Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

VALVE, AIR SHUTDOWN

Active
SPE7MC-26-T-163UFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of four air shutdown valves with NSN 4820-15-011-3048 and part number 057.08007-REV 3.0 from ISOTTA FRASCHINI MOTORI SPA, supplied under solicitation SPE7MC-26-T-163U. The valves must meet all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, which is incorporated by reference and controlled by the revision in effect on the solicitation issue date. Delivery is required FOB origin within 158 days of contract award, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and unit containment codes, with marking in accordance with MIL-STD-129 and no special marking required. Palletization must follow DLA packaging standards, and the delivery address is the DDSP New Cumberland Facility in New Cumberland, Pennsylvania. The purchase price is $4.00 per unit, totaling $16.00 for the four units. The solicitation was posted on August 2, 2026, with a response deadline of August 13, 2026, and the contract falls under NAICS code 336310 for aerospace product and parts manufacturing. The point of contact is Paula Mcclary, reachable via email and phone.

General Info

Four air shutdown valves procured at $4 each, FOB origin, delivery in 158 days to Pennsylvania, compliant with MIL-STD and DLA standards.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

336310 - Motor Vehicle Gasoline Engine and Engine Parts ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7MC-26-T-163U for Maritime Hardware/Electrical

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DDSP NEW CUMBERLAND FACILITY
View Agency Profile
Office AddressUS
Contacts
Paula Mcclary
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
VALVE,AIR SHUTDOWN
VALVE<(>,<)> AIR SHUTDOWN
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
ISOTTA FRASCHINI MOTORI SPA A0106 P/N 00E77800C
ISOTTA FRASCHINI MOTORI SPA A0106 P/N 057.08007-REV 3.0 ITEM 1
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017602733 0001 EA 4.000
NSN/MATERIAL:4820150113048
DELIVERY (IN DAYS):0158
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:31 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:CA CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:D3 OPI:O
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
SPE7MC-26-T-163U
SECTION B
PR: 7017602733 PRLI: 0001 CONT’D
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:01/19/2027 Original Required Delivery Date:05/24/2027
SPE7MC-26-T-163U NSN/Part Number: 4820-15-011-3048 Quantity: 4 EA Purchase Request: 7017602733QTY: 4 Delivery: 158 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336310
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-905P
The contract pertains to the procurement of O-RINGS with NSN 5331-01-652-8142, requiring delivery of 74 units under solicitation SPE7L1-26-T-905P. The item is classified as a Type I shelf-life item with a non-extendable 60-month shelf life, subject to strict traceability and packaging requirements under DLA directives including DLAD Procurement Note C03 for supply chain documentation retention and MIL-DTL-117 Type II Class C Style 1 for opaque, waterproof, greaseproof packaging to protect against UV degradation. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, including the special code 32 indicating Type I shelf life, and palletization must follow DLA Packaging Requirements for Procurement. Delivery is FOB origin with no quantity variance, inspection and acceptance occur at destination, and shipment must be completed within 103 days by November 25, 2026. The item is designated as non-surplus acceptable, and all technical and quality standards referenced, including those identified by R and I numbers, are governed by the DLA Master List. Transportation logistics adhere to DLAD Procurement Notes C19 and C20, with delivery directed to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract is governed by DoD unit of issue standards and incorporates applicable defense information handling requirements under RD003.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336310
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-903Q
This contract is for the procurement of one O-RING with NSN 5331-01-670-1894 under solicitation SPE7L1-26-T-903Q, with a response deadline of August 13, 2026, and a required delivery within five days of award. The item must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on the acquisition type. Packaging must adhere to DLA standards, and all supplies must be stripped of government identification if not accepted. Documentation for source approval must meet RC001 criteria, and the contract prohibits the use of Class I ozone-depleting chemicals entirely, overriding any conflicting specification requirements while still enforcing product performance standards; alternative chemicals require prior approval. The item must also be completely free of asbestos, with any prior asbestos-containing codes or parts deemed unacceptable, and substitutions must undergo approval per Clause L30 and Provision 4 conditions. Covered defense information protections apply, and performance is to occur in Johnston, Iowa, with Kristina Derry at DLA as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336310
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-905E
The contract pertains to the procurement of an O-RING with NSN 5331-01-680-0251 and part numbers 1000433217 and 2463-016238S-6503, for a quantity of nine units, under solicitation SPE7L1-26-T-905E. Delivery is required FOB origin within 213 days of contract award, with no variance permitted in quantity, and inspection and acceptance occur at the destination. Packaging must adhere strictly to MIL-DTL-117, Type II, Class C, Style 1, using a medium-duty, waterproof, greaseproof, and opaque bag to protect against UV degradation, a requirement applicable to direct vendor delivery, foreign military sales, and stock shipments. The item must also be marked in compliance with MIL-STD-129 with the special marking code “20–20 Do Not Bend,” and palletization must follow DLA packaging standards. Technical and quality requirements are governed by the DLA Master List, with configuration change management, cybersecurity certification at CMMC Level 2, and removal of government identification procedures also applicable. The supplier must comply with SAE AS9100 quality standards and documentation requirements for source approval, while transportation and shipping are directed to the DLA Distribution facility in New Cumberland, Pennsylvania, in accordance with specific DLA procedural notes. The contract is subject to federal supply classifications and requires alignment with DoD unit of issue standards.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336310
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-903F
The contract pertains to the procurement of one O-ring identified by NSN 5331-99-549-5804 and part number 2301/1006 from J.C. BAMFORD EXCAVATORS LIMITED, under solicitation SPE7L1-26-T-903F. The item must be delivered in five days FOB origin with no quantity variance allowed and is subject to inspection and acceptance at the destination. Packaging must comply with MIL-DTL-117, Type II, Class C, Style 1, requiring a medium-duty, waterproof, greaseproof, opaque bag to protect against UV degradation, and labeling must adhere to MIL-STD-129 without special marking. Packaging and preparation follow MIL-STD-2073-1E with specific preservation methods, and palletization aligns with DLA’s standard requirements. The delivery destination is W50EA0 at 201 SCHAFER DRIVE, RONKONKOMA NY 11779-7353, with shipment required via traceable means excluding parcel post. Technical and quality requirements referenced by R and I numbers are governed by the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition type. Documentation for source approval and handling of covered defense information also applies, and all units are issued per DoD standards with a single unit price of one dollar, totaling one dollar for the order. The contract is issued by the Department of Defense’s Land Supply Chain with Kristina Derry as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336310
New
DIBBS
CAP, FILLER OPENING
Solicitation # SPE4A5-26-T-319F
RTX CORPORATION is contracted to supply four units of CAP, FILLER OPENING with NSN 2910-01-732-8686 under solicitation SPE4A5-26-T-319F, with a total price of $4.000 per unit and no variance allowed in quantity. Delivery is required within 20 days from the contract date, with FOB ORIGIN terms, meaning the buyer assumes responsibility for freight and risk once the item leaves the supplier’s facility. Inspection and acceptance occur at the destination, and packaging must strictly comply with MIL-STD-2073-1E, including specific preservation methods, wrapping, and container standards. Marking follows MIL-STD-129 with no special codes, and palletization adheres to DLA’s RP001 requirements. The delivery destination is Assault Craft Unit 4 at 2155 11th Street, Virginia Beach, VA, with RDD 777 and a mandatory requirement to ship via the fastest traceable means, expressly prohibiting parcel post. The original required delivery date is July 10, 2026, and the contracting office is the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION, with Koonj Spicer listed as the primary point of contact. The contract is classified under NAICS code 336310 and remains for government use only.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336310
New
DIBBS
PRODUCTION LOT TESTING
Solicitation # SPE7L1-26-T-904S
The contract requires the contractor to perform Production Lot Testing for NSN 0001S00000062, with a total quantity of 1,162 units, under solicitation SPE7L1-26-T-904S, with a response deadline of August 13, 2026, and a delivery timeline of 174 days after contract award. The test report must be labeled with the contract number and lot/item number as specified, and must be presented to the Quality Assurance Representative for review. All shipments of Production Lot Test Reports must be accompanied by signed DD Form 1222 and DD Form 250 or iRAPT receiving documentation, a copy of the contract or order, all applicable test reports showing actual results and approved tolerances, material and process certifications, operation and inspection method sheets, and the manufacturing drawings used for the test sample, with appropriate markings to control public disclosure and limit government use as necessary. The work is performed under a federal procurement managed by the Department of Defense, Land Supply Chain, with the place of performance located in New Cumberland, Pennsylvania, 17070-5002, and the primary point of contact is Chelsea Cunningham, reachable via email and phone provided.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336310
