Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

VALVE, GATE

Active
SPE7MC-26-T-142JFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of a single 3/4 inch, 150 PSI cast iron gate valve with threaded bronze trim, identified by NSN 4820013077342 and part number 490-006 from Crane Co Division Valve Division. The item is to be delivered FOB origin within 20 days after award, with a required delivery date of May 14, 2025, and no variance allowed in quantity. The valve must be packaged in accordance with ASTM D3951, with all packaging and labeling conforming to MIL-STD-129 and palletization adhering to DLA’s RP001 requirements. The DLA Master List of Technical and Quality Requirements controls all technical and quality specifications, superseding any other standards. The contractor is responsible for sourcing and manufacturing, as the government may not possess necessary tooling for casting or forging, and a Casting and Forging Assistance Request may be required for production support. The shipment must be sent via the fastest traceable means, excluding parcel post, to the designated delivery point at Fort Eustis, VA, and must be marked with the prescribed Transportation Control Number, RDD, project code, and other required identifiers. The contract incorporates numerous mandatory Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS) clauses governing compliance in areas including equal opportunity, trafficking in persons, employment verification, sustainable procurement, hazardous material handling, cybersecurity safeguards, subcontracting, inspection, and payment processing. All submissions and deliveries must use the Wide Area WorkFlow system for invoicing and receiving reports. The contractor must maintain current representations in the System for Award Management, disclose any joint venture partners and their Unique Entity Identifiers, and comply with stringent requirements on export controls, prohibition of hexavalent chromium and covered defense telecommunications equipment, and safeguarding of covered defense information. The inspection and acceptance point is at the destination, with government authority retained for final determination of conformity. The contract value is $1.00 for the single unit, with additional line items totaling approximately $16,180.92, though their relevance to this specific item is unclear. Proposals must be submitted electronically via the DLA Internet Bid Board System by the deadline of July 31, 2026, and no paper submissions or alternative delivery methods will be accepted.

General Info

Cast iron gate valve, 3/4 inch, 150 PSI, bronze trim, one unit, FOB origin, deliver to Fort Eustis by May 14, 2025.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

332911 - Industrial Valve ManufacturingView NAICS

Place of Performance

BLDG 1610 PATCH ROAD, FORT EUSTIS, VA, 23604-0000, US

Set-Aside

NONE

Documents

(1)

Request for Quotations SPE7MC-26-T-142J

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Defense Logistics Agency
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → Defense Logistics Agency
View Agency Profile
Office AddressUS
Contacts
Paula Mcclary
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
VALVE,GATE
VALVE, GATE, CAST IRON , SIZE 3/4 INCH, 150 PSI
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
PRESSURE CLASS, END CONNECTIONS-INTERNALLY
THREADED. BRONZE TRIM.
Casting/forging may be required to manufacture this NSN and tooling is typically involved. The government may not have this special tooling. For sourcing, tooling, materials or other information, please submit a Casting and Forging Assistance Request at either https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/ or Land & Maritime Supply Chains DSCC.cast.forge@dla.mil.
CRANE CO DIV VALVE DIV 14959 P/N 490-006
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017540682 0001 EA 1.000
NSN/MATERIAL:4820013077342
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
SPE7MC-26-T-142J
SECTION B
PR: 7017540682 PRLI: 0001 CONT’D
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W26DDJ
W6YN USALRCTR JB LANGLEY
BLDG 1610 PATCH ROAD
FORT EUSTIS VA 23604-1607
US
RDD 555 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W51AEV
0329 TC CO DET B3 LANDING
BLDG 1610 PATCH ROAD
FORT EUSTIS VA 23604-0000
US
MARKFOR
W51AEV
0329 TC CO DET B3 LANDING
BLDG 1610 PATCH ROAD
FORT EUSTIS VA 23604-0000
US
M/F: (TCN) W51AEV51290011
RDD: 555
PROJ: TP 3
SUPP ADD: W26RK4 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 12
DIC: A3A DIST: ADV: FC: 9F
Need Ship Date:00/00/0000 Original Required Delivery Date:05/14/2025
SPE7MC-26-T-142J NSN/Part Number: 4820-01-307-7342 Quantity: 1 EA Purchase Request: 7017540682QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332911
New
DIBBS
Manufacturing of Cast Iron Gate ValvesThe contract calls for the full production of 3/4-inch, 150 PSI cast iron gate valves equipped with threaded bronze trim, encompassing all stages from casting and machining to assembly and rigorous quality control processes, all conducted in strict compliance with military specifications. The work must meet exacting standards for durability, performance, and reliability to ensure operational readiness in demanding defense applications. All manufacturing activities are required to be performed in accordance with established defense industry protocols to guarantee consistency and traceability across production batches. The solicitation is issued as a subcontract under the NAICS code 332911 for other metal valve and pipe fitting manufacturing, managed by the Defense Logistics Agency on behalf of the Department of Defense. The place of performance is designated as Fort Eustis, Virginia, with a response deadline set for July 31, 2026. The contract requires bidders to demonstrate proven capability in producing defense-grade valve systems, including access to certified facilities, qualified personnel, and documented quality assurance systems capable of meeting federal defense requirements without reliance on external or noncompliant subcontractors.
Defense Logistics Agency

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
Pipe Reducer Supply (Commercial Off-The-Shelf Item)The contract involves the procurement and delivery of four units of pipe reducers classified as commercial off-the-shelf items, meeting all technical requirements specified by the Defense Logistics Agency. These components are intended for use within fluid handling systems under the Department of Defense and must comply strictly with established DLA technical standards to ensure interoperability and performance in operational environments. The procurement is structured as a subcontract and is not subject to any set-aside classifications, indicating open competition among qualified vendors. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, providing a ten-day window for submissions. The place of performance is designated as APO 96319-5014, suggesting delivery to a U.S. military overseas or expeditionary location. The North American Industry Classification System code 332911 confirms the supplier must operate within the pipe and tube fitting manufacturing sector. All bids must align with the commercial item definition, meaning the reducers must be previously sold to the general public in substantial quantities without modification and must be offered at established catalog or market prices. The contract is managed through the DLA’s procurement system under reference number SPE7M326T7556.
FLUID HANDLING DIVISION

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
Precision Valve Seat ManufacturingA single high-specification valve seat must be manufactured to meet military-grade engineering standards and comply with the National Stock Number 4820-01-477-4574, ensuring strict adherence to performance, material, and dimensional specifications required for defense applications. The work is classified as a subcontract under NAICS code 332911 and is being sourced by the Defense Logistics Agency on behalf of the Department of Defense, with performance required at the FPO address designated by ZIP code 96691-1500. The opportunity was posted on July 20, 2026, and responses must be submitted no later than July 31, 2026, with no set-aside provisions specified for small or disadvantaged businesses. The contract is accessible through the DIBBS portal using the reference number SPE7MC26T142C, and all submissions must demonstrate full capability to meet the exacting military requirements without deviation.
Defense Logistics Agency

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
Precision Machining of Regulating ValvesThe contract requires the manufacture of five copper alloy regulating valves to meet rigorous military specifications, encompassing precision machining, assembly, and comprehensive functional testing. Each valve must be produced with full traceability from raw material through final inspection, accompanied by complete material certifications to ensure compliance with defense standards. The work must adhere to exacting quality controls to guarantee performance under demanding operational conditions, with documentation supporting every stage of production. Issued as a subcontract under the Defense Logistics Agency, part of the Department of Defense, the contract is classified under NAICS code 332911, indicating it pertains to other fabricated metal product manufacturing. The solicitation was posted on July 20, 2026, and the place of performance is not specified, but the work is expected to align with federal defense procurement requirements. The contract reference number SPE7MC26P3152 is accessible via the DIBBS system for official records and award tracking.
Defense Logistics Agency

POSTED

about 14 hours ago

DEADLINE

N/A
View Details
NAICS: 332911
New
DIBBS
VALVE, SAFETY RELIEFThe contract pertains to the procurement of 250 units of a safety relief valve with NSN 4820011010025 under solicitation SPE7MC-26-T-126B, issued by the Department of Defense through DLA Land and Maritime. The item is being procured under a total small business set-aside with NAICS code 332911, and the contract requires full compliance with the DLA Master List of Technical and Quality Requirements, which override any referenced commercial standards such as ASTM D3951. Packaging and marking must conform to MIL-STD-129 for shipment and storage labeling, including barcoding, and palletization must adhere to RP001 specifications, with unit of issue and quantity per unit pack strictly matching contract requirements. Delivery is scheduled for FOB Origin with a 21-day After Date of Order timeline, and the final destination is DLA Distribution Jacksonville, Florida, where inspection and acceptance will occur. The contract mandates adherence to cybersecurity standards, including a CMMC Level 2 self-assessment and implementation of the Safeguarding Covered Defense Information and Cyber Incident Reporting clause (252.204-7012), along with NIST SP 800-171 assessment requirements. All hazardous materials must be identified, labeled, and documented per 29 CFR 1910.1200, with Safety Data Sheets submitted prior to award, and contractors must flow these requirements down to subcontractors. The contract requires electronic submission of invoices and receiving reports through WAWF and includes clauses on small business representation, employment eligibility, trafficking in persons, and prohibitions on restricted telecommunications equipment. Payment is expected to be processed electronically, and no fixed-unit price is confirmed in the contract line item, though the total extended price is listed as $250.000 for the full quantity. All offerors must hold a current UEI and CAGE code and accurately represent their small business status, including any joint venture affiliations, and the solicitation was issued with a response deadline of July 23, 2026, for delivery on or before October 31, 2026, with an urgent need ship date of August 11, 2026.
JACKSONVILLE BLDG

POSTED

about 14 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332911
New
DIBBS
VALVE ASSEMBLYThe valve assembly is a critical application item identified by part number 6D227 and NSN 4820-01-654-3727, supplied by Allen Aircraft Products Inc, with a single unit required under purchase request 7017522901. Delivery is due within 20 days from contract award, FOB origin, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and the item must be packaged and marked in strict accordance with MIL-STD-2073-1E and MIL-STD-129, with no special marking required. Packaging must comply with DLA’s procedural requirements, and shipment must be made by traceable means—parcel post is prohibited. The item is subject to Federal Aviation Administration airworthiness approval and must be uniquely identified with IUID per MIL-STD-130 and DFARS 252.211-7003. The contractor must retain full supply chain traceability documentation as outlined in DLAD Procurement Note C03. Sampling follows zero-defect standards using MIL-STD-1916 or comparable methods, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, and the contract incorporates specific CDRLs and data packages. The delivery address is Joint Base McGuire-Dix-Lakehurst, New Jersey, and the point of contact is Paula McClary at DLA. The solicitation was issued with a response deadline of July 31, 2026, and the original required delivery date is July 15, 2026.
Defense Logistics Agency

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
PISTON, VALVEThe contract is for the procurement of two piston valve units under NSN 4820-01-476-3727 with part numbers 21216 and 21216-1001-1 sourced from Sargent Aerospace & Defense, LLC, designated as a critical application item. Delivery is required within 98 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with shipment terms FOB origin and inspection and acceptance occurring at destination. The contract prohibits intentional addition or direct contact of mercury or mercury-containing compounds unless exempted for specific applications like batteries, fluorescent lamps, sensors, or weapon systems, with portable devices required to have shock-proof construction and a secondary containment boundary per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E, including specific methods for preservation, wrapping, and containerization, while marking must align with MIL-STD-129 and no special marking is required. Packaging and palletization follow DLA’s procurement requirements, and transportation logistics are governed by DLAD procedural notes C19 and C20. The purchase request number is 7012190861, the unit price is not specified beyond a total price of $2.00 for two units, and the original required delivery date is December 14, 2025, with a need ship date of November 4, 2025. The solicitation issued under SPE7M4-26-T-270M references the DLA Master List of Technical and Quality Requirements, with revisions controlled based on acquisition size and amendment dates. All technical and quality specifications are incorporated by reference and must be met as defined in the DLA system.
FLUID HANDLING DIVISION

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
VALVE ASSEMBLY, MANI
DLA DIST SAN JOAQUIN

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
VALVE, GLOBEThis contract specifies the procurement of a globe valve with an inline union end, nominal size 3/8 inches, constructed from bronze with a nickel alloy seat, stem, and disc, rated for a maximum pressure of 6000 PSI and a maximum temperature of 230 degrees Fahrenheit, featuring Viton preformed packing. The item is classified as a critical application item and must comply with Class 3 threads. The valve must not contain or come into direct contact with mercury or mercury-containing compounds, except as permitted for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or specific chemical reagents authorized by NAVSEA. Portable devices containing mercury must be shockproof and include a secondary containment boundary in accordance with NAVSEA 5100-003D. The valve must be supplied under the NSN 4820012439945 with approved part numbers C8026 from Admiral Valve LLC and 6GP80-2 P/L-1508 from Hydrasearch Company, LLC. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 standards, with no special marking required, and palletization must follow DLA packaging requirements. Delivery is FOB origin with zero variance allowed in quantity, inspected and accepted at destination. The contract requires delivery of 12 units within 385 days, with a required ship date of August 10, 2027, and original delivery date of October 24, 2027. The contract is issued under solicitation SPE7MC-26-T-127A, with a unit price of $12 per unit totaling $144, and is governed by DLA technical and quality requirements referenced in their master list. The destination for delivery is the DLA Distribution DDSP New Cumberland Facility in Pennsylvania.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 14 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332911
New
DIBBS
VALVE, CHECKThe contract is for the procurement of eight check valves, part number 79C41, with NSN 4820-01-290-3415, supplied by AUTO-VALVE, INC. Each valve is priced at $8.00 per unit, with a total contract value of $64.00, and delivery is required within 168 days to the DLA Distribution facility in San Diego, California, under FOB origin terms. The quantity has zero variance tolerance, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, with all packaging and labeling requirements governed by the DLA Master List of Technical and Quality Requirements, which supersedes any conflicting standards. Palletization must adhere to DLA’s packaging directives. The unit of issue is each, and the shipment must be delivered no later than January 5, 2027, with an original required delivery date of January 28, 2027. The solicitation number is SPE7MC-26-T-127H, issued on July 9, 2026, with responses due by July 20, 2026. The contract falls under NAICS code 332911 and is managed by the Department of Defense. All technical and quality specifications referenced by R or I numbers are incorporated from the DLA Master List, and removal of government identification from rejected items is mandatory. Transportation procedures follow DLAD Proc Note C19 and C20.
SAN DIEGO

POSTED

about 14 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SAFETY RELIEF
DDSP NEW CUMBERLAND FACILITY

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
VALVE, CALIBRATED FLOWThe contract is for the procurement of three calibrated flow control valves, identified by NSN 4820014127604 and part number P/N 3500040-003, under solicitation SPE7MC-26-T-128U, issued by the Department of Defense through the DDSP New Cumberland Facility. Delivery is required within 168 days after award, with a target ship date of January 5, 2027, and FOB destination terms apply, meaning risk and responsibility transfer upon arrival at the designated delivery point: DDSP New Cumberland Facility in New Cumberland, PA. Inspection and acceptance occur at the destination, with the government retaining full authority over compliance verification. Packaging must conform to ASTM D3951 and be marked and labeled per MIL-STD-129, including 2D Data Matrix barcoding with NSN, quantity, and unit of issue details; palletization must adhere to DLA’s RP001 requirements, and all packaging directives are superseded by the DLA Master List of Technical and Quality Requirements. The valves must be free of intentional mercury or mercury-containing compounds, except for approved functional uses in batteries, lamps, sensors, or weapon systems, with portable mercury-containing devices requiring shockproof design and secondary containment per NAVSEA 5100-003D. The solicitation mandates full compliance with numerous DFARS and FAR clauses covering cybersecurity (NIST SP 800-171, cyber incident reporting), hazardous material handling, trafficking in persons, employment eligibility verification, sustainable products, whistleblower protections, and prohibition of covered defense telecommunications equipment from certain foreign sources. Payment must be processed via Wide Area WorkFlow with invoices submitted as Invoice and Receiving Report for fixed-price items, and the contracting officer's point of contact is Paula McClary of the DLA. Offerors must affirm size status and socioeconomic certifications, disclose UEI and CAGE codes where applicable, and submit responses exclusively through DIBBS by the July 20, 2026 deadline, with no physical submissions accepted. The contract includes no option quantities, estimated value is not specified, and award will be made on a price and compliance basis without clearly defined evaluation weights.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 14 hours ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

NAICS: 283410
New
DIBBS
Supply of Epinephrine Injection (NSN: 6505015273957)The contract mandates the manufacture, packaging, labeling, and delivery of FDA-approved Epinephrine Injection meeting all current Good Manufacturing Practices and Defense Logistics Agency specifications, with the final product destined for a U.S. Navy vessel under FOB Destination terms. The product is identifiable by National Stock Number 6505015273957 and falls under the NAICS code 283410, indicating its classification within pharmaceutical manufacturing. All activities must adhere strictly to regulatory and military standards to ensure safety, potency, and compliance throughout the supply chain. The agreement is structured as a subcontract managed under the Department of Defense through the Defense Logistics Agency, with the work scheduled to be performed in alignment with federal procurement timelines and delivery protocols. The contract was posted on July 20, 2026, and the delivery endpoint is a U.S. Navy vessel, requiring precise logistical coordination and documentation to meet military operational needs. The product must be fully compliant with both FDA and DLA requirements, including proper labeling, traceability, and packaging suitable for military transport and storage conditions.

POSTED

about 14 hours ago

DEADLINE

N/A
View Details
NAICS: 332996
New
DIBBS
Wiper Ring Supply – Precision Sealing ComponentThe contract entails the supply of 17 precision-engineered wiper rings, identified by Part Number 351-44900-330A and National Stock Number 5330-01-284-1598, manufactured to meet specific military standards for performance and reliability. Each unit must comply with all relevant technical and quality requirements, including proper packaging and labeling as dictated by defense regulations. Delivery must be completed in full accordance with established logistical protocols to ensure operational readiness and traceability. The contract is structured as a subcontract under the authority of the Defense Logistics Agency, part of the Department of Defense, and classified under NAICS code 332996, indicating its focus on other fabricated metal product manufacturing. The solicitation was posted on July 20, 2026, and performance is expected to align with DLA’s supply chain directives, though the specific delivery location and point of contact are not detailed. Access to official contract records is available through the DIBBS portal using the provided reference number.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 14 hours ago

DEADLINE

N/A
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance for Covered Defense InformationThe contract requires the implementation and ongoing maintenance of cybersecurity controls aligned with NIST SP 800-171 to protect covered defense information handled by the contractor. This includes establishing and sustaining a compliant security posture across systems and networks that process, store, or transmit sensitive defense data, ensuring that all required controls are properly configured, monitored, and documented. The contractor must also be prepared to support timely and accurate cyber incident reporting in accordance with federal requirements, enabling rapid response and coordination with defense authorities when security breaches or anomalies occur. This subcontract falls under the NAICS code 541512 for computer systems design services and is issued by the Defense Logistics Agency under the Department of Defense. The work is focused on sustaining compliance with stringent federal cybersecurity standards, and while no specific location is listed for performance, the obligations apply wherever covered defense information is accessed or managed. The contract underscores a critical requirement for continuous adherence to NIST controls and active participation in the defense cyber incident response framework, making cybersecurity expertise and operational readiness key to successful contract execution.
Computer Systems Design Services

POSTED

about 14 hours ago

DEADLINE

N/A
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance & DocumentationThe contract requires strict adherence to OSHA Hazard Communication standards and DFARS 252.223-7001 for all hazardous materials linked to connectors, ensuring proper labeling and accurate safety data sheet generation to meet federal regulatory requirements. All documentation must align with current guidelines to facilitate safe handling, storage, and disposal of chemical substances used in the procurement and integration of these components. This subcontract, issued under NAICS code 541620 by the Defense Logistics Agency within the Department of Defense, mandates compliance as a non-negotiable condition of performance. While specifics on location or point of contact are not provided, the obligation extends to all stages involving hazardous materials associated with connectors, and failure to deliver compliant labeling and SDS documentation could result in contract non-compliance. The posting date indicates this requirement is active for future performance beginning in 2026.
Environmental Consulting Services

POSTED

about 14 hours ago

DEADLINE

N/A
View Details
NAICS: 541330
New
DIBBS
Quality Assurance and Inspection ServicesThe contract requires the performance of zero-defect quality inspections using either MIL-STD-1916 or ASQ H1331 sampling methods to verify that all delivered products meet the stringent acceptance standards of the Defense Logistics Agency. These inspections are critical to ensuring full conformance and are conducted to support DLA’s mission of reliably supplying defense systems and materiel with no tolerance for nonconformities. The work is classified under NAICS code 541330, indicating it falls within the professional, scientific, and technical services sector, specifically in the realm of quality assurance and inspection. The contract is structured as a subcontract and is tied directly to DLA operations under the Department of Defense, with performance expected to align precisely with federal quality benchmarks without deviation. All activities must be executed to guarantee that every unit received by DLA is fully compliant, with no room for defective or nonconforming product acceptance.
Engineering Services

POSTED

about 14 hours ago

DEADLINE

N/A
View Details
NAICS: 423840
New
DIBBS
Packaging and Marking of Military-Grade ComponentsThe contract requires the provision of packaging and marking services for electrical connectors in strict compliance with MIL-STD-2073-1E for packaging standards and MIL-STD-129 for item marking, all in support of the Defense Logistics Agency. The components are destined for military use under the Department of Defense and must meet exacting federal specifications to ensure durability, traceability, and logistical compatibility across the defense supply chain. The work is structured as a subcontract under NAICS code 423840, which pertains to wholesale trade of electronic components and equipment, indicating the scope is focused on preparation and shipment readiness rather than manufacturing. Performance is expected to align with DLA’s standards for federal supply systems, though no specific location for performance or point of contact is listed. The solicitation is posted under contract SPE7M126V050N and was published on July 20, 2026, with no set-aside provisions indicated, meaning it is open to all qualified subcontractors. Full adherence to military standards is critical, as non-compliance could result in rejection of shipments, delays in delivery, or financial penalties. All packaging must preserve the integrity of the connectors during transport and storage, while marking must include universally recognized DOD identifiers, barcodes, and data matrix codes to enable automated receipt and inventory management at military depots worldwide.
Industrial Supplies Merchant Wholesalers

POSTED

about 14 hours ago

DEADLINE

N/A
View Details
NAICS: 334417
New
DIBBS
Supply of Electrical Plug Connectors (MS3406D40-56P / NSN 5935011427787)The contract entails the manufacture and supply of 43 military-spec electrical plug connectors specified as MS3406D40-56P with the NSN 5935011427787, all of which must fully comply with applicable MIL standards to ensure reliability and interoperability in defense systems. The item is critical for military applications requiring high-performance electrical connections under demanding environmental and operational conditions. This is a subcontract issued under the authority of the Defense Logistics Agency within the Department of Defense, with a posting date of July 20, 2026, indicating it is part of a broader procurement effort managed through the DLA’s contracting system. The NAICS code 334417 confirms the scope falls within the aerospace and electronic component manufacturing sector. Performance location and specific delivery details are not yet defined, and no set-aside provisions are indicated, meaning the contract is open to all eligible contractors. The sole point of reference for award and tracking purposes is the DIBBS system under contract number SPE7M126V050N.
Electronic Connector Manufacturing

POSTED

about 14 hours ago

DEADLINE

N/A
View Details
NAICS: 484220
New
DIBBS
Domestic Freight and Delivery to DLA DepotTwo reconditioned circuit card assemblies must be transported from the rework facility to the DLA Distribution Depot in Tracy, California, with delivery required no later than August 19, 2026. The shipment is governed by FOB Origin terms, meaning the buyer assumes all risk and responsibility for the goods once they leave the rework facility. The contract falls under NAICS code 484220, indicating it is a domestic freight transportation service, and is classified as a subcontract within the Department of Defense framework. The Defense Logistics Agency is the contracting organization, and the work is being performed under solicitation SPE4A626PX555, with the opportunity posted on July 20, 2026.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 14 hours ago

DEADLINE

N/A
View Details
NAICS: 541611
New
DIBBS
Supply Chain Traceability and Documentation ServicesThe contract requires the compilation and verification of detailed documentation to establish the prior government ownership and reconditioning history of surplus electronic items, ensuring full compliance with federal requirements prior to submission. This work is critical for maintaining the integrity and traceability of the defense supply chain, as accurate records are necessary to confirm legal and regulatory adherence throughout the lifecycle of the equipment. The contractor must rigorously authenticate provenance and reconditioning data to support transparency and accountability in the disposition process. This subcontract is part of a larger effort managed by the Defense Logistics Agency under the Department of Defense, aligning with NAICS code 541611 for management consulting services. The project involves meticulous record gathering, validation, and formatting to meet stringent government standards, with no specific location specified for performance. The solicitation was posted in July 2026 and is tied to contract SPE4A626PX555, indicating its role within an established procurement pathway for supporting defense logistics operations.
Administrative Management and General Management Consulting Services

POSTED

about 14 hours ago

DEADLINE

N/A
View Details
NAICS: 493190
New
DIBBS
Inspection, Packaging, and Marking of Reconditioned ElectronicsThe contract pertains to the final inspection, preservation, packaging, and labeling of reconditioned circuit card assemblies to ensure full compliance with military packaging and marking standards. This effort is critical to maintaining the integrity, functionality, and traceability of electronic components used in defense systems, requiring strict adherence to established federal and military specifications throughout every phase of handling. The work involves detailed quality control procedures to verify that each assembly meets performance criteria prior to being preserved against environmental degradation, securely packaged, and accurately labeled in accordance with mandated military protocols. This subcontract is issued under the Department of Defense, specifically managed by the Defense Logistics Agency, and falls under the NAICS code 493190 for other warehousing and storage. The solicitation was posted on July 20, 2026, and the place of performance is not specified, suggesting the work may be conducted at any approved contractor facility capable of meeting the rigorous defense standards. The contract's purpose is to support the sustainment and readiness of military electronics by ensuring that reconditioned components are handled, stored, and shipped with the same precision and reliability as new units, thereby reinforcing the logistical backbone of defense operations.
Other Warehousing and Storage

POSTED

about 14 hours ago

DEADLINE

N/A
View Details
NAICS: 334418
New
DIBBS
Reconditioning of Government Surplus Circuit Card AssembliesThe contract entails the reconditioning of government surplus circuit card assemblies to restore them to original technical specifications and military standards for reuse. This involves the systematic replacement of expired or degraded components, thorough functional testing to ensure operational integrity, and adherence to all applicable military performance and reliability requirements. The work must be performed with precision to guarantee that the returned assemblies meet the identical functional and environmental criteria as newly manufactured units, ensuring they are fully viable for military systems and platforms. This subcontract is issued under the Defense Logistics Agency within the Department of Defense and falls under NAICS code 334418 for electronic component and product manufacturing. The solicitation was posted on July 20, 2026, and the performance location and point of contact details are not specified, though the work is tied to DLA’s broader initiative to extend the life cycle of critical electronic assets. The contractor is expected to deliver reconditioned assemblies that are fully compliant, documented, and ready for immediate integration into defense systems without the need for additional modification or qualification.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 14 hours ago

DEADLINE

N/A
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance (CMMC Level 2)The contract requires the implementation and ongoing maintenance of NIST SP 800-171 security controls to protect covered defense information, ensuring alignment with the Defense Federal Acquisition Regulation Supplement (DFARS) 252.204-7012. This includes establishing robust cyber incident reporting procedures to meet federal requirements for timely disclosure of security breaches involving sensitive defense data. The work must support compliance at the Cybersecurity Maturity Model Certification Level 2 standard, which demands a structured approach to cybersecurity readiness, documentation, and continuous monitoring across the organization’s information systems. The effort is classified as a subcontract under the Department of Defense, specifically managed by the Defense Logistics Agency, and falls under the NAICS code for computer systems design and related services. Performance is expected to be carried out in support of federal defense operations, with no geographic restrictions specified.
Computer Systems Design Services

POSTED

about 14 hours ago

DEADLINE

N/A
View Details