Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

VALVE, GLOBE

Active
SPE7MC-26-T-164CFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

A 1/2 inch needle valve with 1000 PSI rating and 0.50 inch NPS union ends is being procured for use in LPD 24 reverse osmosis piping systems, manufactured by Parker Hannifin Corporation under part number M4352. The item is identified by NSN 4820015472456 and is classified as a critical application item with strict compliance requirements including prohibitions on mercury or mercury-containing compounds in any component, packaging, or preservation materials, except as permitted in functional batteries or fluorescent lights that must meet additional containment and shockproof standards per NAVSEA 5100-003D. Three units are required with zero variance allowed in quantity, delivered FOB origin within 158 days, and inspected and accepted at destination. Packaging must conform to MIL-STD-2073-1E and marking to MIL-STD-129 without special markings, and palletization follows DLA packaging requirements. Sampling inspection follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified. Cybersecurity compliance requires CMMC Level 2 self-assessment and the contract applies DFARS 252.211-7003 for item uniqueness. The acquisition is a total small business set-aside with NAICS code 332911 under solicitation SPE7MC-26-T-164C issued by the Defense Logistics Agency, with delivery destination at DLA Distribution San Diego.

General Info

1/2 inch needle valve, 1000 PSI, NPS union ends, Parker Hannifin M4352, NSN 4820015472456, three units, FOB origin, zero variance, CMMC Level 2, small business set-aside.

Agency

Department Of Defense → SAN DIEGOView Agency

NAICS

332911 - Industrial Valve ManufacturingView NAICS

Place of Performance

3581 CUMMINGS ROAD BLDG 3581, SAN DIEGO, CA, 92136-3581, US

Set-Aside

SBA

Documents

(1)

RFQ SPE7MC-26-T-164C Maritime Hardware/Electrical

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → SAN DIEGO
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → SAN DIEGO
View Agency Profile
Office AddressUS
Contacts
Paula Mcclary
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
VALVE,GLOBE
VALVE, GLOBE. 1/2 INCH NEEDLE VALVE, 1000 PSI. 0.50" NPS Union Ends Application: LPD 24 reverse osmosis piping.
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RT001: MEASURING AND TEST EQUIPMENT
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
SPE7MC-26-T-164C
SECTION B
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
CRITICAL APPLICATION ITEM
PARKER HANNIFIN CORPORATION 62144 P/N M4352
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017601559 0001 EA 3.000
NSN/MATERIAL:4820015472456
DELIVERY (IN DAYS):0158
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:42 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:JA CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:BS OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
PARCEL POST ADDRESS:
SW3218
DLA DISTRIBUTION SAN DIEGO
3581 CUMMINGS ROAD BLDG 3581
SAN DIEGO CA 92136-3581
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
SPE7MC-26-T-164C
SECTION B
PR: 7017601559 PRLI: 0001 CONT’D
FREIGHT SHIPPING ADDRESS:
SW3218
DLA DISTRIBUTION SAN DIEGO
3581 CUMMINGS ROAD BLDG 3581
SAN DIEGO CA 92136-3581
US
Need Ship Date:01/19/2027 Original Required Delivery Date:03/13/2027
SPE7MC-26-T-164C NSN/Part Number: 4820-01-547-2456 Quantity: 3 EA Purchase Request: 7017601559QTY: 3 Delivery: 158 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332911
New
DIBBS
Supply of Butterfly Valves (NSN 4820014220509)The contract requires the manufacture or supply of four butterfly valves adhering to military specifications for form, fit, and function, ensuring full compatibility with defense systems. All units must be new, officially traceable to the original equipment manufacturer or an authorized distributor, and must comply with strict packaging and marking standards as mandated by military protocols. The valves are identified by the National Stock Number 4820014220509 and are being procured under a subcontract issued by the Defense Logistics Agency on behalf of the Department of Defense. The solicitation was posted on August 2, 2026, with responses required by August 13, 2026, and the place of performance is designated as FPO with ZIP code 96678. The NAICS code 332911 indicates the industrial classification for other fabricated metal product manufacturing, aligning with the precision production requirements of the valves.
Defense Logistics Agency

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
Ball Valve Manufacturing and SupplyThe contract calls for the manufacture and supply of a specific ball valve identified by NSN 4820017076576 and part number 21B3ET-SWO-200-02CB, encompassing the full lifecycle from raw material acquisition through final packaging and labeling. All manufacturing activities including machining, assembly, and inspection must comply with quality standards suitable for defense applications, ensuring rigorous performance and reliability under operational conditions. The product is to be delivered to the New Cumberland facility with a ZIP code of 17070-5002, indicating the place of performance and final destination for the delivered goods. This subcontract, issued under NAICS code 332911 for Other Fabricated Metal Product Manufacturing, is managed by the Department of Defense through its DDSP New Cumberland Facility. The solicitation was posted on August 2, 2026, with responses required by August 13, 2026, leaving a narrow window for qualified suppliers to submit proposals. While no set-aside designation is specified, the nature of the contract and the agency involved suggest it is targeted toward vendors with expertise in defense-grade component production, and all work must meet stringent military specifications without reliance on external documentation or references.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
Metal Pipe Assembly ManufacturingThe contract involves the fabrication and delivery of three metal pipe assemblies identified by NSN 4710-01-648-5810, adhering strictly to Defense Logistics Agency technical, quality, packaging, and marking standards to ensure compatibility and reliability within the defense supply chain. The work must meet stringent military specifications and will be performed to support operational readiness, with the place of performance located in Tracy, California, under a subcontracting arrangement. All deliverables require precise compliance with DLA requirements for documentation, inspection, and labeling to facilitate seamless integration into defense logistics systems. The solicitation, posted on August 2, 2026, has a response deadline of August 13, 2026, and falls under NAICS code 332911 for other fabricated metal product manufacturing. The contracting agency is the Fluid Handling Division within the Department of Defense, which oversees procurement for critical fluid system components. No set-aside designation is specified, indicating open competition among qualified subcontractors. Although no point of contact is listed, interested parties must submit responses through the DIBBS portal via the provided link to be considered for award, with adherence to all technical and procedural guidelines being mandatory for evaluation.
FLUID HANDLING DIVISION

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
Safety Relief Valve Manufacturing and AssemblyThe contract requires the manufacture, testing, and delivery of 24 Safety Relief Valves identified by NSN 4820013397280, all constructed to meet military specifications and the referenced drawing revision dated 08/28/2024. Each unit must be properly packaged and delivered FOB Origin to DLA Tracy, California, with full compliance to all technical and quality standards outlined in the military requirements. The effort is governed under a Small Business Set-Aside classification, specifically reserved for total small business participation as defined by the SBA and FAR 19.5, ensuring only eligible small businesses may bid. The NAICS code 332911 applies to other fabricated metal product manufacturing, aligning with the assembly and production nature of the valves. The solicitation was posted on August 2, 2026, with a firm response deadline of August 13, 2026, and the contract type is listed as a subcontract. Performance is localized to Tracy, CA, with a ZIP code of 95304-5000, indicating the delivery point and operational focus for logistics. While the organizing agency is the DLA Dist San Joaquin under the Department of Defense, no point of contact details were provided within the data. The official posting can be accessed via the DIBBS platform using the provided link, but no additional terms or conditions beyond delivery, compliance, and set-aside status are described in the available information.
DLA DIST SAN JOAQUIN

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
Commercial Ball Valve Supply (Ported Type)The contract requires the supply of a single commercial off-the-shelf ball valve identified by NSN 4820014178455, which must meet military specifications for ported type operation. Delivery is to be made FOB destination with a strict requirement that the item be received within 20 days of award. The action is classified as a subcontract under NAICS code 332911 and is being managed by the Defense Logistics Agency on behalf of the Department of Defense. Performance is required at a military postal address in FPO with zip code 09582, indicating delivery to a deployed or overseas military location. The solicitation was posted on August 2, 2026, with responses due by August 13, 2026, leaving a limited window for submission. The contract is not set aside for any specific small business category, and all bids must ensure full compliance with applicable military standards for functionality, durability, and environmental suitability under operational conditions.
Defense Logistics Agency

