Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

VALVE, BUTTERFLY

Active
SPE4A5-26-T-331TFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for a single butterfly valve identified by NSN 4820-01-104-9226 and part number 397964-1-3, supplied by Honeywell International Inc. under solicitation SPE4A5-26-T-331T, with a required delivery within 170 days of award and a final delivery date of March 3, 2028. The valve is classified as a critical application item and must comply with all technical and quality requirements from the DLA Master List of Technical and Quality Requirements, which supersede any other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with all items labeled and palletized accordingly, while removal of government identification from non-accepted supplies and physical marking of bare items are mandatory. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels of VII, IV, and II for critical, major, and minor characteristics respectively. Cybersecurity Maturity Model Certification Level 2 self-assessment is required, and unit of issue is each (EA) with no variance allowed in quantity. Delivery is FOB origin to Corpus Christi, Texas, with inspection and acceptance occurring at destination. The contract mandates compliance with Defense Federal Acquisition Regulation Supplement (DFARS) provisions and includes specific transportation instructions under DLAD Proc Notes C19 and C20. All documentation and certifications must reflect current DLA policies effective on the solicitation issue date or award date, whichever governs.

General Info

Honeywell to deliver one critical butterfly valve by March 3, 2028, per DFARS, MIL-STD, and DLA requirements.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

332911 - Industrial Valve ManufacturingView NAICS

Place of Performance

DDCT-S 540 FIRST STREET SE, CORPUS CHRISTI, TX, 78419-5255, US

Set-Aside

NONE

Documents

(1)

SPE4A5-26-T-331T.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUS
Contacts
DOMINIQUE HOWARD
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
VALVE,BUTTERFLY
VALVE, BUTTERFLY
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD002, COVERED DEFENSE INFORMATION APPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RT001: MEASURING AND TEST EQUIPMENT
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CRITICAL APPLICATION ITEM
HONEYWELL INTERNATIONAL INC. 59364 P/N 397964-1-3
HONEYWELL INTERNATIONAL INC. 70210 P/N 397964-1-3
SPE4A5-26-T-331T
SECTION B
PR: 7017741163 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017741163 0001 EA 1.000
NSN/MATERIAL:4820011049226
DELIVERY (IN DAYS):0170
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3222
DLA DISTRIBUTION CORPUS CHRISTI TX
DDCT-S 540 FIRST STREET SE
CORPUS CHRISTI TX 78419-5255
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3222
DLA DISTRIBUTION CORPUS CHRISTI TX
GPS USE 100 NAS DR PH 361 431 3728
540 FIRST STREET SE BLDG 1846
CORPUS CHRISTI TX 78419-5255
US
Need Ship Date:01/31/2027 Original Required Delivery Date:03/03/2028
SPE4A5-26-T-331T
SECTION B
PR: 7017741163 PRLI: 0001 CONT’D
SPE4A5-26-T-331T NSN/Part Number: 4820-01-104-9226 Quantity: 1 EA Purchase Request: 7017741163QTY: 1 Delivery: 170 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332911
New
DIBBS
DISK, VALVE
Solicitation # SPE7MC-26-T-168C
The contract is for one disk valve component identified by NSN 4820-01-221-0266 and part number A49678MEA-HF, supplied by Hunt Valve Company, Inc., under solicitation SPE7MC-26-T-168C. Delivery is required within 20 days to the destination FOB, specifically to USS BOXER LHD 4 at FPO AP 96661, with no tolerance for quantity variance. The item must comply with all DLA packaging requirements referenced in MIL-STD-2073-1E and MIL-STD-129, including specific packaging methods, materials, and marking standards, and must be palletized according to DLA guidelines. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses such as batteries, instruments, or sensor systems, and any portable devices containing mercury must be shock-proof and have a secondary containment barrier in accordance with NAVSEA 5100-003D. The supplier must adhere to DLA’s master list of technical and quality requirements, with revisions controlled by the solicitation issue date. The contract specifies inspection and acceptance at the delivery point, and transportation logistics follow DLAD procedural notes C19 and C20. The required delivery date is August 3, 2026, and the point of contact is Paula Mcclary at the Defense Logistics Agency.
Defense Logistics Agency

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SAMPLING, WATE
Solicitation # SPE7MC-26-T-168N
The contract pertains to the procurement of eight sampling valves for water, identified by NSN 4820-01-725-2063 and part number M3479-CAT, supplied by Derbyshire Marine Products, LLC under solicitation SPE7MC-26-T-168N. The requirement mandates strict adherence to DLA’s Master List of Technical and Quality Requirements, which takes precedence over all other standards including ASTM D3951, and packaging must comply with MIL-STD-129 and DLA Packaging Requirements for Procurement. The unit of issue is each, with no variance permitted in quantity, and delivery must occur within 20 days of contract award, FOB origin. Inspection and acceptance occur at the destination. The product must be shipped traceably to the U.S. Coast Guard cutter ESCANABA at 4000 Coast Guard Blvd, Portsmouth VA 23703, with parcel post explicitly prohibited. Packaging must reflect the specified Quantity per Unit Pack and palletization standards per RP001. All items must be properly marked and labeled per government specifications, and the shipment must be coordinated with the provided TCN and project information. The required delivery date is June 18, 2026, and the contract is governed by DLA policies that control revisions for large acquisitions based on RFP issue dates, unless superseded by formal amendments. Point of contact for inquiries is Paula Mcclary at DLA, with additional government-only tracking codes and identifiers specified for internal logistics use.
Defense Logistics Agency

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SAFETY RELIEF
Solicitation # SPE7MC-26-T-168R
The contract specifies the procurement of two safety relief valves, each sized at 1/2 inch, type 940, with a set pressure range of 1001 to 1400 PSI, identified by NSN 4820011513690 and corresponding part numbers from Emerson Automation Solutions and Dante Valve Company. The valves must adhere to strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, and mercury or mercury-containing compounds are prohibited in manufacturing or direct contact unless explicitly exempted for functional uses such as batteries, instruments, or chemical reagents, with portable mercury-containing devices requiring shock-proof construction and dual containment per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with palletization governed by DLA’s RP001 requirements, and the items are to be delivered FOB destination within 20 days, with no variance allowed in quantity. Delivery is split between two U.S. Navy vessels, USS ASHLAND and USS RUSHMORE, with transportation instructions prohibiting parcel post and mandating the fastest traceable means. Both units have the same required delivery date of April 29, 2026, and are subject to inspection and acceptance at the destination. The contract is issued under solicitation SPE7MC-26-T-168R by the Defense Logistics Agency, with procurement governed by DoD unit of issue standards and tracked through VSM for vendor compliance.
Defense Logistics Agency

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
VALVE, BALL
Solicitation # SPE7MC-26-T-168Q
The contract pertains to the procurement of two ball valves identified by NSN 4820-01-528-2876 and part number V24509A-50-05-TR-TB, supplied by B N L INDUSTRIES INC, with a total value of $4.00 at $2.00 per unit. The valves must comply with strict prohibitions against intentional addition or direct contact of mercury or mercury-containing compounds, except in specified exceptions such as functional mercury in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemical reagents explicitly authorized by NAVSEA. Any portable fluorescent lamps or instruments containing mercury must be shock-proof and feature a secondary containment barrier in accordance with NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required. Palletization follows DLA’s RP001 packaging requirements, and delivery is FOB origin within 75 days to a designated receiving facility in Tracy, California. The quantity variance is strictly zero percent, and inspection and acceptance occur at destination. The solicitation, issued under SPE7MC-26-T-168Q, references the DLA Master List of Technical and Quality Requirements for all applicable technical and quality standards, with controls tied to the revision in effect at the time of solicitation or award. Transportation and shipping instructions follow DLAD Procurement Notes C19 and C20, and the point of contact for inquiries is Benjamin Nevitt.
DLA DIST SAN JOAQUIN

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SAFETY RELIEF
Solicitation # SPE7MC-26-T-168B
The contract is for a single safety relief valve identified by NSN 4820-01-046-2098 and part number 41001754, supplied by PTI Technologies Inc., under solicitation SPE7MC-26-T-168B. The item must be delivered in one unit within 20 days from the contract award date, with delivery terms FOB origin and no variance allowed in quantity. Inspection and acceptance occur at the origin, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific packaging codes and methods for preservation and containment. All packaging and palletization must adhere to DLA’s procurement requirements, and the item must be marked in accordance with government standards without special markings. The delivery destination is the Taiwan Army’s Zuoying Ammunition Sub depo in Kaohsiung City, Taiwan, and freight details are governed by DLAD procedure notes. The contract incorporates technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with revisions controlled based on acquisition size and solicitation amendments. The point of contact is Paula McClary, and the original required delivery date is August 7, 2026, with no need for a ship date specified.
Defense Logistics Agency

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
VALVE, REGULATING, FL
Solicitation # SPE7MC-26-T-168M
The contract pertains to the procurement of seven regulating valves, identified by NSN 4820-01-645-4139 and part number 205870-02A, under solicitation SPE7MC-26-T-168M. Delivery is required within 211 days from the award date, with shipment FOB origin and inspection and acceptance occurring at the destination. The quantity is strictly fixed with no variance allowed, and packaging must comply fully with MIL-STD-2073-1E and DLA packaging requirements, including specific methods for preservation, wrapping, and unit containment as detailed in the documentation. Marking must adhere to MIL-STD-129 with no special marking codes applied, and palletization must meet DLA standards. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, with the same location serving as the freight shipping address. The valves are to be delivered by August 18, 2026, with an original required delivery date of February 16, 2027. Technical and quality requirements referenced are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The contract is managed by the Department of Defense under NAICS code 332911, with Alex Xanthakis serving as the primary point of contact, and the item is procured under a simplified acquisition process.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
PARTS KIT, SOLENOID
Solicitation # SPE7MC-26-T-168H
The contract pertains to the procurement of a Parts Kit, Solenoid, identified by NSN 4810014993313 and part number 314946, with a delivery requirement of 20 days and a single unit quantity. Shipment is to be delivered FOB destination to the USS PAUL IGNATIUS (DDG-117) at FPO AA 34087, with no tolerance allowed for quantity variance. Packaging must comply strictly with MIL-STD-2073-1E Appendix D for kits, including preservation methods and marking per MIL-STD-129, with no special marking required. Palletization follows DLA Packaging Requirements, and the unit of issue is listed as KT (Kit). All hardware must be free from intentional addition or direct contact with mercury or mercury compounds, except for functional uses in batteries, fluorescent lamps, required instruments, sensors, weapon systems, or chemically specified reagents approved by NAVSEA. Portable devices containing mercury must be shockproof and feature a secondary containment barrier per NAVSEA 5100-003D. The contract incorporates technical and quality standards from the DLA Master List, and revision control is based on solicitation or award dates depending on acquisition type. Transportation procedures follow DLAD Proc Notes C19 and C20, and government-use fields include tracking identifiers such as RDD 777 and project code EK5 TP 2. The solicitation number is SPE7MC-26-T-168H, issued by the Defense Logistics Agency, with a response deadline of August 17, 2026, and a required delivery date of August 3, 2026.
Defense Logistics Agency

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
SEAT, VALVE
Solicitation # SPE7MC-26-T-168E
The contract is for the procurement of one seat valve with NSN 4820-01-220-5649 under solicitation SPE7MC-26-T-168E, issued by the Defense Logistics Agency. Delivery is required within 20 days to FPO AP 96661, with FOB destination terms, zero variance in quantity, and inspection and acceptance occurring at the delivery point. The item must comply with DLA packaging requirements referenced in RP001 and marking standards per MIL-STD-129, using packaging methods outlined in MIL-STD-2073-1E with specific preservation and containment details. Mercury or mercury-containing compounds are strictly prohibited from direct contact with the valve unless exempted for approved functional uses such as instruments or sensors specified by NAVSEA, and any portable devices containing mercury must include shock-proof design and a secondary containment barrier per NAVSEA 5100-003D. The contract includes special handling instructions for vessel shipments and references to DLA procedures for transportation logistics. Packaging must not bear government identification if the supplies are not accepted. The required delivery date is August 3, 2026, and the point of contact is Paula McClary with DLA, reachable via provided phone and email.
Defense Logistics Agency