New
DIBBS
Supply of 5KW Service Kits (NSN: 2940016273978)The contract specifies the manufacture and delivery of two 5KW service kits identified by NSN 2940016273978, intended for military use under the oversight of the Defense Logistics Agency, a component of the Department of Defense. The kits must comply with DPAS regulations and are designated for expedited handling to meet urgent operational requirements. The work falls under NAICS code 336310, classifying it within the aerospace product and parts manufacturing sector, and is structured as a subcontract, indicating it supports a larger procurement initiative. Although the solicitation number and specific point of contact are not provided, the performance location and recipient details remain unspecified, with the delivery and execution managed through the DLA’s procurement system. The contract was posted on August 1, 2026, and the details are accessible via the DIBBS portal for tracking and fulfillment purposes.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 336310
New
DIBBS
Supplier for Other Contracted NSNs (Bulk Opportunity)The contract pertains to the supply of additional National Stock Numbers encompassing engine components, gaskets, filters, and fluid systems within a broad scope of 9,304 items, aimed at supporting logistical needs under a subcontract arrangement. It is issued by the Defense Logistics Agency under the Department of Defense, classified under NAICS code 336310 which corresponds to aerospace product and parts manufacturing, indicating the specialized nature of the supplied items. The solicitation is posted for future performance with no set-aside designation, and while the specific place of performance and point of contact are not detailed, the contract is accessible through the DIBBS system via a unique identifier linked to the award and delivery details. The opportunity is open for suppliers to fulfill bulk procurement requirements for critical maintenance and operational support parts, ensuring readiness and availability across military systems. Although the solicitation number is not provided, the contract reference and award details are traceable through the official DIBBS portal, allowing qualified vendors to engage with the procurement process in preparation for the August 2026 posting date. The absence of geographic or organizational set-asides suggests a competitive, open bidding environment targeting capable manufacturers and distributors with the capacity to deliver large volumes of standardized military-grade components reliably and on schedule.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 336310
New
DIBBS
Diesel Engine Supply and NSN FulfillmentThe contract involves the supply of diesel engines and related components under National Stock Numbers to fulfill military requirements, encompassing full production, rigorous testing, proper packaging, and timely delivery in strict adherence to Department of Defense specifications. The work is governed under NAICS code 336310 and executed as a subcontract under the Defense Logistics Agency, ensuring alignment with military standards for performance, reliability, and interoperability across defense systems. All deliverables must be fully compliant with prescribed military specifications, with quality assurance embedded throughout the manufacturing and inspection processes. The contract does not specify a set-aside type or a designated point of contact, and performance is expected to occur within the operational framework of the Department of Defense, without a defined geographic delivery location. The procurement is managed through the DLA’s systems, with the award linked to a specific contract and delivery identifier for traceability and accountability.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 336310
New
DIBBS
Engine Component & Spare Parts Manufacturing
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 336310
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-823H
This contract specifies the procurement of an O-RING with part number KRP203321V-ORING and NSN 5331016878523, requiring a quantity of 176 units to be delivered FOB origin within 44 days of award. The item is classified as a Type I shelf-life item with a non-extendable lifespan of 180 months, governed by RS039 and identified by special marking code 32. All packaging must comply with MIL-STD-2073-1E and MIL-DTL-117, Type II, Class C, Style 1, ensuring the product is sealed in a medium-duty, waterproof, greaseproof, and opaque bag to protect against UV degradation, applicable to direct vendor delivery, foreign military sales, and stock shipments. Marking and palletization must follow MIL-STD-129 and DLA packaging requirements. The delivery destination is DLA Distribution San Diego, with the same address used for freight shipping and parcel post. Inspection and acceptance occur at the destination with zero variance permitted in quantity. The contract references technical and quality standards from the DLA Master List and incorporates requirements for hazardous materials packaging and transportation as per IP025 and DLAD Proc Note C19/C20. The solicitation was issued under SPE7L1-26-T-823H with a response deadline of July 20, 2026, and an original required delivery date of February 3, 2027, though the needed ship date is set for September 3, 2026.
LAND SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 336310
New
DIBBS
INJECTOR ASSEMBLY, FUEL
Solicitation # SPE7L2-26-Q-0009
The contract pertains to the procurement of a Fuel Injector Assembly identified by NSN 2910-01-727-8637 and part number 55510920, supplied by GM Defense LLC under solicitation SPE7L2-26-Q-0009. The item is classified as a Commercial Off the Shelf (COTS) product with no shelf life requirement, and the contract mandates strict compliance with DLA’s technical and quality standards as outlined in the DLA Master List of Technical and Quality Requirements. The use of Class I ozone-depleting chemicals is completely prohibited, superseding any conflicting specification requirements, and any substitute chemicals must be submitted for approval unless explicitly authorized. The product must be packaged in accordance with MIL-STD-2073-1E and marked per MIL-STD-129 with no special marking code, with palletization following DLA Packaging Requirements. The contract specifies a Firm Fixed Price term with no variance allowance, requiring delivery of exactly three units within 90 days after award. Inspection and acceptance occur at the destination, with FOB origin terms applying. Delivery is to the DLA Distribution facility in New Cumberland, PA, and transportation procedures must adhere to DLAD Proc Notes C19 and C20. Pricing is structured in quantity tiers with applicable prices for ranges of 4–5, 6–10, and 11–15 units, though actual order quantity is fixed at three units. The material need date is October 1, 2026, and the solicitation response deadline was August 7, 2026. The NAICS code is 336310, and the primary point of contact is Shaun Sehgal of the Department of Defense, Land Supplier Opns Wheeled Vehicles.
LAND SUPPLIER OPNS WHEELED VEHICLES

POSTED

2 days ago

DEADLINE

in 5 days
View Details

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

NAICS: 332911
New
DIBBS
VALVE, BALL
Solicitation # SPE7MC-26-T-163R
The contract specifies the procurement of a single ball valve with NSN 4820-01-707-6576 and part number 21B3ET-SWO-200-02CB from ALLOY VALVES & CONTROL, INC., under solicitation SPE7MC-26-T-163R. The item must be delivered within 213 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with FOB origin terms and no tolerance for quantity variance. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and the valve must not contain any Class I ozone-depleting chemicals, with any substitutes requiring prior approval unless explicitly authorized by specifications. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, using designated methods and materials, and palletization must adhere to DLA packaging standards. The valve is to be inspected and accepted at the destination point, and transportation logistics follow DLA procedural guidelines C19 and C20. The solicitation was posted on August 2, 2026, with a response deadline of August 13, 2026, under NAICS code 332911, indicating classification for other fabricated metal product manufacturing. The contract is issued by the Department of Defense through the DDSP New Cumberland Facility, with Paula McClary listed as the primary point of contact. The unit of issue is each (EA), and the total price reflects a single unit at the listed unit price. No special marking is required beyond standard MIL-STD-129 compliance, and the designated shipping and delivery address is consistent with the DLA distribution center in Pennsylvania. The required delivery date is March 15, 2027, aligning with the original need date and confirming the strict adherence to timeline requirements.
