Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

VALVE AND PIN PILOT

Active
SPE4A5-26-T-336NFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of one Valve and Pin Pilot, identified by NSN 2915-00-981-1828 and part number 552567, manufactured by ONTIC ENGINEERING & MANUFACTURING, INC. The item is classified as a critical application item under solicitation SPE4A5-26-T-336N, with a delivery requirement of 166 days from award, to be shipped FOB origin and inspected and accepted at the destination. Packaging must comply with MIL-STD-2073-1E and marking must adhere to MIL-STD-129 with no special markings required. Palletization follows DLA’s packaging guidelines and the item is to be delivered to DLA Distribution Depot Oklahoma at Tinker AFB. The contract imposes tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers, and incorporates technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements. Sampling must follow MIL-STD-1916, ASQ H1331, or another zero-based plan, with unspecified attributes treated as major and verification levels or AQLs assigned accordingly. The supplier must comply with cybersecurity requirements at CMMC Level 2 via self-assessment and is subject to DFARS provisions regarding covered defense information and the removal of government identification from non-accepted supplies. Unit of issue is each (EA), with no quantity variance permitted. The delivery deadline is October 30, 2027, with a need ship date of January 31, 2027. Document control, measuring and test equipment compliance, and source approval documentation are also required under the contract terms.

General Info

Procure one Valve and Pin Pilot NSN 2915-00-981-1828, deliver to Tinker AFB by October 30, 2027, CMMC Level 2 compliant.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

336412 - Aircraft Engine and Engine Parts ManufacturingView NAICS

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, US

Set-Aside

NONE

Documents

(1)

SPE4A5-26-T-336N.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUS
Contacts
AVIS BINFORD
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
VALVE AND PIN PILOT
VALVE AND PIN PILOT
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RD002, COVERED DEFENSE INFORMATION APPLIES
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SPE4A5-26-T-336N
SECTION B
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RT001: MEASURING AND TEST EQUIPMENT
CRITICAL APPLICATION ITEM
ONTIC ENGINEERING & MANUFACTURING, INC 45934 P/N 552567
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017741153 0001 EA 1.000
NSN/MATERIAL:2915009811828
DELIVERY (IN DAYS):0166
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
SPE4A5-26-T-336N
SECTION B
PR: 7017741153 PRLI: 0001 CONT’D
FREIGHT SHIPPING ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
Need Ship Date:01/31/2027 Original Required Delivery Date:10/30/2027
SPE4A5-26-T-336N NSN/Part Number: 2915-00-981-1828 Quantity: 1 EA Purchase Request: 7017741153QTY: 1 Delivery: 166 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336412
New
DIBBS
SEAL, ENGINE STARTER
Solicitation # SPE7M4-26-T-326Z
This contract pertains to the procurement of 58 units of a SEAL, ENGINE STARTER with NSN 2995-00-939-8495, supplied by EATON AEROSPACE, LLC under part number 608593. The item is designated as a critical application and must comply with stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, which take precedence over all other standards including ASTM D3951. Quality conformance is governed by TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS and QUALITY CONFORMANCE INSPECTION REQUIREMENTS, with inspection sampling mandates following MIL-STD-1916 or ASQ H1331 using zero-defect acceptance criteria unless otherwise specified. The contract enforces CMMC Level 2 cybersecurity requirements and mandates strict adherence to MIL-STD-129 for labeling and packaging, with palletization compliant with DLA packaging standards. Delivery is FOB origin with a 47-day lead time, and inspection and acceptance occur at the destination. The unit of issue is each (EA), priced at $58.00 per unit, with no variance allowed in quantity. All packaging must be marked and stored per specified protocols, and the items must be delivered to DLA Distribution Cherry Point in North Carolina by the required delivery date of February 19, 2027.
FLUID HANDLING DIVISION

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 336412
New
DIBBS
COVER, PACKING
Solicitation # SPE4A5-26-T-337K
Offerors must comply with strict domestic sourcing requirements including the Berry Amendment, Buy American Act, and related DFARS clauses, with the Berry Amendment threshold lowered to $150,000; non-domestic materials require explicit disclosure. The solicitation prohibits the provision of covered telecommunications equipment or services as defined by FAR 52.204-24 and DFARS 252.204-7016. Small business joint ventures must submit specific representations for eligibility under designated small business categories. All contractors must register through DLA’s new AMPS system within two months to gain access to the Vendor Shipment Module, with WebServices users required to update their internal schema to avoid disruption. Offers may not include items produced via additive manufacturing unless specifically approved in advance. Quoters are strongly encouraged to provide quantity ranges due to fluctuating demand on open purchase requests, enabling buyers to adjust quantities without re-solicitation. Fast Pay is not applicable. Offerors unable to submit a bid by the closing date must file a “No Bid” on DIBBS with an anticipated quote date or reason, ensuring transparency and avoiding unnecessary administrative follow-up. The solicitation is for 10 units of COVER, PACKING with NSN 2840-00-159-0826, delivery due in 166 days at Cherry Point, NC, with Koonj Spicer as the primary point of contact.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 336412
New
DIBBS
HOUSING, ENGINE DRIV
Solicitation # SPE7M0-26-Q-1164
The contract pertains to the procurement of one unit of a housing component for an engine drive, identified by NSN 2995-00-929-0676 and manufacturer part number 318524 from Eaton Aerospace, LLC. It is classified as a critical application item with a firm fixed price structure and zero tolerance for quantity variance, requiring delivery within 30 days after award. Inspection and acceptance must occur at the origin, and the supplier must comply with stringent quality and packaging directives, including MIL-STD-129 for marking and labeling, ASTM D3951 for packaging with precedence given to DLA’s Master List of Technical and Quality Requirements, and RP001 for palletization standards. Sampling for verification follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical attributes must meet verification level VII or an AQL of 0.1. The item is subject to Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment and applies Covered Defense Information requirements under RD002. Surplus production is prohibited due to a negative quality history. Packaging and shipping must avoid parcel post and use the fastest traceable means, with delivery directed to the Fleet Readiness Center East at Marine Corps Air Station Cherry Point. The contract is issued under SPE7M0-26-Q-1164 and aligns with DoD unit of issue standards.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 1 hour ago

DEADLINE

in about 1 month
View Details
NAICS: 336412
New
DIBBS
WEIGHT, COUNTERBALANCE
Solicitation # SPE4A5-26-T-336Y
The contract pertains to the procurement of a Weight, Counterbalance, Stage 4, with NSN 3040-00-110-5925 and part number 9642M27P01, supplied by General Electric Company under solicitation SPE4A5-26-T-336Y. Eight units are required to be delivered within five days FOB origin, with no variance allowed in quantity. The item is subject to stringent technical and quality requirements referenced from the DLA Master List, including configuration change management, measuring and test equipment compliance, and packaging standards per MIL-STD-2073-1E and MIL-STD-129. Sampling must adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances unless otherwise stipulated, and attributes must be verified at specified levels. Cybersecurity Maturity Model Certification Level 2 self-assessment is mandatory, and the supplier must comply with DLA packaging and marking directives, including prohibition of mercury or mercury compounds in preservation, packaging, and marking, except in specified functional applications. Special handling is required due to the proprietary nature of the technical data and lack of an approved technical data package, which restricts competitive sourcing. The item must be shipped via traceable freight to the designated receiving location in San Diego, with parcel post explicitly prohibited. The delivery deadline is August 4, 2026, and all compliance obligations, including material restrictions and certification requirements, are binding under DoD procurement protocols.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 336412
New
DIBBS
VALVE, SERVO
Solicitation # SPE7M4-26-T-327S
This contract is for the procurement of a servo valve identified by NSN 4320011831928 and part number 570651, sourced exclusively from either General Electric Company DBA GE or Eaton Aerospace, LLC, and classified as a restricted source item requiring government engineering approval. It is a critical application component designated under the GE PBL program and must comply with stringent cybersecurity requirements, including a CMMC Level 2 Self-Assessment. All technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, which override other specifications such as ASTM D3951, while packaging and labeling must adhere to MIL-STD-129 and DLA Packaging Requirements with palletization conforming to RP001. The item is to be delivered FOB origin in a quantity of six units, with no variance allowed, and inspection and acceptance occur at the destination. The required delivery date is 165 days after award, with a need ship date of February 2, 2027, and the final destination is the DLA Distribution Depot in Tinker AFB, Oklahoma. The contract enforces configuration change management through Engineering Change Proposals and requires removal of government identification from non-accepted supplies.
FLUID HANDLING DIVISION

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 336412
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A7-26-T-632W
The solicitation SPE4A7-26-T-632W requires the delivery of three units of item 12121036 within 250 calendar days for mandatory first article testing at Tinker Air Force Base, with the government issuing written approval, conditional approval, or disapproval within 90 days of receipt. The contractor must comply with strict domestic sourcing requirements under the Berry Amendment and Buy American Act, with thresholds now at $150,000, and must disclose any non-domestic materials used. Non-compliance with these restrictions or submission of items produced via additive manufacturing, which is prohibited unless specifically approved, will render the offer ineligible for award. The contractor must also affirm that no covered telecommunications equipment or services from restricted foreign entities are provided, in accordance with FAR 52.204-24 and DFARS 252.204-7016. Offerors must submit quantity ranges in their quotations to accommodate fluctuating demand and avoid administrative delays, except for Auto IDC transactions. All offers must include required small business representations if applying under designated set-aside categories. Contractors must register through DLA’s new Account Management & Provisioning System to access the Vendor Shipment Module and comply with schema updates for VSM WebServices to maintain shipping eligibility. The solicitation explicitly excludes Fast Pay, and failure to submit a No Bid notice on DIBBS for anticipated future quotes may result in assumptions of non-responsiveness. The item NSN 0001S00000052, quantity five, has a 506-day delivery window, and all quotations must be submitted by August 17, 2026, to Aaron Miles at DLA, with no exceptions for non-compliant offers.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 336412
New
DIBBS
DISK, TURBINE, AIRCRAFT
Solicitation # SPE4A5-26-T-337M
This solicitation, SPE4A5-26-T-337M, is a total small business set-aside for the procurement of one aircraft turbine disk, NSN 2840-00-544-2472, with a delivery requirement of 138 days after contract award. Offerors must not provide covered telecommunications equipment or services as prohibited under FAR 52.204-24 and DFARS 252.204-7016, and must comply with domestic sourcing restrictions including the Berry Amendment, Buy American Act, and related DFARS clauses, particularly since the Berry Amendment threshold has been lowered to $150,000; any non-domestic materials must be fully disclosed. Vendors submitting quotes must provide quantity ranges due to fluctuating demand on open purchase requests to facilitate award flexibility without administrative delays, though this does not apply to Auto IDC. A small business joint venture must submit specific representations under FAR provisions 52.212-3 and 52.219-1 for relevant small business categories. The use of additive manufacturing for supplied items is prohibited unless explicitly approved by the contracting officer, and such offers will be deemed non-responsive. Access to the Vendor Shipment Module (VSM) will require registration through DLA’s new Account Management & Provisioning System (AMPS) within approximately two months, with mandatory schema updates for VSM WebServices users; contractors must monitor DIBBS notices for AMPS availability and compliance instructions. Offerors are encouraged to submit a “No Bid” entry on DIBBS if unable to quote by the closing date to prevent requirement cancellation and assist procurement planning. Fast Pay is not applicable, and APEX Accelerators assistance is available at no cost to support small business participation in federal contracting.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 336412
New
DIBBS
Aircraft Pneumatic Tire Supply and DeliveryThe contract entails the supply, packaging, and FOB destination delivery of a single military-compliant aircraft pneumatic tire identified by NSN 2620008346673, fully compliant with ASTM D3951 and MIL-STD-129 standards for packaging and labeling. This subcontract is issued under the NAICS code 336412 for Aircraft and Aircraft Parts Manufacturing and is managed by the Defense Logistics Agency within the Department of Defense. Delivery is to be completed at FOB destination, ensuring the tire is transported and delivered to the specified destination with title and risk transferring upon arrival. The solicitation was posted on August 7, 2026, and is associated with the contract identification SPE7LX26F91H3 under the parent contract SPE7LX19D0029. The work is performed under military specifications with strict adherence to quality and packaging requirements to ensure compatibility and reliability in operational environments.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

N/A
View Details
NAICS: 336412
New
DIBBS
Aircraft Pneumatic Tire SupplyThe contract mandates the supply and delivery of one pneumatic aircraft tire with NSN 2620014554869 to a location designated by the Defense Logistics Agency, with delivery required to be completed FOB destination no later than August 10, 2026. All items must adhere strictly to military packaging, labeling, and shipping standards to ensure readiness and compliance with Department of Defense requirements. The procurement is classified as a subcontract under NAICS code 336412, indicating the manufacturing of aircraft parts and accessories, and is administered by the Defense Logistics Agency under the Department of Defense. The award reference number is SPE7LX26F91J1, and the contract was posted on August 7, 2026, with performance obligations centered on timely, standards-compliant delivery to a specified military destination.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

N/A
View Details
NAICS: 336412
New
DIBBS
Aircraft Pneumatic Tire SupplyThe contract entails the supply and delivery of one aircraft pneumatic tire with National Stock Number 2620014554869, manufactured and packaged to meet both commercial and military standards. The item is destined for a U.S. Navy facility located in Virginia Beach, Virginia, ensuring alignment with operational readiness requirements. The contract is classified as a subcontract under the NAICS code 336412, which corresponds to aircraft tire manufacturing, and is managed by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on August 7, 2026, and is linked to the award number SPE7LX26F91J8 with the parent contract SPE7LX19D0029, indicating it is part of an existing procurement framework. No specific set-aside type or point of contact information is provided, and the place of performance details are not fully specified beyond the city and state.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

N/A
View Details
NAICS: 336412
New
DIBBS
Aircraft Pneumatic Tire SupplyThe contract pertains to the supply of one pneumatic aircraft tire identified by NSN 2620005758893, to be delivered under FOB destination terms, ensuring the item meets all specified contractual requirements. Delivery is mandated no later than August 14, 2026, with the responsibility for transportation and associated risks shifting to the buyer only upon arrival at the designated destination. The tire is classified under NAICS code 336412, indicating its origin within the aircraft tire manufacturing sector, and the contract is issued as a subcontract by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on August 7, 2026, and the performance location is not explicitly defined beyond the standard FOB destination framework. All deliverables must adhere precisely to technical and quality standards outlined in the contract to ensure operational compatibility and safety for defense aircraft systems.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

N/A
View Details
NAICS: 336412
New
DIBBS
Precision Aerospace Component ManufacturingThe contract calls for the manufacture of 15 turbine duct units designed for use in aircraft gas turbine engines, following strict military specifications. Each unit must be produced to meet exacting quality and performance standards, with comprehensive inspection processes applied at every stage of production to ensure compliance. The scope includes proper packaging to safeguard the components during transit and timely delivery to designated military destinations. The work falls under NAICS code 336412, indicating it is classified within the Aircraft Engine and Engine Parts Manufacturing sector. This is a subcontract arrangement under the Defense Logistics Agency, part of the Department of Defense, and is tied to the contract identifier SPETA626P0131. The posting date indicates this opportunity was made available in August 2026, with no specific set-aside provisions indicated, meaning participation is open to qualified vendors without restriction based on size or demographics.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 336415
New
DIBBS
JACKING DEVICE, GEAR
Solicitation # SPE4A5-26-T-336P
The contract pertains to the procurement of a jacking device, gear, part number 785E524G01, manufactured by General Electric Company, for use on a gear assembly SPD DECR. The item is identified by NSN 2010010328949 and is solicited under contract SPE4A5-26-T-336P with a required quantity of two units, delivered in AY units. Delivery is mandatory within 166 days from the contract award, with FOB origin terms, inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E, including preservation methods 20 and packaging material code 01, with wrapping, cushioning, and packing standards as specified. Marking must follow MIL-STD-129 with no special marking required. The destination for delivery is the DLA Distribution DDSP New Cumberland facility in Pennsylvania, and transportation logistics are governed by DLAD procedural notes C19 and C20. The original required delivery date is November 16, 2027, though a need ship date is set for January 31, 2027. The contract adheres to all DLA packaging and technical requirements referenced in the DLA Master List, and all provisions for cybersecurity maturity model certification level 2 self-assessment have been incorporated. Mercury or mercury-containing compounds are strictly prohibited in the product, preservation, packaging, or marking, except for specific functional exemptions outlined in NAVSEA 5100-003D. The item must be delivered with zero quantity variance, and the supplier must ensure compliance with all applicable defense standards and regulations without exception.
Guided Missile and Space Vehicle Propulsion Unit and Propulsion Unit Parts Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
FIXTURE, ENGINE MAIN
Solicitation # SPE4A5-26-T-337N
This solicitation, SPE4A5-26-T-337N, is a total small business set-aside for a fixture, engine main, with a quantity of four units and a delivery requirement of 166 days after contract award. Offerors must submit quotation ranges due to fluctuating demand and frequent quantity adjustments on open purchase requests, as this allows the buyer to consolidate or reduce orders without administrative delays or resolicitation. Fast Pay is not applicable, and quotes submitted after the closing date must include a “No Bid” entry on DIBBS with an anticipated quote date or reason for non-submission to avoid assumptions of non-procurability. All offerors must certify they will not supply covered telecommunications equipment or services restricted under FAR 52.204-24 and DFARS 252.204-7016. Domestic sourcing restrictions under the Berry Amendment and Buy American Act apply, with the Berry threshold lowered to $150,000; non-domestic materials require explicit disclosure. Small business joint ventures must submit required representations for eligibility under specific categories including service-disabled veteran-owned, women-owned, and economically disadvantaged women-owned small businesses. Vendors must register via the new DLA Account Management & Provisioning System (AMPS) within two months to retain access to the Vendor Shipment Module and continue shipping to DLA; users of VSM WebServices must update their internal schema. Additive manufacturing is prohibited unless specifically approved by the contracting officer, and any proposed AM-produced items will be disqualified from evaluation or award. The solicitation is managed by the Department of Defense’s ASC Supplier Operations OEM Division, with Steven Lewis as the primary point of contact.
Other Electronic Component Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 000000
New
DIBBS
INCLINOMETER, VEHICULAR
Solicitation # SPE4A5-26-T-337C
The contract specifies the procurement of 18 units of a vehicular inclinometer with NSN 6695-01-738-6848 and part number P/N 1017W1SPL3-9/10A from RIEKER INSTRUMENT CO., INC. under solicitation SPE4A5-26-T-337C. Delivery is required FOB origin within 166 days, with a ship date of January 31, 2027, and an original required delivery date of May 16, 2027. Quantity is strictly fixed at 18 units with zero variance allowed. Inspection and acceptance both occur at origin, governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which supersede all other standards. Sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise noted; unspecified attributes are treated as major. Packaging must adhere to ASTM D3951 and MIL-STD-129 for marking and labeling, with palletization following DLA packaging requirements. The item must be identified per RQ017 and all non-accepted supplies must have government identification removed per RQ011. Delivery is directed to the DLA Distribution facility in New Cumberland, PA, and transportation details are governed by DLAD Proc Note C19 for shipment and C20 for first destination. The unit of issue is each (EA), and the contract is subject to the revision of technical standards in effect on the solicitation issue date.

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 333611
New
DIBBS
SHROUD SEGMENT, TURB
Solicitation # SPE4A5-26-T-336T
The contract pertains to the procurement of a SHROUD SEGMENT, TURB with NSN 2840-01-689-4843 and part number 5200T09G09, under solicitation SPE4A5-26-T-336T. A total of 73 units are required at a unit price of $73.00, with full payment due upon delivery. The item must be delivered FOB origin within 166 days of contract award, with no variance allowed in quantity. Inspection and acceptance occur at the point of origin, and all items must comply with MIL-STD-2073-1E packaging standards, including specific methods for preservation, wrapping, and containment, with marking adhering to MIL-STD-129 and no special marking codes applied. Packaging and palletization must conform to DLA’s procurement requirements, and delivery is directed to DLA Distribution Cherry Point in North Carolina. Technical and quality compliance is governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, with revisions controlled by the solicitation or award date depending on acquisition size. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1 with zero nonconformances required unless otherwise stated, and attributes must be verified at specified acceptance quality levels. The item is subject to removal of government identification if not accepted, and physical identification must be marked per RQ017. The unit of issue is each (EA), and transportation logistics follow DLA procedural notes C19 and C20. The solicitation was posted on August 9, 2026, with a response deadline of August 17, 2026, and the original required delivery date is October 25, 2027, with a need ship date of January 31, 2027. The contracting office is under the Department of Defense, with Kirstie Ragsdale listed as the primary point of contact.
Turbine and Turbine Generator Set Units Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 335314
New
DIBBS
SOLENOID, ELECTRICAL
Solicitation # SPE4A5-26-T-337E
The contract pertains to the procurement of a solenoid, electrical, identified by NSN 5945-00-150-3034 and part number 37073 from Hamilton Sundstrand Corporation, with a quantity of six units. The item is classified as a commercial item and is designated as a critical application item with no shelf life requirement. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and compliance is mandatory. Packaging must adhere to MIL-STD-2073-1E and DLA Packaging Requirements, with individual unit packing marked in accordance with IPC/JEDEC J-STD-609 to indicate lead content and other attributes, following strict placement guidelines. Marking of shipments must comply with MIL-STD-129, including the special marking code ZZ for additional requirements, and palletization must follow DLA standards. Sampling requirements mandate zero non-conformances using MIL-STD-1916 or an equivalent zero-based plan, with acceptance levels set for critical, major, and minor attributes as specified. The unit of issue is EA, with a fixed quantity and zero variance permitted. Delivery is FOB origin with inspection and acceptance occurring at destination, within 399 days of contract award. The item requires no Unique Identification, per DFARS 252.211-7003(c)(1)(i). The delivery destination is DLA Distribution Cherry Point in North Carolina, with a required ship date of April 5, 2026, and an original delivery deadline of August 8, 2027. Transportation and freight instructions are governed by specific DLA procedural notes, and all documentation must align with the approved solicitation SPE4A5-26-T-337E.
Relay and Industrial Control Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
PANEL, INTERFACE DEV
Solicitation # SPE4A5-26-T-336K
This contract pertains to the procurement of a PANEL, INTERFACE DEV, identified by NSN 4920-01-659-7555 and part number 8M0086566, with a quantity of five units to be delivered under solicitation SPE4A5-26-T-336K. The item is classified as a commercial off-the-shelf (COTS) product and must comply with DLA’s packaging requirements, MIL-STD-2073-1E for preparation, and MIL-STD-129 for marking, with no special marking required. Sampling and inspection follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances mandatory unless otherwise specified. Critical, major, and minor attributes are to be verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively. The item must be delivered FOB origin within 20 days of contract award, with inspection and acceptance occurring at the destination. Delivery is to be made via the fastest traceable means, excluding parcel post, to the specified freight address in Baltimore, MD, under a fixed price of $5.00 per unit totaling $25.00. Compliance with DLA’s Master List of Technical and Quality Requirements is mandatory, and the supplier must complete a Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment. Physical identification and bare item marking are required per RQ017, and government identification must be removed from non-accepted supplies per RQ011. The original required delivery date is August 3, 2026, and the contract is subject to strict zero variance in quantity.
Other Electronic Component Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332216
New
DIBBS
INSTALLER, SEAL
Solicitation # SPE4A5-26-T-337S
The contract is for the supply of an installer seal with NSN 5120011507031 and part number 7070077311041, under solicitation SPE4A5-26-T-337S, with a requirement for seven units to be delivered within 20 days FOB origin. The item is designated as a critical application item and must comply with technical and quality requirements referenced from the DLA Master List, including ISO 9001:2015 for quality management and MIL-STD-2073-1E for packaging. Packaging specifications require adherence to MIL-STD-129 for marking, with no special marking codes, and palletization must follow DLA packaging guidelines. Sampling for acceptance follows Sikorsky Corporation’s Alternate Sampling Plan QAP 1201, which must meet or exceed ASQ H1331 or MIL-STD-1916 standards. No Item Unique Identification is required per DFARS 252.211-7003(c)(1)(i). The delivery is to be made to the Commanding Officer, INS TUNIR, in Ghatskopar West, Mumbai, India, with the required delivery date set for August 13, 2026. Pricing is fixed at $7.00 per unit for a total of $49.00, with zero variance allowed in quantity. Inspection and acceptance occur at origin, and transportation details reference DLAD procedural notes C19 and C20. The contract mandates use of the DoD authorized unit of issue and specifies the purchase request number 7017810544. Government-specific identifiers include DODIC A01, distribution code F9B, and project code TP 2. The contracting office is the ASC Supplier Oper OEM Division under the Department of Defense, with Sean Moore as the primary point of contact.
Saw Blade and Handtool Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
RETAINER, LANDING GE
Solicitation # SPE4A5-26-T-337W
The contract pertains to the procurement of a retainer for landing gear, identified by NSN 1630-01-044-6825 and part number 209-050-114-7, with a quantity of one unit. Manufacturing must be performed using a metal casting process, requiring specific tooling, and suppliers are directed to contact designated DLA assistance teams for sourcing guidance related to tooling and materials. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. The item must comply with stringent packaging standards per MIL-STD-2073-1E and marking specifications per MIL-STD-129, with no special marking required. Sampling and inspection follow MIL-STD-1916 or equivalent zero-based plans, with zero non-conformances mandated unless otherwise specified, and attributes are classified with defined verification levels and AQLs. Cybersecurity requirements mandate a CMMC Level 2 Self-Assessment, and all supplies must have government identification removed if not accepted. Delivery is FOB origin, with a 20-day lead time to meet the original required delivery date of August 13, 2026, and the final destination is the Taiwan Army's Zuoying Ammunition Sub-depot in Kaohsiung. Packaging, shipping, and freight logistics adhere to DLA-specific procedures, with the unit of issue as a single EA and no quantity variance permitted. The contract is issued under solicitation SPE4A5-26-T-337W by the Department of Defense under NAICS code 336413.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 326130
New
DIBBS
PLASTIC SHEET, ADHES
Solicitation # SPE4A5-26-T-336H
The contract specifies the procurement of adhesive-coated plastic sheeting identified by NSN 9330-01-581-2003, with a total quantity of three rolling units, each equal to 60 feet, for delivery within 20 days of award. The item is classified as a commercial item and must comply with stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers including RQ017 for physical identification and marking, RC001 for documentation during source approval, and RQ001 for tailored quality requirements applicable to both manufacturers and non-manufacturers. Packaging must adhere to DLA standards, and all materials require shelf life code H, meaning they must be stored at 70 degrees Fahrenheit with no more than 50 percent relative humidity and have a 12-month shelf life. Inspection and acceptance occur at the origin, and government identification must be removed from any non-accepted supplies. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Alternative offerors must submit a complete data package covering both the approved and alternate parts, as no data is currently available. The solicitation number is SPE4A5-26-T-336H, posted on August 9, 2026, with responses due by August 17, 2026, and performance is directed to Elizabeth City, North Carolina, under the U.S. Department of Defense, ASC Supplier Operations OEM Division.
Laminated Plastics Plate, Sheet (except Packaging), and Shape Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 336310
New
DIBBS
O-RING
Solicitation # SPE4A5-26-T-336S
The contract is for the supply of 145 units of an O-RING with NSN 5331016997328 and part number 68-1452 under solicitation SPE4A5-26-T-336S, issued by the Department of Defense through the ASC Supplier Oper OEM Division. The item must be delivered FOB origin within 122 days of contract award, with no variance allowed in quantity, and is subject to inspection and acceptance at the destination. Packaging must comply with MIL-DTL-117, Type II, Class C, Style 1 using a medium duty, waterproof, greaseproof, and opaque bag to protect against UV degradation, as the item falls under Federal Supply Classifications 5330/5331. All packaging, marking, and preservation must adhere to MIL-STD-2073-1E and MIL-STD-129, with special marking code 20-20 prohibiting bending. Mercury and mercury compounds are strictly prohibited in any preservation or packaging materials. Palletization and packaging follow DLA’s RP001 requirements, and transportation instructions are governed by DLAD proc notes C19 and C20. The delivery destination is Hill AFB, Utah, with a required ship date of December 18, 2026, and an original delivery deadline of June 8, 2027. Technical and quality standards referenced via R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revision control based on solicitation or award date as applicable. Unit of issue is each (EA) at a unit price of $145.00, totaling $21,025.00.
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
BAR ASSEMBLY, STEERI
Solicitation # SPE4A5-26-T-337T
The contract pertains to the procurement of a Bar Assembly, Steering, identified by NSN 4920-01-156-0944 and part number 70700-77112-041, with a required quantity of six units to be delivered within 20 days from the contract award. The item must comply with stringent DLA packaging standards per MIL-STD-2073-1E, including specific preservation methods, packaging materials, and marking requirements in accordance with MIL-STD-129, with no special marking designated. Sampling and inspection follow MIL-STD-1916 or comparable zero-based plans, assigning verification levels of VII, IV, and II for critical, major, and minor attributes respectively, with zero non-conformances required unless otherwise stated. The product is subject to strict configuration change management and requires a formal Engineering Change Proposal or variance request for any deviations. Technical data is proprietary and insufficient for competitive sourcing, with suggested suppliers including Grain Valley Tool & Mfg. Co. and EDR Industries Inc., both holding the same part number. The item must adhere to cybersecurity requirements under CMMC Level 2 self-assessment, and no mercury or mercury compounds are permitted in packaging or preservation. The delivery is FOB origin, with inspection and acceptance occurring at origin, and the end destination is the Commanding Officer, INS TUNIR in Mumbai, India. The sole point of contact for the solicitation is Hien-Van Trinh, and the contract was issued under solicitation number SPE4A5-26-T-337T with a response deadline of August 17, 2026, and an original required delivery date of August 13, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 334512
New
DIBBS
CALIBRATOR, TEMPERAT
Solicitation # SPE4A5-26-T-336J
The contract pertains to the procurement of one Fluke Electronics Corp Calibrator, Temperature, model P/N 9142-A-156, identified by NSN 6685-01-718-0114, with a requirement for delivery within 20 days of contract award. All technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, and packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, including marking per MIL-STD-129 with no special marking codes. Sampling and inspection must follow MIL-STD-1916 or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; inspection and acceptance occur at the destination point. Delivery is FOB origin, and shipment must be transported via traceable means, not parcel post, to the specified delivery address aboard the USNS HECTOR A CAFFERATA in San Diego, California. The contract prohibits any variance in quantity, with a firm requirement of exactly one unit priced at the quoted amount. The contract reference is SPE4A5-26-T-336J, with a required delivery date of August 3, 2026, and the solicitation was issued on August 9, 2026, with responses due by August 17, 2026. The item falls under NAICS code 334512, and the point of contact is Rosa Tyiska of the Department of Defense’s ASC Supplier Oper OEM Division.
Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details