Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

VALVE, BALL ANLR

Active
SPE2DH-26-T-5467Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for a single ball valve, ANLR, identified by NSN 6530-01-546-3565 and part number 700321 Rev J from Getinge USA Inc, with a purchase request number 7017596580 and a unit quantity of one. Delivery is required within 20 days to a military destination at FPO AP 96673, shipped FOB destination with no variance allowed in quantity, and inspection and acceptance occur upon arrival. Packaging must comply with commercial standards as specified for medical acquisitions, using sealed unit containers capable of preventing damage, and exterior shipping containers must ensure safe, cost-effective transport by common carrier. All marking must adhere to Medical Marking Standard No. 1, which supersedes MIL-STD-129, and detailed packaging instructions are referenced from DLA’s guidelines. The item is regulated by the FDA as a Class II device requiring a 510(k) along with compliance for registration, labeling, and GMP. Mercury or mercury-containing compounds are prohibited unless specifically exempted, and any portable devices containing mercury must include shockproof design and a secondary containment. Technical and quality requirements are governed by the DLA Master List, with revision control tied to the solicitation or award date. The contracting official must submit an EBS referral to confirm FDA compliance, including manufacturer and item details. The contract is issued under solicitation SPE2DH-26-T-5467, with a response deadline of July 30, 2026, and is managed by the Department of Defense’s Medical Supply Chain FSH.

General Info

One ANLR ball valve, NSN 6530-01-546-3565, FDA Class II, FOB destination, delivery in 20 days, FDA 510(k) required.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSHView Agency

NAICS

331313 - Alumina Refining and Primary Aluminum ProductionView NAICS

Place of Performance

UNIT 100207 BOX 1, FPO, AP, 96673, US

Set-Aside

NONE

Documents

(1)

SPE2DH-26-T-5467.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIIN FSH
View Agency Profile
Office AddressUS
Contacts
Tina Vu
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
VALVE,BALL ANLR
VALVE, BALL ANLR
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
This device or drug is regulated by the FDA. Note to Buyers: The contracting official shall send a referral in EBS to the product specialist for confirmation. Please include bidder name and bidder contact information, manufacturer name, manufacturer part number, and item description.
REGULATION 880.6880 CLASS II EVEN THOUGH A 510(K) IS REQUIRED, IT IS NECESSARY TO MEET OTHER REQUIREMENTS FOR MARKETING. THESE INCLUDE: REGISTRATION AND LISTING, LABELING OR GMP'S.
SPE2DH-26-T-5467
SECTION B
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
SHALL BE MARKED IAW THE LATEST EDITION OF
THE MEDICAL MARKING STANDARD NO. 1.
MMS NO. 1 IS AVAILABLE ONLINE AT:
https://www.dla.mil/Logistics-Operations/Packaging/
GETINGE USA INC 32510 P/N 700321 REV J ITEM 78 GETINGE USA SALES, LLC 7Z1K6 P/N 511428
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017596580 0001 EA 1.000
NSN/MATERIAL:6530015463565
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
SPE2DH-26-T-5467
SECTION B
PR: 7017596580 PRLI: 0001 CONT’D
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
PARCEL POST ADDRESS:
N23168
USS NEW ORLEANS LPD 18
UNIT 100207 BOX 1
FPO AP 96673
US
RDD 777 SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
N23168
USS NEW ORLEANS LPD 18
DLA VENDORS: USE VSM FOR
US
M/F: (TCN) N2316861980017
RDD: 777
PROJ: ZH9 TP 2
SUPP ADD: N48096 SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A41 DIST: V9B ADV: 2A FC: VO
Need Ship Date:00/00/0000 Original Required Delivery Date:07/27/2026
SPE2DH-26-T-5467 NSN/Part Number: 6530-01-546-3565 Quantity: 1 EA Purchase Request: 7017596580QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 331313
New
DIBBS
HYGIENE KIT, PATIENT
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 331313
New
DIBBS
BAG, EXTRICATION COL
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 331313
New
DIBBS
BAG, MEDICAL SUPPLY,
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 331313
New
DIBBS
TRAY, INSTRUMENTThe contract pertains to a lightweight compact Mayo tray identified by NSN 6530-01-618-7704, intended for use with the Allevac Mayo Stand, with a unit of issue of each and a requested quantity of one. Bidders must specify the source and part number being supplied, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements accessible via the provided DLA webpage, with revisions controlled by the solicitation issue or award date depending on the acquisition size. The item is to be delivered within five days of award, and the purchase request number is 7017577809. The solicitation number is SPE2DH-26-T-5404, issued on July 22, 2026, with a response deadline of July 29, 2026. The contract falls under NAICS code 331313, with the Department of Defense’s Medical Supply Chain FSH as the agency, and performance is required at JBER, Alaska, 99506-4400. Primary point of contact is Tina Vu, reachable via email and phone as listed.
MEDICAL SUPPLY CHAIIN FSH

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 331313
New
DIBBS
SOAP DISPENSER ASSEMBLThe contract pertains to the procurement of a SOAP DISPENSER ASSEMBLY for use with a surgical sink, specifically identified by NSN 6530-01-588-5078, with a quantity of two assembly units required. The assembly includes a dispenser bottle, mounting bracket assembly, foot pedal and hose assembly, pouch, and paper towel holder, and is intended for integration with the END ITEM 6530-01-572-6775 Surgical Sink used in field hospital settings. Delivery must be completed within 20 days after award, and the solicitation number is SPE2DH-26-T-5415, with bids due by July 29, 2026. Bidders are required to clearly specify the source and part number being supplied, and all submissions must comply with applicable technical, quality, and packaging requirements outlined in the DLA Master List of Technical and Quality Requirements, as well as DLA packaging standards. The government mandates the removal of any government identification from non-accepted supplies, and the procurement is managed by the Department of Defense through the Medical Supply Chain FSH, with Tina Vu as the primary point of contact.
MEDICAL SUPPLY CHAIIN FSH

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 331313
New
DIBBS
DISPOSAL CONTAINER, HYPThe contract pertains to the procurement of a disposal container designed for hypodermic needles, with specific dimensions of 1.25 inches by 6 inches and identified by the part number SHARPS SHUTTLE P2 RP001. Each container is engineered to hold up to six needles in a vertical orientation and is sold in a unit of issue labeled PG. The item is cataloged under NSN 6530-01-619-5671 with a purchase request number 7017578605, and only one unit is being requested. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones, unless amended. The container must comply with DLA packaging requirements and the bidder must clearly indicate the source and part number being supplied. The solicitation number is SPE2DH-26-T-5413, posted on July 22, 2026, with bids due by July 29, 2026. Delivery is required within 20 days of award, and the place of performance is Fort Bliss, Texas, with a zip code of 79918-2527. The procurement is managed by the Medical Supply Chain FSH under the Department of Defense, utilizing the NAICS code 331313. Primary point of contact is Tina Vu, reachable via email at tina.vu@dla.mil or phone at 4457371120. All supplies must adhere to the requirement for removal of government identification if not accepted. Bidders are directed to the DIBBS portal for full solicitation details and must ensure compliance with all referenced technical and quality standards.
MEDICAL SUPPLY CHAIIN FSH

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 331313
New
DIBBS
VALVE, BALL ANLRThe contract is for a single ball valve, designated as VALVE, BALL ANLR, with NSN 6530-01-546-3565 and part number 700321 REV J, under solicitation SPE2DH-26-T-5397, with a required delivery within 20 days to FPO AP 96666. The item is classified as a Class II medical device under FDA Regulation 880.6880, requiring compliance with 510(k) premarket notification along with registration, listing, labeling, and GMP standards, and the contracting official must submit an EBS referral for confirmation. Packaging and marking must adhere strictly to the Medical Marking Standard No. 1, which supersedes MIL-STD-129, and each unit must be sealed in a protective container within commercial shipping packaging suitable for safe transit via common carrier at the lowest cost. The product is subject to DLA Packaging Requirements and must be palletized accordingly, with no intentional addition of mercury or mercury compounds except in exempted functional components like batteries or instruments, which must also meet shock-proof and secondary containment standards per NAVSEA 5100-003D. Delivery is FOB destination, inspection and acceptance occur at the delivery point, and no quantity variance is permitted. The shipment must not use parcel post and must be transported using the fastest traceable method. All technical and quality requirements referenced are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on solicitation or award dates, and the contract includes specific government-use identifiers for tracking and distribution.
MEDICAL SUPPLY CHAIIN FSH

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 331313
New
DIBBS
INDICATOR, STERILIZATIOThe contract pertains to the procurement of sterilization indicators, specifically identified by part number L22-0045 and NSN 6530-01-606-2228, with a unit of issue of one package (PG) containing 24 individual units. Each package must be color-coded red, labeled with sterility dating and load control information, and marked with the inscription “STERILIZED S1” to be compatible with the handheld labeling tool part number M20-0054. The product is regulated by the FDA, and the contracting official must submit a referral in EBS to confirm product suitability, including bidder and manufacturer details. Packaging and labeling must strictly comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and all packaging must meet ASTM D3951 standards unless overridden by higher-priority DLA Technical and Quality Requirements. The entire lot of 24 units must be delivered within five days to the Carrier Outfitting Matl Support Center in Suffolk, VA, under FOB destination terms with no variance in quantity allowed. Shipment must be sent by the fastest traceable means, explicitly prohibiting parcel post, and palletization must conform to DLA Packaging Requirements. The solicitation number is SPE2DH-26-T-5399, with a required delivery date of July 24, 2026, and the primary point of contact is Tina Vu at DLA.
MEDICAL SUPPLY CHAIIN FSH

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 331313
New
DIBBS
LITTER, NONRIGID, POLELEThe litter is a nonrigid, poleless, shoulder-carried medical evacuation device with a minimum weight capacity of 450 pounds, measuring 65 inches by 23 inches when unpacked and compacting to 10 inches by 7 inches by 1.5 inches thick when packed. It must be entirely black and equipped with quick-release straps for rapid deployment. The item is classified as a Class I medical device under FDA regulation 880.6900, requiring compliance with registration, listing, labeling, and GMP standards even though a 510(k) premarket notification is not mandatory. It must be marked according to the latest edition of Medical Marking Standard No. 1, superseding all references to MIL-STD-129, and packaged in accordance with DLA Packaging Requirements and MIL-STD-2073-1E, ensuring each unit is sealed in a protective container suitable for safe transport by common carrier. The unit of issue is each, with a contract quantity of 12 units to be delivered FOB destination within 84 days of order, with no variance allowed in quantity. Packaging must include commercial materials, no government identification on non-accepted supplies, and comply with all applicable DLA and FDA medical device regulations. The contracting office is the Department of Defense, Medical Supply Chain FSH, with delivery directed to a U.S. military medical facility in Kaiserslautern, Germany, and primary point of contact located at DLA.
MEDICAL SUPPLY CHAIIN FSH

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 331313
New
DIBBS
Raw Material Supply – Aluminum/Steel Alloy Sheet StockThe contract entails the supply of certified aluminum or steel alloy sheet stock to meet military or industrial specifications for the fabrication of electronic mounting trays. The materials must adhere to established standards to ensure compatibility, durability, and performance in defense-related applications, and the sourcing is restricted to qualified vendors capable of consistent compliance with quality and certification requirements. The contract falls under NAICS code 331313, indicating a focus on aluminum rolling, drawing, and extruding, and is classified as a subcontract within the Department of Defense structure managed by the Defense Logistics Agency. Performance obligations are tied directly to the production of electronic mounting trays, requiring precise material properties, dimensional tolerances, and traceability of alloy composition. The contract was posted on July 21, 2026, and is administered under the DLA’s procurement system with the identifier SPE4A726P5272. While no specific place of performance or point of contact is listed, all deliveries must support defense manufacturing workflows, and suppliers are expected to maintain certification records for inspection. The transaction is part of the broader DOD supply chain infrastructure aimed at securing critical components for electronic systems.
Defense Logistics Agency

POSTED

3 days ago

DEADLINE

N/A
View Details
NAICS: 331313
New
DIBBS
Aerospace Materials Supply for Stiffener Fabrication
Defense Logistics Agency

POSTED

3 days ago

DEADLINE

N/A
View Details
NAICS: 331313
New
DIBBS
WRAP AND LITTER, PATThe contract specifies the procurement of 29 units of a chemical protective patient wrap and litter system designed for medical use in hazardous environments. The wrap is engineered to allow controlled exchange of air and carbon dioxide while maintaining protective integrity, with a transparent head-end window for full visibility of the patient’s face and an integrated transparent pocket to house an evacuation tag. Carrying handles are built into the design for ease of transport, and two dedicated passageways accommodate intravenous and respiratory tubing. A cardboard tent is included to keep the wrap elevated from the patient’s face, ensuring unobstructed breathing and comfort. The unit is classified under NSN 6530-01-577-1091 and is supplied as individual units, with delivery required within 172 days from award. The solicitation, identified as SPE2DH-26-T-5342, is a total small business set-aside under NAICS code 331313, issued by the Department of Defense’s Medical Supply Chain FSH, with performance taking place at Hill AFB, Utah. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and non-accepted supplies must have government identification removed as mandated. The primary point of contact is Tina Vu, reachable via email and phone, and responses are due by July 28, 2026. The procurement is accessible through the DIBBS portal with the provided UI link.
MEDICAL SUPPLY CHAIIN FSH

POSTED

3 days ago

DEADLINE

in 4 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

Same awarding agency

NAICS: 423450
New
DIBBS
FOOTWEAR COVERS, OPERATDisposable, nonconductive, high-style foot covers designed for operating room use are required in blue, with a universal fit extending leg-up to the knee, featuring a poly-coated shoe area and elastic bands at both the ankle and knee for secure fit. The soles include an adhesive strip for enhanced traction, and the entire cover is made of plastic material. Each unit of issue is a package containing 150 individual covers, and all items must be marked in compliance with the latest edition of the Medical Marking Standard No. 1, as defined by DLA Troop Support. This is a MEDSEP/MEDSTOCK item with strict sourcing requirements—only the specified part number 6532-01-337-3685 is authorized, and no substitutions or replacements are permitted. The procurement is governed by DLA packaging and technical requirements, with compliance determined by the version of the Master List of Technical and Quality Requirements in effect on the solicitation issue date. The order is for two packages, with delivery required within five days of award, under solicitation SPE2DH-26-T-5428, with performance at Fort Bragg, North Carolina. All inquiries should be directed to Tina Vu at DLA Medical Supply Chain FSH.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 326199
New
DIBBS
POUCH, LIQUID ABSORBENTThe contract is for the procurement of 1,000 disposable liquid absorbent pouches, each with a capacity of 6.750 ounces and designed to expand upon contact with aqueous solutions such as urine, blood, and other biohazardous fluids. Each pouch measures 4x3 inches and features a heat-sealed, leak-resistant construction with flow-through tissue to enhance absorption. The item is identified by NSN 6530-01-307-7433 and is packaged in a single unit of issue containing 1,000 pouches per package. The solicitation requires bidders to specify the source and part number being supplied, and all supplies must comply with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Packaging must adhere to DLA packaging standards, and any non-accepted supplies must have all government identification removed prior to return. The delivery requirement is within 20 days of order placement, with performance location specified as Virginia Beach, Virginia. The solicitation opens on July 23, 2026, and bids are due by July 30, 2026, under contract number SPE2DH-26-T-5457, with point of contact Tina Vu at the Department of Defense, Medical Supply Chain FSH.
All Other Plastics Product Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
BAG, URINALThe contract is for the purchase of 3 packages of urinal bags, each containing 20 absorbent urinal bags designed to replace traditional plastic urinals while enabling accurate measurement of diuresis and laboratory analysis, suppressing odors, and reducing cleaning requirements. The item, identified by NSN 6530-01-608-6210 and part number 939Y37373, is regulated by the FDA as a Class I medical device and must comply with all applicable marketing requirements including registration, listing, labeling, and GMP standards, even though a 510(k) submission is not required. The product must be marked in accordance with Medical Marking Standard No. 1, superseding all references to MIL-STD-129, and packaged per MIL-STD-2073-1E and DLA packaging requirements, with each unit sealed in a protective container and shipped in commercial exterior packaging suitable for safe transport at the lowest freight rate. Delivery is due within 20 days, FOB destination, to Fort Bragg, North Carolina, with no tolerance for quantity variance. The shipment must be sent via traceable means and not by parcel post. Packaging and labeling must adhere strictly to DLA and medical marking standards, including the inclusion of required government and commercial markings, and palletization must follow RP001 guidelines. The contract falls under solicitation SPE2DH-26-T-5425, issued by the Department of Defense’s Medical Supply Chain FSH, with a required delivery date of July 24, 2026. All technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements apply, and the contractor must ensure full compliance with medical device regulations and marking protocols as outlined in the procurement documentation.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339114
New
DIBBS
POINT, ENDODONTICThe contract specifies the procurement of absorbent paper points for endodontic use, classified as fine grade, with packaging in cell packages containing 40 cells of 5 each, totaling 200 units per package. The unit of issue is one package, and the item is identified by NSN 6520-00-904-1978. Technical and quality requirements referenced by R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition type. The item is subject to shelf-life requirements stipulating a minimum 48-month shelf life with no extensions allowed, and delivery must occur within seven months of manufacture. Packaging and labeling must comply with MMS1A standards, clearly indicating the date of manufacture, expiration or retest date, and contract or lot number. The item is classified as a TYPE I (CODE R) with controlled shelf-life and requires de-identification of government markings on non-accepted supplies. The solicitation number is SPE2DH-26-T-5447, issued on July 23, 2026, with bids due by July 30, 2026. Delivery must be completed within five days of award to APO, 09898, under the NAICS code 339114, managed by the Department of Defense’s Medical Supply Chain FSH, with Tina Vu as the point of contact.
Dental Equipment and Supplies Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
CHIP, TRAININGThe contract pertains to the procurement of a single unit of a simulation training chip designed for use with chip measurement systems, identified by NSN 6630-01-482-4380. The item is classified as an electronic detector tube system with a unit of issue specified as each. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date depending on the acquisition size. The product must comply with DLA packaging standards, including commercial packaging as specified in the procurement document, with each unit sealed in a container that protects against damage and is shipped in exterior containers suitable for safe delivery via common carrier at the lowest cost. All packaging and labeling must conform to Medical Marking Standard No. 1, which supersedes MIL-STD-129, and must clearly display the date of manufacture, expiration or retest date, and the contract number or lot number. The item must have a shelf life of 24 months, with no more than three months having passed from the date of manufacture to the date of delivery to the government, and all shelf life markings must adhere to the latest revision of MMS1C. The acquisition is part of a federal solicitation issued by the Department of Defense under contract number SPE2DH-26-T-5444, with a response deadline of July 30, 2026, and a delivery requirement of five days after order award. The point of contact for the solicitation is Ryan Sullivan of DLA Troop Support.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
CONTAINER, TRANSPORT, THThe contract specifies the procurement of a passive thermal transport container designed for the stable shipment of blood, pharmaceuticals, reagents, and vaccines in field environments. The container must maintain a temperature range of 1 to 10 degrees Celsius for a minimum of 96 hours without the need for ice or external power, and must sustain this temperature for at least 48 hours under any environmental condition. It features a proprietary phase change material and temperature indicator, measures approximately 10x9x10 inches externally and 6x5x6 inches internally, and weighs about 6.8 pounds. The unit is specified to be finished in three-color woodland military camouflage and includes a canvas cover with straps. The item is not regulated by the FDA and must be marked in full compliance with the Medical Marking Standard No. 1, which replaces all references to MIL-STD-129. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, with units shipped in sealed, commercial-grade containers suitable for safe transport via common carriers at the lowest cost. Delivery is FOB destination with zero variance allowed, inspection and acceptance occur at the destination, and shipment must be traceable—parcel post is prohibited. The sole supplier identified is PELI BIOTHERMAL LLC with part number PBT01176, and the NSN is 6530-01-505-5301. The contract requires delivery within five days of award, with scheduled delivery dates set for July 24 and July 27, 2026, under solicitation SPE2DH-26-T-5427, and must be shipped to an address in Hurlburt Field, Florida.
Surgical Appliance and Supplies Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333998
New
DIBBS
BOX, MICROSCOPE SLIDEThe contract specifies the procurement of a single unit of a plastic hinged-cover box containing 100 microscope slides, each measuring 25mm by 75mm, under NSN 6640-00-408-9915 and part number 03-448-5 supplied by FISHER SCIENTIFIC COMPANY L.L.C. The item is not regulated by the FDA and must be packaged in a sealed unit container that protects against damage or breakage, with exterior shipping containers compliant with commercial standards and capable of safe delivery at the lowest carrier rate to the destination. All packaging and labeling must adhere strictly to Medical Marking Standard No. 1, which supersedes MIL-STD-129, and must conform to DLA’s Master List of Technical and Quality Requirements, which take precedence over ASTM D3951. The material is not hazardous under FED-STD-313 and must be commercially packaged accordingly. The shipment must be sent by traceable means, excluding parcel post, and delivered FOB destination within 20 days of contract award with no tolerance for quantity variance. Delivery is required to Fort Bliss, Texas, and the item must be marked and labeled with the designated government identifiers and traceability codes. The contract mandates full compliance with all DLA packaging, marking, and delivery protocols outlined in RP001 and related technical requirements, and the supplier must specify the contract line item and part number being offered during bid submission.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339114
New
DIBBS
BLOCK SET, RADIOGRAPHICThe block set for radiographic positioning is a specialized medical device composed of coated light green stealth-core polyurethane foam with a proprietary medical-grade coating that forms a durable, easy-to-clean skin membrane resistant to blood, Betadine, barium, alcohol, oils, and other fluids. Designed for artifact-free imaging and enhanced stability, each sponge features unique angular designs that optimize patient positioning during diagnostic procedures. The material is infused with antibacterial and antifungal properties, is self-deodorizing, and complies with California Technical Bulletin 117-2013 standards. The surface is finished in a fresh light mint green coating, enhancing visibility and user orientation. The unit of issue is a single set, and bidders must clearly indicate the source and part number being offered. All packaging must adhere to commercial standards as specified in the procurement document, with each unit sealed in a protective container to prevent damage during transit. Shipments must be packed in suitable exterior containers compliant with commercial shipping requirements, ensuring safe and cost-effective delivery to Fort Bliss, Texas, with a delivery deadline of 20 days after award. Items must be labeled in accordance with Medical Marking Standard No. 1, superseding MIL-STD-129, and all necessary labeling information can be obtained via the DLA Troop Support website or contact. The solicitation, identified as SPE2DH-26-T-5482, has a response deadline of July 30, 2026, and is managed by the Department of Defense’s Medical Supply Chain FSH with Tina Vu as the primary point of contact. The NSN for the item is 6525-01-669-8748, and the purchase request number is 7017598048.
Dental Equipment and Supplies Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339114
New
DIBBS
DENTAL INSTRUMENT KIT,The contract specifies the procurement of a sterile, single-use, disposable dental operative kit designed for use in emergency and austere settings such as at sea or remote deployments. The kit contains three essential instruments: one rigid spatula No. 324, one Woodson No. 2 plunger, and one interproximal carver, each intended to support independent dental care professionals in critical situations where access to traditional dental facilities is limited. The unit of issue is a single kit, with a total quantity of one thousand kits requested under purchase request 7017552952 and delivery required within twenty days of award. The specification incorporates mandatory technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition scale. The contract also includes strict prohibitions against the intentional addition of mercury or mercury-containing compounds to the hardware or supplies, with narrow exceptions for mercury used in batteries, fluorescent lights, sensors, controls, weapon systems, and specific chemical reagents as authorized by NAVSEA; any portable fluorescent lamps or instruments containing mercury must be shockproof and feature a secondary containment boundary to prevent leakage. Packaging must comply with DLA requirements, and government identification must be removed from non-accepted items. Bidders are required to provide the source and part number for the supplied kit, which is identified by NSN 6520-01-701-5743. The solicitation, issued under SPE2DH-26-T-5438 by the Department of Defense’s Medical Supply Chain FSH, closes for responses on July 30, 2026, with performance centered at FPO, 96694, and contact for inquiries is Tina Vu at Tina.Vu@dla.mil.
Dental Equipment and Supplies Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
TRAY, COUNTING, TABLET A
Surgical Appliance and Supplies Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
MOULAGE KIT, BLEEDIN
Surgical and Medical Instrument Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333998
New
DIBBS
TEST TUBE, BLOOD COLLEC
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details