Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

VACUUM PUMP UNIT, RE

Awarded
SPE7M1-26-Q-0901Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract solicitation SPE7M1-26-Q-0901 seeks two vacuum pump units identified by NSN 4310-01-583-7148, with delivery required within 90 days after award at FOB Origin to Electric Boat Corporation in N Stoughton, Connecticut. The procurement falls under simplified acquisition procedures and is administered by the DLA Land and Maritime, Maritime Supply Chain, with Michele Davis listed as the primary point of contact. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, and compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking and barcoding is mandatory. The units must adhere to strict preservation standards using cold/dry methods, and all packaging must conform to RP001 DLA packaging guidelines including palletization and specific container types. Government identification must be removed from any non-accepted supplies under RQ011, and the use of ozone-depleting chemicals and mercury-containing materials is prohibited unless explicitly approved for specific applications like sensors or instruments under NAVSEA 5100-003D. Configuration management for the item must follow MIL-STD-973, and a complete data package for both approved and alternate parts is required. The contract mandates electronic invoicing through WAWF and prohibits Fast Pay. Offers must be submitted via the DLA eProcurement portal by May 1, 2026, and will be evaluated based on technical compliance with mandatory requirements, though the exact basis of award—whether LPTA or best value—remains unspecified. The solicitation references FAR and DFARS clauses including employment reporting on veterans and sustainable products, both with a deviation issued in 2026, and while it mentions small business reserve notification, this is not a set-aside. No contract value is stated as pricing fields remain blank, reflecting the pre-award nature of the document.

General Info

Two vacuum pump units ordered for delivery in 90 days to Electric Boat Corp, complying with strict DLA, MIL-STD, and environmental standards.

Contract Value

$2,038

NAICS

333996 - Fluid Power Pump and Motor Manufacturing

Place of Performance

IL, USA

Set-Aside

NONE

Award Issued Date

Documents

2

SPE7M126P7313.pdf

PDF

SPE7M1-26-Q-0901.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseAwarded
Posted

Solicitation

Awarded

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Defense Logistics Agency
Contacts1 person available
OfficeUSA
Office AddressUSA

Full Description

Show more
DLA award SPE7M126P7313 posted on DIBBS. Awardee: PATTERSON COONEY INC (CAGE 9U103) Total Contract Price: $2,038.00 Award Date: 05-28-2026 Solicitation: SPE7M1-26-Q-0901 Line items: - VACUUM PUMP UNIT, RE (NSN/Part 4310015837148, PR 7016182533)

Similar Contracts

Same NAICS industry code

NAICS: 333996
New
DIBBS
SEAL ASSEMBLY, SHAFT, SP
Solicitation # SPE7M1-27-T-1005
Solicitation SPE7M1-27-T-1005 is a fixed-price request for quotations issued by the DLA Weapons Support Maritime Supply Chain for the procurement of 13 spring-loaded shaft seal assemblies, identified by NSN 4320-01-439-0131. This is a restricted source, critical application item requiring engineering source approval from the government design control activity, specifically referencing Shapes Group Ltd Co. part number 5750008-003. The required delivery date is October 17, 2027, with a need ship date of April 13, 2027, and a delivery lead time of 168 days. Delivery is to be made to DLA Distribution San Diego, with inspection and acceptance occurring at the destination per FAR 52.246-2. The contract mandates strict adherence to technical and quality requirements via the DLA Master List (RA001) and specifies packaging and marking according to MIL-STD-2073-1E and MIL-STD-129. Environmental restrictions prohibit the intentional addition of mercury or mercury-containing compounds and the use of Class I ozone-depleting chemicals. Contractors must utilize the Wide Area WorkFlow system for invoicing and comply with various FAR and DFARS clauses, including those regarding cybersecurity (DFARS 252.204-7012), the Buy American Act, and the Berry Amendment. Quotations must be submitted through the DIBBS portal by October 26, 2026.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333996
New
DIBBS
CYLINDER BLOCK UNIT, HY
Solicitation # SPE7M1-27-U-0806
Solicitation SPE7M1-27-U-0806 is a total small business set-aside issued by the DLA Weapons Support Maritime Supply Chain for the procurement of Cylinder Block Units for hydraulic motor-pumps, identified by NSN 4320015656163 and part number 1FX292. This request may result in a unilateral Indefinite Delivery Contract for a one-year period with a maximum value of 350,000.00 dollars. The estimated annual quantity is 22 units, with a guaranteed contract minimum of 3 units and a minimum delivery order quantity of 5 units. Delivery is required within 34 days after receipt of order, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 for general packaging, MIL-STD-129 for labeling, and RP001 for palletization, while ensuring all DLA Master List of Technical and Quality Requirements take precedence. Hazardous materials must be labeled according to the Hazard Communication Standard. Invoicing and payment will be processed electronically through Wide Area WorkFlow. Award evaluation is based on the quoted price for the estimated annual demand, and the buy may be eligible for automated award provided the offeror does not quote used or remanufactured items and maintains a quote validity period of at least 90 days.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

NAICS: 325520
New
DIBBS
RESIN EPOXY
Solicitation # SPE8ES-27-T-0148
Solicitation SPE8ES-27-T-0148 is a total small business set-aside request for quotations issued by the Defense Logistics Agency Troop Support for the procurement of 72 cases of Resin Epoxy, identified by NSN 8040-01-664-1544. Each case must contain 12 units. The requirement is for delivery FOB Destination to the HAZMINCEN Naval Base Ventura County in Port Hueneme, California, with an original required delivery date of October 23, 2026, and a delivery window of 20 days after the order is placed. The material is classified as a Type I (Code K) item with a non-extendable shelf life of 18 months, calculated from the date of shipment. Due to the hazardous nature of the material, the supplier must provide Safety Data Sheets and Hazardous Communication Standard labels for review and approval prior to the award, adhering to 29 CFR 1910.1200 and Federal Standard No. 313-E. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements, with specific storage instructions to maintain a temperature between 60 and 80 degrees Fahrenheit. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. The contract incorporates several critical federal and defense clauses, including the Buy American and Balance of Payments Program, NIST SP 800-171 assessment requirements, and safeguarding of covered defense information. Inspection and acceptance will occur at the destination point.
Adhesive Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS