requirements; partial quotes will be rejected as non-responsive. Offerors are required to be registered in the System for Award Management and must meet all responsible source criteria to be considered. The award will be made to the single offeror whose proposal is most advantageous to the government based on evaluation factors outlined in Sections L and M of the solicitation, with no addenda attached and existing provisions 52.212-1 and clauses 52.212-4 governing the transaction. All amendments will be posted on the official website, and it is the responsibility of potential offerors to monitor for updates—no information will be provided via telephone. The place of performance is Norco, California, and the point of contact for questions is Colin Dwyer at colin.dwyer.civ@us.navy.mil.

General Info

U.S. Navy seeks UPS Battery Cabinet via small business set-aside, e-submission by July 18, 2026, Norco, CA.

Agency

Department Of Defense → Naval Surface Warfare CenterView Agency

NAICS

335999 - All Other Miscellaneous Electrical Equipment and Component ManufacturingView NAICS

Place of Performance

Norco, CA, 92860, USA

Set-Aside

SBA

Documents

(4)

Amendment+-+N6426726Q41060001.pdf

PDF

Amendment+-+N6426726Q41060002.pdf

PDF

BNJ_Redacted.pdf

PDF

RFQ+-+N6426726Q4106.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

2 updates
PhaseSolicitation
Posted

Solicitation

Amendment 1

Contract was updated

Amendment 2

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Naval Surface Warfare Center
Contacts1 person available
OfficeNORCO, CA, 92860, USA
Organization / Agency
Department Of Defense → Naval Surface Warfare Center
View Agency Profile
Office AddressNORCO, CA, 92860, USA
Contacts
Colin Dwyer
contact@example.gov

Full Description

Show more

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Part 12, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued.  The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2026-01 March 13, 2026. The provisions at 52.212-1 and the clauses at 52.212-4 apply to this acquisition; no addenda are attached.


This is an all-or-none requirement and partial quotes will be deemed unresponsive and will not be evaluated. The Government will award on a single purchase order to the responsible Offeror whose offer conforms to the requirements as stated in the Solicitation and is most advantageous to the Government based on the criteria listed in section L and section M of the Solicitation.


Offerors must be registered in SAM and all responsible sources may submit a quotation which, if timely received, will be considered by the Agency.  Quotes are due no later than the response date in the posting. Responses/offers shall be submitted electronically, PDF or MS Word Format to the email address in the posting.


Any amendment(s) issued to this Request for Quote (RFQ) will be published on this website. Therefore, it is the Offerors responsibility to visit this website frequently for updates on this procurement.  No telephone requests.

Similar Contracts

Same NAICS industry code

NAICS: 335999
New
DIBBS
Electrical Component Manufacturing & AssemblyThe contract requires the manufacture, assembly, and quality assurance of electrical leads in full compliance with military specifications, ensuring rigorous adherence to performance and reliability standards. All work must include First Article Testing to validate conformance before full-scale production and includes serialized delivery to enable full traceability of each component throughout its lifecycle. The solicitation is set aside exclusively for small businesses under the SBA’s Total Small Business Set-Aside program, classified under NAICS code 335999 for other electrical equipment and component manufacturing. It is issued under the Department of Defense via the ASC Commodities Division and allows responses until August 7, 2026, with the expectation of performance under a subcontracting arrangement. The place of performance and point of contact details are not specified, but all deliverables must meet stringent defense quality and documentation requirements.
ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335999
New
DIBBS
CONDUIT, METAL, FLEXIThe contract involves the procurement of 849 linear feet of flexible metal conduit identified by NSN 5975-01-213-7379 as a commercial off-the-shelf item under solicitation SPE7M2-26-T-5656, issued by the Department of Defense’s Nuclear Reactor Program through the Defense Logistics Agency. Delivery is required at 25600 S CHRISMAN ROAD, REC WHSE 57, Tracy, CA 95304-5000, with an established delivery window of 168 days after receipt of order, and FOB origin terms apply. The item must comply with stringent packaging and marking standards including MIL-STD-2073-1E for preservation and packaging, and MIL-STD-129 for labeling and bar-coding, with commercial packaging permitted unless superseded by military specifications. DLA-specific packaging requirement RP001 is mandatory, and mercury or mercury compounds are strictly prohibited in packaging, preservation, and marking. All hazardous materials must be labeled under 29 CFR 1910.1200 and accompanied by Safety Data Sheets aligned with Federal Standard No. 313, while hexavalent chromium is explicitly banned under DFARS clause 252.223-7008. Radioactive materials, if present, require written notification, precise labeling per MIL-STD-129, and waiver requests for deviations. The contract imposes comprehensive cybersecurity obligations requiring implementation of NIST SP 800-171 controls under 252.204-7012 and 252.240-7997 to safeguard covered defense information, with mandatory cyber incident reporting. Ocean shipments must use U.S.-flag vessels unless a waiver is obtained, and contractors must submit detailed shipping documentation within 30 days. The procurement is governed by multiple FAR and DFARS clauses including 52.246-2 for destination inspection and acceptance, 52.216-1 for contract type, and 52.244-6 for subcontracting commercial products. The contracting officer may exercise changes under 52.243-1, and small business representation and employment equity provisions are incorporated. Invoicing must occur via the Wide Area WorkFlow system, and payment terms are subject to standard Federal Acquisition Regulation procedures. All
NUCLEAR REACTOR PROGRAM

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335999
New
DIBBS
POWER SUPPLYThe contract solicits two power supply units under NSN 6130-01-632-2182 with delivery required 111 days after award, FOB origin, and final acceptance at the designated destination in Tracy, California. The contractor must comply with stringent technical and quality requirements from the DLA Master List of Technical and Quality Requirements, which take precedence over all other standards including ASTM D3951 and MIL-STD-129 for packaging and labeling. Packaging must adhere to DLA’s RP001 for palletization and MIL-STD-129 for marking, with unit of issue and quantity per unit pack strictly controlled. Sampling procedures are governed by MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required for acceptance unless otherwise specified, and any attributes identified as critical, major, or minor must be verified at Level VII, IV, or II with corresponding AQLs of 0.1, 1.0, or 4.0. The power supply must not contain intentional mercury or mercury compounds except in specific exempted applications such as batteries, fluorescent lamps, sensors, or weapon systems, and any portable devices containing mercury must be shockproof with a secondary containment per NAVSEA 5100-003D. Cybersecurity compliance is required under CMMC Level 2 with a self-assessment, and additional DFARS clauses mandate NIST SP 800-171 assessments, hazardous material labeling per OSHA and federal statutes, and electronic invoicing exclusively through WAWF. The procurement falls under a simplified acquisition with no specified contract type, and payments are subject to accelerated terms for small business subcontractors. The offeror must provide a Unique Entity Identifier and CAGE code, represent their small business status and socioeconomic category if applicable, certify compliance with trafficking and employment verification requirements, and submit Safety Data Sheets for any hazardous materials prior to award. All deliveries are subject to destination inspection and acceptance by the government, with no tolerance for quantity variance, and failure to meet any technical, packaging, or cybersecurity requirement may result in rejection.
DLA DIST SAN JOAQUIN

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335999
New
DIBBS
TAPE, INSULATION, ELECTRThis contract specifies the procurement of electrical insulation tape designated by NSN 5970014385583 and part number AA59163-1II0040, with a unit of issue of one roll equaling 12 feet. The material is classified as a critical application item with a Type 2 shelf life of 12 months, extendable, and has been reviewed under the HMIC code system and determined non-hazardous, eliminating the need for a Safety Data Sheet package for procurement. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Sampling must comply with MIL-STD-1916 or ASQ Z1.4, requiring zero non-conformances unless otherwise specified, and attributes must be verified at designated levels VII, IV, and II for critical, major, and minor characteristics respectively. All items must be packaged in accordance with MIL-STD-2073-1E and marked per MIL-STD-129 with special code 33 indicating Type II shelf life tracking, and palletization must adhere to DLA packaging standards. The contract calls for delivery of five rolls within 20 days FOB origin, with no variance allowed in quantity, and inspection and acceptance occurring at the destination. The item is subject to tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers, and the supplier must remove all government identification from non-accepted supplies. The solicitation number is SPE4A6-26-T-09UF, issued by the Department of Defense’s ASC Commodities Division, with responses due by August 4, 2026 and performance location in Norfolk, Virginia.
ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335999
New
DIBBS
POWER SUPPLYThe contract specifies the procurement of a sealed lead acid power supply, model SMX2200RMLV2U from SCHNEIDER ELECTRIC IT CORPORATION, with NSN 6130015206163, quantity of one unit, to be delivered within five days FOB destination. The item has a Type I shelf life of twelve months, non-extendable, and packaging must protect terminals from short-circuiting in compliance with MIL-STD-2073-1E and DLA packaging requirements. Marking must follow MIL-STD-129 and include the special code 32 for shelf-life type I. The power supply must not contain intentionally added mercury or mercury compounds, except where functional use is allowed in batteries or specific instruments as defined by NAVSEA, and any portable devices containing mercury must have shockproof construction with a secondary containment boundary. Compliance with OSHA’s revised Hazard Communication Standard is mandatory, requiring submission of Safety Data Sheets and labeling in accordance with 29 C.F.R. 1910.1200 prior to award, along with employee training on hazardous material handling. Sampling for quality assurance must adhere to MIL-STD-1916 or an equivalent zero-based plan with zero non-conformances unless otherwise specified, and critical, major, and minor attributes must be verified at levels VII, IV, and II with corresponding AQLs. The delivery address is FPO AP 96306-1209, Japan, with a secondary freight shipping address in Yokosuka, Japan. The contract requires CMMC Level 2 self-assessment compliance and incorporates all referenced technical and quality requirements from the DLA Master List, with inspection and acceptance occurring at destination. The solicitation number is SPE7L7-26-T-4464, with a response deadline of August 7, 2026, and the original required delivery date is July 20, 2026.
Defense Logistics Agency

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335999
New
DIBBS
POWER SUPPLYThe contract pertains to the procurement of 21 units of a critical application power supply identified by NSN 6120015501710, with delivery required within 37 days of award, FOB origin, and inspection and acceptance to occur at the destination facility in Tracy, California. The item is sourced from two approved suppliers, SPENAX CORP and TFAB MANUFACTURING, LLC, and must conform to strict technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, which supersede all other specifications including ASTM D3951. Packaging must comply with ASTM D3951 and be palletized according to RP001 DLA Packaging Requirements, with all units marked and labeled per MIL-STD-129, including proper unit of issue and quantity per unit pack as specified. Mercury and mercury-containing compounds are prohibited unless explicitly exempted, such as in functional batteries, fluorescent lamps, or instruments specified by NAVSEA, in which case the devices must be shockproof and contain a secondary containment boundary as stipulated in NAVSEA 5100-003D. Delivery must be completed by January 10, 2027, with a need ship date of September 3, 2026, and all shipments must be sent to the designated DLA receiving warehouse in Tracy, California. The contract is a firm-fixed-price, total small business set-aside under NAICS code 335999, and requires full compliance with a comprehensive set of FAR and DFARS clauses addressing employment equity, human trafficking, hazardous materials, cybersecurity, subcontracting, inspection, default, and safeguarding of defense information. Contractors must comply with NIST SP 800-171 for information system safeguarding, implement WAWF for electronic invoicing, and adhere to labeling requirements under 29 CFR 1910.1200 for hazardous materials. Offerors must be registered with a Unique Entity ID and CAGE code and must represent their small business status under relevant socioeconomic categories. No pricing data is provided in the contract, and payment is subject to the conditions of accelerated payments to small business subcontractors. Additional clauses mandate disclosure of compensation of former DoD officials, prohibition of hexavalent chromium, restrictions on communist Chinese military company items, and export control compliance. All contractual obligations are governed by the DLA Master List of Technical and Quality Requirements, and failure to
MARITIME SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335999
New
DIBBS
ADAPTER, BATTERY CHAThis contract pertains to the procurement of five battery charger adapters, identified by part number BTA-70100-6 and NSN 6130-01-667-1604, issued under solicitation SPE7L7-26-T-4467 by DLA District San Joaquin. The item must be manufactured and delivered in strict compliance with the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951 for packaging. Sampling and inspection adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes are classified with verification levels VII, IV, and II for critical, major, and minor characteristics respectively. Physical identification of the product must follow RQ017 guidelines, and all packaging must conform to MIL-STD-129 with palletization meeting DLA Packaging Requirements. Deliveries are FOB origin, with inspection and acceptance occurring at destination, and no quantity variance is permitted. The required delivery date is October 14, 2026, with a 320-day allowable delivery window, and the unit price is $5.00 per unit for a total contract value of $25.00. The shipment must be sent to the designated receiving warehouse in Tracy, California, and all transportation protocols are governed by DLAD Proc Notes C19 and C20. The contract was posted on July 27, 2026, with responses due by August 7, 2026, under NAICS code 335999 for other electrical equipment and component manufacturing.
DLA DIST SAN JOAQUIN

