This Subcontract opportunity from Department Of Defense was posted on October 14, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Valve Disk Fabrication and Manufacturing

Closed

Federal

Submission Closed10/26/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332721

New

Pin Assemblies

Solicitation # pin-assemblies

Mercer Engineering Research Center is soliciting bids from qualified suppliers for the fabrication of precision ground pin assemblies. The required components feature diameters ranging from 0.155 to 3 inches and lengths between 3 and 10 inches. This opportunity is open to performance across all U.S. states and is specifically set aside for small businesses, including certified veteran-owned, service-disabled veteran-owned, women-owned, and HUBZone small businesses. Interested parties should reference solicitation number pin-assemblies and coordinate with the primary point of contact, Michael Lange, for further technical details. The response deadline is set for November 13, 2026, and the procurement falls under NAICS code 332721.

Mercer Engineering Research Center

POSTED

DEADLINE

Precision Shaft Supply (Part # 1680-LL-F02-I711 P8)This subcontract involves the supply of one specialized shaft, part number 1680-LL-F02-I711 P8, for prime contractors supporting the Department of Defense agency Navsup Weapon Systems Support. The contractor is responsible for delivering a finished product that is marked with unique item identifiers using two-dimensional data matrix symbology and packaged in strict accordance with MIL-STD-2073 standards. The agreement requires full compliance with Trade Agreements, ensuring that end products originate from the United States or other qualifying countries. This procurement falls under NAICS code 332721, with a response deadline set for December 11, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Precision Manufacturing of Nut Assembly, Retainer RingThis subcontract involves the precision manufacturing and assembly of five Nut Assembly Retainer Rings for the DLA Weapons Support ASC Commodities Division. The contractor is responsible for fabricating components in strict accordance with Basic Drawing 18876 11450124 (Rev D) and Reference Drawing 18876 11450102 (Rev D), while ensuring all bare item marking adheres to RQ017 standards. Due to the nature of the project and the requirement for ITAR and EAR data access, the selected provider must hold CMMC Level 2 certification and be part of the US/Canada Joint Certification Program. The solicitation was posted on November 11, 2026, with a response deadline of November 19, 2026, falling under NAICS code 332721.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Precision Headless Pin FabricationThis subcontract involves the precision fabrication of 82 straight, headless pins for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The manufacturing process must strictly adhere to TDP Rev A Gen 1, reference drawing 13873 EI-011910171, and SAE AS20253 Revision B standards. The use of precision machining equipment is mandatory, while additive manufacturing is explicitly prohibited to ensure component integrity. The project requires strict adherence to cybersecurity and data protection regulations, specifically DFARS 252.204-7012 and NIST SP 800-171. Performance will take place in Tracy, California, under NAICS code 332721. Interested parties must have submitted responses by the deadline of November 19, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Rigid Connecting Link Manufacturing (Casting & Machining)This subcontract involves the metal casting and precision machining of 36 Rigid Connecting Links for the DLA Weapons Support Land Supply Chain. The project requires strict adherence to TDP Rev D Gen 4 and Basic Drawing NR 19207 12334415, utilizing custom casting tooling. Quality assurance must be maintained through sampling standards compliant with MIL-STD-1916 or ASQ H1331. To be eligible for this performance in New Cumberland, contractors must hold CMMC Level 2 and JCP Certification. The work falls under NAICS code 332721 and is managed under the Department of Defense. Responses for this requirement are due by November 23, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Honeywell Cotter Pins (NSN 5315-01-005-3745)This subcontract involves the supply of 140 Honeywell Aerospace US LLC cotter pins, part number 953522-23, for prime contractors supporting DLA Weapons Support ASC projects. The procurement must adhere to the DLA Master List of Technical and Quality Requirements, with sampling and inspection conducted according to MIL-STD-1916 or ASQ H1331. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 standards. The contractor is required to maintain ISO-compliant inspection systems and strictly follow the Buy American program. All 140 units are to be delivered FOB Origin to Jacksonville. This requirement is managed by the Department of Defense under NAICS code 332721.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Manufacture and Supply of Plain Plate Nuts (NSN 5310-01-632-4492)This subcontract involves the manufacture and supply of 30 plain plate nuts, specifically Boeing part number HS5771G3CR, for the DLA Weapons Support ASC. The contractor is required to use precision machining to meet strict aerospace tolerances and must adhere to ISO 9001:2015 certification and Buy American standards. Quality control will be managed through sampling per MIL-STD-1916 or ASQ H1331, with packaging requirements following ASTM D3951 and MIL-STD-129. The final 30 units are to be delivered to DLA Distribution DDSP New Cumberland.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Manufacturer of Straight Headless Pins (NSN 5315-01-479-0776)This subcontract involves the manufacture and supply of 24 precision-machined straight, headless pins for prime contractors supporting the Department of Defense DLA Weapons Support ASC Commodities Division. The pins must be fabricated to the specific dimensions and tolerances of NSN 5315-01-479-0776 utilizing CNC lathes and grinders. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332721. The contractor must ensure strict adherence to the DLA Master List of Technical and Quality Requirements and follow quality sampling standards per MIL-STD-1916 or ASQ H1331. Additionally, all deliverables must be compliant with the Buy American Act. The solicitation was posted on November 11, 2026, with a response deadline of November 19, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Pipe-to-Tube ElbowsThis subcontract, issued by the DLA Weapons Support Maritime Supply Chain under the Department of Defense, requires the provision of 1,081 specialized pipe-to-tube elbows matching NSN 4730010864064. The contractor is responsible for manufacturing or sourcing these components, with the potential use of additive manufacturing. All units must be marked according to MIL-STD-129 and palletized in compliance with RP001 DLA Packaging Requirements, and Safety Data Sheets must be provided per Federal Standard No. 313. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332721. Interested parties must respond by November 27, 2026. The contract focuses on supporting prime contractors to ensure the delivery of critical hardware to the Defense Logistics Agency.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Hexagon Head Cap Screw / Machine Bolt ManufacturingThis subcontract involves the manufacture of 497 units of hexagon head cap screws and machine bolts, specifically NSN 5305-01-161-2567, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The production must adhere to strict technical specifications, including Class 3A and 3B threads per System 22 of FED-STD-H28/20 and a zero-non-conformance standard under MIL-STD-105/ASQ Z1. The project requires the use of precision machining equipment and materials that comply with the Buy American Act and the Berry Amendment. Performance will take place in Tracy, California, under NAICS code 332721. The solicitation was posted on November 11, 2026, with a response deadline of November 19, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Close Tolerance Screw Manufacturing and SupplyThis subcontract involves the manufacturing and supply of 5,034 high-precision, close-tolerance screws designated as Critical Application Items for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The project requires the use of precision machining equipment to ensure all units meet strict critical application requirements. Quality assurance is a primary focus, with mandatory implementation of quality control sampling plans adhering to MIL-STD-1916, ASQ H1331 Table 1, or equivalent zero-based sampling standards. The work is to be performed in New Cumberland, Pennsylvania, under NAICS code 332721.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Precision Machining and Fabrication of Tensioning Tie RodsThis subcontract involves the precision machining and fabrication of 37 threaded end tensioning tie rods for the DLA Weapons Support ASC Commodities Division. The work requires the use of CNC lathes to manufacture the components according to drawing 98750 55C22150 Rev G. Performance will take place in New Cumberland, Pennsylvania, with a final delivery requirement of 37 finished and inspected units. Strict compliance with quality and regulatory standards is mandatory, including the implementation of quality systems per SAE AS9003 or ISO 9001 and zero-based sampling according to MIL-STD-1916. Additionally, the contractor must hold US/Canada Joint Certification Program credentials and maintain ITAR/EAR authorization. The solicitation was posted on November 11, 2026, with a response deadline of November 19, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

in 7 days

AI Contract Overview

This subcontract for the Defense Logistics Agency involves the fabrication and manufacturing of valve disks for prime contractors. The scope of work includes precision machining, casting, or fabrication of metal components in accordance with NSN 012328453 and the DLA Master List of Technical and Quality Requirements. Production must utilize CNC machining or additive manufacturing and employ materials that are compliant with the Buy American Act. The contractor is required to maintain NIST SP 800-171 cybersecurity compliance to ensure the security of sensitive information. All finished valve disks must meet strict technical specifications for delivery. This opportunity falls under NAICS code 332721, with a response deadline of October 26, 2026, and performance located at FPO 09577.

General Info

DLA subcontract for manufacturing valve disks via CNC or additive manufacturing by October 2026.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

332721 - Precision Turned Product Manufacturing

Place of Performance

FPO, AE, 09577, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7MC-27-T-0729.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

DISK, VALVE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedOct 14

subcontract

Response DeadlineOct 26

Deadline has passed

Submission Closed

10/26/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Manufactures valve disks for prime contractors on DLA supply contracts. Performs precision machining, casting, or fabrication of metal components per NSN 012328453 and the DLA Master List of Technical and Quality Requirements (RA001). Utilizes CNC machining or additive manufacturing and Buy American Act compliant materials. Requires NIST SP 800-171 cybersecurity compliance. Delivers finished valve disks meeting all technical specifications.