USNS CESAR CHAVEZ - Propulsion Machinery Services

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format prescribed in Subpart 12.6 of the Federal Acquisition Regulation (FAR), as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. The solicitation number is N40442-12-T-6024, and it is being issued as a request for quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-57, effective March 15, 2012. NAICS code 541330 applies. This is a small business set-aside. Military Sealift Fleet Support Command (MSFSC), Norfolk, VA intends to award a firm fixed price purchase order for USNS CESAR CHAVEZ (T-AKE 14) for the following services: The requested period of performance for the below service is28 May - 30 May 2012. STATEMENT OF WORK 1.0 ABSTRACT 1.1 This item describes the requirement to collect propulsion shafting strain gauge readings and optical alignment measurements. 2.0 REFERENCE: 2.1 NAVSEA Drawing Number 243-7488962, Shafting Arrangement (Provided previously) 2.2 Tech Manual T9243-AZ-MMC-010, Fixed Pitch Propeller and Shafting with Bearings Model W084836780 (Available onboard ship) 2.3 T-AKE Propulsion Shafting Optical Alignment, Rev. A 2.4 T-AKE Dry Dock Static Alignment 3.0 ITEM LOCATION/DESCRIPTION 3.1 Location/Quantity 3.1.1 Location: 3.1.1 CESAR CHAVEZ (T-AKE 14), NASSCO, San Diego, CA 3.1.2 Main Machinery Space and Shaft Alley 3.1.2 Quantity: Various 3.2 Item Description/Manufacturer's Data 3.2.1 Various 4.0 GOVERNMENT FURNISHED EQUIPMENT/MATERIAL/SERVICES: None. 5.0 NOTES: 5.1 The current schedule indicates setup for optical alignment measurements can start on 29 May 2012 at 1700. 5.2 The inboard propulsion shafting bearings will not be final aligned and chocked in place when measurements are taken. 6.0 QUALITY ASSURANCE REQUIREMENTS: None additional. 7.0 STATEMENT OF WORK REQUIRED 7.1 Take propulsion shafting strain gauge readings and optical alignment measurements using References 2.1, 2.2, 2.3, and 2.4 for guidance. 7.1.1 Strain gauge station are to be installed prior to docking. Dry and wet measurements are to be obtained before the shafting system components and the rudder are removed. 7.2 Contractor is to base estimate on traveling to USNS CESAR CHAVEZ (T-AKE 14) and taking propulsion shafting strain gauge readings and optical alignment measurements while vessel is at NASSCO, in San Diego, CA on 28 and 29 May 2012. 7.3 Provide an "as found" condition report that includes all findings to MSFSC Port Engineer, Stephen Hahn, and MSC N7 rep, Dan Norton. 7.4 Preparation of Drawings: None additional. 7.5 Manufacturer's Representative: None. 8.0 GENERAL REQUIREMENTS: None additional. The following FAR and DFAR provisions and clauses apply to this solicitation and are incorporated by reference: 52.204-7 Central Contractor Registration; 52.212-1 Instructions to Offerors-Commercial Items; 52.212-3 Alt I Offeror Representations and Certifications - Commercial Items (Offerors are advised to include a completed copy of this provision with their quote or a statement stating that it is available via the ORCA website, https://www.acquisition.gov.) 52.212-4 Contract Terms and Conditions-Commercial Items; 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items 52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards (over 25k) 52.209-6 Protecting the Government' Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment (over 30K) 52.219-28 Post-Award Small Business Program Representation. 52.222-3 Convict Labor, 52.222-19 Child Labor - Cooperation with Authorities and Remedies, 52.222-21 Prohibition of Segregated Facilities, 52.222-26 Equal Opportunity, 52.222-35 Equal Opportunity for Disabled Veterans (over 100K) 52.222-36 Affirmative Action for Workers with Disabilities, (Over 15K) 52.222-37 Employment Reports on Special Disabled Veterans (When 52.222-35 Applies) 52.223-18 Contractor Policy to Ban Text Messaging While Driving 52.225-13 Restrictions on Certain Foreign Purchases, and 52.232-33 Payment by Electronic Funds Transfer --Central Contractor Registration 52.222-41 Service Contract Act 52.222-42 Statement of Equivalent Rates for Federal Hires (only used when 52.222-41 applies) 52.215-5 Facsimile Proposals: +1 (555) 000-0000 52.222-50 Combating Trafficking in Persons 52.232-18 Availability of Funds (only used with an unapproved budget, not standard) 252.203-7005 Representation Relating to Compensation of Former DoD Officials 252.204-7004 Required Central Contractor Registration. Alternate A; 252.212-7001 Contract Terms and Conditions Required to Implement Statutes or Executive Orders Application to Defense Acquisition of Commercial Items 252.203-7000 Requirements Relating to Compensation of Former