Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Solicitation opportunity from Utah was posted on March 6, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Utah Tech University - Gas Chromatography–Mass Spectrometry (GC‑MS) System

Closed
26-0225State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334516
New
SLED
NDSU - Dynamic Mechanical Analyzer
Solicitation # SRC000482
North Dakota State University is soliciting bids under solicitation SRC000482 for a complete Dynamic Mechanical Analyzer (DMA) system to support polymer testing research on electrically responsive surface textures for autonomous platforms. The required system must support bending, tension, and compression modes with a temperature range of -170 to +600 degrees Celsius and a normal force sensor range of 0.001 N to 50 N. The base bid must include all necessary hardware, sensors, fixtures, first-year software licenses, delivery, installation, commissioning, training, and a one-year warranty. Optional additions may include rotational or torsional capabilities and multi-year software support. The contract will be awarded to the lowest responsive and responsible bidder who meets all mandatory technical specifications. Bidders must submit their responses through the NDBuys portal by November 4, 2026, at 2:00 PM CT, including a completed Cost Proposal Form and a Technical Compliance Form. Delivery and installation are expected at the R1A Laboratories in Fargo, North Dakota, for Fall 2026 or January 2027. The successful contractor must operate as an independent entity, maintain minimum liability insurance of 500k/2M, and adhere to non-discrimination and public records laws. All communications regarding this solicitation must be directed exclusively to the Procurement Officer, Casie Ewalt.

POSTED

about 9 hours ago

DEADLINE

in 8 days
NAICS: 334516
New
Federal
6632--FY27 Microbial Incubation ID and Susceptibility CPT
Solicitation # 36C24827Q0029
The Department of Veterans Affairs is conducting market research through a Sources Sought Notice to identify qualified vendors capable of providing a comprehensive Microbial Incubation, Identification (ID), and Antimicrobial Susceptibility Testing (AST) system for the James A. Haley Veterans Hospital in Tampa, Florida. The requirement includes the delivery and installation of two redundant analyzers—one large capacity and one medium capacity—along with incubators, middleware, and hardware and software for up to ten workstations. Technical specifications require a bi-directional, bar-coded computer interface compatible with VA laboratory systems and specific sensitivity and resolution standards for MALDI TOF systems. The scope also encompasses a continuous supply of reagents, calibrators, and consumables, which must have a minimum shelf life of six months upon delivery. Interested parties must submit a brief capability statement by November 10, 2026, including their SAM Unique Entity ID, socioeconomic status, and evidence of their ability to meet the functional requirements under NAICS code 334516. Respondents should identify available contract vehicles, such as GSA FSS or NASA SEWP, and provide estimated timelines for delivery, validation, and software implementation. The government will evaluate submissions based on technical specifications, manufacturer reputation, and the ability to provide a tiered pricing structure for cost-per-test (CPT) models. This notice is for planning purposes only and does not constitute a formal solicitation; however, it establishes strict requirements for data security, NARA-compliant data destruction, and mandatory personnel training for any future awarded contractor.
248-NETWORK Contract Office 8 (36C248)

POSTED

about 18 hours ago

DEADLINE

in 14 days

AI Contract Overview

Show more

Utah Tech University is seeking competitive sealed bids from qualified vendors for the procurement of a new Gas Chromatography–Mass Spectrometry (GC-MS) system to enhance its academic instruction and research capabilities. The solicitation, issued as an Invitation for Bids (IFB), requires vendors to submit equipment proposals that meet or exceed the specified requirements, ensuring that the awarded system is suitable for the University's technical needs. The selection will be based on the lowest responsive and responsible bid that complies fully with the University's specifications. The solicitation is identified by number 26-0225 and was posted on March 6, 2026. Bidders must submit their responses by the deadline of March 19, 2026, at 6:00 PM. This opportunity is managed by Utah Tech University within the state of Utah, with performance also expected within the state. No set-asides or specific business classifications are indicated for this procurement. Vendors interested in participating can access full details and submit bids through the designated online portal.

General Info

Utah Tech seeks lowest compliant bid for GC-MS system, submission deadline March 19, 2026.

Agency

Place of Performance

UT, USA

Set-Aside

NONE

Documents

1

IFB #26-0225 - Medical Instruments for Chemistry & Biochemistry - Utah Tech Supplemental Terms

PDF, Low prioritycontract-document
Low

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseClosed
Posted

Solicitation

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyUtah
ContactsNo contacts available
OfficeUT, USA
Organization / AgencyUtah
Office AddressUT, USA
ContactsNo contact information available

Full Description

Show more
Utah Tech University is seeking sealed bids from qualified vendors to provide a new Gas Chromatography–Mass Spectrometry (GC-MS) system to support academic instruction and research activities.
This solicitation is issued as an Invitation for Bids (IFB). Vendors must provide equipment that meets or exceeds the required specifications outlined in this document. Award will be made to the lowest responsive and responsible bidder whose equipment meets the technical specifications and requirements of the University.

More opportunities from Utah

Same awarding agency

NAICS: 541310
New
SLED
Sandy City - Architectural Design for City Hall Stairs, Ramp, and Landscape
Solicitation # GJ27-124
Sandy City is soliciting proposals for professional architectural design services under solicitation GJ27-124 to improve Sandy City Hall, located at 10000 South Centennial Parkway, Utah. The scope of work involves the replacement of the west stairs, the construction of an ADA-compliant pedestrian ramp, and a comprehensive landscape redesign of the north hillside and southwest corner. Key technical requirements include the design of a complete hydronic snowmelt system with a new boiler integrated into the City's Alerton building automation system, as well as landscaping that adheres to Waterwise design principles and Sandy City's Division 7 Landscaping and Irrigation standards. The selected architect will be responsible for providing preliminary concepts, 60% and 90% design submissions, and final bid-ready construction documents, along with cost estimates at each milestone. The project operates on a strict timeline, with 100% complete construction documents due by February 1, 2027, and a final project completion goal of June 30, 2027. The architect is also required to participate in a warranty walk approximately 10 months after substantial completion. Proposals must be submitted as a fixed, lump-sum fee via the sandycity.ionwave.net portal. The deadline for submitting written questions is November 4, 2026, at 11:30 AM MT, and the final closing date for bid submissions is November 6, 2026, at 11:30 AM MT. Evaluation will be based on a 100-point criteria system, and the design must ensure continued safe public access and building egress as City Hall will remain operational throughout the construction process.
Architectural Services

POSTED

1 day ago

DEADLINE

in 10 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS