Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

VALVE, FLUSH

Active
SPE8E8-26-T-5013Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 64 units of a FLUSH VALVE identified by NSN 4510-01-579-3370 under Purchase Request 7017757363, with a delivery requirement of 89 days ADO. The solicitation number is SPE8E8-26-T-5013, issued on August 5, 2026, with responses due by August 17, 2026, and is designated as a Women-Owned Small Business Set-Aside under NAICS code 332913. Technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, accessible via the DLA website, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The contract mandates compliance with DLA packaging requirements and includes provisions for the removal of government identification from non-accepted supplies. The performing location is in San Diego, California, with the Department of Defense as the overseeing agency and Alexis Selby as the primary point of contact, reachable via email and phone, with all communications and submissions to be conducted through the DIBBS portal.

General Info

64 flush valves procured under Women-Owned Small Business Set-Aside, delivery in 89 days, DIBBS portal only.

Agency

Department Of Defense → SAN DIEGOView Agency

NAICS

332913 - Plumbing Fixture Fitting and Trim ManufacturingView NAICS

Place of Performance

3581 CUMMINGS ROAD BLDG 3581, SAN DIEGO, CA, 92136-3581, US

Set-Aside

WOSB

Documents

(1)

RFQ SPE8E8-26-T-5013 Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → SAN DIEGO
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → SAN DIEGO
View Agency Profile
Office AddressUS
Contacts
Alexis Selby
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
VALVE,FLUSH
VALVE,FLUSH
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
ADEQUATE DATA FOR NSN/Part Number: 4510-01-579-3370 Quantity: 64 EA Purchase Request: 7017757363QTY: 64 Delivery: 89 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332913
New
DIBBS
URINAL, STATIONARY
Solicitation # SPE8E9-26-T-3310
The contract is for 78 stationary urinals with part numbers 5672 and U5672, manufactured by Anchor Fabricators Inc. in Clayton, OH, and is identified by NSN 4510-00-691-3979. The items must be color white and comply with all applicable technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, which are incorporated by full text. Packaging must meet DLA packaging specifications, and any non-accepted supplies must have government identification removed before return. The solicitation number is SPE8E9-26-T-3310, issued under a Women-Owned Small Business Set-Aside, with a NAICS code of 332913. The request was made under purchase request 7017757728, and delivery is required within 187 days after order. The place of performance is Tinker Air Force Base, Oklahoma, with a response deadline of August 17, 2026, and the solicitation was posted on August 5, 2026. Primary point of contact is Matthew Kruc of the Department of Defense, Construction & Equipment MRO SVC I.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332913
New
DIBBS
FAUCET, SINGLE
Solicitation # SPE8E9-26-T-3328
The contract is for the procurement of seven single faucets under the NSN 4510-01-187-2555, with the model designated as DRINKAMATIC by MILE HIGH EQUIPMENT CO of Denver, CO. Delivery is required within 167 days after award, and the solicitation number is SPE8E9-26-T-3328, with a response deadline of August 17, 2026. The procurement falls under NAICS code 332913 and is managed by the Department of Defense’s Construction & Equipment MRO Service I. All supplies must comply with DLA packaging requirements and incorporate technical and quality specifications listed in the DLA Master List of Technical and Quality Requirements, where revisions in effect on the solicitation issue or award date govern depending on acquisition size. Mercury or mercury-containing compounds are strictly prohibited in the product or its direct contact surfaces, except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or NAVSEA-specified chemical reagents. Portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment barrier, as mandated by NAVSEA 5100-003D. Government identification must be removed from non-accepted supplies, and the place of performance is Tracy, CA, with Matthew Kruc listed as the primary point of contact.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332913
New
DIBBS
STRAINER, WASTE DRAIN
Solicitation # SPE8E8-26-T-4976
The contract pertains to the procurement of 90 units of a strainer, waste drain identified by NSN 4510-01-313-9460, with a delivery requirement of 167 days after order. The solicitation number is SPE8E8-26-T-4976, issued by the DLA San Joaquin under the Department of Defense, and responses are due by August 17, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment introduces a later revision. All supplies must comply with DLA packaging requirements and regulatory standards as defined in RP001 and RA001, and any non-accepted items must have government identification removed prior to return. The place of performance is Tracy, California, with Alexis Selby listed as the primary point of contact for inquiries. The NAICS code 332913 indicates the classification under Other Fabricated Metal Product Manufacturing, and the solicitation is open to federal contractors with no specified set-aside classification.
DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332913
New
DIBBS
VALVE, FLUSH
Solicitation # SPE8E8-26-T-5022
This contract specifies the procurement of 75 units of a DOLPHIN MODEL TYPE I, CLASS A, SHOCK-PROOF FLUSHOMETER for shipboard use in salt water and severe water conditions, identified by NSN 4510-01-576-0096. The item must comply with stringent environmental and safety standards, including the prohibition of intentional addition or direct contact with mercury or mercury-containing compounds, except for specific functional uses such as in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents authorized by NAVSEA. Portable devices containing mercury must be shock-proof and feature a secondary containment boundary as mandated by NAVSEA 5100-003D. The solicitation is issued under SPE8E8-26-T-5022 as a Total Small Business Set-Aside, with a response deadline of August 17, 2026, and a required delivery within 36 days after award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on the acquisition size. The contract is managed by the Department of Defense through the San Diego office, with Alexis Selby listed as the primary point of contact.
SAN DIEGO

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332913
New
DIBBS
DRAIN, FLOOR
Solicitation # SPE8E8-26-T-5067
The contract is for a single unit of a Type B deck drain with a steel ring, manufactured from copper nickel alloy, identified by NSN 4510-01-528-3652 and associated with purchase request 7017744439. Delivery is required within 20 days after delivery order issue. The specification references DLA Packaging Requirements for Procurement and incorporates technical and quality standards from the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, with compliance governed by the version in effect on the solicitation issue date for simplified acquisitions. All government identification must be removed from non-accepted supplies as per RQ011. The solicitation number is SPE8E8-26-T-5067, issued by the Defense Logistics Agency under the Department of Defense, with a posted date of August 5, 2026, and a response deadline of August 17, 2026. The NAICS code is 332913, and performance is to occur at FPO with ZIP 96666. Primary point of contact is Alexis Selby, reachable via email and phone provided.
Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332913
New
DIBBS
STEM, FAUCET
Solicitation # SPE8E8-26-T-5026
This contract, issued by the Defense Logistics Agency under solicitation number SPE8E8-26-T-5026, specifies the procurement of 24 units of a STEM FAUCET with NSN 4510-01-477-9325 at a unit price of $24.00, for a total contract value of $576.00. Delivery is required FOB origin within 167 days of contract award, with the original delivery deadline set for November 29, 2026, and a need ship date of February 1, 2027. The item must be packaged in accordance with MIL-STD-2073-1E, marked per MIL-STD-129 with no special marking requirements, and shipped to the designated receiving warehouse at Tracy, California. Inspection and acceptance occur at the destination. The contract prohibits the intentional addition of mercury or mercury-containing compounds to the supplied hardware, with specific exemptions for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and NAVSEA-specified reagents. Mercury-containing portable lamps and instruments must include a second boundary of containment as defined by NAVSEA 5100-003D. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation or award date depending on acquisition size. The unit of issue is EA and all transportation logistics must comply with DLA procedural notes C19 and C20.
DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332913
New
DIBBS
GARBAGE DISPOSAL MA
Solicitation # SPE8E8-26-T-5066
This contract pertains to the procurement of three units of garbage disposal equipment under NSN 4540-01-685-9857, identified by part number FD4/125-E-6(480/60/3) and purchase request 7017757109. The delivery is scheduled to occur within 167 days from the contract award, with FOB origin terms applying and no tolerance for quantity variance. Inspection and acceptance both occur at the destination, and packaging must strictly conform to MIL-STD-2073-1E, including specific preservation methods, wrapping, and unit container requirements. Marking must adhere to MIL-STD-129 with no special marking code applied. Palletization follows DLA Packaging Requirements, and all shipments must be addressed to the DDSP New Cumberland Facility in New Cumberland, Pennsylvania. The required ship date is February 1, 2027, with the original delivery deadline set for March 20, 2027. The solicitation, issued under contract number SPE8E8-26-T-5066, was posted on August 5, 2026, with a response deadline of August 17, 2026. It falls under NAICS code 332913 and is managed by the Department of Defense through the DDSP New Cumberland Facility. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date. The contract incorporates protections for covered defense information and directs adherence to DLA transport guidelines. The unit of issue is each, with a unit price of $3.00, resulting in a total contract value of $9.00. Primary point of contact is Alexis Selby, reachable via email and phone provided, and further details are available through the DIBBS portal.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332913
New
DIBBS
BAFFLE, DECK DRAIN
Solicitation # SPE8E8-26-T-4992