DoD Officials 252.225-7001 Buy American Act--Balance of Payments Program; 252.232-7003 Electronic Submission of Payment Requests; and 252.247-7023 Transportation of Supplies by Sea Alternate III. 252.225-7000 Buy American Act--Balance of Payments Program Certificate, 52.252-2 Clauses Incorporated by Reference This contract incorporates one or more clauses by reference with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause my be accessed electronically at this/these address(es): http://www.arnet.gov/far Responsible sources shall provide the following: 1. Price quote which identifies the requested item(s), unit price, and extended price; 2. Total price; 3. Prompt Payment Terms; 4. Remittance address, Tax Identification Number, DUNS number and Cage Code; 5. Responses to this solicitation are due 06 April 2012 at 1000 local time, Norfolk, VA. LATE QUOTES MAY NOT BE CONSIDERED FOR EVALUATION. Quotes may be emailed to contact@example.gov or faxed via +1 (555) 000-0000 Attn: Kate Petti. Please reference the solicitation number on your quote. MSFSC INVOICE INSTRUCTIONS FOR SHIPPING CHARGES At the time of invoice, a shipping receipt must be provided to substantiate shipping or freight charges greater than $25.00. BASIS FOR AWARD: Award will be made to the responsible, technically acceptable quoter, whose quote, conforming to the combined Synopsis/Solicitation, offers the lowest evaluated price. SHIP & BASE ACCESS Vendors are responsible for correctly submitting forms/applications. Vendors are encouraged to monitor email using "Request a Read Receipt" function and to confirm receipt of facsimile transmissions. Due to enhanced security measures, ship and base access is required for pre-award ship visits (e.g. ship-check) and for contract performance. Specifically the following permissions are required: 1. El Paso Intelligence Center (EPIC) personnel screening requirement 2. Base/Repair Facility Access Request 3. Vehicle Access Request 4. Ship Access List (vendor-provided) All forms are available for download on the MSC contracts webpage at http://www.msc.navy.mil. Click on "Contracts" in the upper right corner. "EPIC template" is under "Reference" subheading. Click on "Online Library of Common Documents" for all other forms. EPIC: Required for access to MSC vessels. Complete EPIC form strictly adhering to format requirements and forward to (CONUS East Coast repairs) MSFSC(underscore)EPIC(underscore)contact@example.gov and (CONUS West Coast and HI repairs) contact@example.gov. EPIC personnel screening requests are desired seven calendar days prior to performance start date. Requests will be managed as expeditiously as circumstances permit. Vendor will be notified by MSFSC of personnel who are denied access to the vessel. Base/Repair Facility Access: Permit is required to access Navy facilities. Base/Repair Facility Access Request is desired seven days prior to ship check or performance start date. Submit forms per the document instruction and to the Port Engineer. A courtesy copy (CONUS West Coast performance locations only) to Ermanno Magliulo, Engineering Director, at contact@example.gov will be appreciated. RAPIDGate is being implemented for access to DoD facilities in CONUS, HI, Guam and Puerto Rico. Vendor is responsible to acquire RAPIDGate status and destination base individual access badge(s) activation prior to performance start date. Delays that may result from inadequate planning are contractor responsibility. Vendor instructions and program information is available at http://www.RAPIDGate.com or tel. +1 (555) 000-0000. RAPIDGate access requires (in succession) (1) Individual Base Commander approval for vendor to access base, (2) Successful vendor RAPIDGate company annual enrollment, (3) Company employee individual enrollment and possession of RAPIDGate identification badge for single base or multiple base (enterprise) access. Vendor is responsible to confirm that each employee held annual RAPIDGate badge is active for the specific facility and performance period in accordance with RAPIDGate User Agreement (http://www.RAPIDGate.com). Additional access permissions may be required such as Navy Base Point Loma "Enclave Access request form". Vehicle Access: Required for vehicle access to Navy facilities. Follow supplemental instructions on Base Access forms or base-specific vehicle access forms. Ship Access List* (Vendor-Provided): On company letterhead attachment via email, the vendor is required to provide the ship master (courtesy copy the Port Engineer) with an accurate, current list of performing personnel prior to being admitted aboard the vessel. Under no circumstances will a hand-delivered list be accepted.