Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

VALVE, GLOBE

Active
SPE7MC-26-T-143TFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of five cryogenic globe valves with brass bodies and CRES stems, each featuring a Teflon seat disk and stem seal, 1-inch socket ends, and cleaned for liquid oxygen service. These valves are designated as critical application items for use with the TMU/70 LOX cart and are identified by NSN 4820-00-071-1659 and part number 118225. The contract incorporates all technical and quality requirements from the DLA Master List of Technical and Quality Requirements, with compliance tied to the version in effect on the solicitation or award date, depending on acquisition size. Packaging must conform to MIL-STD-2073-1E and MIL-C-52211, with marking procedures aligned to MIL-STD-129 and palletization following DLA packaging standards. The unit of issue is each, with a total quantity of five units at a unit price of $5.00, totaling $25.00. Delivery is required FOB origin within 65 days, with inspection and acceptance occurring at destination, and zero variance allowed in quantity. The delivery address is the DLA Distribution San Joaquin warehouse in Tracy, California, with a required ship date of April 15, 2025, and an original delivery deadline of April 28, 2025. Transportation instructions are governed by DLAD Proc Notes C19 and C20, and the solicitation was issued under contract number SPE7MC-26-T-143T with a response deadline of August 3, 2026, and is classified under NAICS code 332911 for industrial valve manufacturing.

General Info

Five cryogenic brass valves with CRES stems, Teflon seals, 1-inch socket ends, cleaned for LOX, NSN 4820-00-071-1659, $5 each, FOB origin, delivery by April 28, 2025.