The item specified is a BAFFLE, DECK DRAIN with NSN 4510-01-369-5880, for a quantity of 18 units, under Purchase Request 7017757481, with delivery required in 167 days after award. The solicitation number is SPE8E8-26-T-4992, posted on August 5, 2026, with responses due by August 17, 2026. Performance is directed to Tracy, California, 95304-5000, under the jurisdiction of DLA Dist San Joaquin, a Department of Defense entity. The NAICS code 332913 identifies the industrial category, and the acquisition is classified as federal. The contract incorporates DLA packaging requirements and references the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by solicitation or award date, depending on acquisition size. Cybersecurity requirements mandate CMMC Level 2 certification by a C3PAO and compliance with Covered Defense Information standards. Technical data associated with this item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons, even within the U.S., and requires prior authorization from the Department of State or Commerce. Access to controlled data is limited to contractors with approved JCP certification, completion of mandatory DOD export control training, and formal DLA approval. Point of contact for inquiries is Alexis Selby, reachable via email and phone provided.
DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332913
New
DIBBS
DRAIN, FLOOR
Solicitation # SPE8E8-26-T-5043
The contract is for the procurement of three floor drains identified by NSN 4510-01-519-7819, with a delivery requirement of 167 days after award. The solicitation number is SPE8E8-26-T-5043, issued on August 5, 2026, with responses due by August 17, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and the applicable revision depends on whether the acquisition is simplified or large, with the version in effect on the solicitation or award date controlling unless an amendment supersedes it. Government identification must be removed from any non-accepted supplies prior to return. The contracting activity is the DDSP New Cumberland Facility under the Department of Defense, with performance located at New Cumberland, Pennsylvania, zip 17070-5002. The NAICS code is 332913, and the primary point of contact is Alexis Selby, reachable at 312-444-8487 or alexis.selby@dla.mil. The solicitation is publicly accessible through the DIBBS portal.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332913
New
Federal
HOUSING CONTROL
Solicitation # SPRMM126QKG90
This contract pertains to the procurement of a HOUSING CONTROL item under solicitation SPRMM126QKG90, issued by DLA Mechanicsburg on behalf of the Department of Defense. The requirement mandates manufacturing in strict compliance with MIL-STD-1686 and MIL-STD-130 Revision N for marking, with no substitutions allowed without prior written approval from the NAVICP-MECH Contracting Officer. Changes to design, material, or part number must be classified under one of six specific codes and accompanied by detailed documentation. The item must be mercury-free, with any exception requiring explicit contractual authorization and protective labeling, and adherence to ANSI/ESD S20.20 for electrostatic discharge control is mandatory. Refurbished materials are explicitly prohibited, and only original equipment manufacturers or authorized distributors may respond, with proof of authorization required. All deliveries are subject to inspection at source, with final acceptance occurring at the designated facility, and contractors must comply with strict quality assurance protocols including maintaining inspection records for 365 days after final delivery. Packaging must conform to MIL-STD-2073, and all submissions require electronic transmittal via PIEE-WAWF. The contract is awarded using the Lowest Price Technically Acceptable (LPTA) methodology, with offers valid for a limited period and responses due by August 7, 2026. Proposals must include the OEM’s CAGE code and part number if the offeror is not the manufacturer, and all communications must be directed to the designated point of contact. Contractors must register for Electronic Data Access on the PIEE portal to monitor order status and comply with cybersecurity requirements mandating CMMC Level 1 self-assessment. The use of restricted technical data is governed by specific distribution statements, and access to “NOFORN” or “Official Use Only” documents requires formal certification. Any changes to the production facility must not impact small business commitments, delivery timelines, or F.O.B. points, and require a $250 administrative fee. Compliance with all applicable clauses—including payment via WAWF, traceability of parts, and prohibitions on mercury contamination—is mandatory and non-negotiable, with noncompliance leading to rejection of delivery or contract cancellation.
SPRMM1 DLA Mechanicsburg

POSTED

about 8 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332913
New
DIBBS
Military Shipment Marking & Barcoding Services
DLA DIST SAN JOAQUIN

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 332913
New
DIBBS
Floor Drain Supply – Industrial GradeThe contract involves the supply of one industrial floor drain with the national stock number 4510015197819, engineered to exacting military standards for durability and corrosion resistance. The component must be manufactured with precision and treated with a protective coating capable of withstanding harsh operational environments, ensuring long-term performance under demanding conditions typical of defense applications. The work is classified under NAICS code 332913, indicating specialized fabrication and manufacturing practices are required to meet the technical specifications. This is a subcontract opportunity issued by the Defense Logistics Agency under the Department of Defense, with a response deadline of August 17, 2026. The place of performance is designated as Virginia Beach, Virginia, with a zip code of 23459-9309, indicating the delivered product must be shipped to or installed at this location. The solicitation is open to qualified subcontractors and is accessible via the DIBBS system, though no specific set-aside status or point of contact is provided in the data. All proposals must demonstrate compliance with military-grade requirements for material integrity, coating adherence, and dimensional accuracy.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → SAN DIEGO

Same awarding agency

NAICS: 331110
New
DIBBS
SHEET, METAL
Solicitation # SPE8E4-26-T-1957
This contract specifies the procurement of aluminum alloy high magnesium sheet metal with precise dimensions of 0.190 inches thick, 72.00 inches wide, and 240.00 inches long, weighing approximately 315.600 pounds per sheet. The material must conform to the qualified suppliers list for distributors (QSLD) as defined by DLA Troop Support, and only suppliers listed on the QSLD are eligible for award; any deviation must be explicitly stated by the offeror. Non-compliance may result in criminal penalties. The product must adhere to technical standards including ASTM B928/B928M-15, MIL-STD-129R, ASTM B666/B666M-20, and ASTM B660-23, with full metallurgical certification required for every shipment and a copy forwarded to the DLA Contracting Officer. Continuous identification markings are mandatory on each unit, including contract number, NSN, specification revision, alloy grade, temper, manufacturer, heat and lot number, and exact dimensions, with permitted marking methods limited to stamping or stenciling that ensures legibility and durability without contamination. The material must be supplied in whole-foot lengths only and packaged per MIL-STD-2073-1E with preservation methods compliant with ASTM B660 and marking as per MIL-STD-129. Unit of issue is sheet, with a quantity of six units required under procurement request 7017758407, delivered FOB origin to DLA Distribution San Diego by February 1, 2027, with zero tolerance for quantity variance. The contract prohibits test coupons and mandates full compliance with all technical, quality, packaging, and marking requirements referenced from the DLA Master List of Technical and Quality Requirements.
Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327215
New
DIBBS
WINDOW, OBSERVATION
Solicitation # SPE8E5-26-T-3794
This contract pertains to the procurement of 12 observation windows under NSN 9340-01-280-5367, issued through solicitation SPE8E5-26-T-3794, with a total contract value of $144.00 at $12.00 per unit. The items must be delivered within 167 days to the specified destination in San Diego, California, under FOB origin terms, and are subject to strict packaging standards including MIL-STD-2073-1E and MIL-STD-129, with special fragile marking and no use of plastics for wrapping or cushioning where feasible. The contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional components like batteries or instruments in compliance with NAVSEA 5100-003D, which also require secondary containment for portable devices. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date. The acquisition is a total small business set-aside under NAICS code 327215, and the packaging, marking, and delivery protocols must strictly adhere to DLA guidelines, including palletization per RP001 and transportation instructions outlined in DLAD Proc Notes C19 and C20. The required delivery date is March 24, 2027, with a need ship date of February 1, 2027, and inspection and acceptance occur at destination.
Glass Product Manufacturing Made of Purchased Glass

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333414
New
DIBBS
HEATER, WATER, ELECTRIC
Solicitation # SPE8E8-26-T-5045
The contract is for a single electric water heater identified by NSN 4520-12-317-7848 and part number 0002035996, sourced from manufacturers including NAVANTIA PROPULSION Y ENERGIA and MTU Friedrichshafen GmbH. It is issued under solicitation SPE8E8-26-T-5045 with a required delivery deadline of 167 days from award, and delivery must occur FOB origin with no variance allowed in quantity. Inspection and acceptance occur at the destination, and the item must be packaged per ASTM D3951, with labeling and palletization strictly following MIL-STD-129 and DLA packaging requirements, which supersede any conflicting standards. The item is subject to all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and Covered Defense Information regulations may apply. Delivery is directed to DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581, with an original required delivery date of January 14, 2027, and a need ship date of February 1, 2027. The unit of issue is each, priced at one unit, and transportation logistics align with DLA procedural notes C19 and C20. The solicitation was posted August 5, 2026, with responses due by August 17, 2026, under NAICS code 333414, and the contracting office is the Department of Defense, San Diego, with primary contact Alexis Selby.
Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 331221
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-T-1952
This contract specifies the procurement of steel bars composed of Steel Comp 630, round in shape, centerless ground, with a diameter of 2.250 inches and lengths between 10 and 12 feet in whole-foot increments only, weighing approximately 13.520 pounds per foot. The material must comply with technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including the Certificate of Quality Compliance which must accompany each shipment and be forwarded to the contracting officer. Continuous identification markings are mandatory on every unit, including the DLA contract delivery order number, NSN, specification revision, grade, alloy, manufacturer’s name, heat and lot number, and dimensions. Markings must be applied via stenciling or stamping using waterproof, non-contaminating fluids that remain legible and stable under normal handling; adhesive labels are required for bars under 0.250 inches in nominal OD. Packaging must conform to MIL-STD-2073-1E and MIL-STD-129 with special codes Z and ZZ as defined by ASTM A700, and palletization must follow DLA packaging directives. The supplier must be listed on the Qualified Suppliers List for Distributors (QSLD) for FSGs 95 and 96, and failure to comply renders the bid non-compliant and subject to rejection. Suppliers not on the QSLD must explicitly declare their deviation, and any product sourced from an unauthorized distributor is considered an unauthorized substitution with potential criminal penalties. The technical data package references SAE AMS5643W and SAE AMS2806, and the contract requires CDRL-METALSCERT documentation. Delivery is FOB origin with a 167-day deadline, a 10% variance in quantity allowed, inspection and acceptance occurring at destination, and shipment destination specified as DLA Distribution San Diego. The solicitation number is SPE8E4-26-T-1952, the NSN is 9510-00-500-5434, and the quantity ordered is 58 linear feet with a unit price of $58.00 per foot, totaling $3,364.00. The requirement is classified as a critical application item under a federal procurement with specific handling, marking, and certification obligations enforced by the Department of Defense.
Rolled Steel Shape Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332410
New
DIBBS
CORE ASSEMBLY, FLUID
Solicitation # SPE8E8-26-T-5012
The contract pertains to the procurement of one unit of a Core Assembly, Fluid Cooler with NSN 4420-01-504-5631 under purchase request 7017757897, requiring delivery within 167 days after order. The solicitation number is SPE8E8-26-T-5012, issued on August 5, 2026, with a response deadline of August 17, 2026, and is designated as a Total Small Business Set-Aside under FAR 19.5, with NAICS code 332410 for Machine Shop, Turned Product, and Screw Machine Product Manufacturing. The contracting activity is managed by the Department of Defense through the San Diego office, with the place of performance located at 92136-3581. Compliance is mandated with DLA Packaging Requirements for Procurement and all referenced technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for large acquisitions or the award date for simplified acquisitions. Government identification must be removed from any non-accepted supplies as per RQ011. Primary point of contact for the solicitation is Alexis Selby, reachable via email and phone provided.