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335999
New
DIBBS
LIGHT, NAVIGATIONAL,The contract pertains to the procurement of two units of a navigational light item, identified by part number 1058742 and NSN 6220-01-680-3201, to be supplied by YULISTA AVIATION, INC, located in Huntsville, Alabama. The U.S. Army Aviation and Missile Command is the acquiring activity, and the item is subject to strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements. Delivery is required within 135 days after order placement, and the solicitation, issued under number SPE8E7-26-T-3412, has a response deadline of August 7, 2026. The procurement falls under the NAICS code 335999 and is managed by the Department of Defense through the DDSP New Cumberland Facility, with performance taking place at New Cumberland, Pennsylvania, ZIP 17070-5002. The technical data associated with this item is subject to export control under either ITAR or EAR, and any disclosure or transfer to foreign persons, including foreign nationals within the United States or overseas, requires prior authorization from the Department of State or Commerce. DFARS 252.225-7048 governs the handling of this controlled data, and only contractors certified under the U.S./Canada Joint Certification Program, who have completed mandated DLA training and submitted the required questionnaire, are permitted access. Additional requirements include compliance with DLA packaging standards, removal of government identification from non-accepted supplies, and submission of documentation for source approval. The primary point of contact for the solicitation is Kelly Mitchell, reachable via email and phone provided, and further details are available through the DIBBS portal.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335999
New
DIBBS
LEAD, ELECTRICALThe contract pertains to the procurement of 50 units of electrical lead with NSN/Part Number 6150-01-604-2177, under solicitation SPE4A6-26-R-XB74, issued by the Department of Defense’s ASC Commodities Division. Delivery is required within 356 days after award, and the solicitation is a Total Small Business Set-Aside, meaning only small businesses are eligible to compete. Technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date, depending on acquisition size. Physical item marking and CMMC Level 2 certification are mandatory for the third-party assessment organization involved. Covered defense information applies, and packaging must conform to DLA standards. Inspection and acceptance occur at origin, and government identification must be removed from non-accepted items. Item Unique Identification is explicitly not required per the service customer’s request. Technical data associated with this item is subject to export control under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons anywhere, including foreign national employees or subsidiaries of U.S. companies. Access to such data is restricted to contractors with approved JCP certification, completed DOD export control training, and DLA authorization. The point of contact for inquiries is Joshua Tuggle, reachable via email or phone, and all proposals must be submitted by the response deadline of August 7, 2026.
ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335999
New
DIBBS
STRIP, ELECTRICAL GROUNThe contract solicitation is for a single unit of a strip, electrical grounding with NSN/Part Number 5999-01-593-3847, under Purchase Request 7017622953, with a delivery requirement of 5 days ADO. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the official DLA website, with revisions effective as of the solicitation issue date or award date depending on procurement scale. Configuration change management, deviation requests, and requirements for removing government identification from non-accepted supplies are all enforceable per referenced clauses. Physical identification and bare item marking requirements apply, and the alternate offeror must submit a complete data package including full documentation for both approved and alternate parts. The solicitation number is SPE7M0-26-T-019H, posted on July 27, 2026, with responses due by August 7, 2026. The procurement is classified under NAICS code 335999, managed by the Department of Defense through the Maritime Supply Chain ESOC, with performance due at Annville, PA, 17003-0000. Primary point of contact is Gerard Quinn, reachable via email and phone provided, and all information can be accessed through the official DIBBS portal.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335999
New
DIBBS
SHIELDING GASKET, ELThe contract is for a single shielding gasket, electronic, identified by NSN 5999-01-619-8651 and part number 60-72241 from TECKNIT SHIELDING SYSTEMS INC, with a quantity of one unit issued as an individual item. Delivery is required within five days of contract award, with shipment originating from the supplier’s location and delivered FOB origin. The item must be shipped by the fastest traceable means, explicitly prohibiting parcel post use, and delivered to the designated Military District of Washington, Production Plant Albany address. Packaging must comply with DLA’s master list of technical and quality requirements, specifically RP001 for packaging, MIL-STD-129 for marking and labeling, and ASTM D3951 for commercial packaging if the item is nonhazardous per FED-STD-313; if hazardous, packaging must meet TQ requirement IP025. All DLA master list requirements override ASTM D3951. The use of any Class I ozone-depleting substance in the design, manufacturing, testing, or cleaning of this item is strictly prohibited unless written approval is obtained from the contracting officer, and this prohibition supersedes any conflicting specification requirements without altering performance expectations; commercial items as defined in FAR 11.001 and part-numbered-only items are exempted. Physical identification and bare item marking are mandatory per RQ017, and removal of government identification from non-accepted supplies is governed by RQ011. Inspection and acceptance occur at the destination. The required delivery date is July 14, 2026, and the solicitation issued under contract number SPE7M0-26-T-007T was posted on July 27, 2026, with a response deadline of July 30, 2026. The item falls under NAICS code 335999, and solicitation is managed by the Department of Defense through the Maritime Supply Chain ESOc Buys office with primary contact Gerard Quinn. No contract value is specified, no evaluation factors or clauses are provided in the documentation, and no formal attachments or supplemental documentation are referenced.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335999
New
DIBBS
HEATING ELEMENT, ELECTRThe contract is for the procurement of 19 electrical nonimmersion heating elements with NSN 4520-00-383-2360, issued under solicitation SPE8E8-26-Q-0441 by the Department of Defense through the DDSP New Cumberland Facility. Delivery is required within 90 days after award, with FOB origin and inspection and acceptance points set at destination. The items must be packaged in accordance with MIL-STD-2073-1E and marked per MIL-STD-129 with no special marking required, and palletization must comply with DLA packaging standards. The heating elements must not contain mercury or mercury-containing compounds unless specifically exempted for functional uses such as batteries, fluorescent lights, sensors, weapon systems, or NAVSEA-specified reagents; portable fluorescent lamps or instruments containing mercury must be shockproof with a secondary containment barrier as mandated by NAVSEA 5100-003D. The contract references DLA’s Master List of Technical and Quality Requirements for all technical and quality specifications identified with R or I numbers, and compliance with the version in effect on the solicitation issue date is required. The delivery address is the DDSP New Cumberland Facility in Pennsylvania, and transportation details follow DLA Procurement Notes C19 and C20. The material need date is January 30, 2027, with the solicitation issued on July 27, 2026, and responses due by August 3, 2026.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → Naval Surface Warfare Center

Same awarding agency

NAICS: 561910
New
Federal
Secure Packaging and Preservation
Packaging and Labeling Services

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332994
New
Federal
Item Unique Identification (IUID) Marking and Labeling
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 541350
New
Federal
Cybersecurity Compliance and CUI Protection Implementation
Building Inspection Services

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 334111
New
Federal
Supply of Brand-Name Rackmounted IT Systems (COTS)
Electronic Computer Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 334111
New
Federal
Small Business Set-Aside for QTY 2 Technologies for Tomorrow Rackmounted SystemsThis solicitation is a total small business set-aside for the procurement of two rackmounted systems manufactured by Technologies for Tomorrow, identified by part number TFT3U-1P1S1G0D-10780N. Only vendors certified as small businesses under the Small Business Administration guidelines are eligible to respond, and the procurement is being conducted under NAICS code 334111. Quotes must be submitted via email to ryan.t.hodges.civ@us.navy.mil no later than 0900 CT on Monday, 03 August 2026, with the solicitation number and vendor name clearly stated in the subject line. Each submission must include detailed pricing, full item specifications and configurations, lead time, a separate line item for shipping if not included, and the vendor’s CAGE code. Partial, incomplete, or late responses will not be accepted, and vendors must be capable of invoicing through Wide Area Workflow. Payment terms are NET 30 days. Award will be made based on best value to the government, evaluating price, delivery schedule, product quality, and past performance. The contract will be issued as a firm fixed price purchase order, and all terms and configuration details must be reviewed in the provided attachments. The requirement is for delivery to Panama City Beach, Florida, and confirmation of receipt of the quote is required by the deadline; vendors are instructed to contact Ryan Hodges directly if no confirmation is received. Kaitlin Summerville is listed as a secondary point of contact, and all information must comply with the official solicitation number N6133126QRH01 issued by the Naval Surface Warfare Center under the Department of Defense.
Electronic Computer Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 561510
New
Federal
Third-Party Contractor Access & Confidentiality ManagementThe contract governs the secure management of third-party contractor access to official files under reference C-204-H001, ensuring strict adherence to confidentiality protocols for support personnel engaged by the Naval Surface Warfare Center. It mandates comprehensive training programs to educate contractors on handling sensitive materials, requires detailed logging of all access events to maintain an auditable trail, and enforces mandatory non-disclosure obligations to safeguard classified or proprietary information. The scope centers on operational security within the Department of Defense’s framework, targeting risk mitigation through accountability and controlled information flow. Performance is centered in Panama City Beach, Florida, with a 32407 zip code, and the contract is classified as a subcontract under NAICS code 561510, indicating it involves administrative management and other support services. The opportunity was posted on July 23, 2026, with a firm response deadline of July 29, 2026, at 4:00 PM, allowing vendors a brief window to submit proposals. No set-aside designation is specified, suggesting the contract is open to all eligible subcontractors. Access to official contract files is tightly regulated, and compliance with confidentiality and access controls is non-negotiable for any entity awarded this task.
Travel Agencies

POSTED

5 days ago

DEADLINE

in about 24 hours
View Details
NAICS: 541611
New
Federal
Subcontract Award Reporting & Executive Compensation ReportingThis contract requires compliance with FAR 52.204-10 by reporting executive compensation and first-tier subcontract awards exceeding $25,000 through SAM.gov, contingent upon meeting annual reporting thresholds. The obligation applies to all subcontractors under the Naval Surface Warfare Center’s award, with data submission mandated regardless of the subcontract size if the cumulative value triggers federal reporting requirements. Reporting must be timely and accurate, ensuring transparency of compensation paid to top executives and details of all qualifying subcontracts awarded during the contract period. The solicitation is linked to NAICS code 541611, indicating services related to management consulting, and performance is geographically tied to Panama City Beach, Florida, with a response deadline of July 29, 2026. While the solicitation number is not provided, the posting date indicates it was made available on July 23, 2026, and the contract type is classified as a subcontract, meaning the reporting responsibilities fall on entities awarded subcontractor status under the prime contract. Failure to submit required information may result in noncompliance penalties or termination of subcontractor eligibility.
Administrative Management and General Management Consulting Services

POSTED

5 days ago

DEADLINE

in about 24 hours
View Details
NAICS: 541611
New
Federal
Cybersecurity Compliance & CUI Safeguarding SupportThe contract requires ongoing support to ensure full compliance with DFARS 252.204-7012 and NIST SP 800-171 standards for the protection of Controlled Unclassified Information associated with the TACDS® system and related contract activities. This includes implementing and maintaining robust cybersecurity controls to safeguard CUI across all systems and processes involved in the program, ensuring continuous alignment with federal cybersecurity requirements. The scope centers on sustaining compliance through monitoring, auditing, documentation, and remediation activities tailored to the unique operational environment of the TACDS® system. The subcontract is solicited by the Naval Surface Warfare Center under the Department of Defense, with performance required at Panama City Beach, Florida, 32407. The NAICS code 541611 indicates the work falls under management consulting services, specifically relating to administrative management and general management consulting. The solicitation was posted on July 23, 2026, with responses due by July 29, 2026, at 4:00 PM Eastern Time. All efforts must be aligned with Department of Defense cybersecurity mandates, and the contractor is expected to demonstrate proven experience in securing sensitive government information within defense-related systems.
Administrative Management and General Management Consulting Services

POSTED

5 days ago

DEADLINE

in about 24 hours
View Details
NAICS: 511210
New
Federal
Commercial Software License Renewal & Maintenance (Filter Bundle)The contract involves the procurement and renewal of 47 licenses for the TACDS® V3.0 Filter Bundle, covering a three-year term with full software delivery, activation, and ongoing technical support provided under standard commercial vendor terms. This agreement ensures continued operation and security maintenance of the filter system through automated updates and vendor-backed assistance throughout the license period. The contract is classified as a subcontract under the NAICS code 511210 and is issued by the Naval Surface Warfare Center, a component of the Department of Defense. The place of performance is specified as Panama City Beach, Florida, with a zip code of 32407. The solicitation was posted on July 23, 2026, and responses are due by July 29, 2026, at 4:00 PM. No set-aside provisions apply, and the contract is open for commercial vendors to compete under typical business terms without special federal procurement restrictions.
Software Publishers

POSTED

5 days ago

DEADLINE

in about 24 hours
View Details
NAICS: 513210
New
Federal
Sole Source to General Dynamics Mission Systems, Inc. for TACDS Renewal per attachmentsThis contract is a sole-source solicitation issued by the Naval Surface Warfare Center, Panama City Beach, Florida, under solicitation number N61331-26-Q-KS46, targeting General Dynamics Mission Systems, Inc. for the renewal of the TACDS® V3.0 Filter Bundle, involving 47 units with no pricing disclosed. The solicitation is conducted under FAR Part 13 as a simplified acquisition using a combined RFQ format, with responses due by July 29, 2026, and requires submission of a capabilities statement, proof of past performance for similar work, and a valid CAGE code. Evaluation will prioritize price as the most significant factor, followed by delivery, quality, and past performance, indicating a best-value trade-off approach rather than a lowest-price technically acceptable process. Performance is to occur at the NSWC-PCD and/or NEDU facility in Panama City Beach, with deliveries scheduled during business hours Monday through Friday, excluding federal holidays, under FOB Destination terms, meaning the contractor bears all transportation costs and risks until delivery. The contract includes standard FAR clauses covering executive compensation reporting, safeguarding covered contractor information systems, prohibited telecommunications and surveillance services, cybersecurity compliance, and item unique identification requiring MIL-STD-130 compliant Data Matrix barcodes. Special contract requirements unique to this award include C-204-H001, which imposes a three-year non-compete restriction on the contractor regarding NAVSEA missions, mandates employee training on confidentiality, and grants the contractor third-party beneficiary rights for unauthorized disclosure of protected information, while also allowing unrestricted access to submitted data by Navy support contractors. Additionally, C-211-H018 clarifies that government approval of deliverables does not relieve the contractor of obligations or assume liability. Invoicing must be submitted electronically through WAWF, and no payment office or appropriation data are provided. All representations and certifications from the offeror, including UEI, CAGE code, small business status, and compliance with cybersecurity and foreign sourcing prohibitions, are required but not yet submitted, and the contract has no defined monetary value due to the absence of pricing details in the solicitation.
Software Publishers

POSTED

5 days ago

DEADLINE

in about 24 hours
View Details
NAICS: 334418
New
Federal
Total Small Business Set Aside ISO Group Brand CCA-Mode 5 Crypto Circuit Card Assembly Request Access to drawings through SAM. Provide CAGE Code when requesting access in SAM.This contract is a firm-fixed-price, total small business set-aside procurement issued by the Naval Surface Warfare Center, Panama City Division, for four units of the ISO Group Brand CCA-Mode 5 Crypto Circuit Card Assembly with NSN 5998-01-554-4968. The solicitation, numbered N61331-26-Q-TR44, is restricted to small businesses as defined under FAR 19.5 and has a maximum estimated value of $350,000. Proposals must be submitted as PDF files via email to terra.s.roberts.civ@us.navy.mil no later than July 30, 2026, at 4:00 PM Eastern Time, and late or incomplete submissions will not be accepted. Vendors must provide their CAGE code and lead time with their quotes, ensure they have access to technical drawings through SAM, and be capable of invoicing through Wide Area Workflow. The government will evaluate proposals based on best value, considering price, delivery, quality, and past performance, without using a lowest price technically acceptable approach. The place of performance and delivery is Panama City Beach, Florida, with FOB Origin and FOB Destination terms applicable, and the contractor is required to comply with all applicable FAR clauses relating to reporting, cybersecurity, item unique identification, and prohibitions on products from restricted entities such as Kaspersky Lab and ByteDance. Compliance with IUID standards per FAR 252.211-7003 is implied, requiring proper labeling with Data Matrix codes and CAGE code, NIIN, and other identifiers. The contract includes options for increased quantity and extended term and prohibits subcontracting with sanctioned entities. All offerors must represent their small business status and comply with mandatory representations regarding executive compensation, entity ownership, cybersecurity controls, and delinquent tax liability. The government retains final authority for inspection and acceptance at the delivery point, and the contracting officer will determine award based on a holistic best value assessment.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

5 days ago

DEADLINE

in 2 days
View Details
NAICS: 541330
Federal
LEGACY LANDING CRAFT AIR CUSHION (LCAC) AND LCAC100 CLASS MAINTENANCE AND REPAIR SUPPORTThe contract pertains to the Legacy Landing Craft Air Cushion LCAC and LCAC100 Class Maintenance and Repair Support under solicitation number N6133126R3106, managed by the Naval Surface Warfare Center in Panama City Beach, Florida. Amendment 0001 introduces targeted revisions to clarify and align document requirements without altering the core terms of the solicitation. Key changes include the removal of three NAVSEA texts, replacement of Clause 52.217-9 Variation II with Variation I, and updates to attachment J.04, Section L, and attachment J.12 to ensure consistency in language, document naming, and procurement title matching Section A and C. The escalation table in Section L 3.3.3 has been revised, and specific instructions for submitting the J.10 E-Craft Labor Rate Workbook have been added to Section L. GFP details in Section L 3.0 and 3.4, along with attachment J.11, have been updated to reflect current requirements. The solicitation is open for responses until July 31, 2026, with primary contact information provided for Frances Negron and Julia Phillips. All other terms and conditions of the original solicitation remain in full effect.
Engineering Services

POSTED

7 days ago

DEADLINE

in 3 days
View Details