Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

VALVE, BALL

Active
SPE7MC-26-T-144AFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of three ball valves identified by NSN 4820-01-475-2224 under solicitation SPE7MC-26-T-144A, with a delivery requirement of 93 days after award. The valves must be accompanied by a signed hydrostatic test report for each unit, certifying successful compliance with the referenced specifications, and this documentation must be physically attached to or enclosed within each shipping box. Full and open competition applies, and the use of Class I ozone-depleting chemicals is strictly prohibited, even if specified elsewhere, with any approved substitute chemicals requiring formal authorization. The contract incorporates technical and quality requirements from the DLA Master List, and the applicable revision is determined by the solicitation or award date depending on the acquisition size. Technical data associated with the valves is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons regardless of location, and access is limited to contractors certified under the US/Canada Joint Certification Program, who have completed required DOD export control training and received DLA approval. The contractor must comply with RQ001 tailored quality requirements and RQ032 export control provisions, and ensure government identification is removed from non-accepted supplies. All work is performed at New Cumberland, Pennsylvania, and inquiries should be directed to Marisa Thompson of the Defense Logistics Agency.

General Info

Procure three ball valves with hydrostatic test reports, comply with export controls and quality requirements, delivery in 93 days, New Cumberland, PA.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

332911 - Industrial Valve ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DDSP NEW CUMBERLAND FACILITY
View Agency Profile
Office AddressUS
Contacts
Marisa Thompson
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
VALVE,BALL
VALVE,BALL
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Contractor shall enclose a signed hydrostatic test report with each valve supplied under contract. This information can be placed in each box or affixed to each box as a label. Information contained on the label/report shall certify that Hydrostatic testing has been performed and successfully met the requirements of the drawing or specification sited in the contract.
FULL AND OPEN COMPETITION APPLY
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS.
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND NON-MANUFACTURERS)
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint
SPE7MC-26-T-144A
SECTION B
Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 4820-01-475-2224 Quantity: 3 EA Purchase Request: 7013005326QTY: 3 Delivery: 93 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332911
New
DIBBS
VALVE, GLOBEThe contract specifies the procurement of five cryogenic globe valves with brass bodies and CRES stems, each featuring a Teflon seat disk and stem seal, 1-inch socket ends, and cleaned for liquid oxygen service. These valves are designated as critical application items for use with the TMU/70 LOX cart and are identified by NSN 4820-00-071-1659 and part number 118225. The contract incorporates all technical and quality requirements from the DLA Master List of Technical and Quality Requirements, with compliance tied to the version in effect on the solicitation or award date, depending on acquisition size. Packaging must conform to MIL-STD-2073-1E and MIL-C-52211, with marking procedures aligned to MIL-STD-129 and palletization following DLA packaging standards. The unit of issue is each, with a total quantity of five units at a unit price of $5.00, totaling $25.00. Delivery is required FOB origin within 65 days, with inspection and acceptance occurring at destination, and zero variance allowed in quantity. The delivery address is the DLA Distribution San Joaquin warehouse in Tracy, California, with a required ship date of April 15, 2025, and an original delivery deadline of April 28, 2025. Transportation instructions are governed by DLAD Proc Notes C19 and C20, and the solicitation was issued under contract number SPE7MC-26-T-143T with a response deadline of August 3, 2026, and is classified under NAICS code 332911 for industrial valve manufacturing.
DLA DIST SAN JOAQUIN

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
VALVE, STOP-CHECKThe item is an in-line stop-check globe valve with a 1.250 inch size, classified as Class B and featuring a nitrile bonnet o-ring material. Each valve must have a securely attached identification plate displaying CID 883031887, and union tailpiece assemblies are explicitly excluded. The valve is manufactured using a metal casting process requiring specialized tooling, and sourcing or production inquiries must be directed to the appropriate DLA engineering support teams for aviation, land, or maritime supply chains. The valve is subject to export control under either ITAR or EAR regulations, meaning technical data associated with it cannot be disclosed to foreign persons, including foreign nationals within the U.S., without prior authorization from the Department of State or Commerce, in accordance with DFARS 252.225-7048. Access to this controlled data is restricted to DLA contractors with approved US/Canada Joint Certification Program credentials, completed DOD export control training, and formal approval from DLA. The NSN is 4820-01-443-8647 with a quantity of 36 units required under purchase request 7016087592. Delivery is due in 201 days after award. The solicitation, numbered SPE7MC-26-T-143P, was posted on July 21, 2026, with responses due by August 3, 2026, and is designated as a total small business set-aside under NAICS code 332911. The contracting activity is the Department of Defense through the New Cumberland facility, with Jason Endress listed as the primary point of contact.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
DISK, VALVEThe contract is for the procurement of eight DISK, VALVE units with NSN 4820-01-668-8394 and part number 803-7526487-L05WXSX1C-012, governed by technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, which take precedence over all other standards including ASTM D3951. The item is classified as a critical application item and must comply with all applicable DLA packaging directives, including MIL-STD-129 for labeling and RP001 for palletization, while strictly prohibiting the use of Class I ozone-depleting chemicals unless explicitly authorized by specifications. Delivery is FOB origin, with inspection and acceptance occurring at the point of origin, and no quantity variance is permitted. Packaging must adhere to approved standards, and all units must be prepared for shipment in accordance with specified unit of issue and quantity per unit pack provisions. The delivery window is 97 days from contract award, with a required ship date of January 13, 2026, and an original delivery deadline of March 2, 2026. All shipments are to be directed to the DLA Distribution facility at New Cumberland, Pennsylvania, as outlined in the provided parcel post and freight addresses, and transportation logistics must follow DLAD Proc Notes C19 and C20. Solicitation SPE7MC-26-T-144C is open to full and open competition under NAICS code 332911, with responses due by August 3, 2026, and primary point of contact is Marisa Thompson at DLA.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SAFETY RELIEFThis contract specifies the procurement of a safety relief valve identified by NSN 4820-01-317-5252 and part number R10AG1G1BN-BM3 D51017, supplied by Hunt Valve Company, Inc. A total quantity of seven units is required under a firm fixed price arrangement with no tolerance for variance in quantity, and delivery must be completed within 300 days after the award date. Inspection and acceptance occur at the destination, with the point of origin as the FOB location. The item is designated as a critical application item, requiring strict adherence to technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements. Packaging must comply with MIL-STD-2073-1E and DLA’s Packaging Requirements, including specific methods for preservation, wrapping, cushioning, and marking per MIL-STD-129 without special markings. Mercury or mercury-containing compounds are prohibited unless explicitly exempted for functional components such as batteries, fluorescent lamps, or weapon systems, and any exempted items must include a secondary containment and meet NAVSEA 5100-003D standards. The delivery destination is the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, and transportation instructions are governed by DLAD Proc Notes C19 and C20. The contract was solicited under SPE7MC-26-Q-0395, with a response deadline in August 2026 and a required ship date of May 28, 2027.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 13 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332911
New
DIBBS
FLANGE, GLAND, VALVEThe contract pertains to the procurement of 22 units of FLANGE, GLAND, VALVE with NSN 4820-01-530-3492 under solicitation SPE7MC-26-T-143V, issued by the Defense Logistics Agency through the Department of Defense’s New Cumberland facility. Delivery is required within 75 days after order placement, and responses to the solicitation were due by August 3, 2026. The item is subject to stringent export control regulations under either ITAR or EAR, meaning any disclosure of associated technical data to foreign persons, whether inside or outside the United States, requires prior authorization from the Department of State or Commerce. This restriction extends to foreign national employees and subsidiaries of U.S. companies. Access to the controlled technical data is restricted exclusively to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DLA training and questionnaire submissions and received formal approval from DLA. The contract falls under NAICS code 332911 and is administered through the DLIBBS system with primary point of contact Marisa Thompson.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
ADAPTER, BATTERY TERMINThe contract pertains to the procurement of 468 units of an adapter, battery terminal, identified by NSN 5940-01-697-1618 and part number 869TP-8TT-2, under solicitation SPE4A7-26-T-586Z. Delivery is required FOB origin within 171 days, with a final delivery deadline of April 9, 2027, and a need ship date of January 17, 2027. The quantity is fixed with zero variance allowed, and inspection and acceptance occur at the destination warehouse in Tracy, California. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R-series identifiers, which supersede any other standards such as ASTM D3951. Packaging must comply with MIL-STD-129 and DLA packaging requirements, with palletization following RP001, and labeling and marking adhering to physical identification standards. Sampling plans must align with MIL-STD-1916 or ASQ H1331, using zero non-conformances unless otherwise specified, and attributes are to be classified with specific verification levels or AQLs. The supplier must meet documentation requirements for source approval, inspection at origin, and use of calibrated measuring equipment. The unit of issue is each, and transportation logistics follow DLA procedural notes C19 and C20. The point of contact for the contract is Wendy Jones, with all correspondence routed through the DLA San Joaquin distribution center.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332911
New
DIBBS
DISK, VALVEThe contract pertains to the procurement of a DISK, VALVE with part number 793600-2 and NSN 4820-01-319-1402, for a quantity of three units, to be delivered FOB origin within 171 days of award. Technical and quality compliance is governed by the DLA Master List of Technical and Quality Requirements, with revisions effective on the solicitation issue date controlling for this simplified acquisition. The item is designated a critical application item and must adhere to strict inspection and sampling protocols per MIL-STD-1916 or ASQ H1331, with zero non-conformances required unless otherwise stipulated; attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA Packaging Requirements, and all markings in accordance with physical identification guidelines. Unit of issue is EA, with no variance allowed in quantity. The item is not subject to Item Unique Identification per customer request, though all other marking and labeling requirements remain in force. Cybersecurity compliance requires a CMMC Level 2 self-assessment, and covered defense information provisions apply. Delivery is directed to the DLA Distribution Depot in Tinker AFB, Oklahoma, with shipping and transportation procedures governed by DLAD Proc Notes C19 and C20. The contract was issued under solicitation SPE4A6-26-T-08ME, with a response deadline of July 29, 2026, and the original required delivery date set for April 18, 2028.
ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332911
New
DIBBS
COUPLING, ACTUATOR-HThe contract pertains to the procurement of three units of a coupling actuator-h, identified by NSN 4820-01-719-0116, under solicitation SPE7MC-26-T-144E, with a required delivery within 63 days of award. This is a restricted source item manufactured exclusively to the original equipment manufacturer’s drawing, and only the prequalified supplier(s) listed in the solicitation are eligible to respond unless alternative manufacturers submit comprehensive technical data for evaluation per DLAI 3200.1, Enclosure 6. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation or award date depending on the acquisition size. All delivered items must comply with DLA packaging standards and must not contain any Class I ozone-depleting chemicals, a prohibition that overrides any conflicting specification language without relaxing product performance requirements; any substitute chemicals require prior approval. The item is to be delivered to New Cumberland, Pennsylvania, with the primary point of contact being Chad Zernis of the Department of Defense’s DDSP New Cumberland Facility.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SOLENOIDThe contract pertains to the procurement of a solenoid valve with NSN 4810016483944, issued by the Defense Logistics Agency under solicitation SPE7MC-26-T-143N. Three separate line items each specify one unit to be delivered to different U.S. Navy ships—the USS Somerset LPD 25, USS Arlington LPD 24, and USS John P. Murtha LPD 26—with delivery required within 20 days of order placement and FOB destination terms. The items are each priced at $1.00 with zero quantity variance allowed, and acceptance occurs at the delivery point after inspection. Packaging and preparation must comply with MIL-STD-2073-1E, including preservation method 41, unit container E5, and marking per MIL-STD-129 with no special markings required. Palletization follows DLA’s RP001 packaging requirements, and mercury or mercury compounds are strictly prohibited in preservation, packaging, or marking. Shipping must be conducted via the fastest traceable means; parcel post is forbidden. The original required delivery date is July 16, 2026, for one unit and July 20, 2026, for the others. Compliance with the DLA Master List of Technical and Quality Requirements is mandatory, and vendors must use the Vendor Shipping Module for freight shipments. The procurement is categorized under NAICS 332911 and is open to federal suppliers with a response deadline of August 3, 2026.
Defense Logistics Agency

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
VALVE, BALLA ball valve, one inch in size with plastic polyvinyl chloride and socket ends, is being procured under contract SPE7MC-26-T-143G by the Defense Logistics Agency for delivery to the USNS EARL WARREN T-AO 207 at FPO AP 96691-2900. The item, identified by NSN 4820-01-371-1284 and manufacturer part number TB1100ST from Haywardindl. Products Inc., requires a strict quantity of ten units with no variance allowed. Delivery must be completed within twenty days of contract award, with free on board terms at destination and inspection and acceptance also occurring at the delivery point. Packaging must comply with MIL-STD-2073-1E and DLA’s packaging requirements, including marking in accordance with MIL-STD-129 and no special marking codes. The valve must be free of intentional mercury or mercury-containing compounds except for specific exempted applications like batteries, fluorescent lights, sensors, weapon systems, or naval chemical reagents, and any portable mercury-containing items must be shockproof with secondary containment as per NAVSEA 5100-003D. All technical and quality standards referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements effective on the solicitation issue date. The contract specifies unit pricing at $10.00 per unit for a total value of $100.00, with a required delivery date of July 17, 2026, and includes transportation protocols outlined in DLAD PROC NOTES C19 and C20. The procurement is subject to federal acquisition regulations and is administered through the DLA’s eProcurement system with primary point of contact Paula McClary.
Defense Logistics Agency

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
PARTS KIT, BUTTERFLYThis contract specifies the procurement of a Parts Kit for a Butterfly Valve under solicitation SPE7MC-26-T-144B, with a total quantity of five kits (KT), each identified by NSN 4810-01-535-5367 and vendor part number 80252 from ONTIC ENGINEERING & MANUFACTURING, INC. Delivery is required within 367 days FOB origin, with no variance allowed in quantity, and inspection and acceptance occur at the destination. The kit must be packaged and preserved in accordance with MIL-STD-2073-1E, Appendix D, for kits, requiring that all loose hardware be sealed within individual containers using the highest applicable preservation method to prevent corrosion or damage, and must not be shipped in bulk. Each kit must include a detailed parts list with part names, numbers, and quantities. Packaging must comply with MIL-STD-129 for marking, include the special marking instruction “OPEN THIS SIDE,” and be palletized as per DLA’s requirements. The unit of issue is officially KT (Kit) effective October 1, 2014, and all packaging methods must ensure the kit arrives in serviceable condition without requiring downstream sorting. The contract is issued under the Department of Defense through Depot Oklahoma at Tinker AFB under a Total Small Business Set-Aside, with a North American Industry Classification System code of 332911. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced via R and I numbers, and the applicable revision is determined by the solicitation or award date. Preservation and packaging must meet the latest version of MIL-STD-2073-1D to protect the most critical component within the kit, and all components must be securely contained to avoid physical damage such as dents, scratches, or nicks. The contract was posted on July 21, 2026, with a response deadline of August 3, 2026, and primary point of contact is Marisa Thompson at the DLA office. Compliance with these specifications is mandatory to ensure readiness, logistics efficiency, and operational functionality upon receipt.
DEPOT OKLAHOMA

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
VALVE, THROTTLE
PUGET SOUND

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

NAICS: 326111
New
DIBBS
BRACKET, FIRE EXTINGThe contract specifies the procurement of a fire extinguishing bracket with NSN 4210-01-541-0695 and part number 429146, under solicitation SPE8E6-26-T-3772, with a requirement for 52 units delivered FOB origin within 13 days of award. All items must comply with the DLA Master List of Technical and Quality Requirements, which take precedence over commercial standards such as ASTM D3951. Packaging must adhere to RP001 guidelines and MIL-STD-129 for marking and labeling, with hazardous materials packaged per TQ requirement IP025 if classified under FED-STD-313. The unit of issue is each, with no variance permitted in quantity. Inspection and acceptance occur at the destination, and delivery must be made to the DLA Distribution facility in New Cumberland, Pennsylvania, by August 17, 2026, with the original delivery deadline set for September 13, 2026. Transportation and shipping instructions follow DLAD Proc Notes C19 and C20. The contract references covered defense information and mandates removal of government identification from non-accepted supplies, with all requirements governed by the version of the DLA Master List in effect at the time of solicitation issuance.
Plastics Bag and Pouch Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
New
DIBBS
SLING, MULTIPLE LEGThis contract, identified by solicitation number SPE8EG-26-Q-0007, is for the procurement of 2,000 units of a SLING, MULTIPLE LEG under a Total Small Business Set-Aside, with a delivery requirement of 220 days after contract award. The contract incorporates stringent technical and quality requirements from the DLA Master List, including CMMC Level 2 certification for third-party assessors, packaging standards per DLA requirements, and quality conformance inspections. Mandatory identification marking of all items must conform to MIL-STD-130N, and no mercury or mercury-containing compounds may be intentionally added to the product unless exempted for approved applications such as specific batteries, instruments, or weapon systems, with additional containment and shockproofing requirements for portable fluorescent lamps and instruments as dictated by NAVSEA 5100-003D. The contractor must immediately contact NSWC IHD DET PICA upon award to secure serial numbers for the items, using the designated email address and including the nomenclature, quantity, drawing number, and contract number in the request. Technical data associated with this item is subject to export controls under ITAR or EAR, requiring strict compliance with DFARS 252.225-7048, which limits access to only those contractors with approved JCP certification, completed DLA export training, and explicit authorization to handle controlled data. Access to drawings is restricted to the open solicitation period via the DIBBS portal, and all covered defense information must be safeguarded per applicable regulations.

POSTED

about 13 hours ago

DEADLINE

in 29 days
View Details
NAICS: 332912
New
DIBBS
STEM, FLUID VALVE
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
New
DIBBS
INSTALLATION KIT, CB

POSTED

about 13 hours ago

DEADLINE

in 13 days
View Details
New
DIBBS
JACK, PLANER

POSTED

about 13 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332911
New
DIBBS
VALVE, CHECKThe contract is for the procurement of six check valves, identified by NSN 4820-12-389-9093 and manufacturer part number 735080022301 from MTU Friedrichshafen GmbH DBA MTU D8266, under solicitation SPE7MC-26-T-143S. The items must be delivered in 46 days FOB origin with zero variance in quantity, inspected and accepted at the destination. Packaging must comply with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, and all packaging and labeling must adhere to MIL-STD-129. The Unit of Issue is each, with six units ordered at a unit price of $6.00, totaling $36.00. Delivery is directed to the DLA Distribution facility at 2083 Normandy Drive, Door 113 to 134, New Cumberland, PA 17070-5002, with a required ship date of July 20, 2026. Transportation logistics follow DLAD Proc Note C19 for general transport and C20 for the first destination. The valves are classified as a critical application item, and government identification must be removed from non-accepted supplies. The contract references the DLA Master List of Technical and Quality Requirements, with compliance based on the revision in effect at the time of solicitation issuance. The point of contact is Chad Zernis, with the response deadline set for August 3, 2026.
Industrial Valve Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
DISK, VALVEThe item specified is a DISK, VALVE and PLUG, VALVE with NSN 4820-01-124-2788, with a quantity of two units required under purchase request 7011806542. Delivery is due within 125 days after order issuance. The solicitation, identified as SPE7MC-26-T-143W, was posted on July 21, 2026, with responses due by August 3, 2026, and is managed by the DDSP NEW CUMBERLAND FACILITY under the Department of Defense. The NAICS code 332911 classifies this procurement within the machinery manufacturing sector. This item is subject to strict export control under either ITAR or EAR, meaning all technical data associated with it cannot be disclosed or transferred to foreign persons, regardless of location or nationality, without prior authorization from the U.S. Department of State or Commerce. Only contractors certified under the US/Canada Joint Certification Program who have completed mandatory DOD training and DLA’s export control questionnaire, and have received explicit approval from DLA, are permitted to access or handle this data. DFARS 252.225-7048 governs compliance with these restrictions. The point of contact for the solicitation is Marisa Thompson, reachable at marisa.thompson@dla.mil or 614-623-3459.
Industrial Valve Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details