Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

VALVE, CHECK

Active
SPE7MC-25-T-219AFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 12 check valves with NSN 4820-00-420-2806 under solicitation number SPE7MC-25-T-219A, issued by the Department of Defense through the Warner Robins agency. The requirement mandates compliance with DLA packaging standards and incorporates all technical and quality specifications referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions. Delivery is required within 167 days after award, and the place of performance is identified as Robins AFB, Georgia, 31098-1887. The offeror must submit a complete data package including full documentation for both the approved part and any alternate part, as no prior data is available. The solicitation was posted on August 4, 2026, with responses due by August 7, 2026, and the NAICS code 332911 applies to the classification of this procurement. Primary point of contact is Paula McClary, reachable at fmda3302@dla.mil or 614-692-0417, and full solicitation details are accessible via the DIBBS portal.

General Info

Procure 12 check valves NSN 4820-00-420-2806, deliver to Robins AFB GA within 167 days, comply with DLA standards.

Agency

Department Of Defense → WARNER ROBINSView Agency

NAICS

332911 - Industrial Valve ManufacturingView NAICS

Place of Performance

BLDG 376, ROBINS A F B, GA, 31098-1887, US

Set-Aside

NONE

Documents

(1)

SPE7MC-25-T-219A.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → WARNER ROBINS
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → WARNER ROBINS
View Agency Profile
Office AddressUS
Contacts
Paula Mcclary
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
VALVE,CHECK
VALVE,CHECK
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
NO DATA IS AVAILABLE. THE ALTERNATE OFFEROR IS
REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE
INCLUDING DATA FOR THE APPROVED AND ALTERNATE
PART FOR NSN/Part Number: 4820-00-420-2806 Quantity: 12 EA Purchase Request: 7013472347QTY: 12 Delivery: 167 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332911
New
DIBBS
VALVE, CHECK
Solicitation # SPE7M1-26-T-248U
A check valve with NSN 4820-01-646-8828 and part number 509-700-112 is being procured in a quantity of 50 units under solicitation SPE7M1-26-T-248U, with a total contract value of $2,500 at $50 per unit. Delivery is required within five days of award, FOB destination, with no variance allowed in quantity and inspection and acceptance occurring at the delivery point. All packaging must comply with ASTM D3951 and be marked and labeled per MIL-STD-129, with DLA’s Master List of Technical and Quality Requirements taking precedence over any referenced standards. The item must be palletized in accordance with DLA packaging requirements and shipped to the designated military address at Yokosuka Naval Base, Japan, with the point of contact for inquiries being Misty Eckard. The original required delivery date is August 5, 2026, and the contract incorporates all applicable technical, quality, and packaging specifications from the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition size.
MARITIME SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
SEAT, VALVE
Solicitation # SPE7MC-26-T-167V
The contract pertains to the procurement of two valve seats, identified by NSN 4820-01-416-4586 and part number SW142-14 from Emerson Automation Solutions, under solicitation SPE7MC-26-T-167V. Deliveries are required within 154 days of contract award, with shipment FOB origin and final inspection and acceptance occurring at the destination facility located at the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129, using specified methods including preservative type 31, dry conditions, and J-A wrap material with a unit container code D3. No special marking is required, and palletization must adhere to DLA packaging standards. The item is classified as a critical application item, and mercury or mercury-containing compounds are prohibited from intentional addition or direct contact with the hardware, except for functional uses in batteries, fluorescent lamps, sensors, or instrument controls, provided they meet NAVSEA 5100-003D containment requirements. The contract incorporates all applicable technical and quality requirements listed in the DLA Master List, with revision control tied to the solicitation issue date. The unit of issue is each, with a total quantity of two units at a unit price of $0.00, resulting in a total contract value of $0.00. The contract was posted on August 4, 2026, with a response deadline of August 17, 2026, and the original required delivery date is August 15, 2027.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
VALVE, BALL
Solicitation # SPE7M1-26-T-248N
A ball valve is being procured for use in the E/I hydraulic system with the NSN 4820-01-516-5621, quantity one, under purchase request 7017726989. This is a commercial off-the-shelf item, and the procurement is governed by DLA packaging requirements and technical and quality specifications referenced through the DLA Master List of Technical and Quality Requirements, where revisions are controlled based on the solicitation or award date depending on acquisition size. The item is subject to the requirement for removal of government identification from non-accepted supplies. Delivery must be completed within five days of award, with the place of performance specified as Jacksonville, Florida, zip code 32226-3404. The solicitation number is SPE7M1-26-T-248N, posted on August 4, 2026, with responses due by August 17, 2026. The NAICS code is 332911 and the procuring agency is the U.S. Department of Defense through the Maritime Supply Chain. The primary point of contact is Misty Eckard, reachable via email and phone provided.
MARITIME SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
SEAT, VALVE
Solicitation # SPE7M4-26-T-274M
The contract involves the procurement of a seat valve with NSN 4820012493675 under solicitation SPE7M4-26-T-274M, issued by the Defense Logistics Agency’s Fluid Handling Division. A total of 21 units are required, to be delivered within 191 days after delivery order issuance, with a need ship date of February 11, 2027, and an original required delivery date of February 23, 2027. Delivery is FOB origin to the designated receipt point at Tracy, California, with inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E using preservation method 31, unit container D3, and intermediate container D0, with palletization following DLA’s RP001 requirements. Marking shall adhere to MIL-STD-129 with no special marking required, and all shipments must include proper UCC/SCC-14 barcoding. The item is designated as a critical application with the manufacturer identified as Marotta Controls Inc, part number 235220-0003. The contract includes strict prohibitions on the use of ozone-depleting chemicals and the intentional addition of mercury or mercury-containing compounds, except for approved functional uses in batteries, fluorescent lights, sensors, or naval-specified instruments, with portable fluorescent lamps and instruments required to have shock-proof construction and a secondary containment boundary per NAVSEA 5100-003D. Hazardous materials must be labeled in accordance with 29 CFR 1910.1200, and hazard labels must be submitted for approval. All deliverables are subject to federal acquisition regulations, including compliance with clauses on combating human trafficking, employment eligibility verification, sustainable products, cybersecurity safeguarding (252.204-7012), and prohibition of covered defense telecommunications equipment. Payment must be submitted through WAWF, and the contractor must maintain a valid Unique Entity Identifier and CAGE code. Offerors must certify their small business status and compliance with socioeconomic categories and are prohibited from using mandatory arbitration agreements or including former DoD officials under compensation restrictions. No pricing information is provided in the solicitation, and contract type remains to be determined by the contracting officer.
FLUID HANDLING DIVISION

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332911
New
DIBBS
VALVE, RELIEF, PRESSU
Solicitation # SPE7MC-26-T-167G
The contract pertains to the procurement of one pressure and temperature relief valve, identified by part number PB43585-1A and NSN 4820013106885, manufactured by Curtiss-Wright Flow Control Corporation. A total of 13 units are required under Purchase Request 7017437346, with a unit price of $13.00, for a total contract value of $169. Delivery is FOB origin with a mandatory delivery window of 140 days, and inspection and acceptance occur at the destination. The item is designated a critical application item, requiring strict adherence to technical, quality, and packaging standards outlined in the DLA Master List of Technical and Quality Requirements. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, and the units must be palletized per DLA Packaging Requirements. No mercury or mercury-containing compounds may be intentionally added or come into direct contact with the valve except under strictly defined exceptions for functional uses in batteries, lighting, or specific instruments, and portable mercury-containing devices must include secondary containment per NAVSEA 5100-003D. The item must be marked with standard DLA codes and shipped to the DLA Distribution facility at New Cumberland, PA, with the required ship date by January 5, 2027. The contract is governed under solicitation SPE7MC-26-T-167G, issued by the Department of Defense via the DLA, with all technical and quality terms incorporated by reference from the official DLA repository.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
REPAIR KIT, VALVE
Solicitation # SPE7MC-26-T-166P
This contract covers the procurement of a repair kit for a valve, identified by NSN 4810017381935 and part numbers MNM90036003 and SA-E-402054, furnished in kit form under the solicitation SPE7MC-26-T-166P. The items are classified as critical application components and must comply with strict environmental and safety standards, including an outright prohibition on the use or incorporation of Class I ozone-depleting chemicals and the intentional addition of mercury or mercury-containing compounds, except for specific exempted uses such as in batteries, fluorescent lights, instrumentation, weapon systems, or authorized chemical reagents. All mercury-containing portable lamps and instruments must be shockproof and include a secondary containment barrier as per NAVSEA 5100-003D. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, and packaging must adhere to MIL-STD-2073-1E Appendix D for kits, with marking compliant with MIL-STD-129 and palletization per DLA packaging guidelines. The contract is awarded in two units: one for USS Asheville SSN 758 and another for USS Jefferson City SSN 759, each requiring delivery of one kit within 20 days FOB destination, with no tolerance for quantity variance. Preservation, packaging, and marking are fully specified, and all shipments must follow DLA procedures for transportation and addressing, with delivery dates set for August 4, 2026. The Defense Logistics Agency is the contracting authority, with Paula Mcclary as the primary point of contact.
Defense Logistics Agency

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
VALVE, BUTTERFLY
Solicitation # SPE7MC-26-T-167D
The contract pertains to the procurement of two butterfly valves with part number 24JG56431X and NSN 4820-01-728-8390, supplied by Crane Co Valve Division. The valves are designated as a critical application item and must comply with strict material restrictions, including a complete prohibition on the intentional addition of mercury or mercury-containing compounds, except for specific functional uses in batteries, fluorescent lights, required instruments, sensors or controls, weapon systems, and chemical analysis reagents approved by NAVSEA. Portable devices containing mercury must be shockproof and feature a secondary containment barrier, as mandated by NAVSEA 5100-003D. The valves are to be delivered FOB origin within 140 days, with no variance allowed in quantity, and are subject to inspection and acceptance at the destination. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 standards, with special marking code 00-00 indicating no additional requirements. Palletization follows DLA’s RP001 packaging requirements. Delivery is directed to the designated receiving warehouse in Tracy, California, with a need ship date of January 5, 2027, and an original required delivery date of February 28, 2027. The contract was issued under solicitation SPE7MC-26-T-167D by DLA Dist San Joaquin, a Department of Defense agency, with the point of contact being Paula Mcclary.
DLA DIST SAN JOAQUIN

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
BODY, VALVE
Solicitation # SPE7M1-26-T-249A
This contract specifies the procurement of two valve bodies identified by NSN 4820-01-416-7875 and part number J41548, supplied by approved vendors including INDUSTRIAL SERVICE AND SUPPLY, INC and PULSAFEEDER INC. Delivery is required within five days of award, with shipment FOB origin and no tolerance for quantity variance. The items must comply with DLA packaging standards per MIL-STD-2073-1E and marking requirements outlined in MIL-STD-129, with no special marking codes applied. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses in batteries, instruments, sensors, weapon systems, or chemical reagents approved by NAVSEA, and any portable mercury-containing devices must include shockproof construction and secondary containment in accordance with NAVSEA 5100-003D. The delivery destination is Fort Eustis, Virginia, with shipments required to be sent via the fastest traceable means excluding parcel post. The contract falls under DLA’s technical and quality requirements referenced from the DLA Master List, and the acquisition is subject to the version of that list in effect on the solicitation issue date. The purchase request number is 7017722221 with a total price of $2.00 per unit, and the required delivery date is August 4, 2026. The contracting office is under the Department of Defense’s Maritime Supply Chain, with contract data managed through the DIBBS system and point of contact listed as Misty Eckard.
MARITIME SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
PARTS KIT, BALL VALV
Solicitation # SPE7MC-26-T-167R
The contract is for a single unit of a Parts Kit, Ball Valve with NSN/Part Number 4820-01-696-0453, under solicitation SPE7MC-26-T-167R, issued by the Defense Logistics Agency on behalf of the Department of Defense. Delivery is required within 20 days of award, and responses must be submitted by August 17, 2026. Full and open competition applies, and the NAICS code 332911 identifies the industry category. The technical and quality requirements referenced in the solicitation are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on acquisition type. Packaging must comply with DLA’s procurement packaging standards, and all non-accepted supplies must have government identification removed prior to disposal or return. This item includes technical data subject to export control under either ITAR or EAR, and its dissemination to foreign persons—regardless of location—is strictly regulated. Only contractors approved by DLA with valid US/Canada Joint Certification Program credentials, completion of mandatory DOD export control training, and approval via the DLA questionnaire may access this data; DFARS 252.225-7048 governs compliance. The place of performance is Mechanicsville, Pennsylvania, with primary point of contact Paula McClary at fmda3302@dla.mil and phone number 6146920417. Additionally, the contracting organization is certified at CMMC Level 2 as a Third-Party Assessment Organization, ensuring cybersecurity standards are met throughout the acquisition process. All parties must adhere to these regulations without exception.
Defense Logistics Agency

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
DIAPHRAGM, VALVE, FLA
Solicitation # SPE7MC-26-T-166H
The contract pertains to the procurement of one diaphragm for a valve, identified by NSN 4820-01-291-5929 and part number NB33193472, supplied by Leslie Controls, Inc. The item must be delivered within 20 days FOB destination with no tolerance for quantity variance, and inspection and acceptance occur at the delivery point. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and unit containers, while marking follows MIL-STD-129 with no special marking required. Palletization adheres to DLA packaging standards, and shipment must utilize traceable freight methods—parcel post is prohibited. The delivery address is USS New York LPD 21, FPO AA 34092, with a required delivery date of July 30, 2026. Strict prohibitions ban intentional addition or direct contact of mercury or mercury-containing compounds with the supplied hardware, except for approved exceptions such as functional uses in batteries, sensors, or instruments specified by NAVSEA, with portable mercury-containing devices requiring shock-proof design and secondary containment per NAVSEA 5100-003D. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date or amendment date for large acquisitions. The solicitation number is SPE7MC-26-T-166H, issued by the Defense Logistics Agency under NAICS code 332911, with Paula Mcclary as the primary point of contact.
Defense Logistics Agency

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
VALVE, BALL
Solicitation # SPE7M0-26-T-028K
The contract specifies the procurement of a ball valve with a copper alloy body, identified by NSN 4820-01-290-4931 and part number 70-607-01, with a required quantity of six units. Delivery is due within five days of contract award, with shipment to be made FOB origin using the fastest traceable means, explicitly prohibiting parcel post. The valves must comply with DLA packaging requirements, MIL-STD-2073-1E for preparation, and MIL-V-3 for preservation and packaging, with preservation method ZZ requiring Level A preservation as specified in the commodity standard. Marking must adhere to MIL-STD-129, and no special marking is required. The item is designated as a critical application item, and mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for specific authorized applications such as batteries, fluorescent lights, sensors, or chemical reagents as defined by NAVSEA, with portable devices containing mercury requiring shock-proof construction and a secondary containment boundary per NAVSEA 5100-003D. Inspection and acceptance occur at the destination, with zero variance permitted in quantity. The contract references the DLA Master List of Technical and Quality Requirements for all R and I编号 specifications, with the applicable revision controlled by the solicitation or award date depending on acquisition size. The delivery address is the Portsmouth Naval Shipyard in Kittery, Maine, with the receiving officer located in Building 170. The required delivery date is August 3, 2026, and the contracting officer contact is Kathleen Hipes with the DLA.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
SEAT, VALVE
Solicitation # SPE7MC-26-T-148J
The contract is for the procurement of 12 stainless steel seat, valve units with NSN 4820012970262 and part number 189125-0030 from MAROTTA CONTROLS INC under solicitation SPE7MC-26-T-148J. Delivery is required within 168 days after receipt of order, with FOB origin terms, meaning title transfers at the contractor’s location, while physical delivery must reach the DLA Distribution facility at New Cumberland, Pennsylvania. Inspection and acceptance occur at the destination, and the Government retains full authority over both processes. The item must comply with stringent packaging standards per MIL-STD-2073-1E, including specific preservation methods, wrap materials, container types, and packaging codes, alongside marking requirements under MIL-STD-129 with no special marking needed. Palletization must follow DLA’s RP001 packaging requirements, and all items must be shipped via the designated address using mandatory electronic invoicing through Wide Area WorkFlow. The contract imposes strict prohibitions against the intentional incorporation of mercury or mercury-containing compounds into the product, with narrow exceptions for functional applications such as batteries, fluorescent lights, sensors, weapon systems, and NAVSEA-approved chemical reagents; portable mercury-containing devices must have shock-proof construction and a secondary containment barrier as per NAVSEA 5100-003D. Hazardous materials must be labeled per the Hazard Communication Standard, with SDS submissions required prior to award, and all labels must be pre-approved. Transportation by sea requires prior authorization for foreign-flag vessels, documentation of U.S.-flag efforts, and compliance with ocean shipping reporting requirements. The contractor must adhere to multiple FAR and DFARS clauses including 252.204-7012 for safeguarding defense information, 252.223-7008 prohibiting hexavalent chromium, 252.223-7006 restricting toxic materials, and 52.219-28 for small business representation, along with provisions on combating trafficking, employment eligibility, and cyber incident reporting. The contract includes flow-down obligations to subcontractors for key clauses and mandates UEI and CAGE code disclosures, but contains no evaluation factors, contract type specification, or final pricing data beyond a quantity of 12 units with a unit price of $12.00 as listed.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → WARNER ROBINS

Same awarding agency

NAICS: 332911
New
DIBBS
VALVE, CHECK
Solicitation # SPE7MC-26-T-167A
This contract specifies the procurement of a check valve designated as a hydraulic fuse, constructed from aluminum alloy, with an operating pressure rating of 3000 psi and a maximum temperature range from minus 65 to plus 275 degrees Fahrenheit. The valve must conform to military specifications MS33514-6 through MS33514-8 and is classified as a critical application item for pneudraulics systems. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by identifiers such as RQ011, RP001, and others incorporated by reference, which supersede any other standards including ASTM D3951. The item, identified by NSN 4820004889386 and part number 9360 from PNEUDRAULICS, INC., is to be delivered in accordance with MIL-STD-129 packaging and labeling standards, with palletization strictly following DLA packaging requirements. Five units are required, each at a unit price of $5.00, with no variance allowed in quantity. Delivery is FOB origin with inspection and acceptance occurring at the destination. The shipment must be sent to DLA Distribution Warner Robins in Georgia by January 1, 2028, with an original required delivery date of May 5, 2028. The solicitation, issued under SPE7MC-26-T-167A, is a total small business set-aside under NAICS code 332911, with contracting points of contact and procedural details outlined in associated DLA documentation.
Industrial Valve Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 484220
New
DIBBS
Domestic Logistics and FOB Origin ShippingThe contract requires coordination of domestic freight transport for check valves from the manufacturer to the designated DLA delivery point at Robins AFB, Georgia, under FOB Origin terms, meaning the responsibility and risk transfer to the buyer once the goods leave the manufacturer’s location. The logistics provider must adhere to a strict 183-day ADO schedule, ensuring timely and compliant delivery of the goods without delay. The shipment is classified under NAICS code 484220, indicating it falls under truck transportation of freight, and is structured as a subcontract within the Department of Defense, managed by the Warner Robins office. Proposals are due by August 6, 2026, with the solicitation posted on August 3, 2026, and all performance obligations are tied to the specific delivery endpoint at the specified ZIP code, with no additional settlement or origin details provided beyond the FOB condition.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 541380
New
DIBBS
Quality Inspection and Conformance TestingThe contract requires the performance of quality inspections and conformance testing in strict adherence to MIL-STD-1916 and ASQ H1331 standards, utilizing AQL-based sampling methods with defined acceptance levels: Critical defects at 0.1, Major defects at 1.0, and Minor defects at 4.0. All inspections must be thoroughly documented to ensure full compliance and acceptance by the Defense Logistics Agency. The work is to be performed at Robins Air Force Base, Georgia, with a zip code of 31098-1887, and is classified as a subcontract under NAICS code 541380. The solicitation was posted on August 3, 2026, with a response deadline of August 6, 2026, and is managed by the Department of Defense, specifically the Warner Robins office.
Testing Laboratories and Services

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 561910
New
DIBBS
Specialized Packaging and Palletization ServicesThe contract requires specialized packaging, labeling, and palletization of check valves in full compliance with military standards DLA RP001 and MIL-STD-129, ensuring all items meet rigorous defense logistics requirements. This includes accurate hazard communication labeling, precise pallet configuration, and preparation for FOB Origin shipment, meaning the contractor is responsible for packaging and labeling but not for transportation logistics beyond the point of origin. All work must be performed at Robins Air Force Base, Georgia, with the end goal of delivering items ready for immediate military use and distribution. The solicitation is classified as a subcontract under NAICS code 561910, indicating it falls under Other Support Activities, and is managed by the Department of Defense through the Warner Robins office. The opportunity was posted on August 3, 2026, with a strict submission deadline of August 6, 2026, leaving minimal time for response. The contract is not subject to any specific set-aside categorization and must be executed in strict alignment with federal defense packaging protocols to ensure compatibility with military supply chain systems.
Packaging and Labeling Services

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 332911
New
DIBBS
Check Valve Manufacturing and SupplyThe contract requires the manufacture and supply of thirteen check valves that meet strict military specifications including NSN 4820-01-346-4650 and MIL-V-19069B, with full compliance to the DLA Qualified Products List. All units must be produced to exacting defense standards ensuring reliability and performance under operational conditions. The work is classified as a subcontract under NAICS code 332911 and is being managed by the Department of Defense through the Warner Robins organization, with performance required at Robins AFB, Georgia, 31098-1887. The solicitation was posted on August 3, 2026, and responses are due by August 6, 2026, with no set-aside provisions indicated. All bids must be submitted through the DIBBS platform using the provided RFQ link.
Industrial Valve Manufacturing

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 541330
New
DIBBS
Quality and Technical Compliance SupportThe contract seeks technical documentation, inspection reports, and compliance verification services to ensure valves adhere to stringent standards set by the Defense Logistics Agency, Naval Sea Systems Command, and the Defense Federal Acquisition Regulation Supplement. The work is focused on sustaining defense-grade quality and regulatory adherence, with deliverables critical to validating that components meet all contractual, operational, and safety requirements for military use. Precision in documentation and rigorous verification processes are essential to satisfy federal procurement and supply chain integrity mandates. Performance is required at Robins Air Force Base, Georgia, with the submission deadline set for August 14, 2026. The solicitation is structured as a subcontract under NAICS code 541330, indicating professional, scientific, and technical services related to engineering. The contracting entity falls under the Department of Defense, specifically the Warner Robins organization, and all work must align with defense-specific compliance frameworks. The contract does not specify a set-aside designation, and participation is open to qualified vendors capable of delivering verified technical outputs that support mission-critical valve systems for defense applications.
Engineering Services

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 484220
New
DIBBS
Domestic Freight and Delivery to Warner Robins AFBThe contract entails the domestic transportation of packaged valves to DLA Distribution at Warner Robins Air Force Base in Georgia, with all associated logistics including proper documentation, real-time tracking, and verification of delivery. The work falls under NAICS code 484220, indicating it is a freight transportation contract focused on trucking services for general freight. The solicitation is categorized as a subcontract and is open for responses until August 14, 2026, with the opportunity posted on August 3, 2026. The place of performance is specifically designated as Robins AFB with the zip code 31098-1887, and the contracting agency is the Department of Defense through its Warner Robins office. All shipments must meet strict delivery requirements to ensure accountability and compliance with military supply chain protocols.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 493190
New
DIBBS
Military-Compliant Packaging and Marking ServicesThe contract requires the provision of military-compliant packaging, unitization, and marking services for valves in full adherence to MIL-STD-2073-1E, MIL-STD-129, and DLA RP001 standards, ensuring all items meet rigorous Department of Defense specifications for handling, storage, and transportation. Compliance with these standards mandates precise labeling, secure containment, and proper documentation to maintain supply chain integrity and operational readiness throughout the lifecycle of the valued components. Performance is targeted at Robins Air Force Base, Georgia, with a deadline for responses set for August 14, 2026, and the solicitation issued under the NAICS code 493190, indicating a focus on warehousing and storage services. This subcontract opportunity is open to qualified vendors capable of delivering end-to-end packaging solutions that align with federal defense logistics requirements, without any set-aside provisions specified. All work must be executed to guarantee seamless integration into military logistics infrastructure, with strict accountability for traceability and compliance at every stage.
Other Warehousing and Storage

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 332911
New
DIBBS
Precision Machined Check Valve ManufacturingThe contract requires the manufacture of ten military-specification check valves with NSN 4820001322002, encompassing full lifecycle production from material sourcing and precision machining to rigorous testing and quality assurance. All work must adhere strictly to MIL-STD standards and Defense Logistics Agency requirements to ensure compliance with defense-grade performance and reliability benchmarks. The valves are to be produced for delivery to Robins Air Force Base, Georgia, with all manufacturing, inspection, and testing activities conducted in accordance with federal defense procurement protocols. The solicitation is classified as a subcontract under NAICS code 332911, with a response deadline of August 14, 2026, and was posted on August 3, 2026. The contracting entity is the Department of Defense, specifically under the Warner Robins office, indicating the work serves a critical military systems need. There is no set-aside designation, meaning eligibility is not restricted to small businesses or specific categories. The place of performance is fixed at Robins AFB, and all delivered components must meet exacting inspection and documentation standards prior to acceptance.
Industrial Valve Manufacturing

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 332911
New
DIBBS
PARTS KIT, VALVE
Solicitation # SPE7MC-26-T-148R
The contract is for a Parts Kit, Valve, specifically an inflation valve for E/I multiplace life rafts, with the NSN 4820-00-999-7662 and a quantity of 219 units. The delivery must be completed within 16 days after order placement, with FOB Origin terms applying, meaning the contractor is responsible for delivery to the designated destination at Robins Air Force Base, Georgia, with all transportation costs included in the unit price. The item is classified as a critical application item, and suppliers must be identified as Inflation Systems, Inc. with P/N 706058 or Jefferson Metal Stampings Inc DBA OZGE6 with P/N ASV-711. Packaging must strictly comply with ASTM D3951 unless superseded by higher-priority DLA Master List of Technical and Quality Requirements, which take precedence and must be followed in their most current revision as of the solicitation issue date. All packaging and labeling must conform to MIL-STD-129, including proper barcoding, and palletization must adhere to RP001: DLA Packaging Requirements for Procurement. The product must be delivered to the specified government warehouse address and inspected and accepted at the destination point by the government. The contract incorporates multiple Federal Acquisition Regulation clauses related to cybersecurity, hazardous materials, employment verification, and trafficking in persons, all with deviations noted under 2026-00038 and other deviation codes. Specifically, the contractor must comply with NIST SP 800-171, safeguarding covered defense information, and provide Safety Data Sheets in accordance with 29 CFR 1910.1200 and Federal Standard No. 313 for any hazardous materials, with updates required if compositions or standards change. Offerors must hold a valid Unique Entity Identifier and CAGE code and disclose socioeconomic status such as small business, WOSB, SDVOSB, or HUBZone status, with joint ventures requiring full partner disclosure. Invoicing is exclusively through Wide Area WorkFlow (WAWF), and payment is contingent on electronic submission of receiving reports and invoices. The solicitation was issued under the DIBBS portal with a response deadline of August 6, 2026, and the acquisition is governed by NAICS code 332911. There is no specified contract value listed in the pricing section, and
Industrial Valve Manufacturing

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 335312
New
DIBBS
POWER SUPPLY
Solicitation # SPE7L7-26-T-4413
The contract is for the procurement of three power supply units, part number W14D10, manufactured by Martek Power Abbott Inc with CAGE code 15755, under solicitation SPE7L7-26-T-4413, issued as a Total Small Business Set-Aside under NAICS code 335312. Delivery is required to Robins Air Force Base, Georgia, within 168 days after award, with FOB Origin terms applying, and no tolerance is permitted for quantity variance. Inspection and acceptance are conducted at the destination point, governed by zero-nonconformance sampling criteria under MIL-STD-1916 or ASQ H1331 Table 1, with all unspecified attributes treated as major. The power supply must comply with the DLA Master List of Technical and Quality Requirements, which supersede ASTM D3951 packaging standards, and all packaging and labeling must adhere to MIL-STD-129, including barcoding per GS1-128, with palletization following RP001 DLA Packaging Requirements. The vendor must maintain CMMC Level 2 certification and safeguard covered defense information per DFARS 252.204-7012, while also complying with NIST SP 800-171 assessment requirements, and is subject to prohibitions on the use of covered defense telecommunications equipment, hexavalent chromium, hazardous materials, and Communist Chinese military company items. Payment must be submitted electronically via Wide Area WorkFlow, and the contract includes clauses mandating whistleblower protections, cyber incident reporting, limitation on arbitration agreements, and accelerated payments to small business subcontractors. No pricing information is provided in the contract, and the award basis is inferred to be Lowest Price Technically Acceptable, though not explicitly stated. The contract does not include options, key personnel requirements, or specified security clearances, but requires full compliance with all referenced standards, including the Hazard Communication Standard for labeling, and submission of representations and certifications through DIBBS by the stated deadline.
Motor and Generator Manufacturing

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 332911
New
DIBBS
VALVE, CHECK
Solicitation # SPE7MC-26-T-165Q
The contract solicits ten check valves for use in an air conditioning unit bypass system with the NSN 4820-00-132-2002, under solicitation number SPE7MC-26-T-165Q, issued by the Defense Logistics Agency through the Warner Robins office of the Department of Defense. Delivery is required within 157 days after award, with responses due by August 14, 2026, and the solicitation posted on August 3, 2026. The North American Industry Classification System code is 332911, identifying the procurement as related to other fabricated metal product manufacturing. The contract incorporates technical and quality requirements referenced by R and I numbers from the DLA Master List of Technical and Quality Requirements, with applicability determined by the revision in effect on the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. The vendor must comply with DLA packaging standards, enforce removal of government identification from non-accepted supplies, and adhere to strict export control protocols under ITAR or EAR, as the technical data associated with this item cannot be disclosed to foreign persons without prior authorization from the Department of State or Department of Commerce. Access to export-controlled technical data is restricted to contractors with approved US/Canada Joint Certification Program certification, completion of required DOD export control training, and DLA approval. The contract mandates compliance with Cybersecurity Maturity Model Certification Level 2, requiring the vendor to be a certified third-party assessment organization capable of handling covered defense information as defined by applicable regulations. DFARS 252.225-7048 governs the handling and safeguarding of export-controlled technical data, and distribution is limited to entities that have fulfilled all DLA administrative and training prerequisites. The place of performance is Robins Air Force Base, Georgia, with primary point of contact Paula McClary, reachable via email and phone provided. All provisions align with DLA’s broader acquisition policies, emphasizing security, compliance, and technical accountability across the supply chain.
Industrial Valve Manufacturing

POSTED

1 day ago

DEADLINE

in 10 days
View Details