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
VALVE, LINEAR, DIRECT
Solicitation # SPE7MC-26-T-168G
The contract pertains to the procurement of a single linear directional control valve, identified by NSN 4820-01-520-4331 and part number 85992-03-PAAG24KP or 85992-03-PAAG24RK, supplied by Parker-Hannifin Corporation. The item is to be delivered in a single unit with a strict quantity variance of plus or minus zero percent, and delivery is required within ten days to the designated military installation at Fort Leonard Wood, Missouri. The delivery terms are FOB origin, with inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 and, more importantly, the DLA Master List of Technical and Quality Requirements, which supersede any conflicting standards. All packaging and labeling are to be executed in accordance with MIL-STD-129, and the unit of issue and quantity per unit pack are strictly defined. Shipment must be transported via traceable freight methods—parcel post is prohibited—and must be palletized per DLA packaging requirements. The consignment is to be routed through the Fort Leonard Wood freight branch with a required RDD annotation and marked for delivery to the US Army Engineer School. The procurement is governed under solicitation SPE7MC-26-T-168G, originally issued with a response deadline in August 2026 and an original required delivery date of August 3, 2026. Government-specific identifiers and codes are embedded for internal tracking and logistics purposes, and all materials must be free of government identification if not accepted. The primary point of contact for this solicitation is Paula McClary, reachable via DLA email and phone.
Defense Logistics Agency

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
DISK, VALVE
Solicitation # SPE7MC-26-T-168L
DDSP NEW CUMBERLAND FACILITY

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
VALVE ASSEMBLY
Solicitation # SPE7MC-26-T-168K
DLA DIST SAN JOAQUIN

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
VALVE, CHECK
Solicitation # SPE7LX-26-U-9297
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 336413
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A5-26-T-331N
The contract is for a single-leg wire rope assembly with part number 0001S00000052 and a quantity of eight units, issued under solicitation SPE4A5-26-T-331N with a delivery deadline of 509 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and non-accepted supplies must have government identification removed. Items must be physically marked per RQ017, and component qualification is required under QPL/QML lists referenced in procurement note H02. Inspection and acceptance occur at the manufacturer’s origin unless otherwise directed. Sampling follows MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned specific verification levels or AQLs; unspecified attributes are treated as major. Zero non-conformances are required for acceptance unless stated otherwise. The item is subject to export controls under ITAR or EAR, with technical data restricted to contractors holding approved JCP certification, having completed required DOD export control training, and received DLA authorization. DFARS 252.225-7048 governs the handling of this controlled data, extending restrictions to all foreign nationals regardless of location. Cybersecurity requirements mandate CMMC Level 2 certification by a C3PAO. Covered defense information is subject to RD002, and the contractor must comply with tailored higher-level quality requirements. Item Unique Identification is not required per customer request, with DFARS 252.211-7003(c)(1)(i) applying. The contract is managed by the Department of Defense’s ASC Supplier Oper OEM Division with performance in New Cumberland, PA, and primary point of contact is Hien-Van Trinh.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 336320
New
DIBBS
LIGHT ASSEMBLY, INDI
Solicitation # SPE4A5-26-T-330Y
This contract involves the supply of a commercial item identified as LIGHT ASSEMBLY, INDI, with part number 2275804-3 and NSN 6220013306650, for a single unit under solicitation SPE4A5-26-T-330Y. The item must be delivered within 20 days of contract award, FOB origin, with zero variance allowed in quantity and inspection and acceptance occurring at the origin. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, using specified methods for preservation, wrapping, cushioning, and marking, with plastics avoided where possible. Palletization follows DLA packaging requirements, and no special marking is required. Technical and quality standards referenced by R or I numbers are governed by the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition size. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise specified, with attribute levels defined for critical, major, and minor characteristics. Item Unique Identification is not required per the Service customer’s request. The item is destined for the Taiwan Army at Kaohsiung, with shipment coordinated through designated freight protocols and referencing specific DLA procedural notes. The original required delivery date is August 7, 2026, and the contract was posted on August 5, 2026, with responses due by August 13, 2026.
Motor Vehicle Electrical and Electronic Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
CLAMP, BLOCK
Solicitation # SPE4A5-26-T-331D
The contract pertains to the procurement of 101 units of CLAMP, BLOCK with NSN 1560016946944 and part number 842-349845-14, intended for a critical application under The Boeing Company. Delivery is required within 170 days from the contract date, with FOB origin terms and inspection and acceptance occurring at the destination. The item must comply with stringent packaging and marking standards including MIL-STD-2073-1E and MIL-STD-129, with no special marking required. Packaging must adhere to DLA’s procurement standards, and palletization follows RP001 guidelines. The part is subject to FAA bare item marking requirements and airworthiness approval under RQ019, necessitating a Certificate of Airworthiness and Conformance. Supply chain traceability documentation must be retained per DLA Directive Procurement Notes C03, and configuration change management is governed by RQ002. Sampling and quality verification must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attribute levels are predefined as VII, IV, and II for critical, major, and minor characteristics respectively. The acquisition falls under simplified procedures, with technical and quality requirements referenced from the DLA Master List, and no unit of issue translation is needed as the DoD unit is used. All applicable CDRLs and technical data packages are to be reviewed, with the delivery address specified as the DLA Distribution facility in New Cumberland, PA. The contract solicitation was posted on August 5, 2026, with a response deadline of August 13, 2026, and the original required delivery date is September 3, 2027.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, ROLLER, AIRF
Solicitation # SPE4A5-26-T-331L
This solicitation requires the procurement of a roller bearing designated as BEARING, ROLLER, AIRF with NSN 3110-01-662-3661, with a total quantity of nine units to be delivered within 154 days. The bearing must be manufactured entirely in the United States, its outlying areas, or Canada, and the cost of all bearing components—including rolling elements, retainer, inner race, and outer race—produced in these regions must exceed 50% of the total component cost, as mandated by DFARS Clause 252.225-7016. A completed Contractor’s Declaration, obtainable from the DLA Foreign Bearing Waiver website, is mandatory for consideration; failure to submit this documentation will disqualify the quote. In the event no compliant offerings are received, the solicitation may be canceled or held pending a waiver request under DFARS 225.7009-4. The item is designated as a Critical Application Item and must comply with Federal Aviation Administration airworthiness requirements, including the submission of a Certificate of Airworthiness and Conformance. Technical and quality requirements are governed by the DLA Master List, with applicable revisions controlled by the solicitation or award date. Packaging and preservation must adhere strictly to MIL-STD-2073-1E and MIL-DTL-197M, with specific preservation methods determined by bearing type and closure, and protective compounds selected according to prescribed tables. Marking must follow MIL-STD-129, and palletization must comply with DLA packaging standards. The item is subject to zero-defect sampling under MIL-STD-1916 or ASQ H1331, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Supply chain traceability documentation is required as per DLA Directive Procurement Note C03, and contractors must retain all related records. Configuration change management, removal of government identification from non-accepted items, and FAA bare item marking requirements are also applicable. Inspection and acceptance occur at the destination, with no variance allowed in quantity. The unit of issue is each, with a total price of $9.00 per unit, and the order is being procured by the Department of Defense under Solicitation SPE4A5-2