Agency

Department Of Defense → DLA DIST SAN JOAQUINView Agency

NAICS

332911 - Industrial Valve ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA DIST SAN JOAQUIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DLA DIST SAN JOAQUIN
View Agency Profile
Office AddressUS
Contacts
Marisa Thompson
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
VALVE,GLOBE
VALVE, GLOBE. CRYOGENIC, BRASS BODY, CRES STEM,
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
TEFLON SEAT DISK AND STEM SEAL, 1 IN. SOCKET
ENDS, CLEAN FOR LIQUID OXYGEN SERVICE
END ITEM: TMU/70 LOX CART
CRITICAL APPLICATION ITEM
PROVISION, INC. 14487 P/N 118225
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7009617950 0001 EA 5.000
NSN/MATERIAL:4820000711659
DELIVERY (IN DAYS):0065
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:A
PACK CODE:U
SPE7MC-26-T-143T
SECTION B
PR: 7009617950 PRLI: 0001 CONT’D
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PACKAGING SHALL BE IAW MIL-C-52211.
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:04/15/2025 Original Required Delivery Date:04/28/2025
SPE7MC-26-T-143T NSN/Part Number: 4820-00-071-1659 Quantity: 5 EA Purchase Request: 7009617950QTY: 5 Delivery: 65 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332911
New
DIBBS
VALVE, STOP-CHECKThe item is an in-line stop-check globe valve with a 1.250 inch size, classified as Class B and featuring a nitrile bonnet o-ring material. Each valve must have a securely attached identification plate displaying CID 883031887, and union tailpiece assemblies are explicitly excluded. The valve is manufactured using a metal casting process requiring specialized tooling, and sourcing or production inquiries must be directed to the appropriate DLA engineering support teams for aviation, land, or maritime supply chains. The valve is subject to export control under either ITAR or EAR regulations, meaning technical data associated with it cannot be disclosed to foreign persons, including foreign nationals within the U.S., without prior authorization from the Department of State or Commerce, in accordance with DFARS 252.225-7048. Access to this controlled data is restricted to DLA contractors with approved US/Canada Joint Certification Program credentials, completed DOD export control training, and formal approval from DLA. The NSN is 4820-01-443-8647 with a quantity of 36 units required under purchase request 7016087592. Delivery is due in 201 days after award. The solicitation, numbered SPE7MC-26-T-143P, was posted on July 21, 2026, with responses due by August 3, 2026, and is designated as a total small business set-aside under NAICS code 332911. The contracting activity is the Department of Defense through the New Cumberland facility, with Jason Endress listed as the primary point of contact.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
DISK, VALVEThe contract is for the procurement of eight DISK, VALVE units with NSN 4820-01-668-8394 and part number 803-7526487-L05WXSX1C-012, governed by technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, which take precedence over all other standards including ASTM D3951. The item is classified as a critical application item and must comply with all applicable DLA packaging directives, including MIL-STD-129 for labeling and RP001 for palletization, while strictly prohibiting the use of Class I ozone-depleting chemicals unless explicitly authorized by specifications. Delivery is FOB origin, with inspection and acceptance occurring at the point of origin, and no quantity variance is permitted. Packaging must adhere to approved standards, and all units must be prepared for shipment in accordance with specified unit of issue and quantity per unit pack provisions. The delivery window is 97 days from contract award, with a required ship date of January 13, 2026, and an original delivery deadline of March 2, 2026. All shipments are to be directed to the DLA Distribution facility at New Cumberland, Pennsylvania, as outlined in the provided parcel post and freight addresses, and transportation logistics must follow DLAD Proc Notes C19 and C20. Solicitation SPE7MC-26-T-144C is open to full and open competition under NAICS code 332911, with responses due by August 3, 2026, and primary point of contact is Marisa Thompson at DLA.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SAFETY RELIEFThis contract specifies the procurement of a safety relief valve identified by NSN 4820-01-317-5252 and part number R10AG1G1BN-BM3 D51017, supplied by Hunt Valve Company, Inc. A total quantity of seven units is required under a firm fixed price arrangement with no tolerance for variance in quantity, and delivery must be completed within 300 days after the award date. Inspection and acceptance occur at the destination, with the point of origin as the FOB location. The item is designated as a critical application item, requiring strict adherence to technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements. Packaging must comply with MIL-STD-2073-1E and DLA’s Packaging Requirements, including specific methods for preservation, wrapping, cushioning, and marking per MIL-STD-129 without special markings. Mercury or mercury-containing compounds are prohibited unless explicitly exempted for functional components such as batteries, fluorescent lamps, or weapon systems, and any exempted items must include a secondary containment and meet NAVSEA 5100-003D standards. The delivery destination is the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, and transportation instructions are governed by DLAD Proc Notes C19 and C20. The contract was solicited under SPE7MC-26-Q-0395, with a response deadline in August 2026 and a required ship date of May 28, 2027.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 13 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332911
New
DIBBS
FLANGE, GLAND, VALVEThe contract pertains to the procurement of 22 units of FLANGE, GLAND, VALVE with NSN 4820-01-530-3492 under solicitation SPE7MC-26-T-143V, issued by the Defense Logistics Agency through the Department of Defense’s New Cumberland facility. Delivery is required within 75 days after order placement, and responses to the solicitation were due by August 3, 2026. The item is subject to stringent export control regulations under either ITAR or EAR, meaning any disclosure of associated technical data to foreign persons, whether inside or outside the United States, requires prior authorization from the Department of State or Commerce. This restriction extends to foreign national employees and subsidiaries of U.S. companies. Access to the controlled technical data is restricted exclusively to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DLA training and questionnaire submissions and received formal approval from DLA. The contract falls under NAICS code 332911 and is administered through the DLIBBS system with primary point of contact Marisa Thompson.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
ADAPTER, BATTERY TERMINThe contract pertains to the procurement of 468 units of an adapter, battery terminal, identified by NSN 5940-01-697-1618 and part number 869TP-8TT-2, under solicitation SPE4A7-26-T-586Z. Delivery is required FOB origin within 171 days, with a final delivery deadline of April 9, 2027, and a need ship date of January 17, 2027. The quantity is fixed with zero variance allowed, and inspection and acceptance occur at the destination warehouse in Tracy, California. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R-series identifiers, which supersede any other standards such as ASTM D3951. Packaging must comply with MIL-STD-129 and DLA packaging requirements, with palletization following RP001, and labeling and marking adhering to physical identification standards. Sampling plans must align with MIL-STD-1916 or ASQ H1331, using zero non-conformances unless otherwise specified, and attributes are to be classified with specific verification levels or AQLs. The supplier must meet documentation requirements for source approval, inspection at origin, and use of calibrated measuring equipment. The unit of issue is each, and transportation logistics follow DLA procedural notes C19 and C20. The point of contact for the contract is Wendy Jones, with all correspondence routed through the DLA San Joaquin distribution center.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332911
New
DIBBS
DISK, VALVEThe contract pertains to the procurement of a DISK, VALVE with part number 793600-2 and NSN 4820-01-319-1402, for a quantity of three units, to be delivered FOB origin within 171 days of award. Technical and quality compliance is governed by the DLA Master List of Technical and Quality Requirements, with revisions effective on the solicitation issue date controlling for this simplified acquisition. The item is designated a critical application item and must adhere to strict inspection and sampling protocols per MIL-STD-1916 or ASQ H1331, with zero non-conformances required unless otherwise stipulated; attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA Packaging Requirements, and all markings in accordance with physical identification guidelines. Unit of issue is EA, with no variance allowed in quantity. The item is not subject to Item Unique Identification per customer request, though all other marking and labeling requirements remain in force. Cybersecurity compliance requires a CMMC Level 2 self-assessment, and covered defense information provisions apply. Delivery is directed to the DLA Distribution Depot in Tinker AFB, Oklahoma, with shipping and transportation procedures governed by DLAD Proc Notes C19 and C20. The contract was issued under solicitation SPE4A6-26-T-08ME, with a response deadline of July 29, 2026, and the original required delivery date set for April 18, 2028.
ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332911
New
DIBBS
COUPLING, ACTUATOR-HThe contract pertains to the procurement of three units of a coupling actuator-h, identified by NSN 4820-01-719-0116, under solicitation SPE7MC-26-T-144E, with a required delivery within 63 days of award. This is a restricted source item manufactured exclusively to the original equipment manufacturer’s drawing, and only the prequalified supplier(s) listed in the solicitation are eligible to respond unless alternative manufacturers submit comprehensive technical data for evaluation per DLAI 3200.1, Enclosure 6. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation or award date depending on the acquisition size. All delivered items must comply with DLA packaging standards and must not contain any Class I ozone-depleting chemicals, a prohibition that overrides any conflicting specification language without relaxing product performance requirements; any substitute chemicals require prior approval. The item is to be delivered to New Cumberland, Pennsylvania, with the primary point of contact being Chad Zernis of the Department of Defense’s DDSP New Cumberland Facility.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SOLENOIDThe contract pertains to the procurement of a solenoid valve with NSN 4810016483944, issued by the Defense Logistics Agency under solicitation SPE7MC-26-T-143N. Three separate line items each specify one unit to be delivered to different U.S. Navy ships—the USS Somerset LPD 25, USS Arlington LPD 24, and USS John P. Murtha LPD 26—with delivery required within 20 days of order placement and FOB destination terms. The items are each priced at $1.00 with zero quantity variance allowed, and acceptance occurs at the delivery point after inspection. Packaging and preparation must comply with MIL-STD-2073-1E, including preservation method 41, unit container E5, and marking per MIL-STD-129 with no special markings required. Palletization follows DLA’s RP001 packaging requirements, and mercury or mercury compounds are strictly prohibited in preservation, packaging, or marking. Shipping must be conducted via the fastest traceable means; parcel post is forbidden. The original required delivery date is July 16, 2026, for one unit and July 20, 2026, for the others. Compliance with the DLA Master List of Technical and Quality Requirements is mandatory, and vendors must use the Vendor Shipping Module for freight shipments. The procurement is categorized under NAICS 332911 and is open to federal suppliers with a response deadline of August 3, 2026.
Defense Logistics Agency