Industrial Valve Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
BALL, VALVE, PORTED
Solicitation # SPE7MC-26-T-164G
The contract pertains to the procurement of two ported ball valves, identified by NSN 4820014178455 and part number HBV-WF3-14-0007-05, supplied by B N L Industries Inc, under solicitation SPE7MC-26-T-164G. The total contract value is $2.00 for the two units, with delivery required 144 days after order placement, no later than February 22, 2027, and FOB origin terms apply. All items must be delivered to the DLA Distribution facility at 2083 Normandy Drive, Door 113 to 134, New Cumberland, PA 17070-5002, and are subject to final inspection and acceptance at the destination. Packaging must strictly comply with MIL-STD-2073-1E, including air evacuation preservation, plastic film wrapping, and use of D3 unit containers and E5 intermediate containers, with no cushioning or preservative materials needed. Marking must adhere to MIL-STD-129 with no special codes required, and palletization must follow DLA’s RP001 packaging requirements. The valve is designated as a critical application item, and the contract prohibits the use of class I ozone-depleting chemicals, as well as any intentional addition of mercury or mercury-containing compounds except in specific exempted applications such as batteries, fluorescent lights, sensors, weapon systems, or Navsea-specified reagents; portable devices containing mercury must include a second containment barrier and be shock-proof per NAVSEA 5100-003D. Compliance with the DLA Master List of Technical and Quality Requirements is mandatory, and all representations and certifications must be submitted via the DIBBS portal by August 13, 2026. The contract includes numerous FAR and DFARS clauses covering equal opportunity, combating trafficking, employment verification, sustainable products, hazardous material identification, cybersecurity safeguards including NIST SP 800-171, prohibition of hexavalent chromium, export control, electronic invoicing via WAWF, and restrictions on covered defense telecommunications equipment from Communist Chinese military companies. Payment must be processed electronically through WAWF using the DD 1155 form, and the Unique Entity ID (UEI) and CAGE code of the vendor must be provided. No quantity variance
Industrial Valve Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
DIBBS
CHARGER, BATTERY
Solicitation # SPE7L7-26-T-4534
This contract specifies the procurement of 13 battery chargers under NSN 6130-01-681-7918 with a total quantity of 13 units to be delivered FOB destination within 131 days, by December 23, 2026. The product is identified as the NOCO Company model GB500 with part number 54095, and delivery must comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements. Packaging and palletization must adhere to DLA packaging requirements, with no quantity variance permitted. Inspection and acceptance occur at the destination, and all items must be marked according to specified protocols, including the use of special marking codes and compliance with hazardous materials shipping procedures. Sampling and quality verification follow MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively, or AQLs of 0.1, 1.0, and 4.0. Zero non-conformances are required in sampling unless otherwise stated. Technical and quality requirements are governed by the DLA Master List, with revisions controlled by solicitation or award dates depending on acquisition size. The contract includes detailed shipping instructions to the DLA Distribution facility in New Cumberland, Pennsylvania, and references applicable DLA procedural notes for transportation. All requirements are tied to the solicitation number SPE7L7-26-T-4534 and subject to DLA’s official unit of issue guidelines.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SAFETY RELIEF
Solicitation # SPE7MC-26-T-164P
The contract specifies the procurement of a safety relief valve with a bronze body, a pressure setting range of 13 to 23 PSI, and a maximum pressure rating of 400 PSI, identified by part number BASAA03SBB and NSN 4820-01-433-9858. Manufacturing is to be accomplished via metal casting, requiring specialized tooling, and suppliers must coordinate with DLA’s Aviation or Land & Maritime Supply Chains for tooling and material sourcing. The item is designated as a critical application item, and strict compliance with DLA packaging, marking, and preservation requirements is mandatory, including adherence to MIL-STD-2073-1E and MIL-STD-129. Mercury and mercury-containing compounds are strictly prohibited in the product, packaging, preservation, and marking, except for limited functional uses under specific naval exceptions, which must include secondary containment. The contract requires delivery of 30 units within 121 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with FOB origin terms and zero variance tolerance on quantity. Packaging must use approved preservation methods and materials, with no hazardous substances permitted. The contract is issued under solicitation SPE7MC-26-T-164P, with a response deadline of August 13, 2026, and is governed by applicable DLA technical and quality standards referenced from the DLA Master List.
Industrial Valve Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
DISK, VALVE
Solicitation # SPE7MC-26-T-163T
The contract specifies the procurement of two valve disks and valve poppets with part number 155952-0001 and 155952-1 from Marotta Controls Inc, identified by the NSN 4820-00-959-9854 under solicitation SPE7MC-26-T-163T. Delivery is required within 158 days, with goods to be shipped FOB origin and no variance allowed in quantity. All items must comply with DLA packaging requirements per RP001 and MIL-STD-2073-1E, including specific packaging methods, containment codes, and identification markings in accordance with MIL-STD-129. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with the same address designated for freight shipping. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the supplied hardware, except for functional uses in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment barrier per NAVSEA 5100-003D. Inspection and acceptance occur at destination, and the items are classified as critical application items. The contract incorporates all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers. The solicitation was posted on August 2, 2026, with a response deadline of August 13, 2026, and the original required delivery date is April 21, 2027, though the needed ship date is set for January 19, 2027. Unit of issue is each, with a total price of $2.00 per unit, and NAICS code 332911 applies. All packaging, marking, and transportation must adhere to DLA procedural notes C19 and C20.
Industrial Valve Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
VALVE, CHECK
Solicitation # SPE7MC-26-T-163X
The contract pertains to the procurement of two check valves, part number CAV5841SSVT.500SS with NSN 4820-01-536-0829, under solicitation SPE7MC-26-T-163X, issued by the Department of Defense through the DDSP New Cumberland Facility. The unit price is $2.00 per unit, totaling $4.00 for the two required units, with delivery mandated within 188 days from the award date and FOB origin. No variance in quantity is permitted, with inspection and acceptance occurring at the destination. The valves must comply with all applicable technical and quality requirements from the DLA Master List of Technical and Quality Requirements, which take precedence over ASTM D3951. Packaging must adhere strictly to MIL-STD-129 labeling and DLA Packaging Requirements, including palletization as defined in RP001, and all items must be prepared for delivery in accordance with these standards. The delivery destination is specified as the DDSP New Cumberland Facility in Pennsylvania, with the same address used for freight shipping. The need ship date and original delivery date are both February 18, 2027, and transportation logistics must follow DLAD Proc Notes C19 and C20. The contract also includes provisions for handling covered defense information and requires removal of government identification from non-accepted supplies.
Industrial Valve Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
VALVE, REGULATING, FL
Solicitation # SPE7MC-26-T-164L
This contract specifies the procurement of a fluid pressure regulating valve, identified by NSN 4820-01-490-5956 and part numbers 035289 and 085174 from SAUER COMPRESSORS USA, INC., with a quantity of six units to be delivered within 158 days under solicitation SPE7MC-26-T-164L. Delivery is FOB origin with zero variance allowed in quantity, and inspection and acceptance occur at the destination. The item is classified as a critical application component, and strict packaging requirements mandate compliance with MIL-STD-2073-1E and MIL-STD-129, using unit containers D3 and packaging code U, with no special marking required. All packaging and preservation methods must exclude mercury or mercury compounds, consistent with IP056 and NAVSEA 5100-003D, except where functional use in batteries, lighting, instruments, sensors, weapon systems, or specified chemical reagents is explicitly permitted. Transportation and delivery are directed to the DLA Distribution facility in New Cumberland, Pennsylvania, with the original delivery deadline set for May 4, 2027, though the need ship date is January 19, 2027. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The unit of issue is each (EA), with a单价 of $6.00 and total value of $36.00, and all compliance obligations are tied to federal procurement standards under the Department of Defense.
Industrial Valve Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
VALVE, LINEAR, DIRECTION
Solicitation # SPE7MC-26-T-164H
The contract is for the procurement of a linear directional control valve, identified by NSN 4820-01-646-2864 and part number NF3PAN52ON00000, with a quantity of nine units to be delivered FOB origin within 191 days, with a required ship date of February 21, 2027. The product must comply with all technical and quality specifications listed in the DLA Master List of Technical and Quality Requirements, and packaging must adhere to MIL-STD-2073-1E and DLA packaging standards including MIL-STD-129 marking with no special marking codes. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the valve unless part of functional components like batteries, sensors, or instruments as specified by NAVSEA, and any portable devices containing mercury must have shock-proof construction and a second containment boundary per NAVSEA 5100-003D. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation and shipping instructions governed by DLA procedural notes C19 and C20. The purchase request number is 7017696020 with a unit price of $9.00 per unit, totaling $81.00, and the contract solicitation number is SPE7MC-26-T-164H with a response deadline of August 13, 2026. All supplies must be furnished without government identification if not accepted, and the contract is subject to zero tolerance for quantity variance.
Industrial Valve Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
DISK, VALVE
Solicitation # SPE7MC-26-T-163Z
The contract is for a DISK, VALVE with a NSN of 4820-01-387-9567 and a quantity of two units, under solicitation number SPE7MC-26-T-163Z. The item is a 10,000-inch diameter disk assembly made of nickel alloy, designed for use with gas, oil, or water media, and must be supplied by a CMMC Level 2 certified third-party assessment organization. All technical data associated with the item is subject to export controls under either ITAR or EAR, meaning any disclosure or transfer to foreign persons, regardless of location, requires prior authorization from the Department of State or Commerce. Compliance with DFARS 252.225-7048 is mandatory, and access to this controlled data is restricted to DLA contractors who hold a valid US/Canada Joint Certification Program credential, have completed required DOD export control training and the DLA questionnaire, and have received explicit approval from the DLA controlling authority. The delivery deadline is 158 days after award, with the place of performance located in New Cumberland, Pennsylvania, and the award is managed by the Department of Defense through the DDA New Cumberland Facility. The solicitation was posted on August 2, 2026, with bids due by August 13, 2026, and the NAICS code is 332911 for other miscellaneous fabricated metal product manufacturing.
Industrial Valve Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
DIBBS
ADAPTER, BATTERY CHA
Solicitation # SPE7L7-26-T-4537
This contract pertains to the procurement of 13 units of a commercial off-the-shelf battery charger adapter, identified by part number BTA-70100-148 and NSN 6130-01-706-9251, manufactured by BREN-TRONICS DEFENSE LLC. The item is classified as COTS with adequate catalog data available for evaluation, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, which supersede any conflicting standards. Sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise specified in the contract, and attribute classifications must adhere to predefined verification levels or AQLs. All packaging must conform to MIL-STD-129 and ASTM D3951, with palletization following DLA’s RP001 packaging requirements, and all items must be properly marked and labeled per RQ017. Delivery is FOB origin, with inspection and acceptance occurring at destination, and the full quantity of 13 units must be delivered within 115 days of contract award, with no variance permitted in quantity. The sole delivery point is the DLA Distribution facility at DDSP New Cumberland, Pennsylvania, as specified in the parcel post and freight shipping addresses. The unit of issue is each (EA), and the total contract value is based on a unit price of $13.00 per item. The procurement follows DoD unit of issue standards and is subject to DLA procedural notes C19 and C20 regarding transportation. The solicitation was issued under SPE7L7-26-T-4537 with a response deadline of August 13, 2026, and the required ship date is December 7, 2026, with the coverage of Covered Defense Information potentially applying per RD003.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
DISK, VALVE
Solicitation # SPE7MC-26-T-163Y
The contract pertains to the procurement of a DISK, VALVE assembly with NSN 4820-01-388-0662, comprising a hinge, washer, nut, pin, and disk, with a total quantity of 11 units to be delivered within 225 days of award. The solicitation, issued under number SPE7MC-26-T-163Y and posted on August 2, 2026, with a response deadline of August 13, 2026, is classified under NAICS code 332911 and is managed by the Department of Defense’s DDSP New Cumberland Facility. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition type. The item is subject to export control under ITAR or EAR, restricting disclosure of technical data to foreign persons without prior authorization from the Department of State or Department of Commerce, and DFARS 252.225-7048 applies. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program certification, completion of required DOD export control training and questionnaires, and explicit approval from DLA. The point of contact for inquiries is Paula Mcclary, reachable via email and phone provided.
Industrial Valve Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
DIBBS
CHARGER, BATTERY
Solicitation # SPE7L7-26-T-4533
The contract is for the procurement of 78 units of a charger and battery with NSN 6130-01-706-1846 under solicitation SPE7L7-26-T-4533, issued by the Department of Defense through the DDSP New Cumberland Facility. Delivery is required within 52 days of award, with FOB origin terms, and inspection and acceptance will occur at the destination. The unit of issue is each (EA), with a fixed quantity and zero variance allowed. The contract mandates strict compliance with the DLA Master List of Technical and Quality Requirements, which override all other standards including ASTM D3951. Packaging must conform to MIL-STD-129 and RP001 packaging guidelines, with all items marked and labeled accordingly. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331, Table 1 using zero-defect acceptance criteria unless otherwise specified, with critical, major, and minor attributes assigned corresponding verification levels. Physical identification of individual items must adhere to RQ017 requirements. The delivery destination is DLA Distribution at 2083 Normandy Drive, New Cumberland, PA, with a required ship date of October 5, 2026. Payment is set at $78.00 per unit, totaling $6,084.00, and the procurement is subject to all applicable DLA transportation and logistics directives including DLAD PROC NOTES C19 and C20.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details