Ball and Roller Bearing Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE4A5-26-T-331S
This contract pertains to the procurement of a window panel for aircraft, specifically identified by part number 205-030-285-002 and 205-030-285-2, with a total quantity of 51 units to be delivered within 127 days under contract SPE4A5-26-T-331S. The item is designated as a critical application component, and delivery is FOB origin with inspection and acceptance occurring at the destination. Strict packaging requirements mandate compliance with MIL-STD-129 and either FED-STD-313 for hazardous materials or ASTM D3951 for non-hazardous items, with all DLA Master List of Technical and Quality Requirements taking precedence. Item Unique Identification is not required per the service customer’s request, and physical marking must follow RQ017 guidelines. Quality assurance requires adherence to ISO 9001:2015 for manufacturers and non-manufacturers, and sampling must follow MIL-STD-1916 or ASQ H1331, with zero non-conformances required unless otherwise specified. Cybersecurity compliance includes a CMMC Level 2 self-assessment, and the contractor must handle covered defense information in accordance with RD002. A first article test is mandated as a separate line item, with one unit required for testing; pricing for this line item must be included in the offer, though no award will be made if the test is waived. The delivery address is DLA Distribution Cherry Point in North Carolina, and transportation must comply with DLAD procedural notes C19 and C20. The contract enforces a zero variance in quantity, and all packaging must be palletized per DLA packaging requirements.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
MODULE ASSEMBLY, FRE
Solicitation # SPE4A5-26-T-331C
This contract pertains to the procurement of one unit of a Module Assembly, Frequency, with NSN 6110-00-885-2327 and part number 690416, supplied by Hamilton Sundstrand Corporation under contract SPE4A5-26-T-331C. Delivery is required within 170 days from the award date, with shipment originating FOB origin and inspection and acceptance occurring at the destination. The item is not subject to Item Unique Identification per government request, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, which supersede any conflicting standards. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization in accordance with DLA Packaging Requirements, and all markings and labeling must adhere strictly to applicable military standards. Sampling and quality verification must follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise specified; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The contractor must comply with Cybersecurity Maturity Model Certification Level 2 self-assessment requirements and manage configuration changes through Engineering Change Proposals or formal variance requests. Removal of government identification from non-accepted supplies is required, and measuring and test equipment must meet specified standards. The delivery address is DLA Distribution Depot Hill in Hill AFB, Utah, with a final ship date of January 31, 2027 and an original required delivery date of May 21, 2028. The unit of issue is each (EA), with no quantity variance permitted, and all documentation and compliance responsibilities are binding under the terms outlined in the solicitation.
Other Measuring and Controlling Device Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
AXLE ASSEMBLY
Solicitation # SPE4A5-26-R-0264
The procurement is for 51 axle assemblies, NSN 1615-01-502-6255, part number 96250-32107-041, intended for use in the H-60 Seahawk helicopter, with a firm-fixed price contract structure and delivery required within 260 days from award to New Cumberland, PA. Only approved sources—Sikorsky Aircraft Corporation and Delta-Ray Industries Inc.—are currently authorized to supply this item, and any other manufacturer must submit a full source approval package to be considered. Technical data, specifications, or drawings are not available from the Government, and requests for such information will not be accepted. FOB Origin inspection and acceptance apply, and the item is classified as a Critical Safety Item, subject to the Supplier Performance Risk System. The acquisition is unrestricted, and all responsible sources may submit offers evaluated based on price, past performance, and other criteria outlined in the solicitation. The solicitation will be accessible via the DIBBS system and upon direct request to the buyer, with an anticipated posting date of August 5, 2026, and a response deadline of August 4, 2026. The contract is managed by DLA Aviation under the Department of Defense, with primary point of contact Samuel Kogi at the Richmond, VA office.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 30 days
View Details
NAICS: 336413
New
DIBBS
PLATE, STRUCTURAL, AI
Solicitation # SPE4A5-26-T-331U
The contract is for the procurement of 18 units of a structural plate designated as P/N 901-031-171-140 with NSN 1560-01-595-9330, classified as a Critical Application Item under the Boeing Company. Delivery is required within 170 days to the destination specified as DLA Distribution San Diego, with FOB Origin terms and zero tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-129 for marking and labeling, with hazardous materials subject to TQ requirement IP025 per FED-STD-313 and non-hazardous items to ASTM D3951, though all DLA Master List requirements supersede ASTM standards. Packaging and palletization must meet DLA’s RP001 requirements, and sampling for quality verification follows MIL-STD-1916 or ASQ Z1.4 with zero non-conformances required unless otherwise stipulated, with critical, major, and unspecified attributes assigned verification levels or AQLs of VII/0.1, IV/1.0, and II/4.0 respectively. The supplier must comply with DLA’s technical and quality requirements referenced by R and I numbers from the official DLA Master List, and implement CMMC Level 2 self-assessment for cybersecurity. Government identification must be removed from non-accepted supplies, and the unit of issue is each (EA). The contract was solicited under SPE4A5-26-T-331U with a response deadline in August 2026 and a required delivery date of September 28, 2027, though a ship date of January 31, 2027, has been noted.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332439
New
DIBBS
SHIM
Solicitation # SPE4A5-26-T-331R
The contract specifies the procurement of a commercial item, a shim identified by part number 2664022-009 and NSN 5365012243742, with a quantity of three units to be delivered within five days of contract award. Delivery is FOB origin, with inspection and acceptance points set at the destination, and no variance in quantity is permitted. Packaging must comply with MIL-STD-2073-1E, with specific preparation methods and materials outlined, and marking must adhere to MIL-STD-129 with no special marking required. Palletization follows DLA packaging requirements, and shipment must be sent by the fastest traceable means, explicitly excluding parcel post. The delivery address is Tinker Air Force Base, Oklahoma, with a designated receiving point and contact information provided for government logistics coordination. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with revisions tied to the solicitation or award date depending on acquisition size. Sampling procedures follow MIL-STD-1916 or ASQ H1331, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Zero non-conformances are required in sampling unless otherwise stated. Unit of issue is each (EA), and the item is not subject to Item Unique Identification under DFARS 252.211-7003(c)(1)(i) due to service customer request. The solicitation number is SPE4A5-26-T-331R, with a response deadline of August 13, 2026, and an original required delivery date of July 31, 2026. Contract administration and point of contact are managed by the Department of Defense’s ASC Supplier Oper OEM Division, with Jessica Baake as the primary liaison.
Other Metal Container Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 334417
New
DIBBS
ADAPTER, CONNECTOR
Solicitation # SPE4A5-26-T-330U
This contract specifies the procurement of an adapter connector with part number 30-269-2P20F07 and NSN 5935-01-466-6841, for a quantity of five units to be delivered FOB origin within 170 days, with a required ship date of January 31, 2027, and an original delivery deadline of April 20, 2028. The contract enforces strict compliance with DLA packaging requirements, MIL-STD-2073-1E for preparation, and MIL-STD-129 for marking, with no special marking required. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise defined, with verification levels of VII, IV, and II assigned to critical, major, and minor attributes respectively; unspecified attributes are treated as major. The product is classified as a critical application item and must meet all technical and quality requirements listed in the DLA Master List, incorporating referenced R and I numbers. Cybersecurity compliance requires a CMMC Level 2 self-assessment. The item is subject to configuration change management procedures, variance requests, and removal of government identification from non-accepted supplies. Physical identification and bare item marking are mandatory per RQ017. Delivery is to be made to DLA Distribution San Joaquin at Tracy, California, with no quantity variance permitted. Transportation instructions align with DLAD Proc Notes C19 and C20, and all documentation must adhere to the contract’s unit of issue and sourcing standards.
Electronic Connector Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 335139
New
DIBBS
LAMP, INCANDESCENT
Solicitation # SPE4A5-26-T-331M
This contract specifies the procurement of 161 incandescent lamps identified by NSN 6240016715328 and part number 767 from General Electric Company DBA GE, with delivery required within 21 days to Industries of the Blind Inc in Greensboro, NC. The item is classified as a commercial off-the-shelf (COTS) product and is designated as a critical application item, subject to strict technical and quality standards. All requirements referenced in the DLA Master List of Technical and Quality Requirements, including packaging, preservation, marking, and traceability, must be strictly followed per DLA directives. Supply chain traceability documentation must be retained by the contractor in compliance with DLAD Procurement Note C03 from August 2016. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with special fragile labeling and palletization meeting DLA packaging guidelines. Inspection and acceptance occur at the destination, with zero tolerance for non-conformances under sampling standards such as MIL-STD-1916 or ASQ H1331, unless otherwise specified. The contract mandates FAA airworthiness approval and bare item marking compliance, with additional quality controls governed by Reference QAP 13873. The unit of issue is each (EA), priced at $161.00 for a total contract value of $25,921.00, with no quantity variance allowed. Delivery is FOB origin, and transportation protocols must follow DLA Procurement Notes C19 and C20. The government has explicitly deemed surplus material unacceptable for this NSN, and the item requires full compliance with all federal aviation and defense procurement regulations.
Electric Lamp Bulb and Other Lighting Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
New
DIBBS
SUPPORT, STRUCTURAL
Solicitation # SPE4A5-26-Q-0669
The contract specifies the procurement of five units of a structural support item identified by NSN 1560-01-723-2281 under solicitation SPE4A5-26-Q-0669, with a firm fixed price and no variance allowed in quantity. Delivery is required 127 days after award date, with inspection and acceptance occurring at origin, and the item must be shipped FOB destination. Packaging requirements are strictly governed by DLA standards, including MIL-STD-129 for marking and labeling, and compliance with RP001 for DLA packaging, where hazardous materials must adhere to FED-STD-313 and IP025, while non-hazardous materials must meet ASTM D3951 unless superseded by higher-priority DLA technical requirements. Unit of issue is each, and palletization must conform to DLA guidelines. Sampling follows Sikorsky Corporation’s approved alternate plan QAP 1201, which must meet or exceed ASQ H1331 or MIL-STD-1916 standards, and item unique identification is not required per the service customer’s request. All technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition type. The delivery address is the DLA Distribution DDSP New Cumberland Facility, and transportation instructions reference DLAD Proc Note C19 and C20. The material is needed for delivery by January 9, 2027, under purchase request 7014629782.

POSTED

about 1 hour ago

DEADLINE

in 4 days
View Details