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
High-Pressure Safety Relief Valve SupplyThe contract seeks the manufacture and delivery of a high-pressure safety relief valve rated at 3800 PSI specifically for use in defense systems, requiring strict adherence to military specifications and prior restricted source approval. The valve must meet rigorous performance and reliability standards suitable for mission-critical defense applications, with full compliance expected across design, materials, testing, and documentation. The procurement is structured as a subcontract under NAICS code 332911, indicating it involves the fabrication of other fabricated metal products, and is being managed by the DLA Dist San Joaquin under the Department of Defense. Performance is to be carried out at Tracy, California, with a zip code of 95304-5000, and responses are due by August 13, 2026, following a solicitation posted on August 2, 2026. The requirement emphasizes the need for vendors to have established qualifications for defense-related manufacturing, particularly those granted restricted source status, ensuring that only approved and vetted suppliers are eligible to compete. This contract underscores the Department of Defense’s reliance on precision-engineered components for operational safety and system integrity in defense platforms.
DLA DIST SAN JOAQUIN

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
Manufacture of Check Valve Cartridge (NSN 4820012008788)The contract requires the precision manufacturing, assembly, testing, and delivery of a single check valve cartridge compliant with military NSN 4820012008788 specifications. All aspects of production, including material sourcing, quality control, and adherence to strict form, fit, and function requirements, must meet Department of Defense standards. The work is to be performed at Hill AFB with a zip code of 84056-5734, ensuring the end product aligns with operational and logistical needs of the military supply chain. The subcontract is governed under NAICS code 332911, indicating specialized machinery manufacturing, and the response window closes on August 13, 2026, with the solicitation posted on August 2, 2026. Compliance with military specifications is non-negotiable, and successful performance will involve verified testing protocols and full documentation to ensure readiness for military use.
DEPOT HILL

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7MC-26-T-163W
The contract specifies the procurement of a safety relief valve with NSN 4820013397280 and a corresponding first article test item identified by NSN 0001S00000053, under solicitation SPE7MC-26-T-163W. The valve is designated as a critical application item with Class 3 threads and must comply with stringent technical and quality requirements referenced from the DLA Master List, including mandatory adherence to MIL-STD-1916 or ASQ H1331 sampling plans with zero non-conformances required for acceptance unless otherwise stated. All products are prohibited from containing Class I ozone-depleting chemicals, with any substitute materials requiring prior approval. Packaging and preservation must strictly follow MIL-STD-2073-1E and the special packaging instruction SPI AM12563146 dated 08/28/2024, with marking conforming to MIL-STD-129 and palletization per DLA packaging directives. The contract mandates inspection and acceptance at origin, with delivery required FOB origin within 331 days, and a strict zero variance in quantity allowed. The first article test requirement is outlined as a separate line item with a quantity of one unit, though the actual number of units to be tested is defined in FAR clauses and must be cited by offerors; failure to price this line item results in an assumed no-cost provision. The contract is a total small business set-aside under NAICS 332911, with delivery directed to the DLA Distribution San Joaquin warehouse in Tracy, CA, and all contractual obligations are governed by the revision dates and amendments referenced in the applicable technical documentation and drawings, including the latest drawing revision dated 08/28/2024.
DLA DIST SAN JOAQUIN

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SAFETY RELIEF
Solicitation # SPE7MC-26-T-163V
This contract specifies the procurement of a safety relief valve rated for 3800 PSI, designated as a critical application item with restricted sourcing requiring government engineering approval. The item must comply with stringent DLA technical and quality requirements referenced through R and I numbers in the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. Packaging and labeling must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization and unit packing strictly as defined. The valve is sourced exclusively from approved vendors including Anderson Greenwood LP, Emerson Automation Solutions, and Joy Global Underground Mining LLC, with the exact part number 0330-A01-KC3800 or equivalent. The contract includes a firm fixed price of $6.00 per unit for a total of six units, with no variance allowed in quantity. Delivery is required FOB origin, with inspection and acceptance occurring at destination after a 201-day delivery window, targeting March 3, 2027. The item is identified by NSN 4820-00-718-3026 and falls under NAICS code 332911. All packaging and shipping must follow DLA procedures including the specified freight address in Tracy, California. The contract prohibits removal of government identification from non-accepted supplies and may involve covered defense information subject to applicable controls.
DLA DIST SAN JOAQUIN

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
VALVE, BALL
Solicitation # SPE7MC-26-T-163R
The contract specifies the procurement of a single ball valve with NSN 4820-01-707-6576 and part number 21B3ET-SWO-200-02CB from ALLOY VALVES & CONTROL, INC., under solicitation SPE7MC-26-T-163R. The item must be delivered within 213 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with FOB origin terms and no tolerance for quantity variance. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and the valve must not contain any Class I ozone-depleting chemicals, with any substitutes requiring prior approval unless explicitly authorized by specifications. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, using designated methods and materials, and palletization must adhere to DLA packaging standards. The valve is to be inspected and accepted at the destination point, and transportation logistics follow DLA procedural guidelines C19 and C20. The solicitation was posted on August 2, 2026, with a response deadline of August 13, 2026, under NAICS code 332911, indicating classification for other fabricated metal product manufacturing. The contract is issued by the Department of Defense through the DDSP New Cumberland Facility, with Paula McClary listed as the primary point of contact. The unit of issue is each (EA), and the total price reflects a single unit at the listed unit price. No special marking is required beyond standard MIL-STD-129 compliance, and the designated shipping and delivery address is consistent with the DLA distribution center in Pennsylvania. The required delivery date is March 15, 2027, aligning with the original need date and confirming the strict adherence to timeline requirements.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
BALL, VALVE, PORTED
Solicitation # SPE7MC-26-T-164G
The contract pertains to the procurement of two ported ball valves, identified by NSN 4820014178455 and part number HBV-WF3-14-0007-05, supplied by B N L Industries Inc, under solicitation SPE7MC-26-T-164G. The total contract value is $2.00 for the two units, with delivery required 144 days after order placement, no later than February 22, 2027, and FOB origin terms apply. All items must be delivered to the DLA Distribution facility at 2083 Normandy Drive, Door 113 to 134, New Cumberland, PA 17070-5002, and are subject to final inspection and acceptance at the destination. Packaging must strictly comply with MIL-STD-2073-1E, including air evacuation preservation, plastic film wrapping, and use of D3 unit containers and E5 intermediate containers, with no cushioning or preservative materials needed. Marking must adhere to MIL-STD-129 with no special codes required, and palletization must follow DLA’s RP001 packaging requirements. The valve is designated as a critical application item, and the contract prohibits the use of class I ozone-depleting chemicals, as well as any intentional addition of mercury or mercury-containing compounds except in specific exempted applications such as batteries, fluorescent lights, sensors, weapon systems, or Navsea-specified reagents; portable devices containing mercury must include a second containment barrier and be shock-proof per NAVSEA 5100-003D. Compliance with the DLA Master List of Technical and Quality Requirements is mandatory, and all representations and certifications must be submitted via the DIBBS portal by August 13, 2026. The contract includes numerous FAR and DFARS clauses covering equal opportunity, combating trafficking, employment verification, sustainable products, hazardous material identification, cybersecurity safeguards including NIST SP 800-171, prohibition of hexavalent chromium, export control, electronic invoicing via WAWF, and restrictions on covered defense telecommunications equipment from Communist Chinese military companies. Payment must be processed electronically through WAWF using the DD 1155 form, and the Unique Entity ID (UEI) and CAGE code of the vendor must be provided. No quantity variance
DDSP NEW CUMBERLAND FACILITY

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SAFETY RELIEF
Solicitation # SPE7M1-26-T-244D
The contract pertains to the procurement of four safety relief valves identified by NSN 4820-99-373-6251 and part numbers G406/8058 and G406/8058/1611, supplied by KNDS Defence UK Limited and BOSCH REXROTH LTD. Delivery is required within five days of order, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and all items must comply strictly with the DLA Master List of Technical and Quality Requirements, which override any conflicting specifications. The use of Class I ozone-depleting chemicals is prohibited, and any substitute materials require prior approval unless explicitly authorized by the specification. Packaging must adhere to ASTM D3951 and MIL-STD-129 labeling standards, with palletization following DLA’s RP001 requirements. Shipping must be via the fastest traceable means, excluding parcel post, to the designated DLA depot in Texarkana, Texas. The contract is issued under solicitation SPE7M1-26-T-244D with an original required delivery date of June 29, 2026, and the unit of issue is each, priced at $4.00 per unit. The item is designated as critical for application, and all markings and documentation must include the government-controlled identifiers and codes provided in the contract.
MARITIME SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → SAN DIEGO

Same awarding agency

NAICS: 541512
New
DIBBS
Cybersecurity Compliance and Reporting ServicesThe contract seeks subcontractor services to implement and continuously monitor cybersecurity safeguards aligned with NIST SP 800-171 and ensure compliance with DFARS 252.204-7012 for the protection of covered defense information. The work requires the subcontractor to establish, maintain, and validate controls designed to secure sensitive government data within systems handling such information, with ongoing reporting and documentation to demonstrate adherence to federal cybersecurity standards. The focus is on ensuring end-to-end compliance through technical implementation, audit readiness, and real-time monitoring to mitigate risks associated with unauthorized access or data exfiltration. This is a total small business set-aside under SBA guidelines, exclusively available to small business concerns as defined by the North American Industry Classification System code 541512, which covers computer systems design and related services. The contract is managed by the Department of Defense under the San Diego office, with performance required at a location in San Diego, California, identified by the zip code 92136-3581. Interested parties must submit their proposals by the deadline of August 13, 2026, and the opportunity is posted on the DIBBS platform as a subcontract under solicitation SPE7MC26T164C.
Computer Systems Design Services

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 423490
New
DIBBS
Technical Supply Chain and NSN Fulfillment ServicesThe contract is for end-to-end supply chain management of technical items identified by NSN 4820015472456, requiring full lifecycle support from sourcing and compliance verification through packaging and final delivery to DLA San Diego. Performance is strictly localized to the 92136-3581 zip code in San Diego, ensuring all logistical activities align with Department of Defense requirements. The subcontract is set aside exclusively for small businesses under the SBA’s Total Small Business Set-Aside program, with the North American Industry Classification System code 423490 applied to define the scope of eligible contractors. Responses must be submitted by August 13, 2026, with the opportunity posted on August 2, 2026. All parties must adhere to federal acquisition regulations governing small business participation, and the contract emphasizes strict adherence to technical specifications, compliance standards, and timely delivery protocols to meet mission-critical defense supply needs.
Other Professional Equipment and Supplies Merchant Wholesalers

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 561920
New
DIBBS
Hazardous Materials Packaging and Labeling ServicesThe contract seeks qualified small businesses to provide comprehensive packaging, labeling, and documentation services for hazardous materials, with specific emphasis on mercury-containing items, in strict compliance with federal regulations and military standards. All work must adhere to the North American Industry Classification System code 561920, which covers other support activities for waste management, and the solicitation is set aside entirely for small businesses under the SBA’s Total Small Business Set-Aside provisions. The performance location is designated as San Diego, California, with a ZIP code of 92136-3581, and all deliverables must meet the rigorous safety and regulatory requirements mandated by the Department of Defense. The opportunity was posted on August 2, 2026, with a firm response deadline of August 13, 2026, and is structured as a subcontract under the DLA’s DIBBS platform. Contractors must be prepared to handle the sensitive nature of hazardous substances with precision, ensuring accurate labeling, proper containment, and full documentation in alignment with applicable federal and military protocols. While no specific point of contact is listed, interested parties must submit proposals through the designated DIBBS portal prior to the deadline to be considered for award.
Convention and Trade Show Organizers

