Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Vacuum System Controller and Power Management Supply

Active

Federal

Response Deadline11/13/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity, managed by the Department of Defense under the FA2263 Aflcmc Romk Afmetcal agency, involves the supply of integrated electronic controllers and power distribution systems for the Air Force Metrology Calibration Program. The selected provider will deliver system controllers designed for turbomolecular and backing pumps, featuring a main interface panel and user-serviceable overcurrent protection. Technical requirements specify that the integrated system controller and power assembly must support single phase power at a nominal 115 VAC with a ten percent tolerance at 50/60 Hz. Interested parties must submit their responses by November 13, 2026, in accordance with the guidelines established under NAICS code 334419.

General Info

DoD subcontract for Air Force electronic controllers and power systems due November 13, 2026.

Agency

Department Of Defense → FA2263 Aflcmc Romk Afmetcal

NAICS

334419 - Other Electronic Component Manufacturing

Place of Performance

OH

Set-Aside

NONE

Documents

This scope was carved out of 27M-083A-VA.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Vacuum Turbo Pumps

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 14

subcontract

Response DeadlineNov 13

Submission deadline

Response Deadline

11/13/2026, 07:00:00 PM UTCin 27 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA2263 Aflcmc Romk Afmetcal

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → FA2263 Aflcmc Romk Afmetcal

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies integrated electronic controllers and power distribution systems for prime contractors on Air Force Metrology Calibration Program projects. Provides system controllers for turbomolecular and backing pumps with user-serviceable overcurrent protection and a main interface panel. Systems must support nominal 115 VAC (±10%) at 50/60 Hz, single phase power. Delivers the integrated system controller and power assembly.

Similar Contracts

Same NAICS industry code

Fixed Ceramic Dielectric Capacitor SupplierThis subcontract is for the supply of one fixed ceramic-dielectric capacitor, specifically NSN 5910-01-433-4238, to support prime contractors under the DLA Weapons Support Maritime Supply Chain. The component must be manufactured according to OEM drawings and delivered to Hill AFB, Utah. Strict adherence to MIL-STD-2073-IE and RP001 for packaging, as well as MIL-STD-129 for marking, is required. Eligible suppliers must maintain CMMC Level 2 certification and ensure full compliance with DFARS 252.204-7012. The opportunity was posted on October 16, 2026, with a response deadline of October 29, 2026. This requirement falls under NAICS code 334419 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 17 hours ago

DEADLINE

KC-46 Special Purpose Computer ManufacturerThis subcontract, managed by the Department of Defense through the Ok DLA Aviation At Oklahoma City, involves the manufacture of five Special Purpose Computers (P/N 3R2201B) for prime contractors supporting Department of the Air Force KC-46 aircraft projects. The scope of work includes the integration of component parts, final assembly, and the execution of aerospace-grade testing. To ensure compliance and quality, the contractor must utilize specialized testing rigs for KC-46 avionics and complete a Source Approval Request package in accordance with MQR-PSD-1. The final deliverables consist of five fully manufactured, tested, and certified computers. The response deadline for this opportunity is October 24, 2026.

Ok DLA Aviation At Oklahoma City

POSTED

about 22 hours ago

DEADLINE

59--SWITCH,PUSH

Solicitation # SPE7M8-27-U-0002

Solicitation SPE7M8-27-U-0002 is a request for quotations issued by the DLA Weapons Support Electrical Devices Division for the procurement of push switches, identified by NSN 5930014782741. This is a total small business set-aside that may result in a unilateral Simplified Indefinite-Delivery Contract with a one-year term and a maximum aggregate value of 350,000.00 dollars. The estimated annual demand is 11 units, with a guaranteed minimum quantity of one. The approved source for this item is Siemens Energy and Automation Inc, part number 50HA2E1. Quotes must be submitted electronically via the DLA Internet Bid Board System by October 30, 2026. Award will be based on the price quoted for the estimated annual demand and the responsibility of the offeror. Delivery is required within 35 days after order, with shipping to various CONUS and OCONUS DLA depots under FOB Destination terms. Inspection and acceptance will occur at the destination. The contractor must adhere to strict packaging and marking standards, including MIL-STD-129 for labeling and ASTM D3951 for non-hazardous commercial packaging. All payment requests and receiving reports must be processed electronically through Wide Area WorkFlow. The contract incorporates various FAR and DFARS clauses, including requirements for safeguarding covered defense information, compliance with the Buy American Act, and prohibitions on the use of covered defense telecommunications equipment.