Power Boiler and Heat Exchanger Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332119
New
DIBBS
PRESS, ARBOR, HAND OPERA
Solicitation # SPE8E5-26-T-3777
The contract is for one hand-operated press and arbor unit, identified by NSN 3444-00-262-4242, with a purchase request number 7017757316 and contract number SPE8E5-26-T-3777. Delivery is required within 167 days from the contract award date, with the original required delivery date set for August 1, 2027, and a need ship date of February 1, 2027. The item is to be delivered FOB origin with no quantity variance allowed, inspected and accepted at the destination. Packaging must comply with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, mandating compliance with MIL-STD-129 for marking and labeling. Palletization must follow DLA packaging requirements, and the unit of issue is each (EA). Technical and quality requirements referenced by R and I numbers are defined in the DLA Master List of Technical and Quality Requirements, with revisions controlled based on solicitation or award date depending on acquisition size. Sampling and inspection must adhere to MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise specified, and attributes must be verified at specified levels corresponding to AQLs of 0.1, 1.0, and 4.0 for critical, major, and minor characteristics respectively. Covered defense information applies, and associated technical data packages are referenced with revision numbers and CDRL-SHIPMANUL. All deliverables must meet the DLA Technical Data Management Transformation requirements, and the shipping destination is DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
TUBE ASSEMBLY, FIRE
Solicitation # SPE8E6-26-T-3991
The contract is for the procurement of two tube assemblies for a fire extinguishing system, identified by part number 65506-09014-042 and NSN 4210000895252, to be supplied by ROTAIR AIRCRAFT CORP to SIKORSKY AIRCRAFT CORP. The item must conform to stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, which supersede commercial packaging standards such as ASTM D3951. All packaging and labeling must comply with MIL-STD-129 and DLA’s packaging requirements, with hazardous material handling governed by FED-STD-313 and TQ requirement IP025 if applicable. The item must be marked in accordance with MIL-STD-130N for U.S. military property identification and is subject to Covered Defense Information protocols. The supplier must meet Cybersecurity Maturity Model Certification Level 2 self-assessment requirements, and the delivery is FOB origin with no variance allowed in quantity. Inspection and acceptance occur at the destination, with a required delivery date of February 1, 2027, and a lead time of 167 days from the contract award. The unit of issue is each, with a total contract value based on the specified quantity. The contract is issued under solicitation SPE8E6-26-T-3991 with performance directed to DLA Distribution in San Diego, California, and procurement is restricted due to proprietary or insufficient data for competitive bidding.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 331110
New
DIBBS
PLATE, METAL
Solicitation # SPE8E4-26-T-1946
A metal plate made of aluminum alloy with a thickness of 3.500 inches, a width of 48.00 inches, and a length of 96.00 inches is being procured with a reference weight of 1612.80 pounds per piece. The item is identified by NSN 9535-00-508-8611 and is part of a single-unit purchase under Purchase Request 7017757998. The delivery is scheduled for 167 days after order placement. This item is subject to stringent export control regulations under ITAR or EAR, meaning any technical data associated with it cannot be disclosed to foreign persons, regardless of location, without prior approval from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this controlled technical data, and only DLA contractors with an approved US/Canada Joint Certification Program certification, completed training on handling DOD export-controlled data, and approved access by the DLA controlling authority may receive or handle the information. The contract requires CMMC Level 2 certification by a certified third-party assessment organization for cybersecurity compliance. The solicitation is managed by the Department of Defense under office SAN DIEGO with a response deadline of August 17, 2026, and the contract data is accessible via the DIBBS portal.
Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE8E6-26-T-4038
The contract specifies the procurement of a hose assembly, nonmetallic, under solicitation SPE8E6-26-T-4038, with a total quantity of 20 units at a unit price of $20.00, resulting in a total price of $400.00. The item is identified by NSN 4720-01-668-3765 and part number MS8005E874A, and must comply with technical and quality requirements from the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with precedence over other standards such as ASTM D3951. Packaging and labeling must adhere to MIL-STD-129 and RP001, and palletization must follow DLA procurement guidelines. The delivery is FOB origin, with inspection and acceptance occurring at the destination after a 69-day delivery window, and the required ship date is October 26, 2026, with an original delivery deadline of January 21, 2027. The quantity variance is fixed at zero percent, and the item must be packaged in accordance with the contract’s specified unit of issue. Government identification must be removed from non-accepted supplies, and covered defense information provisions apply. All packaging and documentation must reflect the correct unit of issue as defined by DLA, and the delivery address is DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581. Transportation instructions are governed by DLAD Proc Notes C19 and C20.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332216
New
DIBBS
TIP, SUCTION DEVICE,
Solicitation # SPE8E5-26-T-3810
This contract pertains to the procurement of 47 units of a suction device tip, identified by NSN 3439-01-399-4904 and part number 1121-0417-P1, under solicitation SPE8E5-26-T-3810. The item must be new and unused, packaged in strict compliance with MIL-STD-2073-1E and MIL-STD-129 marking requirements, and delivered FOB origin with no quantity variance permitted. Delivery is required within 167 days from the contract date, with inspection and acceptance occurring at the destination point, specifically DLA Distribution San Diego. The contractor must adhere to DLA’s packaging standards, including the use of approved unit containers and palletization protocols, and all shipments must comply with hazardous materials handling procedures outlined in IP025. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, requiring zero non-conformances in sampled lots unless otherwise directed, with critical, major, and minor attributes assigned verification levels of VII, IV, and II or corresponding AQLs of 0.1, 1.0, and 4.0. Mercury or mercury-containing compounds are strictly prohibited from direct contact with the product except for functional uses in batteries, fluorescent instruments, sensors, controls, weapon systems, or specified chemical reagents per NAVSEA guidelines; portable devices containing mercury must include a secondary containment barrier. Technical and quality requirements are referenced from the DLA Master List, and the contract incorporates applicable defense standards for documentation and sampling methods. The delivery deadline is set for February 1, 2027, with an original required delivery date of November 24, 2026, and all communications and inquiries should be directed to the primary point of contact, Brandon Wicker.
Saw Blade and Handtool Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333310
New
DIBBS
FILTER ELEMENT, REVERSE
Solicitation # SPE8E8-26-T-5024
The contract specifies the procurement of 42 reverse osmosis filter elements under NSN 4610016323173 and part numbers FILMTEC CORP 63624 P/N 12082966 and SW30-404080741, with a unit price of $42.00 per item for a total contract value of $1,764.00. Delivery is required within 167 days from the contract award, with FOB origin terms and zero tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must strictly comply with ASTM D3951 and MIL-STD-129 labeling requirements, with palletization following DLA Packaging Requirements. Mercury and mercury compounds are strictly prohibited in all preservation, packaging, and marking processes. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, which override any conflicting commercial standards. The unit of issue is each (EA), and all packaging must reflect the specified Quantity per Unit Pack (QUP) as outlined in the contract. The contract was issued under solicitation SPE8E8-26-T-5024 as a total small business set-aside with NAICS code 333310, posted on August 5, 2026, with responses due by August 17, 2026. Delivery is to be made to DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581, with a required ship date of February 1, 2027, though the original delivery deadline was October 25, 2026. Transportation instructions are referenced through DLAD Proc Notes C19 and C20. Point of contact for inquiries is Alexis Selby, with email and phone provided. All documentation, including unit of issue details, must align with the official DLA unit of issue spreadsheet, and compliance with government procurement regulations, including coverage of defense information, is mandatory.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details