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332913
New
DIBBS
Supply of 1/2-Inch Needle Globe ValvesThe contract calls for the procurement and delivery of three 1/2-inch needle globe valves, each rated for a maximum pressure of 1000 PSI and equipped with union ends, specifically for integration into LPD 24 reverse osmosis systems. These valves are critical components for precise flow control within high-pressure water purification infrastructure, and the specification demands strict adherence to pressure rating and connection type to ensure system integrity and operational reliability. The requirement is issued as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to bid, reinforcing a federal commitment to supporting smaller enterprises in defense-related supply chains. The solicitation was posted on August 2, 2026, and responses are due by August 13, 2026, with performance expected to take place in San Diego, California, at the ZIP code 92136-3581. The North American Industry Classification System code 332913 identifies the category as Other Fabricated Metal Product Manufacturing, indicating the valves are to be manufactured or assembled by a specialized fabricator rather than a general industrial producer. The contracting authority is the Department of Defense through its San Diego office, underscoring the military context of the procurement. All bids must be submitted through the official DIBBS portal, and compliance with technical specifications, delivery timelines, and small business certification requirements is mandatory for award consideration.
Plumbing Fixture Fitting and Trim Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
VALVE, GATE
Solicitation # SPE7MC-26-T-163S
A gate valve with a 3-inch size and 100 psi working pressure is being procured under contract SPE7MC-26-T-163S, with a requirement for 10 units to be delivered within 392 days. Manufacturing must utilize a metal casting process, necessitating specialized tooling, and suppliers are directed to contact DLA’s Aviation or Land & Maritime Supply Chains teams for assistance with sourcing, tooling, or materials. The procurement excludes MIL-V-1189 standards and the requirement for a CID plate. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revision control tied to solicitation or award dates depending on acquisition size. The valve must be supplied by authorized manufacturers including Hunt Valve Company, Inc. and Milwaukee Valve Co., Inc., with specified part numbers NB-0102E and 1305-000D, respectively. Mandatory packaging adheres to MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must comply with DLA packaging standards. Preservation methods specify AE clng/dry and no cushioning materials. Mercury and mercury-containing compounds are strictly prohibited in all phases including preservation, packaging, and marking, except for approved functional uses such as batteries or sensors specified by NAVSEA, which must include a secondary containment. Delivery is FOB origin, with inspection and acceptance occurring at destination, and no quantity variance is permitted. The NSN is 4820-00-277-9849, and delivery must be sent to DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581. The original required delivery date was March 22, 2028, though the needed ship date is July 25, 2024. Contracts are subject to DLA transportation and shipping procedures, and procurement is under NAICS code 332911 for other fabricated metal product manufacturing.
Industrial Valve Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity and Covered Defense Information SafeguardingThe contract requires the implementation of NIST SP 800-171 controls and compliance with DFARS 252.204-7012 to protect Covered Defense Information and establish the capability to report cyber incidents in accordance with Department of Defense standards. All cybersecurity measures must be fully operational to ensure the confidentiality, integrity, and availability of sensitive defense data processed, stored, or transmitted by the contractor. The contractor is obligated to maintain an active and documented security posture that aligns with federal requirements, including the ability to detect, respond to, and report cyber incidents within mandated timeframes. This subcontract, issued under NAICS code 541512 by the Department of Defense through its San Diego office, is performance-based with the primary place of performance located at 92136-3581. The solicitation was posted on July 30, 2026, with responses due by August 10, 2026, emphasizing a swift turnaround for qualified entities to demonstrate capability in meeting stringent cyber protection standards. The contract does not specify a set-aside designation and expects full compliance with all applicable cybersecurity regulations to support national defense information systems.
Computer Systems Design Services

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 541380
New
DIBBS
Packaging and Marking Compliance ServicesThe contract requires third-party verification and implementation of packaging and marking compliance with MIL-STD-129, ASTM D3951, and the DLA Master List standards, ensuring all items meet military and federal specifications for identification, labeling, and shipping documentation. This includes the validation of Unit Identification (U/I) and Quantity Unit Pack (QUP) data to guarantee accurate and consistent marking across all packaging levels, critical for logistics tracking and inventory management within the Department of Defense supply chain. The work is to be performed at a designated location in San Diego, California, with a submission deadline of August 10, 2026, and the solicitation was posted on July 30, 2026. It is classified as a subcontract under NAICS code 541380, indicating professional, scientific, and technical services related to logistics and compliance support. The contracting agency is the Department of Defense, through its San Diego office, and all activities must align with DLA’s official requirements to ensure seamless integration into military distribution systems.
Testing Laboratories and Services

