Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

VALVE, CHECK

Active
SPE7MC-26-T-139KFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of a single check valve, size 4 inches, manufactured by Milwaukee Valve Co., Inc., with part number 35833-4IN and NSN 4820-01-554-8677. The item must comply with all technical and quality requirements from the DLA Master List of Technical and Quality Requirements, and the revision in effect on the solicitation issue date controls compliance. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the valve unless part of exempted functional components such as batteries, lighting, sensors, weapons systems, or specified chemical reagents under NAVSEA guidance; portable devices containing mercury must be shockproof with a secondary containment barrier per NAVSEA 5100-003D. The valve is to be packaged and marked consistent with MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletized according to DLA packaging standards. Delivery is FOB origin to the specified receiving warehouse in Tracy, California, with a required delivery date of October 14, 2026, and a need ship date of June 2, 2027. A 309-day delivery window applies, with zero variance allowed in quantity, and inspection and acceptance occur at the destination. The contract is under solicitation SPE7MC-26-T-139K, issued by DLA Dist San Joaquin under NAICS code 332911, with Paula McClary as the primary point of contact.

General Info

4-inch check valve, Milwaukee Valve Co., part 35833-4IN, NSN 4820-01-554-8677, deliver to Tracy, CA by October 14, 2026, no mercury, MIL-STD compliant.

Agency

Department Of Defense → DLA DIST SAN JOAQUINView Agency

NAICS

332911 - Industrial Valve ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7MC-26-T-139K Maritime Hardware/Electrical

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA DIST SAN JOAQUIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DLA DIST SAN JOAQUIN
View Agency Profile
Office AddressUS
Contacts
Paula Mcclary
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
VALVE,CHECK
VALVE,CHECK
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
4 INCH VALVE SIZE
MILWAUKEE VALVE CO, INC 76364 P/N 35833(4.00)
MILWAUKEE VALVE CO, INC 76364 P/N 35833-4IN
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017527913 0001 EA 1.000
NSN/MATERIAL:4820015548677
DELIVERY (IN DAYS):0309
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
SPE7MC-26-T-139K
SECTION B
PR: 7017527913 PRLI: 0001 CONT’D
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:31 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:JA CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:06/02/2027 Original Required Delivery Date:10/14/2026
SPE7MC-26-T-139K NSN/Part Number: 4820-01-554-8677 Quantity: 1 EA Purchase Request: 7017527913QTY: 1 Delivery: 309 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332911
New
DIBBS
VALVE, SAFETY RELIEFThe contract is for the procurement of ten safety relief valves identified by NSN 4820010147872 and part number 38-483 from HYDRO-AIRE AEROSPACE CORP, designated as a critical application item for the E/I E-3A AWACS aircraft. The requirement is issued under solicitation SPE7MC-26-T-155X with a delivery window of 200 days and a final delivery deadline of October 24, 2025, though an earlier ship date of June 3, 2025, is preferred. The valves must be delivered FOB origin with zero tolerance for quantity variance and are subject to inspection and acceptance at the destination. All packaging and labeling must comply with MIL-STD-129 and ASTM D3951, but DLA Master List of Technical and Quality Requirements take precedence over ASTM standards. Packaging and palletization must adhere to DLA’s RP001 requirements. The delivery address is the DLA Distribution Depot in Tinker AFB, Oklahoma, and transportation logistics follow DLAD Proc Note C19 and C20. The unit of issue is each, with a total contract value based on a unit price for ten units. Technical and quality specifications referenced by R or I numbers are governed by the DLA Master List in effect on the relevant solicitation or award date, depending on procurement scale. The point of contact for the contract is Alex Xanthakis at DLA Procurement, with the solicitation posted July 27, 2026, and responses due by August 7, 2026.
DEPOT OKLAHOMA

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
PARTS KIT, DIAPHRAGM REThe contract specifies the procurement of a Parts Kit, Diaphragm Replacement, with a quantity of six units under the NSN 4820-01-673-8665 and part number 9910-KIT1721, issued by the DLA New Cumberland Facility under solicitation SPE7MC-26-T-139P. The delivery is set for 163 days after order placement, with an original required delivery date of October 14, 2026, and a need ship date of January 7, 2027. All items must be shipped FOB origin to the designated delivery point at 2083 Normandy Drive, Door 113 to 134, New Cumberland, PA 17070-5002, with inspection and acceptance occurring at the destination. Packaging must strictly adhere to MIL-STD-2073-1E, including Appendix D for kits, and palletization must meet DLA’s RP001 requirements. Preservation and packaging data fields are coded as ZZ or Z where applicable, indicating contractual or custom specifications. Marking requirements follow MIL-STD-129, mandating barcoding and labeling, including a special marking code of ZZ for unique contract requirements. Hazardous materials, if any, must comply with OSHA’s Hazard Communication Standard and require pre-award submission of Safety Data Sheets, with labeling also meeting MIL-STD-129. Clause 52.223-3 includes a fill-in table for hazardous material identification, while 252.223-7001 reinforces labeling obligations. The contract employs a fixed-price structure with a 0% variance on quantity. The solicitation references compliance with FAR and DFARS clauses related to cybersecurity, trafficking, employment verification, sustainable products, and contractor reporting of cyber incidents. The Unique Entity Identifier and CAGE code are required for representation, and the offeror must confirm small business status, though no socioeconomic set-aside is specified. Payment is to be processed via Wide Area WorkFlow, and the contract includes clauses for contractor accountability, whistleblower rights, and limitation on use of third-party cyber incident data. No pricing details are present in the available data, and the contract value remains undefined. No attachments or formal evaluation factors are provided in the solicitation package, and no Contracting Officer’s Representative or technical point of contact is named, with
DDSP NEW CUMBERLAND FACILITY

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332911
New
DIBBS
VALVE, STOP-CHECKThe contract pertains to the procurement of eight units of a stop-check valve identified by NSN 4820-01-514-8060, with a unit price of $8.00 per unit and a total value of $64.00, under solicitation SPE7MC-26-T-136P issued by DLA Land and Maritime, San Joaquin. Delivery is required within seven days of the contract award, with origin FOB terms, and must be shipped to the designated receiving warehouse in Tracy, California. The item is subject to the DLA Master List of Technical and Quality Requirements, which supersedes all other standards including ASTM D3951 for packaging, and mandates compliance with MIL-STD-129 for marking and labeling. Palletization must follow RP001 DLA Packaging Requirements, and the valve must be free of intentional mercury or mercury-containing compounds except for specific functional exemptions such as batteries, instruments, weapon systems, or reagents as defined by NAVSEA, with portable mercury-containing devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. The contract incorporates numerous FAR and DFARS clauses addressing cybersecurity, safeguarding defense information, reporting cyber incidents, prohibited communications equipment, whistleblower protections, trafficking in persons, employment eligibility verification, equal opportunity for workers with disabilities, hazardous material identification, sustainable product requirements, and the buy American Act. Offerors must maintain active SAM registration and submit accurate representations regarding small business status, covered defense telecommunications equipment, and socioeconomic certifications, with compliance verified through SAM. A Safety Data Sheet for any hazardous materials is mandatory for award eligibility, and failure to submit one renders the offeror nonresponsible. The contract also requires adherence to DPAS priority rating for national defense purposes, with cost or pricing data governed by a deviation to DFARS 252.215-7994, and mandates use of WAWF for invoicing and receiving reports unless exceptions apply. All documentation and performance must comply with federal regulations including NIST SP 800-171 requirements, and any non-domestic materials necessitate full disclosure. The solicitation is not a small business set-aside but allows for HUBZone price evaluation preferences unless waived.
DLA DIST SAN JOAQUIN

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SAFETY RELIEFThe contract is for the procurement of 11 units of a safety relief valve identified by NSN 4820-01-302-8976, issued under solicitation SPE7MC-26-T-138U by the Defense Logistics Agency (DLA) San Joaquin. Delivery is required to the receiving warehouse in Tracy, California, with an original required delivery date of October 14, 2026, and a need ship date of January 13, 2027, allowing for a 169-day delivery window as directed. The item is classified as a critical application item and is subject to strict technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements. The valve must be packaged in accordance with MIL-STD-2073-1E using preservation method AE, with cleaning and drying procedures specified, and marked per MIL-STD-129 with no special marking required. Palletization must comply with DLA Packaging Requirements RP001. The contract prohibits the use of Class I ozone-depleting chemicals and any intentional addition of mercury or mercury-containing compounds, except in specified functional applications such as batteries, fluorescent lights, and instruments as authorized by NAVSEA 5100-003D, which also mandates shock-proof design with a secondary containment for portable mercury-containing devices. Inspection and acceptance are performed at origin by the government under FAR 52.246-2 and DLA requirements, with no tolerance allowed in quantity—plus or minus zero percent. Payment must be submitted electronically through Wide Area WorkFlow (WAWF), and invoicing follows DFARS requirements for electronic submissions. All contractors must comply with federal and defense regulations including FAR and DFARS clauses covering equal opportunity, trafficking in persons, employment eligibility verification, sustainable products, cybersecurity safeguards under NIST SP 800-171, prohibition of hexavalent chromium, export control, hazardous material handling, and subcontracting practices. Offerors must provide current Unique Entity ID and CAGE code, and affirm size and socioeconomic status including small business, disadvantaged, veteran-owned, or HUBZone status if applicable, with full compliance with SAM.gov representations. The contract type remains unfilled pending award, and no pricing is stated in the line item, indicating that price evaluation will occur during the selection process. The contract is subject to change under FAR 52.243-1,
DLA DIST SAN JOAQUIN

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332911
New
DIBBS
DISK, VALVE
DLA DIST SAN JOAQUIN

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
VALVE, BALL
FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SOLENOID
Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SAFETY RELIEF
Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
VALVE, REGULATING, OXYGEThe contract specifies the procurement of 50 units of a regulating valve for oxygen system pressure, identified by NSN 4820017357588 and part number 0799-1848 from ESAB NORTH AMERICA INC, under solicitation SPE7MC-26-T-140C. This is a total small business set-aside contract with a NAICS code of 332911, requiring delivery by March 6, 2027, 221 days from the award date, FOB origin, with no variance allowed in quantity. Inspection and acceptance occur at the destination, specifically at the DDSP New Cumberland Facility in Pennsylvania, and all items must comply with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, including barcoding and hazardous material labeling. The valve must be preserved using method AE with no preservation material, packed in unit container D3 and intermediate container E5, palletized per DLA’s RP001 requirements, and marked with no special markings. Strict environmental restrictions prohibit the intentional use or incorporation of ozone-depleting chemicals and mercury or mercury-containing compounds, except for limited exempted applications such as batteries, sensors, and certain instruments as defined by NAVSEA 5100-003D, which also mandates secondary containment for portable fluorescent lamps and instruments containing mercury. Technical and quality requirements referenced by R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, and all work must meet applicable federal specifications and regulations, including the Hazard Communication Standard and sustainable product guidelines. The contract incorporates multiple FAR and DFARS clauses covering employment equity, trafficking in persons, hazardous materials identification, cybersecurity safeguards for covered defense information, whistleblower rights, electronic payment via WAWF, accelerated payments to small business subcontractors, and prohibitions on certain foreign-sourced equipment. Offerors must maintain an active UEI and CAGE code, represent their size status accurately in SAM.gov, and submit proposals exclusively through the DIBBS portal by the deadline of July 30, 2026. No contract value is specified in the pricing section, as the unit price field is incomplete or placeholder, and no option quantities or additional CLINs are provided, leaving the total contract value undefined.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332911
New
DIBBS
SEAT, VALVE
FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
VALVE, VENT
DLA DIST SAN JOAQUIN

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
VALVE, PLUG
DLA DIST SAN JOAQUIN

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → DLA DIST SAN JOAQUIN

Same awarding agency

NAICS: 335999
New
DIBBS
POWER SUPPLYThe contract solicits two power supply units under NSN 6130-01-632-2182 with delivery required 111 days after award, FOB origin, and final acceptance at the designated destination in Tracy, California. The contractor must comply with stringent technical and quality requirements from the DLA Master List of Technical and Quality Requirements, which take precedence over all other standards including ASTM D3951 and MIL-STD-129 for packaging and labeling. Packaging must adhere to DLA’s RP001 for palletization and MIL-STD-129 for marking, with unit of issue and quantity per unit pack strictly controlled. Sampling procedures are governed by MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required for acceptance unless otherwise specified, and any attributes identified as critical, major, or minor must be verified at Level VII, IV, or II with corresponding AQLs of 0.1, 1.0, or 4.0. The power supply must not contain intentional mercury or mercury compounds except in specific exempted applications such as batteries, fluorescent lamps, sensors, or weapon systems, and any portable devices containing mercury must be shockproof with a secondary containment per NAVSEA 5100-003D. Cybersecurity compliance is required under CMMC Level 2 with a self-assessment, and additional DFARS clauses mandate NIST SP 800-171 assessments, hazardous material labeling per OSHA and federal statutes, and electronic invoicing exclusively through WAWF. The procurement falls under a simplified acquisition with no specified contract type, and payments are subject to accelerated terms for small business subcontractors. The offeror must provide a Unique Entity Identifier and CAGE code, represent their small business status and socioeconomic category if applicable, certify compliance with trafficking and employment verification requirements, and submit Safety Data Sheets for any hazardous materials prior to award. All deliveries are subject to destination inspection and acceptance by the government, with no tolerance for quantity variance, and failure to meet any technical, packaging, or cybersecurity requirement may result in rejection.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335999
New
DIBBS
ADAPTER, BATTERY CHA
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335910
New
DIBBS
BATTERY, NONRECHARGEThe contract is for the procurement of 59 nonrechargeable lithium thionyl chloride batteries with a Type I shelf life of 60 months that is non-extendable, identified by NSN 6135-01-591-1250 and part number LTC-7PN-S4 from EaglePicher Technologies LLC. The batteries are classified as a critical application item and must adhere to strict packaging, marking, and shipping standards, including MIL-STD-2073-1E and MIL-STD-129, with special marking code 32 indicating the Type I shelf life. Packaging must comply with DLA’s procurement requirements and hazardous materials handling guidelines under IP025, prohibiting intentional mercury contamination except where functionally required in specific applications like batteries, with additional containment requirements for mercury-containing portable devices. Sampling and quality verification follow MIL-STD-1916 or equivalent zero-based plans with acceptance criteria of zero non-conformances unless otherwise specified, and attributes are assigned verification levels or AQLs as defined. Delivery is FOB destination, with inspection and acceptance occurring upon arrival at the designated warehouse in Tracy, California, and must be fulfilled within 200 days of award, with an original required delivery date of October 14, 2026 and a need ship date of February 13, 2027. The unit price is $59.00 per unit, totaling $3,481, under purchase request 7017528793. All technical and quality requirements referenced are governed by the DLA Master List, with revisions effective as of the solicitation issue or award date depending on acquisition size, and the contract is issued under solicitation SPE7L7-26-T-4350 with NAICS code 335910.
Battery Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333415
New
DIBBS
DISPENSER, DRINKING WATThe contract is for the procurement of 15 drinking water dispensers with the NSN 4510-01-470-2455 under solicitation SPE8E8-26-T-4747, issued by the DLA Dist San Joaquin, a Department of Defense agency. The items must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with the applicable revision controlled by the solicitation issue date or award date depending on acquisition size. The dispensers are required to operate on 120V/60Hz/1PH and must not contain or come into direct contact with mercury or mercury-containing compounds, except for functional uses in batteries, fluorescent lights, sensors, controls, weapon systems, or specific chemical reagents as defined by NAVSEA. Any portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment barrier, in accordance with NAVSEA 5100-003D. Covered defense information provisions apply, and all non-accepted supplies must have government identification removed prior to return. The delivery deadline is 106 days after award, with the place of performance set in Tracy, California, 95304-5000. The solicitation opens on July 16, 2026, and responses are due by July 27, 2026, with primary contact information provided for Alexis Selby at DLA. The contract falls under NAICS code 333415 for commercial and industrial machinery and equipment manufacturing.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332911
New
DIBBS
PARTS KIT, VALVEThis contract is for a Parts Kit, Valve with NSN 4820016925507 and part number WP121-12KF-LCS, issued by DLA Dist San Joaquin under solicitation SPE7MC-26-T-139V. The requirement calls for three kits, each unit measured in KT, to be delivered FOB origin within 214 days, with a firm delivery date of February 27, 2027, and no variance allowed in quantity. Inspection and acceptance occur at the destination, specifically at the receiving warehouse in Tracy, California. The kit must comply with MIL-STD-2073-1E for preservation and packaging, specifically Appendix D for kits, and all marking must follow MIL-STD-129. Packaging must adhere to DLA’s RP001 requirements, including palletization and the use of specific preservation and packing methods designated by codes ZZ. Technical and quality specifications referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on the acquisition size. The item is classified as a Critical Application Item, and all government identification must be removed from non-accepted supplies. The point of contact for the solicitation is Paula Mcclary, with inquiries directed to the provided email and phone number.
Industrial Valve Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332911
New
DIBBS
VALVE, BALLThe contract pertains to the procurement of three ball valves, identified by NSN 4820-01-416-3287 and part number V24509-24-00, supplied by B N L Industries Inc. The valves are classified as a critical application item and must comply with strict technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, including restrictions on intentional incorporation or direct contact of mercury or mercury-containing compounds, except for specified functional uses such as in certain instruments, sensors, or chemical reagents approved by NAVSEA. Portable devices containing mercury must meet shock-proof and secondary containment requirements per NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E with specific methods for preservation, wrapping, and containment, and marking must follow MIL-STD-129 without special marking codes. The contract requires delivery FOB origin within 125 days, with zero variance allowed in quantity. Inspection and acceptance occur at the destination, with delivery directed to DLA Dist San Joaquin in Tracy, California. The original required delivery date is June 6, 2026, though the need ship date is February 3, 2026. Transportation and freight details are governed by DLA procedural notes C19 and C20. The solicitation number is SPE7MC-26-T-119W, issued under NAICS code 332911, with response deadlines and posting dates falling in July 2026, and the point of contact is Paula McClary at DLA.
Industrial Valve Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332911
New
DIBBS
VALVE, CHECK
Industrial Valve Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details