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
VALVE, BALLA ball valve, one inch in size with plastic polyvinyl chloride and socket ends, is being procured under contract SPE7MC-26-T-143G by the Defense Logistics Agency for delivery to the USNS EARL WARREN T-AO 207 at FPO AP 96691-2900. The item, identified by NSN 4820-01-371-1284 and manufacturer part number TB1100ST from Haywardindl. Products Inc., requires a strict quantity of ten units with no variance allowed. Delivery must be completed within twenty days of contract award, with free on board terms at destination and inspection and acceptance also occurring at the delivery point. Packaging must comply with MIL-STD-2073-1E and DLA’s packaging requirements, including marking in accordance with MIL-STD-129 and no special marking codes. The valve must be free of intentional mercury or mercury-containing compounds except for specific exempted applications like batteries, fluorescent lights, sensors, weapon systems, or naval chemical reagents, and any portable mercury-containing items must be shockproof with secondary containment as per NAVSEA 5100-003D. All technical and quality standards referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements effective on the solicitation issue date. The contract specifies unit pricing at $10.00 per unit for a total value of $100.00, with a required delivery date of July 17, 2026, and includes transportation protocols outlined in DLAD PROC NOTES C19 and C20. The procurement is subject to federal acquisition regulations and is administered through the DLA’s eProcurement system with primary point of contact Paula McClary.
Defense Logistics Agency

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
PARTS KIT, BUTTERFLYThis contract specifies the procurement of a Parts Kit for a Butterfly Valve under solicitation SPE7MC-26-T-144B, with a total quantity of five kits (KT), each identified by NSN 4810-01-535-5367 and vendor part number 80252 from ONTIC ENGINEERING & MANUFACTURING, INC. Delivery is required within 367 days FOB origin, with no variance allowed in quantity, and inspection and acceptance occur at the destination. The kit must be packaged and preserved in accordance with MIL-STD-2073-1E, Appendix D, for kits, requiring that all loose hardware be sealed within individual containers using the highest applicable preservation method to prevent corrosion or damage, and must not be shipped in bulk. Each kit must include a detailed parts list with part names, numbers, and quantities. Packaging must comply with MIL-STD-129 for marking, include the special marking instruction “OPEN THIS SIDE,” and be palletized as per DLA’s requirements. The unit of issue is officially KT (Kit) effective October 1, 2014, and all packaging methods must ensure the kit arrives in serviceable condition without requiring downstream sorting. The contract is issued under the Department of Defense through Depot Oklahoma at Tinker AFB under a Total Small Business Set-Aside, with a North American Industry Classification System code of 332911. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced via R and I numbers, and the applicable revision is determined by the solicitation or award date. Preservation and packaging must meet the latest version of MIL-STD-2073-1D to protect the most critical component within the kit, and all components must be securely contained to avoid physical damage such as dents, scratches, or nicks. The contract was posted on July 21, 2026, with a response deadline of August 3, 2026, and primary point of contact is Marisa Thompson at the DLA office. Compliance with these specifications is mandatory to ensure readiness, logistics efficiency, and operational functionality upon receipt.
DEPOT OKLAHOMA

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
VALVE, THROTTLE
PUGET SOUND

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SOLENOID
MARITIME SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → DLA DIST SAN JOAQUIN

Same awarding agency

New
DIBBS
BATTERY, STORAGEThis contract pertains to the procurement of nickel cadmium battery storage units designated by NSN 6140-00-578-4935 and part number 22378-001, supplied by MARATHONNORCO AEROSPACE, INC. The total quantity required is 14 units, divided into two line items of five and nine units respectively, to be delivered within 60 days of award. The pricing structure is firm fixed price with zero variance allowance, and both inspection and acceptance occur at the destination. The batteries are classified as a critical application item with a non-extendable shelf life of 36 months, designated as Type I, requiring special marking per code 32. Strict packaging and marking standards under MIL-STD-2073-1E and MIL-STD-129 must be followed, including palletization per DLA’s RP001 requirements, with hazardous material handling governed by IP025. Sampling for quality control shall adhere to MIL-STD-1916 or ASQ H1331 Table 1 using zero-conformance acceptance criteria unless otherwise specified, with attributes assigned verification levels or AQLs as defined. Mercury and mercury compounds are prohibited except in designated functional uses such as batteries, with additional containment and shock-proof requirements for portable devices. All technical and quality requirements referenced are governed by the DLA Master List, with the applicable revision determined by acquisition size and solicitation timeline. Delivery is directed to DLA San Joaquin in Tracy, CA, with transportation details outlined in DLAD procedural notes.

POSTED

about 13 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332999
New
DIBBS
SAFETY CAN
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332913
New
DIBBS
DRAIN, FLOORThe contract is for 60 units of a floor drain with NSN 4510-00-945-7790, under purchase request 7017575687, with a total required quantity of 210 units to be delivered within 200 days after award. The solicitation is numbered SPE8E8-26-T-4775, posted on July 21, 2026, with responses due by August 3, 2026, and is a total small business set-aside under NAICS code 332913. The placing agency is DLA Dist San Joaquin under the Department of Defense, with performance located in Tracy, California, 95304-5000, and primary point of contact is Alexis Selby at alexis.selby@dla.mil or 3124448487. The item involves technical data subject to export controls under either ITAR or EAR, meaning any disclosure to foreign persons, including those within the United States or at foreign subsidiaries of U.S. companies, requires prior authorization from the Department of State or Department of Commerce. Compliance with DFARS 252.225-7048 is mandatory, and only contractors with approved US/Canada Joint Certification Program certification, completed DOD export-controlled data training, and cleared by DLA through the online questionnaire are permitted to access the controlled technical data.
Plumbing Fixture Fitting and Trim Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336310
New
DIBBS
CONNECTING ROD ANDThe contract solicitation is for 62 connecting rods and bearing assemblies with NSN 4820-01-281-5945, under solicitation number SPE7MC-26-T-143X, issued by the Defense Logistics Agency District San Joaquin. The requirement is a total small business set-aside under NAICS code 336310 with a response deadline of August 3, 2026, and delivery expected within 145 days after contract award. Technical data associated with this item is subject to export control under either ITAR or EAR, including restrictions on disclosure to foreign persons regardless of location, and DFARS 252.225-7048 applies. Only contractors with approved US/Canada Joint Certification Program status, who have completed mandatory DOD export control training and the DLA questionnaire, may access this controlled data. The placing of performance is in Tracy, California, and all cybersecurity requirements mandate CMMC Level 2 certification for any third-party assessors involved. Packaging must comply with DLA procurement standards, and the point of contact is Marisa Thompson at the provided email and phone number.
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
VALVE, REGULATING, FL
Industrial Valve Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance (CUI Safeguarding)The contract requires strict adherence to the cybersecurity requirements outlined in FAR clause 252.204-7012 to protect Controlled Unclassified Information (CUI) related to technical and logistics data. This includes implementing specific security controls to safeguard CUI on information systems, ensuring timely reporting of any cyber incidents that may compromise the integrity, confidentiality, or availability of such data, and maintaining documentation to demonstrate compliance with all applicable federal standards. The subcontract is tied to operations at the specified performance location in Tracy, California, with a zip code of 95304-5000, and falls under the NAICS code 541512 for computer systems design services. The solicitation was posted on July 20, 2026, with a response deadline of July 23, 2026, indicating a rapid turnaround for proposals. The contracting activity is under the Defense Logistics Agency San Joaquin, part of the Department of Defense, emphasizing the critical nature of cybersecurity protections for defense-related information. As a subcontract, the responsibilities for CUI safeguarding and cyber incident reporting cascade from the prime contract, requiring the subcontractor to align fully with the government’s cybersecurity framework. All systems handling CUI must meet the NIST SP 800-171 standards, and the recipient must be prepared to demonstrate compliance upon request, including through audits or assessments.
Computer Systems Design Services

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 385110
New
DIBBS
Packaging and Preservation Services (MIL-STD-2073-1E)The contract requires the provision of military-grade packaging, preservation, and marking services strictly compliant with MIL-STD-2073-1E and MIL-STD-129 standards to ensure the safe transport and long-term storage of breathing apparatus. All work must meet rigorous defense specifications for protection against environmental factors, handling stresses, and degradation during extended storage and deployment scenarios. The services must include appropriate materials, labeling, documentation, and process controls to guarantee readiness and traceability throughout the supply chain. This subcontract is issued by DLA DIST SAN JOAQUIN under the NAICS code 385110, with performance required at Tracy, California, ZIP 95304-5000. The solicitation was posted on July 20, 2026, and responses are due by July 23, 2026, indicating a tight turnaround for qualified vendors to submit proposals. The work is critical to maintaining operational readiness of military equipment and demands strict adherence to federal military standards without exception.