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance & Labeling ServicesThe contract requires the preparation and submission of hazard communication labels and Safety Data Sheets (SDS) for federal contract materials, ensuring full compliance with OSHA’s Hazard Communication Standard (29 CFR 1910.1200) and MIL-STD-129. This work involves accurately classifying chemical hazards, generating compliant labeling that meets both federal and military standards, and producing SDS documentation that reflects current regulatory requirements. The deliverables must be precise, timely, and aligned with the Department of Defense’s specifications for hazardous materials handling and shipment documentation. The contract is structured as a subcontract under NAICS code 541620, indicating it is scoped to technical and scientific consulting services focused on environmental and safety compliance. The place of performance is designated as San Diego, CA with the ZIP code 92136-3581, and the solicitation was posted on July 30, 2026, with a response deadline of August 10, 2026. Interested parties must submit proposals before the deadline to be considered for award, and all work must be completed in accordance with federal regulations governing hazard communication and military logistics labeling requirements.
Environmental Consulting Services

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 332912
New
DIBBS
Swivel Rotolock Valve SupplyThe contract entails the procurement and delivery of twelve Swivel Rotolock Valves identified by NSN 4820015858486, with all items required to meet Department of Defense packaging, labeling, and regulatory compliance standards. The delivery is governed by FOB Destination terms, meaning the supplier assumes responsibility for the goods until they reach the designated location in San Diego, California, with a zip code of 92136-3581. The solicitation, classified as a subcontract under NAICS code 332912, is managed by the Department of Defense through its San Diego office and was posted on July 30, 2026, with responses due by August 10, 2026. All deliveries must conform strictly to military specifications and be prepared in accordance with DLA requirements to ensure seamless integration into the defense supply chain.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 541211
New
DIBBS
Small Business Subcontracting Acceleration Support (Administrative)The contract provides administrative and financial support to ensure timely compliance with accelerated payment requirements for small business subcontractors as mandated by FAR 52.232-40. This includes end-to-end processing through the Wide Area WorkFlow system and continuous tracking of payment status to guarantee that small business partners receive payments within the required accelerated timeframe. The effort is focused on maintaining rigorous documentation, resolving payment discrepancies, and coordinating with relevant financial and contracting offices to uphold regulatory standards and foster small business viability within the federal supply chain. The work will be performed in San Diego, California, under the purview of the Department of Defense, with the North American Industry Classification System code 541211 indicating an emphasis on accounting, tax preparation, bookkeeping, and payroll services. The solicitation was posted on July 30, 2026, and responses are due by August 10, 2026. This is a subcontracting opportunity, with no specific set-aside designation noted, and bidders must be prepared to deliver precise, compliant support for payment workflows that directly impact small business cash flow and contractual adherence.
Offices of Certified Public Accountants

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: NA
New
DIBBS
Commercial Item Supplier (Unspecified)This contract involves the supply of unspecified commercial items under a fixed-price arrangement, with delivery required FOB Origin to DLA Distribution in San Diego, California, at the designated ZIP code 92136-3581. Inspection and acceptance of the goods will occur at the origin point prior to shipment, meaning the supplier is responsible for ensuring compliance and quality before delivery. The contract is structured as a subcontract and was posted on July 30, 2026, with responses due by August 10, 2026. The procuring agency is the Department of Defense under the San Diego office, and no set-aside designation or NAICS code is specified, indicating potential flexibility in supplier eligibility. All terms and conditions will be governed by standard federal acquisition regulations applicable to commercial items, and the full details are accessible via the provided DIBBS link.

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance & Labeling SupportThe contract requires the preparation and submission of hazard warning labels and Material Safety Data Sheets for hazardous materials to ensure full compliance with DFARS and OSHA regulations, both before contract award and throughout performance. This work is critical for the safe handling, storage, and transportation of hazardous substances within Department of Defense operations, with all documentation needing to meet federal safety and labeling standards. The obligation to maintain ongoing compliance means the contractor must be prepared to update, revise, and resubmit documentation as material compositions or regulatory requirements change during the contract period. The contract is classified as a subcontract under NAICS code 541620, indicating it involves scientific and technical consulting services, specifically in environmental compliance and safety documentation. The place of performance is in San Diego, California, with a ZIP code of 92136-3581, and the solicitation is managed by the Department of Defense through the San Diego office. The response deadline is August 10, 2026, and the solicitation was posted on July 30, 2026, offering a limited window for potential offerors to submit proposals. There is no set-aside designation specified, meaning the subcontract is open to all eligible parties without reservation for small businesses or disadvantaged groups.
Environmental Consulting Services

POSTED

3 days ago

DEADLINE

in 8 days
View Details