DLA WEAPONS SUPPORT ELECTRICAL DEVICES DIV

POSTED

about 22 hours ago

DEADLINE

59--CABLE ASSEMBLY,SPECIAL

Solicitation # SPE4A6-27-T-4905

Solicitation SPE4A6-27-T-4905 is a total small business set-aside issued by the DLA Weapons Support ASC Commodities Division for the procurement of special purpose electrical cable assemblies, NSN 5995014632524. The requirement consists of two lines, with the primary line calling for 18 units to be delivered to Industries of the Blind Inc. within 284 days after order. All quotes must be submitted electronically via DIBBS by October 23, 2026. The procurement falls under NAICS code 334419 and requires compliance with ISO 9001:2015 quality standards. Key technical and administrative requirements include First Article Testing for two samples in accordance with Drawing 12465333 and MIL-HDBK-831. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific hazard labeling required for any hazardous materials per 29 CFR 1910.1200. Inspection and acceptance will occur at the origin. Contractors must utilize the Wide Area WorkFlow system for invoicing and payment. Additionally, the contract mandates compliance with the Buy American Act, the Berry Amendment, and CMMC Level 2 cybersecurity certification.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 22 hours ago

DEADLINE

Supply of Push Switches (NSN 5930-01-086-6027)This subcontract involves the manufacture or procurement of 41 specialized push switches, identified by NSN 5930-01-086-6027, for prime contractors supporting the Department of Defense DLA Weapons Support Electrical Devices Division. The supplier is required to strictly adhere to the DLA Master List of Technical and Quality Requirements and maintain compliance with MIL-DTL-28786, MIL-STD-2073-1E, and MIL-STD-129 standards. Quality assurance must be conducted through sampling per MIL-STD-1916 or ASQ H1331. The final delivery of the 41 units is designated as FOB Origin to the DLA Distribution DDSP located in New Cumberland, Pennsylvania. This effort falls under NAICS code 334419.

DLA WEAPONS SUPPORT ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Supply of Cable Breakout Adapters (NSN 5935-01-668-9632)This subcontract involves the manufacture or sourcing of eight Cable Breakout Adapters, specifically GE Aviation Systems part number 765090-006 under NSN 5935-01-668-9632. The project is managed by the Department of Defense through the DLA Weapons Support ASC Supplier Oper OEM Division. All finished units must be delivered FOB Origin to the DLA Distribution Depot Oklahoma, with the place of performance located at Tinker AFB. To ensure compliance, the contractor must maintain an ISO 9001:2015 quality system and meet CMMC Level 2 security requirements. Additionally, all items must be packaged and marked in strict accordance with MIL-STD-2073-1E and MIL-STD-129 standards. The opportunity falls under NAICS code 334419.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Supply of Push Switches (NSN 5930-01-350-1378)This subcontract involves the manufacture or sourcing of nine push switches under NSN 5930-01-350-1378 for the DLA Weapons Support Electrical Devices Division. These components are designated as Critical Application Items and must be produced in strict accordance with Reference Drawing NR 76823 DAA3293P011 and TDP Rev A Gen 1. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 334419. Compliance requirements are stringent, necessitating JCP certification and formal approval for handling export-controlled technical data under ITAR and EAR regulations. All deliverables must adhere to MIL-STD-129 and ASTM D3951 packaging standards. The response deadline for this opportunity is October 26, 2026.

DLA WEAPONS SUPPORT ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Electro-Mechanical Linear Actuator FabricationThis subcontract involves the fabrication and assembly of one Electro-Mechanical Linear Actuator for prime contractors supporting DLA Weapons Support ASC projects. The work must be performed in accordance with Reference Drawing NR 19207 57K9190 and TDP Rev A Gen 1, with a strict prohibition on the use of additive manufacturing. The final deliverable is one fully assembled and tested actuator. The Department of Defense requires the performing contractor to maintain ISO 9001:2015 certification and a CMMC Level 2 self-assessment. The project is categorized under NAICS code 334419 and will be executed in New Cumberland. Interested parties must respond by October 23, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Indicating Temperature Control Device SupplierThis subcontract, issued by the Department of Defense DLA Weapons Support ASC Supplier OEM Division, requires the manufacture or sourcing of 13 mercury-free indicating temperature control devices under NSN 6685011104478. The supplier must adhere to the DLA Master List of Technical and Quality Requirements RA001 and perform quality assurance sampling in accordance with MIL-STD-1916 or ASQ H1331. All items must be packaged and marked according to MIL-STD-2073-1E, MIL-STD-129, and RP001 standards. The completed order is to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. The response deadline for this opportunity is October 23, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Supply of Aircraft Hour Meters (NSN 4330-01-488-6470)This subcontract involves the procurement or manufacture of aircraft hour meters, specifically matching Kampi Components Co Inc Part Number 6 X 139, for prime contractors supporting the DLA Weapons Support Maritime Supply Chain. The project requires strict adherence to Critical Application Item standards and the DLA Master List of Technical and Quality Requirements RA001. Additionally, the provider must ensure full compliance with the Buy American Act and DFARS 252.204-7012 regulations. The contract is categorized under NAICS code 334419 and is managed by the Department of Defense. Performance of the contract will take place in New Cumberland, Pennsylvania. Interested parties must respond by October 26, 2026, to provide the completed aircraft hour meters as specified under NSN 4330-01-488-6470.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Precision Manufacturing of Distribution Boxes (NSN 6110-01-503-8986)This subcontract involves the precision manufacturing of 11,000 distribution boxes for the DLA Weapons Support Maritime Supply Chain. The scope of work includes the fabrication and assembly of units according to specific reference drawings and the DLA Master List of Technical and Quality Requirements. Performance will take place at Tinker AFB under NAICS code 334419. To qualify for this project, the contractor must maintain JCP certification and ensure full compliance with ITAR and EAR regulations. Additionally, strict adherence to DFARS 252.204-7012 and NIST SP 800-171 cybersecurity standards is required. The final deliverable consists of 11,000 completed distribution boxes meeting all specified technical standards.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Distribution Box Fabrication and Assembly (NSN 6110-01-528-8508)This subcontract involves the fabrication and assembly of one Distribution Box for prime contractors supporting the DLA Weapons Support Maritime Supply Chain. The manufacturer must produce the item in strict accordance with Reference Drawing NR 96906 MS35338, 16236 RE-015288508, or 18876 13154090 and TDP Rev A Gen 1. Compliance with RA001 quality requirements is mandatory, and the contractor must ensure there is no mercury contact during the production process. The project requires the contractor to possess CDI safeguarding capabilities and a completed CMMC Level 2 self-assessment. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by October 26, 2026, to provide the single completed unit under NAICS code 334419.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → FA2263 Aflcmc Romk Afmetcal

Same awarding agency

Vacuum System Integration and Field EngineerThis subcontract opportunity for a Vacuum System Integration and Field Engineer supports the Department of Defense, specifically the FA2263 Aflcmc Romk Afmetcal agency. The selected provider will be responsible for the on-site installation, system validation, and operator training for prime contractors on AFPSL vacuum system projects. Key technical requirements include installing hardware and software upgrades, verifying multiplexors and integrated systems, and utilizing NIST traceable validation equipment to ensure operational accuracy. The scope of work also involves documenting operational health hazards and safety concerns to deliver a fully validated and functional integrated system. Interested parties should note that the response deadline is November 17, 2026. The project falls under NAICS code 541330, focusing on the delivery of a turnkey operational system and a fully trained set of operators.

Engineering Services

POSTED

about 22 hours ago

DEADLINE

in about 1 month

Vacuum System Software DeveloperThis subcontract opportunity, titled Vacuum System Software Developer, is issued by the Department of Defense under the agency FA2263 Aflcmc Romk Afmetcal. The project focuses on performing software modifications and development for prime contractors working on AFPSL vacuum system projects. The scope of work includes developing software to integrate new hardware, updating system operation logic, and revising the Operator's Manual to ensure all functionality and validation requirements are met. The selected developer will be responsible for integrating control software with ion gauge controllers and multiplexors. Key deliverables for this contract include the delivery of modified code, compiled binaries, and updated technical manuals. Interested parties should note that the response deadline for this requirement is November 17, 2026, and the work falls under NAICS code 541511.

Custom Computer Programming Services

POSTED

about 22 hours ago

DEADLINE

in about 1 month

Vacuum System Component SupplierThis subcontract, managed by the Department of Defense under the FA2263 Aflcmc Romk Afmetcal agency, involves the procurement of specialized vacuum-compatible hardware and electronic controllers for AFPSL vacuum system projects. The supplier is responsible for the manufacture and delivery of physical components, including VGMS Power Supply Boxes, Interface Cables for Multiplexors, UHV-compatible 15-25 PSIG Rupture Discs, and Inficon Ion Gauge Controllers. To ensure technical precision, the contract mandates that all test equipment used must possess first echelon certification traceable to the National Institute of Standards and Technology. The opportunity was posted on October 16, 2026, with a response deadline of November 17, 2026, falling under NAICS code 334516.

Analytical Laboratory Instrument Manufacturing

POSTED

about 22 hours ago

DEADLINE

in about 1 month

Solicitation # 27M-638A-VA

The Air Force Metrology and Calibration (AFMETCAL) program office is conducting market research via a sources sought synopsis to identify capable vendors for the upgrade of a primary vacuum standard, specifically the GA-VGMS-33528 system. The scope of work involves integrating specific hardware components, including a power supply box, interface cables, a rupture disc, an Inficon ion gauge controller, and a rack rail controller panel. Additionally, the contractor must provide a software upgrade package to correct existing bugs and implement multi-channel analog calibration workflows compatible with Windows 10 or 11 LTSC. The requirement includes on-site engineering services for installation, system validation, and operator training, with final inspection and acceptance occurring at the AFPSL. This is currently a request for information and not a formal solicitation; therefore, no funds are currently available, and responses are not binding offers. Interested vendors under NAICS 334515 must provide a comprehensive capability statement, including their business size, CAGE code, SAM status, and a rough order of magnitude price for one unit over a one-year period. Technical requirements mandate that all test equipment used for validation must have first echelon certification traceable to NIST or an equivalent international laboratory. Responses are due by November 17, 2026, and should be directed to the listed contract specialists.

Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

about 22 hours ago

DEADLINE

in about 1 month

Precision Variable Leak Valve SupplyThis subcontract involves the supply of high-precision variable leak valves to prime contractors supporting the Air Force Metrology Calibration Program under the Department of Defense. The manufacturer is responsible for delivering valve units that feature a 1/3 inch OD Mini-ConFlat gas inlet port and strictly adhere to precision vacuum leak rate standards. To ensure compatibility and performance, the hardware must meet specific physical constraints, including a maximum height of 4.5 inches and a total weight not exceeding 4.0 lbs. The opportunity is categorized under NAICS code 332911 and was posted by the AFLCMC ROMK AFMETCAL agency.

Industrial Valve Manufacturing

POSTED

DEADLINE

Oil-Free Dry Scroll Backing Pump SupplyThis subcontract involves the supply of oil-free dry scroll backing pumps to prime contractors supporting the Air Force Metrology Calibration Program. Managed by the Department of Defense under the FA2263 Aflcmc Romk Afmetcal agency, the contract requires the manufacture of pumps that maintain a rotational speed of at least 56,000 RPM and achieve an ultimate pressure of 0.1 mbar or better. A critical requirement of the equipment is that it must be strictly oil-free to eliminate the risk of hydrocarbon contamination of calibration standards. The solicitation was posted on October 14, 2026, with a response deadline of November 13, 2026, falling under NAICS code 333998.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

DEADLINE

High-Vacuum Turbomolecular Pump SupplyThis subcontract involves the supply of high-performance turbomolecular pumps to prime contractors supporting Air Force Metrology Calibration Program projects under the Department of Defense. The pumps must meet rigorous technical specifications, including a minimum pumping speed of 215 L/s for Nitrogen, a vacuum pressure capability of 1 x 10^-9 mbar, and a Nitrogen compression ratio exceeding 1 x 10^-11. To ensure operational integrity, the units must be manufactured using high-vacuum grade materials and equipped with ISO-LF DN 100 high-vacuum inlet flanges. The contract was posted on October 14, 2026, with a response deadline of November 13, 2026, and is categorized under NAICS code 333998.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

DEADLINE

Vacuum Turbo Pumps

Solicitation # 27M-083A-VA

The Air Force Metrology Calibration Program (AFMETCAL) is conducting market research via a Sources Sought synopsis to identify potential providers for Turbomolecular Pumping Stations (TMPS). This acquisition aims to replace the discontinued Agilent Technologies/Varian TPS-compact TV301 to support high-vacuum and vacuum metrology calibration equipment across the Air Force. The requirement is for a fully integrated, oil-free, plug-and-play benchtop system consisting of a turbomolecular high-vacuum pump with a pumping speed of at least 215 L/s for Nitrogen, a dry scroll backing pump with a rotational speed of at least 56,000 RPM and an ultimate pressure of 0.1 mbar or better, an integrated system controller, and a separate variable leak valve. Technical specifications include an ISO-LF DN 100 high-vacuum inlet and nominal 115 VAC power requirements. The estimated quantity is 86 units over five years, and reconditioned or used materials are strictly prohibited. Interested vendors under NAICS 334515 must submit a capability statement, rough order of magnitude pricing, and detailed company information by November 13, 2026. Key requirements include a minimum two-year warranty from delivery, the provision of a COTS operator's manual, and adherence to NIST-traceable certification standards for test equipment. Each unit must be clearly labeled with the model number, serial number, manufacturer's name, and warranty expiration date. All responses should be directed to the listed contract specialists and reference 27M-083A-VA.

Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

DEADLINE

Knowledge Transfer and Documentation for Future CompetitionThe contract requires the development of comprehensive technical documentation for the LBIR facility, covering its operations, calibration procedures, and system designs to ensure a smooth transition and enable future competition. The deliverables must be detailed enough to support knowledge transfer to new operators or contractors, ensuring continuity of function, maintenance, and technical integrity without reliance on current institutional knowledge. All documentation must be precise, standardized, and structured to facilitate understanding by technical personnel unfamiliar with the facility. This subcontract is tied to the Department of Defense through the agency FA2263 Aflcmc Romk Afmetcal and is focused on work performed in Gaithersburg. The North American Industry Classification System code 541611 indicates it is related to scientific and technical consulting services, specifically management and technical consulting. Although the solicitation number is not provided, the contract was posted on July 30, 2026, signaling preparatory activity ahead of anticipated future procurement cycles. The documentation produced under this effort will serve as a foundational asset for any subsequent vendor or team taking over facility operations, emphasizing clarity, completeness, and technical accuracy.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

IT and Network Security Support for NIST-Compliant SystemsThe contract entails providing comprehensive IT and network security support to maintain and protect computer systems, networks, and data infrastructure in strict alignment with NIST SP 800-series security standards, ensuring the continued operational integrity of the LBIR facility. The scope focuses on implementing, monitoring, and updating security controls to safeguard sensitive information and infrastructure against evolving cyber threats, with an emphasis on compliance, resilience, and continuous improvement of security postures. This is a subcontract under the Department of Defense, specifically managed by FA2263 Aflcmc Romk Afmetcal, with performance taking place in Gaithersburg. The North American Industry Classification System code 541512 indicates the work falls under computer systems design and related services. The opportunity was posted on July 30, 2026, and is accessible via the SAM.gov platform, though no set-aside designation or point of contact details are provided. The contractor is expected to deliver expert-level security services that meet federal cybersecurity requirements without deviation, supporting critical defense-related operations.

Computer Systems Design Services

POSTED

DEADLINE

Optical and Radiometric Systems Engineering SupportThe contract seeks engineering support for the development and optimization of low-background infrared measurement systems used in radiometric calibration, with a focus on optical design, alignment precision, and performance enhancement. The work involves advanced technical expertise in infrared optics to ensure systems meet stringent calibration standards, minimizing background noise and maximizing measurement accuracy for critical defense and scientific applications. The contractor will be responsible for iterative design improvements, system-level testing, and collaboration with technical teams to achieve optimal radiometric outcomes. This subcontract is issued under the Department of Defense through the agency FA2263 Aflcmc Romk Afmetcal, with performance located in Gaithersburg. The work falls under the NAICS code 541715, indicating it is centered on research and development in physical, engineering, and life sciences. The contract was posted on July 30, 2026, and is intended to support specialized instrumentation needs where high-sensitivity infrared measurements are essential for calibration integrity. No set-aside provisions are specified, and the procurement remains open to qualified subcontractors capable of delivering high-precision optical engineering solutions.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

Cryogenic and Vacuum System MaintenanceThe contract requires the operation and maintenance of ultra-high vacuum cryogenic systems at the LBIR facility in Gaithersburg, encompassing vacuum chambers, cryocoolers, and associated cleanroom infrastructure. These systems demand specialized expertise to ensure continuous, reliable performance under extreme conditions, with strict adherence to technical specifications and safety protocols to preserve experimental integrity and facility usability. The work involves routine servicing, troubleshooting, calibration, and preventive maintenance to sustain operational readiness and mitigate downtime. The contract is classified as a subcontract under NAICS code 811310, indicating it falls within the industrial and commercial equipment repair and maintenance sector. It is managed by the Department of Defense through the agency FA2263 Aflcmc Romk Afmetcal, with performance localized to Gaithersburg. The solicitation was posted on July 30, 2026, and execution will require close coordination with facility personnel, compliance with federal and defense-specific standards, and likely clearance of access protocols given the sensitive nature of the facility and its operations.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS