Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

USNS MEDGAR EVERS - STERN TUBE BEARING

Active

N3220526Q0093Federal

Response Deadline08/24/2026, 02:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The USNS MEDGAR EVERS is seeking a stern tube bearing through a combined synopsis and solicitation issued under solicitation number N3220526Q0093, with a posted date of August 3, 2026, and a response deadline of August 24, 2026, at 2:00 PM Eastern Time. This procurement is managed by the Office of MSCHQ Norfolk within the Department of Defense, with performance to occur in Norfolk, Virginia, at the designated zip code 23511. The North American Industry Classification System code 332991 indicates this is for other fabricated metal product manufacturing, specifically tailored for marine propulsion components. No set-aside provisions are applied, meaning the contract is open to all eligible businesses regardless of size or status. Primary point of contact for this solicitation is Darius Swift, reachable via email at DARIUS.SWIFT.CIV@US.NAVY.MIL or by phone at 564-226-4528, with secondary support provided by James Parker at james.l.parker2.civ@us.navy.mil or 564-226-4832. Interested parties must submit responses through the SAM.gov portal using the provided UI link to ensure proper handling and evaluation. The requirements are detailed in the attached redacted SSJ and Combined Synopsis/Solicitation documents, which contractors are expected to review thoroughly to meet technical specifications and delivery timelines for the stern tube bearing, a critical component ensuring the operational integrity of the vessel’s propulsion system.

General Info

USNS MEDGAR EVERS seeks stern tube bearing for Norfolk, Virginia, with bids due August 24, 2026, via SAM.gov.

Agency

Department Of Defense → Mschq NorfolkView Agency

NAICS

332991 - Ball and Roller Bearing ManufacturingView NAICS

Place of Performance

Norfolk, VA, 23511, USA

Set-Aside

NONE

Documents

(2)

Redacted+SSJ.pdf

PDF

Solicitation N3220526Q0093 for USNS Medgar Evers Stern Tube Bearing

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseCombined Synopsis

PostedAug 3

Combined Synopsis

Response DeadlineAug 24

Submission deadline

Response Deadline

08/24/2026, 02:00:00 PM UTCin 20 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Mschq Norfolk

Contacts2 people available

OfficeNORFOLK, VA, 23511-2313, USA

Organization / Agency

Department Of Defense → Mschq Norfolk

View Agency Profile

Office AddressNORFOLK, VA, 23511-2313, USA

Contacts

DARIUS SWIFT

contact@example.gov

+1 (555) 000-0000

James Parker

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

Please see attached redacted SSJ and COmbined Synopsis/Solicitation for Stern Tube Bearing in support of the USNS MEDAR EVERS (T-AKE 13_

Similar Contracts

Same NAICS industry code

BEARING, PLAIN, SPHER

Solicitation # SPE4A6-26-T-12LE

This contract specifies the procurement of 14 spherical plain bearings under NSN 3120-01-576-6374 and part number 5136L017-1 from Circor Aerospace, Inc. DBA 50601, with delivery required within 264 days FOB origin. The item is classified as a critical application component and must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including tailored higher-level quality standards applicable to both manufacturers and non-manufacturers. Packaging, preservation, and marking must conform to MIL-STD-2073-1E, MIL-DTL-197M, and MIL-STD-129, with specific preservation methods determined by bearing type and closure, as outlined in referenced tables and paragraphs. Protective lubricants and preservation controls are dictated by bearing specifications, and the contractor’s packaging facility must meet quality assurance verification criteria. Unit of issue is each, with zero tolerance for quantity variance, and inspection and acceptance occur at destination. Item Unique Identification is not required per customer request, and all marking must follow specified standards without special codes. The solicitation number is SPE4A6-26-T-12LE, issued by the ASC Commodities Division of the Department of Defense, with a response deadline of August 12, 2026, and performance location at Hill AFB, Utah.

ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

BEARING, PLAIN, ROD END

Solicitation # SPE4A6-26-T-11XN

This contract pertains to the procurement of 190 units of a plain rod end bearing with NSN 3120-01-203-4442 and part number BACB10Z4LT, manufactured to the specifications of Boeing drawing BACB10Z Revision N dated January 17, 2012. The item is classified as a source/design control item, and only approved sources listed with their respective CAGE codes are authorized to supply, including U S Bearings, Timken Aurora Bearing Company, New Hampshire Ball Bearings Inc, RBC Transport Dynamics Corp, Sargent Aerospace & Defense, Roller Bearing Company of America Inc, RBC Specline Inc, and RBC Southwest Products Inc. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with revisions tied to the solicitation or award date depending on acquisition size. Compliance with MIL-STD-2073-1E and MIL-DTL-197M is mandatory for preservation, packaging, packing, and marking, with specific procedures dictated by bearing type and closure, including protective lubricant selection and process controls outlined in the standard. Packaging must adhere to DLA requirements, and all items must be marked according to MIL-STD-129 with no government identification removed from non-accepted supplies. Inspection and acceptance are to occur at origin, with no variance allowed in quantity. Unit of issue is each, delivered FOB origin within 171 days. The contract is a total small business set-aside under NAICS code 332991, issued by the Department of Defense’s ASC Commodities Division.

ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

BEARING, PLAIN, ROD EN

Solicitation # SPE4A6-26-T-12LA

The contract pertains to the procurement of a single plain rod end bearing identified by NSN 3120-01-055-8453, with a delivery requirement of 170 days after order. Technical specifications mandate that all Class 3A and 3B threads must be gaged in accordance with SAE AS8879 Category 1 or meet the definition of safety critical threads per MIL-S-7742, excluding self-locking nuts and internal threads under .190 inches diameter or external threads under .138 inches diameter. The item is subject to stringent quality and technical requirements outlined in the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Export control regulations under ITAR or EAR apply to associated technical data, restricting disclosure to foreign persons, including foreign nationals within the U.S., and requiring prior government authorization for any export or transfer. Only DLA contractors with approved US/Canada Joint Certification Program status, completed export control training, and cleared access through the DLA questionnaire may handle the controlled data. Item Unique Identification is not required as specified by the Service customer, in alignment with DFARS 252.211-7003(c)(1)(i). Packaging must comply with DLA standards, inspections are to be performed at origin, and government identification must be removed from non-accepted supplies. The solicitation, issued under SPE4A6-26-T-12LA, was posted on August 4, 2026, with a response deadline of August 12, 2026, under NAICS code 332991 for other fabricated metal product manufacturing, and is managed by the Department of Defense’s ASC Commodities Division.

ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

PADDED DIVIDER SET

Solicitation # SPE8EN-26-T-2769

The contract outlines the procurement of a Padded Divider Set with NSN 6760-01-491-3410, requiring one unit to be delivered within 20 days FOB origin. The item is to be packaged in strict compliance with ASTM D3951 and all applicable DLA Master List of Technical and Quality Requirements, with marking and labeling conforming to MIL-STD-129. Palletization must adhere to RP001 packaging standards, and no parcel post is permitted—shipment must occur via the fastest traceable means. The delivery address is Fort Campbell, Kentucky, with the shipment designated as RDD 555 under project TP 3 and supplier code W9046W. The unit of issue is each, with zero tolerance for quantity variance. The contract prohibits submission of technical data requests to DLA Troop Support due to the absence of an approved technical data package. The item does not involve ozone-depleting substances, and covered defense information may apply. Delivery is set for August 5, 2026, with the solicitation issued under SPE8EN-26-T-2769. The point of contact is Jennifer Esworthy, and the acquisition falls under NAICS code 332991, administered by the Department of Defense’s Construction & Equipment T&I FO Equipment office.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 5 hours ago

DEADLINE

BEARING, BALL, ANNULAR

Solicitation # SPE4A6-26-T-11RC

This contract solicits the procurement of an annular ball bearing with the NSN 3110-00-554-3244, requiring exactly 17 units to be delivered within 171 days under the solicitation number SPE4A6-26-T-11RC. The bearing must be manufactured in the United States, its outlying areas, or Canada, and the cost of all bearing components—rolling elements, retainer, inner race, and outer race—produced in those regions must exceed 50 percent of the total component cost, in strict compliance with DFARS Clause 252.225-7016. A Contractor’s Declaration regarding the domestic or foreign origin of materials is mandatory and must be submitted upon request; failure to provide it may disqualify the quote. If no offerings meet the domestic sourcing requirement, the solicitation may be cancelled or held pending a waiver approval under DFARS 225.7009-4. The bearing must comply with detailed technical and quality specifications referenced by R-numbers, including TDP Rev A Gen 1 per CID A-A-59583D and QAP-13873, and is classified as a critical application item subject to specific physical marking requirements. Packaging and preservation must follow MIL-DTL-197M and MIL-STD-2073-1E, with preservation methods, lubricants, and packaging procedures tailored to bearing type and closure. All packaging must adhere to DLA’s requirements, including proper marking per MIL-STD-129, palletization guidelines, and absence of mercury compounds except for specific authorized uses as defined by NAVSEA. The item is delivered FOB origin with zero variance allowed in quantity, inspected and accepted at origin, and unit of issue is each. No Item Unique Identification is required. The solicitation is issued by the Department of Defense’s ASC Commodities Division, with response deadlines set for August 12, 2026, and primary contact information provided for inquiries.

ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

Solicitation # SPE4A6-26-T-12DR

The contract is for the procurement of 19 ball bearings, identified by NSN 3110015935726 and part number 5911379, manufactured to meet MIL-DTL-197M specifications. The item is classified as a commercial item and is designated as a critical application component for Hamilton Sundstrand Corporation. All bearings must be manufactured in the United States, its outlying areas, or Canada, with at least 50% of the total cost of bearing components originating from these regions, per DFARS clause 252.225-7016. Contractors are required to submit a formal declaration regarding the domestic or foreign origin of materials, and failure to provide this documentation will disqualify their quote. The solicitation may be canceled or held pending a waiver if no compliant offers are received. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with preservation methods determined by bearing type and closure per MIL-DTL-197M, including specified protective lubricants and quality assurance verification. Sampling shall follow MIL-STD-1916 or ASQ H1331 with zero non-conformances unless otherwise allowed. Technical and quality requirements are governed by the DLA Master List, and measuring and test equipment must meet applicable standards. Delivery is FOB origin within 171 days, with inspection and acceptance occurring at the destination. No unit identification marking is required per customer request, and the item is subject to procurement restrictions outlined in the DoD’s foreign bearing waiver policy.

ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

BEARING, PLAIN, ROD END

Solicitation # SPE4A6-26-T-11XH

This contract specifies the procurement of a plain rod end bearing identified by part number L31302G02 and NSN 3120-01-455-1641, with a quantity of five units to be delivered FOB origin within 171 days. The item is classified as a commercial item and must conform strictly to the referenced drawing and technical requirements outlined in the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date. Full compliance with MIL-STD-130N for item identification is required, though unique item identification is waived per customer request. The bearing must be preserved, packaged, and marked in accordance with MIL-DTL-197M and MIL-STD-2073-1E, including specified protective lubrication based on bearing type and closure, and packaging must meet DLA standards with proper preservation methods, cushioning, and marking per MIL-STD-129. Mercury and mercury-containing compounds are prohibited in or on the item except for specific functional applications as defined by NAVSEA, and portable devices containing mercury must include a secondary containment and be shock-proof. The contractor must adhere to tailored quality requirements, including configuration change management, inspection and acceptance at origin, and removal of government markings from non-accepted items. The item is designated as a critical application component and requires physical identification marking as specified. Unit price is $5.00 per unit for a total of $25.00, and all documentation, packaging, and technical compliance are governed by stringent DoD standards with no variance permitted unless formally approved.

ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

BUSHING, SLEEVE

Solicitation # SPE4A6-26-T-11VN

The contract is for the procurement of 10 units of a BUSHING, SLEEVE with NSN 3120-01-171-0041 and part number 12284312, sourced under solicitation SPE4A6-26-T-11VN. The item is classified as a critical application component and is subject to stringent technical and quality controls, including compliance with the DLA Master List of Technical and Quality Requirements, TDP Rev A Gen 1 per drawings 19207 12284312 and 19207 12286054, and adherence to QAP-13873. Cybersecurity requirements mandate CMMC Level 2 self-assessment and handling of covered defense information. The item must be manufactured and packaged in strict accordance with MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and packed in unit containers E5 using preservation method 33, drying agent 49, and wrapping material GB. Inspection and acceptance occur at origin with no quantity variance permitted. Item Unique Identification is not required per customer request, and government identification must be removed from non-accepted supplies. Delivery is FOB origin with a required delivery date of April 27, 2027, and a need ship date of January 31, 2027. Packaging and palletization must conform to DLA packaging requirements, and the shipment must be sent to the DDSP New Cumberland facility in Pennsylvania. The contract is managed by the ASC Commodities Division under the Department of Defense, with Kameron Heningburg as the primary point of contact.

ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

BUSHING, SLEEVE

Solicitation # SPE4A6-26-T-11XR

The contract specifies the procurement of a bushing sleeve identified by part number B5W-28829-27 and NSN 3120-01-466-1050, with a quantity of 19 units to be delivered FOB origin within 171 days. All supplies must comply with DLA’s master list of technical and quality requirements referenced by R and I numbers, and packaging must adhere to MIL-STD-2073-1E and DLA’s packaging standards, including marking per MIL-STD-129 with no special marking codes. Sampling follows MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels or AQLs of VII/0.1, IV/1.0, and II/4.0 respectively; zero non-conformances are required unless otherwise stated. Mercury and mercury compounds are strictly prohibited from intentional addition or direct contact with the hardware, except in specific functional applications like batteries and sensors as defined by NAVSEA, and portable devices containing mercury must include a secondary containment. Preservation, packaging, and marking are further restricted from containing mercury under IP056. The item is designated as a critical application, and all documentation must align with the referenced QAP-13873, Revision B dated 12/11/2013. Delivery must be made to the designated reception warehouse in Tracy, California, with no variance allowed in quantity, and inspection and acceptance occur at the destination. The contract includes specific transportation guidelines referenced in DLAD proc notes C19 and C20, and the unit of issue is EA as defined by DLA standards.

ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

PLATE, RETAINING, BEA

Solicitation # SPE4A6-26-T-12JL

The contract is for a single retaining plate bearing, identified by NSN 3110-01-209-7824, with a delivery requirement of 20 days after contract award. The solicitation number is SPE4A6-26-T-12JL, issued on August 4, 2026, with responses due by August 12, 2026. The contract is classified under NAICS code 332991 and is managed by the ASC Commodities Division of the Department of Defense, with performance required in Austin, Texas, ZIP 78703-1222. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with applicable revisions determined by the solicitation or award date based on acquisition size. The item is subject to export control under either ITAR or EAR, prohibiting unauthorized disclosure or transfer of technical data to foreign persons anywhere, including U.S. subsidiaries or employees; compliance requires prior authorization from the Department of State or Commerce. Contractors must hold approved US/Canada Joint Certification Program status, complete mandatory training on DOD export-controlled data handling, and pass the DLA Export-Controlled Technical Data Questionnaire to access controlled information. DFARS 252.225-7048 applies to data protection. Government identification must be removed from non-accepted supplies, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Measuring and test equipment must meet specified standards. The primary point of contact is Tracy Fletcher, reachable at the provided phone and email.

ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

BEARING, WASHER, THRUST

Solicitation # SPE4A6-26-Q-1271

The contract pertains to the procurement of 20 units of a thrust washer bearing with NSN 3120-01-287-2159 under solicitation SPE4A6-26-Q-1271, with a response deadline of August 13, 2026, and a delivery requirement within 180 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions tied to the solicitation or award date depending on acquisition size. The item is subject to export control regulations under ITAR or EAR, prohibiting unauthorized disclosure or export of associated technical data to foreign persons or entities, including foreign nationals within the United States, and DFARS 252.225-7048 applies. Access to this controlled data is restricted to DLA contractors who hold a valid US/Canada Joint Certification Program registration, have completed required DOD export control training and the DLA questionnaire, and have received explicit approval from the DLA authority. Additionally, packaging must meet DLA standards, non-accepted supplies must have government identification removed, inspection and acceptance may occur at origin, and the item is classified as covered defense information. The contracting activity is the Defense Logistics Agency’s Commodity Division, with point of contact Brea White reachable via email and phone provided.

ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

CONE, TAPERED ROLLER

Solicitation # SPE4A6-26-T-12KS

This contract specifies the procurement of a tapered roller bearing with NSN 3110-01-246-2455 and part number JD7386, quantities of 15 units, to be delivered within 57 days FOB origin with no tolerance for variance in quantity. The item is designated as a critical application and must comply with stringent technical and quality mandates from the DLA Master List of Technical and Quality Requirements, including inspection and acceptance at origin. Packaging must meet MIL-STD-2073-1E and MIL-DTL-197M standards, with preservation methods tailored to bearing type and closure, and marking required per MIL-STD-129. All packaging operations must adhere to DLA packaging requirements and quality assurance verification protocols. The bearing is subject to strict domestic sourcing restrictions under DFARS Clause 252.225-7016, mandating that the product be manufactured entirely in the United States, its outlying areas, or Canada, and that over 50% of the total cost of all bearing components—rolling elements, retainer, inner race, and outer race—originate from these locations. Contractors must submit a formal declaration verifying compliance, obtainable from the DLA Foreign Bearing Waiver website; failure to provide this documentation will disqualify the quote. Mercury and mercury-containing compounds are prohibited from direct contact with the hardware except for specific enumerated functional applications like batteries or sensors, with portable fluorescent lamps and instruments requiring dual containment and shockproof design. The solicitation is issued under SPE4A6-26-T-12KS with a response deadline of August 12, 2026, and may be canceled or held if no compliant offers are received.

ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

More opportunities from Department Of Defense → Mschq Norfolk

Same awarding agency

USNS YUMA (T-EPF 8) - Air Compressors

Solicitation # N3220526Q7226

The Military Sealift Command is seeking to procure brand name Sauer Compressor parts for installation and maintenance aboard the USNS YUMA (T-EPF 9), a critical vessel in the Navy’s expeditionary fleet. This procurement is being conducted under solicitation number N3220526Q7226, which was posted on August 4, 2026, with a response deadline of August 20, 2026. The contract is designated as a Small Business Set Aside - Total, meaning only small businesses are eligible to compete, and it falls under NAICS code 333912, which covers other commercial and service industry machinery manufacturing. All parts must meet strict brand name specifications to ensure compatibility, reliability, and operational readiness onboard the ship. The contracting activity is managed by the Military Sealift Command in Norfolk, Virginia, with Richard Bell serving as the primary point of contact for inquiries and submissions. Proposals must be submitted through the SAM.gov platform, and while the place of performance is not geographically specified, the parts are intended for use directly on the USNS YUMA, requiring timely delivery and adherence to military-grade quality standards. The contract type is combined, indicating it may include both requirements and incentive structures, and the agency emphasizes the urgency of sourcing authentic Sauer components to maintain the integrity of the ship’s air compression systems during ongoing missions.

Air and Gas Compressor Manufacturing

POSTED

about 10 hours ago

DEADLINE

USNS NEWPORT (T-EPF 12) - Engine Parts

Solicitation # N3220526Q7224

The U.S. Navy’s Military Sealift Command is seeking to procure engine parts from Fincantieri Marine Systems for installation onboard the USNS NEWPORT (T-EPF 12), a high-speed transport vessel operated by the Department of Defense. The solicitation, identified as N3220526Q7224, was posted on August 4, 2026, with a response deadline of August 13, 2026, at 2:00 PM Eastern Time. This is a combined solicitation with no set-aside classification, meaning all eligible contractors may compete without restrictions based on business size or type. The North American Industry Classification System code 333618 applies, indicating the requirement falls under other engine equipment manufacturing. The contracting office is located in Norfolk, Virginia, under the Navy’s Mschq Norfolk command, and all performance is expected to support the vessel’s operational readiness. Primary point of contact for inquiries is Richard Bell, reachable via email or phone, and all submissions must be processed through the official SAM.gov portal linked in the solicitation.

Other Engine Equipment Manufacturing

POSTED

about 10 hours ago

DEADLINE

USNS LUCY STONE - Steering Gear Foundations

Solicitation # N3220526Q7212

The Military Sealift Command is seeking to procure four units of Macgregor USA Inc. Steering Gear pump tank foundations, part number S-22393, specifically to support the USNS LUCY STONE (T-AO 209). This procurement is designated as sole source because Macgregor USA Inc. is the original equipment manufacturer with no authorized distributors for this specific component. The requirement is formally issued under solicitation number N3220526Q7212, posted on July 15, 2026, with responses due by 6:00 PM EST on July 31, 2026. The contract falls under NAICS code 332999 for other fabricated metal product manufacturing and is not subject to any small business set-aside. The contracting office is located at the Department of Defense’s MSC Norfolk office in Norfolk, Virginia, and the performance location is in Virginia. Primary point of contact for inquiries is Austin Amory, reachable via email at austin.m.amory.civ@us.navy.mil.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

USNS NEWPORT - SEA CHESTS REPLACEMENT

Solicitation # N3220526Q0087

The USNS NEWPORT - SEA CHESTS REPLACEMENT solicitation, identified by number N3220526Q0087, is a Department of Defense procurement action issued by the Office of MSCHQ Norfolk in Norfolk, Virginia. This solicitation seeks contractors to perform replacement work on sea chests for the USNS NEWPORT, a vessel requiring maintenance to ensure operational readiness and safety. The NAICS code 332420 indicates the work falls under metal hull and structural work for marine vessels, targeting firms with specialized ship repair and fabrication capabilities. The opportunity was posted on July 16, 2026, and responses are due by July 26, 2026, at 4:00 p.m. Eastern Time. There is no specified set-aside classification, meaning it is open to all eligible small and large businesses. The place of performance details are not fully defined but will likely involve naval facilities or shipyards under the control of the Navy. Primary point of contact is Maurice Hawkins, reachable at 564-226-5421 or maurice.l.hawkins.civ@us.navy.mil, with secondary support from Jerica Bray at 564-226-4582 or jerica.e.bray.civ@us.navy.mil. Full requirements and technical specifications are detailed in the attached solicitation documents, which bidders must review thoroughly to submit a responsive proposal.

Metal Tank (Heavy Gauge) Manufacturing

POSTED

DEADLINE

Domestic Manufacturing and Supply ComplianceThis contract requires strict adherence to the Buy American Act and DFARS regulations governing the country of origin for all supplied goods, ensuring that only items produced or substantially transformed in the United States are delivered. It prohibits the inclusion of any foreign-made equipment or components that violate federal supply chain integrity standards, mandating full compliance with sourcing and manufacturing requirements to safeguard domestic industrial capabilities. All deliverables must be verified for origin, with documentation and certifications provided to validate adherence to these federal mandates. The contract is a subcontract under the Department of Defense, specifically managed by Mschq Norfolk, with performance required at the location in Norfolk, Virginia, ZIP code 23511. It falls under NAICS Code 332991, indicating a focus on other fabricated metal product manufacturing. The solicitation was posted on July 31, 2026, with responses due by August 20, 2026, and the awardee must maintain complete traceability of materials and manufacturing processes to meet federal compliance thresholds. Failure to comply may result in contract termination, financial penalties, or debarment from future federal opportunities.

Ball and Roller Bearing Manufacturing

POSTED

DEADLINE

Commercial Item Quotation and Logistics ManagementThe contract titled Commercial Item Quotation and Logistics Management requires the subcontractor to handle end-to-end procurement of federal commercial items under FAR and DFARS compliance. Responsibilities include preparing accurate product quotations, coordinating logistics across multiple delivery locations, and scheduling timely deliveries to the designated site in Norfolk, Virginia, with a zip code of 23511. The work involves ensuring all documentation, shipping procedures, and regulatory standards are strictly followed to meet government procurement requirements for commercial items. The contract is structured as a subcontract under the NAICS code 423690, indicating distribution services, and is tied to the Department of Defense through its agency name, Mschq Norfolk. All proposals must be submitted by the deadline of August 20, 2026, at 2:00 PM Eastern Time, with the opportunity posted on July 31, 2026, through the SAM.gov platform.

Other Electronic Parts and Equipment Merchant Wholesalers

POSTED

DEADLINE

Pedestal Cooler Supply and DeliveryThe contract involves the supply and delivery of two pedestal coolers to Naval Base Norfolk and Williamsburg, Virginia, with full responsibility for packaging, shipping, and ensuring compliance with all federal procurement and delivery standards. The work must adhere to the North American Industry Classification System code 333415, which pertains to air conditioning and warm air heating equipment and commercial and industrial refrigeration equipment manufacturing, and is structured as a subcontract under the Department of Defense, specifically managed by Mschq Norfolk. Performance is required at the Norfolk location with zip code 23511, and all deliverables must be completed in accordance with federal guidelines governing government contracts. The solicitation is open with a response deadline of August 20, 2026, at 2:00 PM, and the contract was posted on July 31, 2026. While no set-aside designation is specified, the subcontractor is expected to meet all regulatory and logistical requirements associated with federal supply chains, including timely delivery, proper documentation, and adherence to quality and safety specifications for equipment destined for military installations. The contract does not list a point of contact, but further details can be accessed through the official SAM.gov workspace link provided.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

DEADLINE

USNS ROBERT PEARY - PEDASTAL COOLER, SC

Solicitation # N3220526Q0090

The contract solicitation for the Pedestal Cooler in support of the USNS ROBERT PEARY T AKE 5 is issued under solicitation number N3220526Q0090 with a combined synopsis and solicitation format. Interested parties must submit responses by the deadline of August 20 2026 at 2:00 PM Eastern Time with the solicitation originally posted on July 31 2026. The effort falls under NAICS code 332991 which pertains to other fabricated metal product manufacturing and is not subject to any set aside provisions meaning all eligible vendors may compete. The awarding office is the Military Sealift Command Norfolk within the Department of Defense with the office located in Norfolk Virginia 23511 and performance will also occur in Norfolk Virginia. Primary point of contact is Darius Swift reachable at 564 226 4528 or via email at DARIUS.SWIFT.CIV@US.NAVY.MIL with secondary contact James Parker at 757 341 5657 or james.parker5@navy.mil. Additional details and submissions must reference the attached redacted SSJ and Combined Synopsis Solicitation which outlines technical requirements and procurement specifications.

Ball and Roller Bearing Manufacturing

POSTED

DEADLINE

USNS MEDGAR EVERS (T-AKE 13 ) ROHDD

Solicitation # N3220526R6120

The USNS MEDGAR EVERS (T-AKE 13) will undergo a regular overhaul and dry docking under a contract scheduled for performance between March 1, 2027, and July 28, 2027, with all work to be conducted at a contractor facility located on the U.S. East or Gulf Coast to accommodate operational and national security requirements. The solicitation, identified as N3220526R6120, was posted on July 16, 2026, and responses are due by July 29, 2026, with the full solicitation available through the Procurement Integrated Enterprise Environment portal. Access to the detailed work item package and technical data requires submission of a non-disclosure agreement to the designated point of contact. This procurement is structured as a total small business set-aside based on market research, with the expectation of receiving proposals from at least two small business concerns. The contract falls under NAICS code 336611 and is managed by the Department of Defense through the Office of MSCHQ Norfolk in Virginia, with primary and secondary points of contact provided for inquiries.