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & Labeling SpecialistThe contract requires specialized services to ensure full hazard communication compliance for breathing apparatus that contain potentially hazardous components, including the preparation of safety data sheets, accurate hazard labeling, and all necessary regulatory documentation for safe shipping. This work must align with federal and international standards governing the transportation of hazardous materials, with deliverables tailored to meet defense-specific requirements. The performance location is in Tracy, California, with a zip code of 95304-5000, and the project falls under NAICS code 541690 for other scientific and technical consulting services. This is a subcontract opportunity issued by the Defense Logistics Agency San Joaquin under the Department of Defense, with a solicitation posted on July 20, 2026, and a strict response deadline of July 23, 2026. The provider must demonstrate expertise in hazardous materials compliance, particularly as it relates to respiratory equipment containing regulated substances, and be prepared to submit complete documentation meeting all applicable transportation and labeling regulations. The role demands precision in documentation and adherence to timelines, as noncompliance could delay delivery and compromise mission readiness.
Other Scientific and Technical Consulting Services

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 339113
New
DIBBS
Manufacturer of Breathing Apparatus (NSN 4240015791027)The contract calls for the manufacture and supply of 60 units of breathing apparatus specified under military standards and aligned with OEM requirements for Scott Technologies part number 200822-02, identified by NSN 4240015791027. The equipment must meet all technical and quality benchmarks established by the Department of Defense and be delivered to the designated place of performance in Tracy, California, with ZIP code 95304-5000. The solicitation is structured as a subcontract under NAICS code 339113, indicating the industrial classification for other miscellaneous fabricated metal product manufacturing, and is managed by DLA Dist San Joaquin, a logistics arm of the Department of Defense. Responses are due by July 23, 2026, with the announcement posted on July 20, 2026, allowing a limited window for interested parties to submit proposals. All units must be fully compliant with the referenced military specifications and original equipment manufacturer standards to ensure operational readiness and interoperability within defense systems.
Surgical Appliance and Supplies Manufacturing

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 423990
New
DIBBS
Commercial Item Supply (Unspecified Materials)The contract seeks the supply of commercial items with specific requirements for compliant packaging and labeling, ensuring all delivered goods meet regulatory and operational standards. Delivery must be fulfilled under FOB Destination terms within 480 days from the date of order, placing responsibility for transportation and risk on the supplier until the items reach the designated location in Tracy, California, with a zip code of 95304-5000. The solicitation is classified as a subcontract under NAICS code 423990, indicating it pertains to other merchant wholesalers of miscellaneous durable goods, and is being managed by the DLA Dist San Joaquin under the Department of Defense. The opportunity was posted on July 20, 2026, with responses due by July 31, 2026, and no set-aside provisions or specific organizational type requirements are indicated. All parties must adhere to the delivery timeline and compliance standards without exception.
Other Miscellaneous Durable Goods Merchant Wholesalers

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 541512
New
DIBBS
Secure Handling of Covered Defense Information (CDI)The contract requires implementation of NIST SP 800-171 controls and compliance with DFARS 252.204-7012 to protect Covered Defense Information (CDI) throughout its handling, storage, and transmission. This includes establishing robust cybersecurity measures to prevent unauthorized access, ensuring data integrity, and maintaining accountability for all systems processing CDI. The contractor must also have procedures in place to detect, report, and respond to cyber incidents affecting CDI within the mandated timeframes, coordinating fully with the Department of Defense as required. The work is structured as a subcontract under NAICS code 541512, with performance located in Tracy, California, zip code 95304-5000. The contract was posted on July 20, 2026, and responses are due by July 31, 2026, with the issuing agency being DLA Dist San Joaquin under the Department of Defense. Full compliance with federal cybersecurity standards is mandatory to meet the terms of the agreement and ensure the secure management of sensitive defense data.
Computer Systems Design Services

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 488999
New
DIBBS
Hazardous Materials Handling and LabelingThe contract requires the identification, labeling, and preparation of hazardous materials for shipment in full compliance with OSHA’s Hazard Communication Standard 29 CFR 1910.1200 and MIL-STD-129 for military packaging and labeling requirements. All materials must be accurately classified and documented according to federal regulations, including the submission of Safety Data Sheets under Federal Standard No. 313 to ensure proper handling, transportation, and regulatory adherence. The work is to be performed at the designated place of performance in Tracy, California, with a zip code of 95304-5000, and must align with the North American Industry Classification System code 488999, which covers other support activities for transportation. This is a subcontract opportunity issued by the DLA Dist San Joaquin under the Department of Defense, with a response deadline of July 31, 2026, and an posted date of July 20, 2026, indicating a short window for proposal submission.
All Other Support Activities for Transportation

POSTED

1 day ago

DEADLINE

in 9 days
View Details