Ship Building and Repairing

POSTED

DEADLINE

in about 1 month

Military Sealift Command Legislative Monitoring Subscription Service

Solicitation # N3220526Q7144

The Military Sealift Command is seeking quotes for the Legislative Monitoring Subscription Service under solicitation N3220526Q7144, which is issued as a commercial supply acquisition in accordance with FAR Part 12. This solicitation is exclusively a Small Business Set Aside, meaning only small businesses are eligible to respond, and it is not open to larger enterprises. The North American Industry Classification System code for this requirement is 519290, indicating it involves other information services, likely centered on tracking, analyzing, and reporting legislative activities relevant to the Department of Defense. Quotes must be submitted by August 13, 2026, at 7:00 a.m. Eastern Time, and no separate written solicitation document will be issued beyond what is provided in this announcement and the attached SF 1449, which contains the full specifications for the required supplies and all applicable contract clauses. The solicitation is managed by the Office of Military Sealift Command located in Norfolk, Virginia, with the place of performance also in Norfolk. Primary point of contact for inquiries is Keeley Crosby, reachable via email, with John Walker listed as the secondary contact. Interested vendors must review the attached SF 1449 for detailed deliverables, compliance requirements, and evaluation criteria. The acquisition is posted on SAM.gov, and all submissions must align strictly with the terms outlined in the solicitation, as failure to comply may result in disqualification. The government will evaluate responses based on commercial practices and pricing, leveraging the streamlined procedures permitted under FAR Part 12 for commercial items.

Web Search Portals and All Other Information Services

POSTED

DEADLINE

Dry Cargo TUGCON

Solicitation # N3220526R6123

The U.S. Navy, through the Office of MSCHQ Norfolk under the Department of Defense, has issued solicitation N3220523R6123 for Dry Cargo TUGCON services, exclusively set aside for small businesses under the SBA Total Small Business Set Aside program. The opportunity is classified under NAICS code 483111, which pertains to water transportation of dry bulk cargo. All responses must be submitted by 3:00 PM Eastern Time on August 5, 2026, with the solicitation being publicly posted on July 30, 2026. Performance of the contract will occur at an undetermined location, as no specific place of performance has been provided in the data. Primary point of contact for inquiries is Matthew Price, reachable at 757-341-3348 or matthew.r.price40.civ@us.navy.mil, with Christopher Tomlin serving as the secondary contact. Further details and submissions can be accessed through the official SAM.gov solicitation page.

Deep Sea Freight Transportation

POSTED

DEADLINE

in about 17 hours

Dry Cargo TUGCON

Solicitation # N3320526R6123

The Military Sealift Command’s PM41 is seeking a U.S. Flag, Jones Act compliant, ocean-going certified tug to perform a single voyage towing Crane Barge BD 6801 in accordance with the U.S. Navy Tow Manual SL740-AA-MAN-010. The service is set to begin no earlier than 15 September 2026 at Norfolk Naval Shipyard in Portsmouth, Virginia, with destination at Pearl Harbor Naval Shipyard in Hawaii, and the layday window ends on 30 September 2026. This solicitation, identified as TUGCON and designated under Product or Service Code V124 for Transportation, Travel, and Relocation Services, is exclusively set aside for small businesses, based on responses from prior market research and confirmed by the MSC’s Deputy Associate Director of Small Business Programs. The proposed solicitation number is N3220526R6123, with responses due by 5 August 2026, and the contracting office is located at 471 East C Street, Naval Station Norfolk, VA 23511. Matthew Price is the primary point of contact for inquiries, reachable via email or phone, and the award is expected to be issued shortly after evaluation, though the contract dollar amount, contractor, and final award number remain undetermined. The NAICS code 483111 applies to this ocean transport requirement.

Deep Sea Freight Transportation

POSTED

DEADLINE

in about 17 hours